Where communities thrive


  • Join over 1.5M+ people
  • Join over 100K+ communities
  • Free without limits
  • Create your own community
People
Repo info
Activity
  • Feb 19 23:54
    rlebeau edited #287
  • Feb 19 23:53
    rlebeau edited #287
  • Feb 19 23:39
    rlebeau labeled #287
  • Feb 19 23:39
    rlebeau labeled #287
  • Feb 19 23:39
    rlebeau assigned #287
  • Feb 19 23:39
    rlebeau opened #287
  • Feb 19 18:01

    rlebeau on master

    some duplicates remove AND some… (compare)

  • Feb 19 18:01
    rlebeau closed #286
  • Feb 19 02:13
    nanashisutesoute opened #286
  • Feb 17 08:25
    Athris closed #285
  • Feb 15 01:00

    rlebeau on master

    Fixing a typo in IdCTypes.pas (compare)

  • Feb 15 00:46

    rlebeau on master

    Move tweaks for IdCTypes.pas (compare)

  • Feb 14 23:58

    rlebeau on master

    Adding {$WARN SYMBOL_PLATFORM O… (compare)

  • Feb 14 23:51
    rlebeau commented #285
  • Feb 14 23:50

    rlebeau on master

    Adding .dproj files for Delphi … (compare)

  • Feb 14 20:27

    rlebeau on master

    Fix for compiler error in TIdSt… (compare)

  • Feb 14 19:03

    rlebeau on master

    Minor formatting tweaks to IdCT… (compare)

  • Feb 14 18:50

    rlebeau on master

    Add alias for C size_t type and… (compare)

  • Feb 14 18:50
    rlebeau closed #282
  • Feb 14 18:44
    rlebeau labeled #285
Sam B
@SamBirnbaum
@rlebeau I guess its time to reload Indy10 and hope it works.
@rlebeau really appreciate all the help and effort you made in this regards. Thank you very much.
Sam B
@SamBirnbaum
@rlebeau Hi, sorry to bother you again, based on the instructions, I was looking for the batch command file FULLD_XE5 inside the zip file in the lib folder. Not there. There is FULLC_XE5.bat that looks for c++ only. Is that an oversight, is there another automated way to do this ?
Remy Lebeau
@rlebeau
@SamBirnbaum Indy stopped using command-line scripts for Delphi in like 2010, they are only needed for C++Builder. For Delphi, you can just open and install the projects directly from the IDE.
Sam B
@SamBirnbaum
@rlebeau Ok, is the dpk package #190 the correct one for xe5?
Remy Lebeau
@rlebeau
@SamBirnbaum yes
Sam B
@SamBirnbaum
@rlebeau Thank you. You and the rest of the Indy team are great. Thanks for taking the time doing this. If there is anything that I ever help you with, don't hesitate to email me.
Sam B
@SamBirnbaum
@rlebeau Quick question, I have the version of XE that includes C++. Do I run the FULLC_XE5 batch control as well ? and if so do I run that first ? thanks again
Sam B
@SamBirnbaum
@rlebeau Hi, Trying to follow the instructions that I downloaded and I am running into a problem. I removed Indy10 from the IDE, removed all the associated files from all the folders. I opened IndySystem190.dpk and I compiled it. It is not generating the bpl file so that the next step compiling IndyCore190.dpk can't find the IndySystem190. What am I doing wrong - Need help
Remy Lebeau
@rlebeau
@SamBirnbaum Yes, it should be generating the BPLs. It likely just puts it where you are not expecting. Did you search the IDE's normal output paths? Like %MyDocuments%\RAD Studio\<version>\Bpl? Since you are dealing with C++, you might consider trying Malcolm Smith's precompiled binaries (http://www.mjfreelancing.com/indy.htm). It is not the absolute lately SVN version of Indy, but it is close.
Sam B
@SamBirnbaum
@rlebeau Actually I am dealing Delphi, but I have the product that has C++ as well. I placed the download software in the folder c:\Indy10 so I will search the entire C drive and see if it placed it somewhere. BTW, there is a Group project for 190, what is that for ?
Sam B
@SamBirnbaum
Found it. I guess I should have put the downloaded software in a folder under rad studio. Will have to redo it after I come back from the airport.
Thanks again. Sorry for bothering you.
Remy Lebeau
@rlebeau
@SamBirnbaum Indy doesn't need to be put under RAD Studio's folder (I don't do that). As for the Project Group, that allows you to compile and install all 5 Indy packages at one time instead of individually.
Sam B
@SamBirnbaum
@rlebeau Hi, still receiving the same error 502 bad gateway. I remove all the dcu's that I thought might be needed to be regenerated and I still get the same error. Is it possible the XE 5 is the problem ?
Remy Lebeau
@rlebeau
@SamBirnbaum I don't see how, since this is an HTTP issue, not a Delphi issue
Sam B
@SamBirnbaum
@rlebeau I agree with that statement but we know that your exe worked. What other dcu's should be removed ? and from where ?
I am assuming that all the required *.pas files are in the download file indy10_5396.zip
Remy Lebeau
@rlebeau
@SamBirnbaum yes
@SamBirnbaum did you check to make sure your updated app is now sending a different HTTP request and not the old one?
Sam B
@SamBirnbaum
@rlebeau That is weird. The accept-encoding still has identity in it.
Also I am getting an error about loading dclIPIndyIpll190.bpl - Not a valid win32 application
Remy Lebeau
@rlebeau
@SamBirnbaum then you are not using the newer Indy version, your app is still compiling against the old version
Sam B
@SamBirnbaum
@rlebeau I removed all the dcu's and replaced them with the ones that were downloaded.
@rlebeau All the old DCUs were moved to sub directories.
Remy Lebeau
@rlebeau
@SamBirnbaum what about the old PAS and BPI/BPL files?
Sam B
@SamBirnbaum
II can trap the traffic to the location where the header is being built. Will let you know.
The old pas files and the bpl files. Did not know about the BPI files. What are they ?
Remy Lebeau
@rlebeau
@SamBirnbaum link libs for the BPLs
Sam B
@SamBirnbaum
@rlebeau The pas files are all new (dated 3/1/2017) let check on the bpi files
@rlebeau Found thenew BPI files will make sure they are the ones that I am using. What about cdlIPIndyImpl190.bpl ?
Remy Lebeau
@rlebeau
@SamBirnbaum dcl BPLs are design-time packages. IPIndyImpl is not an Indy package, it is an Embarcadero package that uses Indy internally for things like DataSnap and such.
Sam B
@SamBirnbaum

@rlebeau Oh. These were the original bpls that I had:
IndyCore190.bpl
IndyIPClient190.bpl
IndyIPCommon190.bpl
IndyIPServer190.bpl
IndyProtocols190.bpl
IndySystem190.bpl

These were date 12/7/2013

However, after I compiled the 5 DPK files I only had
IndyCore190.bpl
IndyProtocols190.bpl
IndySystem190.bpl

These 3 replaced the 5 above as I removed the 5 above.

Remy Lebeau
@rlebeau
@SamBirnbaum The only packages that belong to Indy are IndySystem, (dcl)IndyCore, and (dcl)IndyProtocols, the rest are Embarcadero's.
Sam B
@SamBirnbaum
@rlebeau Ok. I will move them back into that directory. HAve to find again where the header is being prepared.
@rlebeau The .pas file are all new. idHTTP.pas was created on 12/15/2016 , IdHTTPHeaderInfo.pas was created 12/28/2015. does that sound right ?
@rlebeau Need to get a bite to eat. Can't think straight anymore.
Sam B
@SamBirnbaum
@rlebeau Will be back shortly
Sam B
@SamBirnbaum
@rlebeau ITS ALIVE :) :) :) Can't thank you enough.
@rlebeau Knocking off for the night. I really need a drink after this. Will cleanup environment tomorrow.
Jeroen Wiert Pluimers
@jpluimers
What would be a good defense mechanism on a server against HTTP clients keeping the connection open indefinitely with sending very little traffic?
mezen
@mezen
Do the clients are sending valid HTTP traffic?
Jeroen Wiert Pluimers
@jpluimers
Not always. Basically it's part of my previous questions on throttling. Basically this is to harden a server against wrong traffic and high loads of traffic (not even DoS or DDoS though I'm interested in preventing that as well.).
Matthijs ter Woord
@mterwoord
hmm, disable http keep alive? ie, revert back to http 1.0?
Jeroen Wiert Pluimers
@jpluimers
Some clients do not support http 1.0 and require keep alive; but they do keep communicating and never keep alive for more than like 60 seconds.
Remy Lebeau
@rlebeau
Even if a client only supports HTTP 1.1+, the server always has final say in keep-alive handling. You could just set TIdHTTPServer.KeepAlive=False, that will work just fine for HTTP 1.1 clients. On the other hand, TIdHTTP and TIdHTTPServer currently support the 'Connection: keep-alive' header to keep a connection open, but they do not yet implement the 'Keep-Alive: <timeout>' header to timeout and close an open connection between requests. In TIdHTTPServer, at least, when KeepAlive=True, you could try setting the AContext.Connection.IOHandler.ReadTimeout property in the OnConnect event and let Indy raise an exception and close the connection if the client does not send any traffic within the timeout period. That won't really address DoS attacks, though.
Jeroen Wiert Pluimers
@jpluimers
I'll try the last suggestion.
We need KeepAlive=True because some of the HTTP clients expect that.
Remy Lebeau
@rlebeau
@jpluimers That is highly doubtful. All compliant clients are expected to support the 'Connection: close' header. The HTTP spec makes it clear that just because 'Connection: keep-alive' is the default behavior for an HTTP 1.1 request does not guarantee that all servers will use 'Connection: keep-alive' on their responses. HTTP keep-alives are always negotiated, never assumed or guaranteed (client asks for a keep-alive, the server responds yay or nay). And besides, if the server closes its end of the connection after sending a response, clients have no choice but to close their ends as well. Any TCP socket implement has to deal with the possibility of closed/lost connections and reconnects. HTTP is stateless, there is no guarantee that a connection will stay alive from one request to the next, so any HTTP client has to be prepared to reconnect on each new request if necessary
Sergey
@icegood
Hi there!
I have a question regarding latest build of Indy Sockets for VCL:
In IdIOHandler in all versions of Read/Write for integers we have parameter AConvert: Boolean = True . I wonder in which cases it is useful to have AConvert= False? If we are interest in reliable tcp/ip protocol we have to run pairs of HostToNetwork and NetworkToHost calls. I mean we shouldn't do any assumptions about endianness of both client and server.
Sergey
@icegood
I also converting one project fro indy9 to indy10. And i wonder, whether should i create new component ioHandler (i beleive TIdIOHandlerStack) for old TIdFTP component? Or Indy does it for me?