Where communities thrive


  • Join over 1.5M+ people
  • Join over 100K+ communities
  • Free without limits
  • Create your own community
People
Activity
    typ1-brods
    @typ1-brods
    Argh! Stupid mobile... What I wanted to write: I think the Github terms should not be translated because github is in EN
    Milos Kozak
    @MilosKozak
    RC7 looks very good so far. there will be maybe RC8 just to prove everything is ok but i'm expecting 2.0 very soon
    could you take care about docs? describe new features and prepare some transition guide from 1.58 to 2.0
    i believe most is already done
    peterleimbach
    @peterleimbach
    I would like to update the Nightscout and how to update to a new version pages under next week. Okay or someone working on this already?
    typ1-brods
    @typ1-brods
    The release notes are integrated since a couple of weeks (https://androidaps.readthedocs.io/en/latest/EN/Installing-AndroidAPS/Releasenotes.html). I just added some v2.0 content and made a PR. Those of you with better english: please review :-)
    typ1-brods
    @typ1-brods
    Please note to avoid double working: There is a German draft for a new openAPS features page (https://androidaps.readthedocs.io/en/latest/EN/Usage/Open-APS-features.html) incl. SMB. Some people are translating it at the moment to EN.
    AdrianLxM
    @AdrianLxM
    :+1:
    Milos Kozak
    @MilosKozak
    thanks
    Milos Kozak
    @MilosKozak
    Configuration on demand is not supported by the current version of the Android Gradle pluginCould anyone add hint to wiki
    expecting 2.0 in a few days. is the 2.0 transition page ready?
    typ1-brods
    @typ1-brods
    I think transition page "release notes" and new "openaps features" page for v2 are ready.
    Jill Gordon
    @jgordon5
    Under advancd Absorption settings , I am trying to find info on what interval for autosens (h) means and what it should be. Currently it is set at 4 but I cannot find an explanation for what this means exactly. Can anyone help please? Thanks.
    viq
    @viq
    @jgordon5 which autosens algorithm are you using?
    Jill Gordon
    @jgordon5
    @viq weighted average and I'm using SMB.
    viq
    @viq
    @jgordon5 I left mine at 24h, here's kinda a starting point for reading https://androidaps.readthedocs.io/en/latest/EN/Configuration/Sensitivity-detection-and-COB.html
    Jill Gordon
    @jgordon5
    Thanks @viq. Mine was set at 4 so I left it at 4! I'll read the link.
    Vlin-der
    @Vlin-der

    I noticed a part of the page is missing at the Dutch page. All the way to the bottom, the Netherlands-specific links are not visible (ironically!):
    https://androidaps.readthedocs.io/en/latest/CROWDIN/nl/Where-To-Go-For-Help/Connect-with-other-users.html

    They do appear at the English page:
    https://androidaps.readthedocs.io/en/latest/EN/Where-To-Go-For-Help/Connect-with-other-users.html

    In Crowdin it does show up (translated and approved). Any ideas what could be going on?

    Vlin-der
    @Vlin-der
    Ah, never mind. It seems to have fixed itself!
    yiyoMX
    @yiyoMX
    Hi all, is there a plug-in to use AndroidAPS as the CGM receiver? Does anybody knows the reason not to use the same app as the receiver? RileyLink hardware is capable of acting as a CGM receiver and pump TX/RX
    Milos Kozak
    @MilosKozak
    Ask in rileylinkaaps group
    yiyoMX
    @yiyoMX
    Thanks @MilosKozak
    Marie
    @MarieT1D
    In the OpenAPS blog from Dana, she writes About Eating Soon/Activity Mode while setting a temp target AND temp target changes sensitivity enabled. I want to write more about to the second feature (and write how much the sensitivity gets changed). Long Story, but that is why I was wondering if I should seperate Eating Soon Temp Target and Eating Soon Mode oder if both is the same or if I should make a difference in the wiki
    Milos Kozak
    @MilosKozak
    @danamlewis
    Dana Lewis
    @danamlewis

    @MarieT1D eating soon is achieved by setting a lower temp target. There’s a separate set of settings that adjust sensitivity if a high/low target is set

    Loop users use “low target” synonymous with “eating soon”, but I’d recommend being clear about enabling the advanced features where a high/low target then effects both the target and sensitivity adjustments .

    If you look at the OpenAPS docs, we have those features listed as separate advanced exercise related fpreferences to differentiate them

    ..all that to say, not sure if I answered your intended question or not; let me know if this helped or you still need more info
    Marie
    @MarieT1D
    @danamlewis perfect, thanks, that was what I wanted to hear :D
    Dana Lewis
    @danamlewis
    Phew! 😅
    yiyoMX
    @yiyoMX
    Hi, Im getting an error that says: "Value current_basal is out of hard limits 0.00 limited to 0.001" and loop refuses to run, can someone help me?
    viq
    @viq
    @yiyoMX check your profile, sounds libre toy have basal set to 0?
    yiyoMX
    @yiyoMX
    Hi @viq, what do you mean with libre toy?
    viq
    @viq
    Argh, auto correct strikes again. "Sounds like you have basal set to 0"
    yiyoMX
    @yiyoMX
    @viq on the app or on the pump? because sometimes AAPS sets the basal to 0....
    Milos Kozak
    @MilosKozak
    it's not about temporary basal but AAPS is complaining regarding base basal rate set to 0
    martinjmoore
    @martinjmoore
    Hi, I'm building on a Mac. All done except I don't have an 'OpenLoop' option (which is the one I want). I only have these options: fullDebug
    fullRelease
    nsclient2Debug
    nsclient2Release
    nsclientDebug
    nsclientRelease
    pumpcontrolDebug
    pumpcontrolRelease
    Milos Kozak
    @MilosKozak
    Build Full
    martinjmoore
    @martinjmoore
    Great, thanks.
    wootmaster
    @wootmasterslick
    Hi I noticed that when building APK acc to this guide https://androidaps.readthedocs.io/en/latest/EN/Installing-AndroidAPS/Building-APK.html it was missing a step. After using the GIT clone and when I the project I got an error with latest AAPS v2.3 and I needed to restart Android Studio to get the app to build.
    It might be a good idea to add the step to restart to the wiki. Personally I spent quite some time figuring out if I did something wrong while it was a very easy fix.
    Sebastian Lenz
    @quizzmaster
    There is no need to restart Android Studio.
    If you follow the steps on the wiki everything should be fine. Otherwise look at the troubleshooting section for solutions to several issues which came up occasionally
    flockstar
    @flockstar
    I've installed android studio and tried to import project from gradle. It gets to configure build and then errors with something not in the guide "ERROR: There are uncommitted changes or git system is not available. Clone sources again as described in wiki and do not allow gradle update" I'm not sure how to not allow gradle update. Any help appreciated.
    Milos Kozak
    @MilosKozak
    go to FB page for this kind of support
    Marie
    @MarieT1D
    @danamlewis Is there a reason why you started with mostly markdown (.md) files instead of ReStructuredText (.rst). Just asking, because RTD recommends .rst
    Dana Lewis
    @danamlewis
    Might’ve been what we had used originally, and I think rtd also had some limited formatting options for rst in the beginning - this may have improved since then?
    Marie
    @MarieT1D
    Thanks, now I know :) I found this warning in the RTD-Guide if you are interested: https://docs.readthedocs.io/en/stable/intro/getting-started-with-sphinx.html#using-markdown-with-sphinx. But it seems like both works well enough :)
    tobimo81
    @tobimo81
    Hi. Does anyone know why my androidaps App is not marking my objective "bg data to nightscout" as done? I can see all my data when I open my personal URL at herokuapp and can create reports.
    Milos Kozak
    @MilosKozak
    ask on FB page
    tobimo81
    @tobimo81
    therefore I have to create a FB account first ;/ ok, thx