So I don’t think that formula works well but again is all depending on a lot of variables
When I started Looping 2 months ago I knew all my ratios (including ISF) were off, so I used 1800 rule as a starting point. But then, for two months I’ve been testing, testing, testing and got to the conclusion that my ISF varies throughout the day (being less sensitive for first few hours in the morning, presumingly when hormons kick in after wake up). If I consider my average TDD from last week of 45, my ISF would be 40 but my current ISF settings vary from 42 in the morning to 53 at night (averaging at 49) - and I think they are still too low, just that ISF testing is so hard…
Thanks for sharing. I am testing everything from the beginning as I am noticing all my settings are probably off coming from non looping.
I wonder if anyone else is seeing the same double-counting of IOB right after a meal bolus that I've been seeing lately: #845
Jim is CrushingT1D
I’ve been having problems with dev last couple of weeks. in general everything is really slow about 25% of the time. Switch to the app and takes 30 seconds to do anything (sometimes blank screen, sometimes out of date screen, sometimes graphs UI all screwy). Also when i enter carbs about 25% of the time it takes upwards of 1 minute to show up in the display and sometimes does not fire up the bolus window until 30 seconds later.
anyone else having issues? not sure if it is dev related or healthkit related
(iPhone X iOS 12.1
@CrushingT1D_twitter I haven’t seen that. A while back, before iOS 12, I had big lag problems, but haven’t lately.
@elnjensen I’ve seen the same IOB double-counting. Caught a glimpse of it tonight but forgot to capture an issue report.
Moved from loop 1.5 to 1.9.3 last night. Stuck on gray loop. Bgs not coming through. I've tried the troubleshooting steps in the loop docs several times with no change. I tried rebuilding from scratch this morning and still no green loop. Any thoughts?
@xrinaudo have you added the share credentials and BGs still aren’t coming though, even from the cloud? And how long has it been gray?
Yes share credentials are in. Verified against bridge credentials in nights out. Still no bgs. Gray since the switch last night around 8pm.
@elnjensen@mpangburn Yes, if you see that, an issue report could really help.
Would it help if i posted an issue report? I'm almost certain it's something silly that a second pair of eyes will probably catch.
Jeremy M Lucas (GetRileyLink.org)
@xrinaudo you can also test the rest of loop setup by adding a BG in HealthKit directly. I would also verify your G5/6 Transmitter ID.
@xrinaudo did you delete your old app? Have you rebooted phone?
I deleted the old app. Haven't rebooted the phone. Will try that now.
Fixed it. I forgot to enable healthkit access on the new loop app. Thank you all. This community is great.
@ps2 I linked to two issue reports in #845. Let me know if you need more info, e.g. if more would help if I see it again.
Jim is CrushingT1D
Does the issue report link in Loop contain crash reports? Or what is the best way to log crashes with Loop? I’ve typically included crashlytics etc. Loop has been crashing quite a lot for me so would like to sort out where and submit an issue or help fix it
thanks. yea, this must be the manual way to do it.
maybe amplitude can do it
@rsilvers129 definitely going to download that version. I am still using your Siri shortcut and love it.
@/all To better support searching and organizing discussions around Loop and RileyLink, the Gitter channels for these will be moving to Zulip. In addition to great thread support, Zulip allows attaching images from mobile clients, full markdown support, open registration, search, and free hosting for open source projects. https://loop.zulipchat.com
Jim is CrushingT1D
not going to miss it
ok yay zulip
@joeyovens I suggest grabbing my latest FPU-IRC. I just updated it.
@rsilvers129 I downloaded it earlier, today, did you JUST JUST update it?
can someone help me with correction range? I am assuming I would just set mine to something like 90-110
correction range is just the upper and lover limits for correction correct?
thank you and also thank you for the post you put on facebook about how to get loop working properly with spike. I removed the extra s from https today and everything seems to be working very well ... Thanks again
going camping Friday - Sunday so I need offline mode
also flying in a week will need it there also
Hi all. I'm trying to reinstall my app and keep getting this message:" A valid provisioning profile for this executable was not found." It appears after the "Build succeed" message. Could somebody please help me? Thank you
@micheliseferian this chat has been move to zulip :)
@dabear thank you
Chad A. Harper
Hey guys! when ive been trying to build —> it seems to be getting stuck 2)Building Loop: Cartfile | Building 16 of 256 tasks. ( is this normal? …should i just keep waiting ??) ---
Weird: changed “Project Format” to X-Code 10.0 compatible, and it started making progress….
Anyone have issues with the riley link battery getting really hot? I was sitting today and my riley link was burning my leg and i took it out and took it apart but not sure if it will happen again? Any ideas?