I already have a working motion install including motion.conf (and camera conf files). motionEye seems to be ignoring my existing motion.conf (even after changing conf dir to /etc/motion where motion.conf and conf.d/camera?.conf files exist).
Can motionEye using existing motion.conf files?
Just getting started with MotionEye and am trying to add an rstp camera however I'm getting "protocol rstp not supported" when trying to add a network camera with the RSTP address.
I am running MotionEye in Docker
motionEye Version 0.42
Motion Version 4.2.2
Can anyone give me some guidance as to how I can get this working or what I need to do?
Hi a newbie question.
I've configured so that it sends a slack notification when motion detected. It will basically take the last image from the folder.
I've tried playing around with the settings currently set
Motion gap = 20 s
Captured Before = 10 frames
Captured After = 10 frames
Min motion frames = 20 frames
But what happens is that the last image is usually shot too late. Do u have any recommended setting for this scenario?
Also what is the difference between "Run A Command" vs "Run An End Command"?
i installed motion eye in a pi 3b+ with raspbian.. after completion, my usb webcam is not detected.. command ( ls -l /dev/video* ) ..result ( crw-rw----+ 1 root video 81, 3 Mar 16 19:01 /dev/video0
crw-rw----+ 1 root video 81, 4 Mar 16 19:01 /dev/video1
crw-rw----+ 1 root video 81, 0 Mar 16 19:01 /dev/video10
crw-rw----+ 1 root video 81, 1 Mar 16 19:01 /dev/video11
crw-rw----+ 1 root video 81, 2 Mar 16 19:01 /dev/video12
)..... command ( v4l2-ctl --list-devices) result ( bcm2835-codec-decode (platform:bcm2835-codec):
HD Webcam C615 (usb-3f980000.usb-1.3):
) .. please help ASAP