So more than supporting anything new, I just wanted to make sure I did not break anything with my changeset ;)
I fail to be successfull... I added the small blink example to a git repository: https://github.com/enaut/temp-test
```
❯ cargo run
Updating git repository `https://github.com/Rahix/avr-hal.git`
error: no matching package named `arduino-uno` found
location searched: https://github.com/Rahix/avr-hal.git?rev=e72faada6bb7f67990216525aeb2132bbb3d53e9
perhaps you meant: arduino-hal
required by package `rust-arduino-blink v0.1.0 (/home/dietrich/Projekte/Source/rust-arduino-blink)`
what do I do wrong?
ooh, I totally missed that you're still using the old version of
In that case, give me another minute - I'll prepare the new project template for the board, then you can just use that to test
avr-hal... Sorry :(In that case, give me another minute - I'll prepare the new project template for the board, then you can just use that to test
(We did some rather large changes to the crate-architecture of
avr-hal recently... Maybe check https://github.com/Rahix/avr-hal#repository-structure to familiarize yourself with the new layout if you intend to update your own projects)
as that is my only proof of concept project so far no need to upgrade ;)
alright, try generating a project with
cargo generate --git https://github.com/Rahix/avr-hal-template.git --branch wip and then selecting Nano168 as the board. If I didn't mess anything up, cargo run should be enough with that to make your board blink (might need to set a port with cargo run -- -P /dev/ttyFOO).
cargo run --bin test-nano168
Finished dev [optimized + debuginfo] target(s) in 0.02s
Running `ravedude nano168 -cb 57600 -P /dev/ttyUSB0 target/avr-atmega168/debug/test-nano168.elf`
Board Nano Clone (ATmega168)
Programming target/avr-atmega168/debug/test-nano168.elf => /dev/ttyUSB0
and then nothing happens
the weired thing is my other project works now with only
cargo run (after I pasted the code from your example)
Oh I found the difference what does
profile=minimal in toolchain.toml do?
on removing that everything works as expected
it shouldn't have an influence whatsoever... here is relevant documentation: https://rust-lang.github.io/rustup/concepts/profiles.html
it just controls whether rustfmt and clippy are installed for the toolchain
especially because it should have influenced the other project exactly the same...
I searched for the difference... and the only issue was... I was still connected to the Serial port in the other window...
So the template works just fine!
alright, then I'll go ahead and get all those changes merged now
Rahix (Rahix) I have ported the blink and the adc example (the second without the temperature) see pr
*ported to the atmega168
rahix - in the pr you requested to change the comment to Nano 168 - shouldn't that be consistent with the verbose naming in the feature doc: "Nano clone (ATmega168)"?
or do you prefer the more readable variant?
honestly it does not matter much at all - I just was a bit weary about reading "Arduino" in code related to a board which is not an official one
so choose whatever you think is best, it's not important ;)
either me or my git allways gets confused... sometimes both... :) I work too much alone...
but now it should be as desired in the pr (force pushed)
what are good settings for rust-analyzer? Currently it is allways failing with the macros like
ufmt::uwriteln! so whenever I open a project or file depending on avr-hal it is complaining about so many problems.
I'm trying to add attiny support to arduino-hal and I was wondering if there's anyone who could help with some of the trickier generics/trait bounds
Although I am not quite sure, what you want to do? attinies by themselves belong into attiny-hal
So I need to figure out how to move the mega-specific stuff into
atmega-hal and make avr-hal-generic generic to allow a corresponding implementation in attiny-hal