by

Where communities thrive


  • Join over 1.5M+ people
  • Join over 100K+ communities
  • Free without limits
  • Create your own community
People
Activity
    Dan Shoubridge
    @danshoubs
    @xaviermignot that was a compile error, rather than a log whilst it was running, but I am logging in the way you suggest to help me, e.g. LogInfo("Message recieved from IoTHub");
    I managed to get the following working now, but thanks anyway:
    ...
    JSON_Value *root_value=NULL;
        root_value = json_parse_string((const char*)payload);
        JSON_Object *root_object;
        if(json_value_get_type(root_value) == JSONObject)
        {
            root_object = json_value_get_object(root_value);
            const char *message = json_object_get_string(root_object, "message");
    ...
    Sam Listopad
    @samlii
    Hmm does anyone know about the free MXChip DevKit, I got an email about one but only see links to purchase from Seeed
    rbeyea
    @rbeyea
    @samlii same here. got an email that says "Sign up for a free IoT MxChip DevKit and start simplifying your processes." but I see no where to sign up. Just the link to purchase a kit.
    Liya Du
    @liydu
    @samlii , @rbeyea , can we know the details about that email? As our team has not sent such email recently, we want to learn more about the situation here. Thanks.
    ashtez
    @ashtez
    Hello everybody, how are you doing ?
    Do you know why this sketch https://github.com/microsoft/vscode-iot-workbench/blob/master/docs/iot-devkit/devkit-mqtt-client.md gives me gibberish instead of a properly formated string ? For exemple : "ΓΌs 5m m m m m m m J"
    ashtez
    @ashtez
    ok, problem resolved, the default code is garbage, use this one : https://github.com/eclipse/paho.mqtt.embedded-c/blob/master/MQTTClient/samples/arduino/Hello/Hello.ino
    &ladeak
    @ladeak87_twitter
    When I connect the devkit to a
    When I connect the devkit to a battery bank, the programming led starts blinking. What does that mean?
    Renhe Li
    @lirenhe
    @ladeak87_twitter , The programming led blinks when uploading firmware into devkit. Did this happen when you connect it to your computer?
    @ashtez , I checked the devkit-mqtt-client and did not see any strange string. Could you share the full output? The Baud Rate should be set to 115200.
    &ladeak
    @ladeak87_twitter
    It blinks much slower say 1/sec
    Nik - Shahriar Nikkhah
    @SQLDataSide
    anyone have worked on Azure Speaker Recognition?, i need help for a demo
    Renhe Li
    @lirenhe
    @ladeak87_twitter could you try to upgrade our firmware first? https://microsoft.github.io/azure-iot-developer-kit/docs/firmware-upgrading/ If that doesn't help, this could be a hardware issue and please contact the seller.
    Nik - Shahriar Nikkhah
    @SQLDataSide
    Anyone knows how to work with Azure Speaker Services? I need some Demos and i cant get the one provided my MS working.
    raghuureddy
    @raghuureddy
    Hello, I have followed the iot getting started and after following all the steps, getting the below errors, please suggest..
    2019-06-13 20:15:43 INFO: >>>Connection status: disconnected
    2019-06-13 20:15:43 ERROR: socketio_mbed_os5.c (ln 176): Socketio_Failure: underlying IO error -3004.
    2019-06-13 20:15:43 INFO: >>>Connection status: disconnected
    2019-06-13 20:15:48 INFO: >>>Re-connect.
    2019-06-13 20:15:48 INFO: Iothub Version: 1.2.14
    2019-06-13 20:15:43 INFO: >>>Connection status: disconnected 2019-06-13 20:15:43 ERROR: socketio_mbed_os5.c (ln 176): Socketio_Failure: underlying IO error -3004. 2019-06-13 20:15:43 INFO: >>>Connection status: disconnected 2019-06-13 20:15:48 INFO: >>>Re-connect. 2019-06-13 20:15:48 INFO: Iothub Version: 1.2.14
    sandy
    @sandeepkumar-sgnr
    Hello, is it possible to use ESP32 Web-socket server library into IOT-Dev-Kit ? if not , then anyone having idea how can we create web-socket server library for IOT Dev Kit ?
    mkbouvet
    @mkbouvet
    How can I get PlatformIO to cooperate with IoT projects? When I try to debug the "DevKitTranslator" example project it breaks completely
    Renhe Li
    @lirenhe
    @raghuureddy , from the error message, it seems the network is not stable that caused connection failure. Could you try another network?
    Renhe Li
    @lirenhe
    @sandeepkumar-sgnr , on IoT Devkit, we only have web socket client. https://microsoft.github.io/azure-iot-developer-kit/docs/apis/websocket-client/ . I am not sure whether existing server lib would work.
    @mkbouvet , you could directly use the debug feature provided by Vscode Arduino Extension. As I know, debug code on IoT Devkit is supported.
    sandy
    @sandeepkumar-sgnr
    @lirenhe Thanks for the reply, i have tried the existing server lib but it was not working.
    Allan Pead
    @apead
    Hi
    anyone able to create an iot central application lately?
    Renhe Li
    @lirenhe
    @apead , could you provide more detail about the problem you face?
    Allan Pead
    @apead
    @lirenhe I sorted it out : combination of website not working properly and subscription without the iotcentral provider registered
    Matha Goram
    @baqwas
    Hello, I had to rebuild my Ubuntu platform and reinstall VS Code. Arduino Board Manager no longer offers AZ3166 as a selection but when I plug in the board the status bar detects it and the STMicroelectronics driver is installed. Is there a manual method that can be applied to let Board Manager offer AZ3166 as a selection. UNO and MKR1000 work fine with "Hello Blink" tests. What have I not installed? The AZ3166 connects to IoT Hub presently when plugged in but I would like to conduct local Arduino tests. Thanks.
    Error: AZ3166: Unknown package
    [Error] Exit with code=3
    Matha Goram
    @baqwas
    @lirenhe Sorry to bug you but could you please steer me in the right direction to use the AZ3166 for local Arduino examples that were installed when I did the original IoT DevKit installation. The "config" files were installed before my fresh install of Ubuntu but were "restored" automatically by "duplicity Backup" app after the fresh install. Now the AZ3166 board is "undefined" in VS Code: Arduino: Board Manager (not in the selection list) but Azure IoT Hub has registration info and data flows freely to Azure services. How can I get Arduino Board Manager to "recognize" the AZ3166? I guess the answer is a complete fresh install of AZ3166? Which steps do I need to follow? Thanks again.
    raghuureddy
    @raghuureddy
    @lirenhe thank you, my work wifi was blocking calls to IoT hub i guess, after switching to diff wifi, its working.
    Renhe Li
    @lirenhe
    @raghuureddy , there is a 'Configure VS Code with Arduino settings.' in https://docs.microsoft.com/en-us/azure/iot-hub/iot-hub-arduino-iot-devkit-az3166-get-started, could you try it again? You also need to click 'Refresh Package Indexes' to force Arduino to load the new package.
    rajkamalrhub
    @rajkamalrhub
    Hi, We are developing iot gateway to send data from device to cloud. wanted to sent application log and audit log details into the cloud. also log to be viewed in log analytics in azure. is there any logging services availabe to send from device to cloud.
    Jared Dickson
    @kraihn

    I recently purchased an AZ3166, and after going through all of the instructions, I can't get it to show up on my Windows 10 machine. I've tried the process on 2 different computers.

    I don't see "AZ3166" as a browsable storage device, and I don't see "COM3" as an option in VS Code.

    Any ideas on what I should look into? The driver zip I downloaded was named "en.stsw-link009"

    Tammy Lee πŸŽ‘πŸ‘©πŸ»β€πŸ’»πŸŒ±
    @dev_n_farming_twitter
    Hello! I'm new, so apologies if this is a silly question. In the beginner tutorial (https://microsoft.github.io/azure-iot-developer-kit/docs/get-started/), in step 4 under "You can use Azure IoT Toolkit to monitor device-to-cloud (D2C) messages in IoT Hub", it references setting the IoT Hub Connection String under the "IOT Hub Devices" tab. I think that may have been deprecated -- I only see a tab that reads "Azure IOT Hub", under which the devices listed. When I right click on the device, I see a menu of options, but not one to set the IoT Hub Connection String.
    image.png
    (I'm currently trying to use the Azure CLI command az iot hub policy create but I'm coming across errors.) Could you advise? Thank you!!
    Tammy Lee πŸŽ‘πŸ‘©πŸ»β€πŸ’»πŸŒ±
    @dev_n_farming_twitter
    Nevermind -- found this: MicrosoftDocs/azure-docs#31878 πŸ˜†
    br1pro
    @br1pro
    Hi! I'm following this tutorial https://microsoft.github.io/azure-iot-developer-kit/docs/get-started/ to connect my AZ3166 to Iot Hub.
    The tutorial explain how to run the "Get started" tutorial.
    In the section "Build your first project" I'm blocked at point 5. If I click on the "select serial port" button in the right down corner, nothing happens.
    I'm using the last firmware 1.6.2 and visual studio code on a win10 pc.
    image.png
    Renhe Li
    @lirenhe
    @kraihn , could you try to use another cable to connect to AZ3166?
    @dev_n_farming_twitter , Thanks for raise this issue, we will update our documents for this command change.
    Renhe Li
    @lirenhe
    @br1pro, no sure whether this issue is caused by the latest version of VS Code. Could you try again with VS code 1.35?
    br1pro
    @br1pro
    Hi All, related to my issue I found this Issue open for vscode-arduino
    microsoft/vscode-arduino#816
    rajkamalrhub
    @rajkamalrhub
    Hi, I'm new to azure, using Iot gateway devices which connect to iot Hub for collecting messages. Wanted to collect application log and audit log from the device, I was reading azure log analytics and application insights, which one would be a good choice for the opertaion to know how device perform, troubleshooting and analysis.
    James Francisco
    @JamesFrancisco
    I've been trying to configure an AZ3166 board. I've created the IoT hub and device file on Azure. The connection string was automatically generated. But, when I try to configure the board through VSCode using the automated upload, I keep getting this error. "Configure Device connection string completely."
    Arthur Ma
    @ArthurMa1978
    @rajkamalrhub for iot device Distributed tracing is the right choice
    @JamesFrancisco what is 'automated upload'? and the message "Configure Device connection string completely." is not error but notification for successfully setting the connection string to AZ3166 board. For more information please check Quickstart and Build your first project