Where communities thrive


  • Join over 1.5M+ people
  • Join over 100K+ communities
  • Free without limits
  • Create your own community
People
Activity
    Ryan P
    @ryan.pfl_gitlab
    PSU is working, tested everything with the included led tester thing, go to config and no leds light up
    i am getting video input from the capture card
    i have ground on pi, correct pin, green wire to the correct pin, ground is connected to ground of the LED strip that goes into the PSU
    two extra power and ground not connected to anything (on the led strip that came that way)
    Ryan P
    @ryan.pfl_gitlab
    not sure what's wrong
    Andrew MacPherson
    @AndrewMohawk
    okay cool, lets figure it out
    19 replies
    Can you get a shell on the pi
    then do journalctl -f -u aurora& which will put logging into the background
    and then do service aurora restart and we can see if there are any issues in the starting of it
    Ryan P
    @ryan.pfl_gitlab
    sure just a sec
    ok its a lot
    Andrew MacPherson
    @AndrewMohawk
    just put it in a thread here
    just moving it out that thread, I suspect what happened is it tried to start (maybe something was wrong) so when you "restarted" it the service actually worked
    Andrew MacPherson
    @AndrewMohawk
    What kind of HDR do you have? Atm this wont work with Dolby Vision because that is proprietary so they cant "decode" and downscale that image
    Ryan P
    @ryan.pfl_gitlab
    HDR 10
    samsung Q80T
    Andrew MacPherson
    @AndrewMohawk
    oh, naa HDR10 should definitely work cause I have it on my LG C9
    Ryan P
    @ryan.pfl_gitlab
    it was working before, Appletv 4k
    Andrew MacPherson
    @AndrewMohawk
    I have definitely got HDR working with both the cheaper and the more expensive HDMI splitter
    Ryan P
    @ryan.pfl_gitlab
    yeah
    can I share images on here?
    Andrew MacPherson
    @AndrewMohawk
    you can test the cables individually, but if thats still not working there must be something else, maybe a firmware version
    Is it working?
    Ryan P
    @ryan.pfl_gitlab
    yeah it's working
    all new hdmi cables, but i wonder if the mono price isn't that good
    Andrew MacPherson
    @AndrewMohawk
    woohoo! The first person to build it
    the mono price?
    using these
    they worked 444 and HDR10 before the splitter
    Andrew MacPherson
    @AndrewMohawk
    then they should work after the splitter too
    oh, what mode is the splitter in?
    Ryan P
    @ryan.pfl_gitlab
    the switch on the front says off
    Andrew MacPherson
    @AndrewMohawk
    which one do you have?
    Ryan P
    @ryan.pfl_gitlab
    the more expensive model you linked
    ezcoo
    Andrew MacPherson
    @AndrewMohawk
    okay, lemme go flash mine back to factory to get the same setup
    Ryan P
    @ryan.pfl_gitlab
    SP12HAS
    Andrew MacPherson
    @AndrewMohawk
    but all the cables in this worked before for HDR10@4K ?
    Ryan P
    @ryan.pfl_gitlab
    correct
    let me double check to make sure im using all the same cables
    Andrew MacPherson
    @AndrewMohawk
    well just that each of the two between input and switch and switch and TV are good :)
    Ryan P
    @ryan.pfl_gitlab
    yeah all three cables are MP
    i ordered this
    will be in tomorrow
    see if that fixes anything
    i'm seriously the first one to build this? that's crazy haha
    Andrew MacPherson
    @AndrewMohawk
    oh, I see on the back of this splitter there is a step by step for how to get the right EDID