arduino-halsupport as well in the meantime
Cargo.tomlto e72faada6bb7f67990216525aeb2132bbb3d53e9, you should be able to use it just like you'd do for the Arduino Nano (with ATmega328P)
[dependencies.arduino-uno] git = "https://github.com/Rahix/avr-hal" features=["arduino-nano"]
rev = "e72faada6bb7f67990216525aeb2132bbb3d53e9"and change the features to
features = ["nano168"]
what should work after that does not work before?
as the two chips are almost identical, most likely nothing. But to keep everything clean I'd want to have the 168 version be handled separate, ontop of its own HAL layer. This means if there ever are any differences to care for, it is easy to differentiate the two.
❯ cargo run Updating git repository `https://github.com/Rahix/avr-hal.git` error: no matching package named `arduino-uno` found location searched: https://github.com/Rahix/avr-hal.git?rev=e72faada6bb7f67990216525aeb2132bbb3d53e9 perhaps you meant: arduino-hal required by package `rust-arduino-blink v0.1.0 (/home/dietrich/Projekte/Source/rust-arduino-blink)`
avr-hal... Sorry :(
avr-halrecently... Maybe check https://github.com/Rahix/avr-hal#repository-structure to familiarize yourself with the new layout if you intend to update your own projects)
cargo generate --git https://github.com/Rahix/avr-hal-template.git --branch wipand then selecting
Nano168as the board. If I didn't mess anything up,
cargo runshould be enough with that to make your board blink (might need to set a port with
cargo run -- -P /dev/ttyFOO).
cargo run --bin test-nano168 Finished dev [optimized + debuginfo] target(s) in 0.02s Running `ravedude nano168 -cb 57600 -P /dev/ttyUSB0 target/avr-atmega168/debug/test-nano168.elf` Board Nano Clone (ATmega168) Programming target/avr-atmega168/debug/test-nano168.elf => /dev/ttyUSB0
cargo run(after I pasted the code from your example)
profile=minimalin toolchain.toml do?