Where communities thrive


  • Join over 1.5M+ people
  • Join over 100K+ communities
  • Free without limits
  • Create your own community
People
Repo info
Activity
    tokenize47
    @tokenize47
    ah, but thats mpeg2
    I'm mostly interested in h264 and 265
    Marcus Klein
    @kleini
    H.264 can be decoded in HW without necessary license keys.
    tokenize47
    @tokenize47
    yeah exactly
    Marcus Klein
    @kleini
    AFAIK only RPi4 is able to decode H.265 in hardware. And I don't know, with what Pi version they added H.264 hardware decoding.
    Alberto Vargas
    @albvar
    hey guys, does Motion eye has a rest interface I can use to take snapshots?
    Alberto Vargas
    @albvar
    Disregard ,Chrome + F12, capture network activity, click snapshot button on the ui, search for snapshot gave me what I needed.
    tokenize47
    @tokenize47
    is there a way to tell motioneye to keep the source camera resolution?
    I mean so we dont have to configure a fixed resolution
    Joshua Kramer
    @JoshuaPK
    Hi all! On the main MotionEye page- the page that shows all of the cameras at once- are those camera images sent to the browser in full resolution (i.e. 1080p) and then the CSS shrinks the images? Or does the Javascript on that page request images from the MotionEye server at a different resolution than normal? The reason I ask is this. I am trying to have MotionEye do text overlays on the images. If I make the text overlays big enough to see on that main page, then when I view the cameras in full resolution, the text is jagged and ugly. I am trying to convince the Motion developers to add TrueType support to their text overlays so that this doesn't occur.
    William Beckett
    @Backslashh

    Hi there,
    Just getting started with MotionEye and am trying to add an rstp camera however I'm getting "protocol rstp not supported" when trying to add a network camera with the RSTP address.
    I am running MotionEye in Docker
    motionEye Version 0.42
    Motion Version 4.2.2

    Can anyone give me some guidance as to how I can get this working or what I need to do?

    Evgeny
    @firej
    @wjbeckett Hi. I think you should use rtsp protocol.
    Jun Huh
    @junhuhdev

    Hi a newbie question.

    I've configured so that it sends a slack notification when motion detected. It will basically take the last image from the folder.

    I've tried playing around with the settings currently set

    Motion gap = 20 s
    Captured Before = 10 frames
    Captured After = 10 frames
    Min motion frames = 20 frames

    But what happens is that the last image is usually shot too late. Do u have any recommended setting for this scenario?

    Also what is the difference between "Run A Command" vs "Run An End Command"?

    Prabin Kumar Das
    @Prabindas001

    i installed motion eye in a pi 3b+ with raspbian.. after completion, my usb webcam is not detected.. command ( ls -l /dev/video* ) ..result ( crw-rw----+ 1 root video 81, 3 Mar 16 19:01 /dev/video0
    crw-rw----+ 1 root video 81, 4 Mar 16 19:01 /dev/video1
    crw-rw----+ 1 root video 81, 0 Mar 16 19:01 /dev/video10
    crw-rw----+ 1 root video 81, 1 Mar 16 19:01 /dev/video11
    crw-rw----+ 1 root video 81, 2 Mar 16 19:01 /dev/video12
    )..... command ( v4l2-ctl --list-devices) result ( bcm2835-codec-decode (platform:bcm2835-codec):
    /dev/video10
    /dev/video11
    /dev/video12

    HD Webcam C615 (usb-3f980000.usb-1.3):
    /dev/video0
    /dev/video1
    ) .. please help ASAP

    Kivanc-IOT
    @Kivanc-IOT
    hello guys I have a problem can you pls help me
    i have motioneye on ubuntu 18.04 on jetson nano
    i go to my motioneye ip and setup everything , i can see the video coming from my camera
    but when i try to see the stream from another pc ( same network) i can't see it
    can you help me pls ?
    Prabin Kumar Das
    @Prabindas001
    what's showing on the browser ?
    Kivanc-IOT
    @Kivanc-IOT
    nothing , when I try to connect from another computer it seems like tries to load , it is like when you click refresh and it goes infenitely
    and a note , I don't know it is important or not jetson nano has no wifi it connects wired
    JesseWebDotCom
    @JesseWebDotCom
    New to MotionEye (Ubuntu, Foscam C1 cameras) - how can I get audio recorded? Video looks great, but no audio. Device feed: rtsp://ip_address:554/videoMain - Thanks
    Prabin Kumar Das
    @Prabindas001
    @Kivanc-IOT as per my knowledge the motioneye transfers the video stream through the local network of a router.. It needs to connected to a wifi...
    @JesseWebDotCom as far as I know there is no feature of audio recording... And also pi dont have a mix..
    Mic*
    vasureddy619
    @vasureddy619
    My hik vision camera has audio in and out feature is there any feasibility I can record audio also in motioneye.
    @Kivanc-IOT check the streaming port of your camera and try with vlc media player application
    vasureddy619
    @vasureddy619
    @ccrisan are monitor feature and action button features available for motion eye version 0.42 in motion version 4.2.2 os version Ubuntu 18.10 for open media vault 5.0
    I am using it via docker
    Using motion eye:dev-amd64
    I am completely new can u please help me out for my him vision ptz cameras whatever I am trying I am unable add those features
    vasureddy619
    @vasureddy619
    Can anyone please help me out
    Kivanc-IOT
    @Kivanc-IOT
    @Prabindas001 it is connected via cable so is not valid ?
    vasureddy619
    @vasureddy619
    @Kivanc-IOT what about my issue is there any solution
    Brockway
    @Brockway
    I'd love to monitor my rpi motioneye cameras with nagios through SNMP, still no on building snmp into the default distro so i don't have to rebuild them all on Raspbian?
    jpi1968
    @jpi1968
    Hi, I am new on Github. Newbie question : did someone actually managed to have the same cam provide motion detection with Motion Eye AND stream on the net. I get either fluid integration and stream on lovelace Home Assistant (EspHome integration) or motion detection, but no fluid streaming through Lovelace? I have been struggling on this for several days and would like know if it is even possible? Thanks for your help...
    IVData
    @IVData
    Hey guys I just ran the migrateconf script on my config files and now when I restart motioneye (docker) all of my cams are gone. Nothin in the logs.. Any ides?
    Nothing is written to the log specified in motioneye.conf, even when logging level is debug.
    IVData
    @IVData
    NVM. The issue was that I was using an old docker tag so it was an old version of motioneye
    Alexandre Almeida
    @amfalmeida
    Hi, does anyone use RPI4 with MotionEye to do a downstream of an IP Camera? I have a rpi3 with the same setup and the stream was fast but with a rpi4 the stream has a 10/20 s lag. Does anyone have the same problem?
    Elnino1981
    @Elnino1981
    Hi to everyone, I am looking for a solution, how to take a picture with using external hardware button connected to some GPIO pin. Is this please possible?
    Elnino1981
    @Elnino1981
    Probably stupid question, it will be possible, the right question should be, how to do it?
    miraclecontrols
    @miraclecontrols
    This message was deleted
    miraclecontrols
    @miraclecontrols
    Do not see feature of GPIO input available on Motiioneye but alternatively you can use Nodered platform if you are familiar with. Trigger Push Button over GPIO and use nodered-contrib-camerapi node to take a picture and store in the /home/pi/Pictures directory. However you can use MMAL feature only on one condition, either Motioneye or Nodered application to use camera, cannot use both simultaneously.
    Jakob Sultan Ericsson
    @jakeri
    Quick question. Is it possible to build a direct link to a captured image?
    I trigger some scripts and get the image path (/var/lib/motioneye/Camera1/2020-05-28/09-08-25.jpg) but I would like to create a nice clickable link in my mail.
    Merlijn Vermeer
    @Merlijnv
    Hey Is there someone here that can help me I am setting up my motioneye camera system I am using a raspberry pi zero w set to fast network camera and I have an hub where this camera is added but I cant seem to let it save to my nfs share... somebody that could help me? I only get custom path in storage options
    Tomás Rojas Castiglione
    @tomas.rojas.c_gitlab
    Hi I'm havin issues and I dk if it is woth opening an issue on the repo so I'll ask here first. Here is the thing: I am usung the latest motioneyeos and when I reboot, I cannot enter via the web UI. Apparently it is not conected to the wifi anymore
    Brian McGonagill
    @bmcgonag_gitlab
    Good day. I want to run MotionEye as a hub only with no camera physically attached. Is that possible? I have tried a few times, and the Pi I'm running it on won't boot without a camera attached. Thanks for any help.
    Brad B
    @bbanerd
    Question for group: Running motioneye on a zero which I know from two tests is unable to automatically update; it will hang after auto update attempt reponding to pings but nothing else until power cycled. It will however run after power cycle and I can SSH in. It does not run cleanly though; for example some of the streaming config options are missing, and it can reboot. Any suggestions as to where to look in which log files for clues as to the problem with auto update?