Where communities thrive


  • Join over 1.5M+ people
  • Join over 100K+ communities
  • Free without limits
  • Create your own community
People
Repo info
Activity
Andrew Tridgell
@tridge
I could help you with the samba setup if you like
Randy Mackay
@rmackay9
ok, tridge, i'll take you up on that!
Bill Bonney
@billbonney
This message was deleted
adeptastic
@adeptastic
what kinda wifi dongle? curious because I am probably going to order an odroid... and your request is pretty reasonable, it should not take a lot of work
Víctor Mayoral Vilches
@vmayoral
@proficnc https://mega.co.nz/#!aQ8FnB4B!CpqMmZdVyOWvryxdb9Hzvo2UnL44L-0JttPRswgC6Ek, should still be active but it does not include the latest changes in master so you should clone APM and compile it.
I plan to create a new image as soon as I finish debugging the Power Module support for the PXF (we are getting some weird voltages).
adeptastic
@adeptastic
@rmackay9 procedure for wireless access point setup on odroid (half of what you're trying to get). http://forum.odroid.com/viewtopic.php?f=52&t=6282 After that I would usually use rsync/ssh2 to copy files but the samba approach is definitely more user friendly for most people. and I am really impressed that tridge offered to help you set samba up, I would also be willing if he is busy at the time.
Víctor Mayoral Vilches
@vmayoral
@ahcorde is also working on providing support for the LSM9D and I'd also like to test the UBleds work @anujdeshpande did. Shouldn't take long
adeptastic
@adeptastic
@vmayoral is it possible to include some details on what you are expecting for test results on the youtube vids? It is hard to tell if it is just R/C free flying or fighting a lot of wind or what in some of the videos. And I missed your message earlier (before odroid mention), which is the reason I'm just looking now
like a mission planner picture in picture or something? Sorry, the production value of some of those RC hobby guys is actually REALLY high and you get spoiled, I would love to be doing my own testing in reality
Víctor Mayoral Vilches
@vmayoral
@adeptastic sure we should add a good descriptions. Thanks for that! (so much to improve :( ), regarding the dongle, we are using the Edimax EW-7811UTC with the BBB
i presume it should work as well with the ODroid since i compiled myself the kernel modules.
adeptastic
@adeptastic
good information!!! thank you
Víctor Mayoral Vilches
@vmayoral
I quite like this dongle because it can be purchased with different antenas
and it supports 802.11 ac. We are actually using the 5 GHz band. Quite useful when using RC controllers :)
adeptastic
@adeptastic
I think maybe more than description, also showing some kinda control interface, whether its mission planner, qgroundcontrol, or even command line would be helpful to understand how you're interacting or monitoring the missions
heh yeah I find myself considering ezUHF 433mhz RC control just to free 2.4GHz for directional amplified video links
Víctor Mayoral Vilches
@vmayoral
@proficnc I've been looking into the capacitors of the PXF design and i found that some of them have 0.1% tolerances. I've gone through the datasheet of the components they are attached to and i couldn't find a reason to use such low tolerance capacitors. Is there another reason behind it or did i miss something?
Philip
@proficnc
There are a couple that are needed, but not many, I think we need to do an overall review before the next build. I am doing a 1.6 at the moment, and will be reviewing everything. But as far as I can tell, all is functional now.
anything to do with the IMU CP should be, and also reg out on the IMUs
Philip
@proficnc
I was thinking about putting the first UBLed in the string on the board, as I have removed the Toshiba... Toughts? Also, do we need both the crypto and eeprom? We have FRAM.... And EMMC and SD card.... If we actually setup the OTP on the crypto so we can form a COA for bug and board tracking, I would like that, but let's keep the method public and simple, just the keys to be private....
Víctor Mayoral Vilches
@vmayoral
The current three LEDs in the PXF are good enough for notifications when arming and so on. I doubt that an RGB LED in the autopilot would make a big difference when flying. I'd prefer the UBled configuration that the Iris+ has with a LED at the bottom on each leg.
The Crypto EEPROM has proved to be useful and quite easy to interface. I agree about the bug and board tracking. We should schedule a call to decide on these matters
Philip
@proficnc
Sounds good!
Georgii Staroselskii
@staroselskii
Hello, guys! Has anyone already used the new feature in LinuxSPIDriver that handles chip selecting in the kernel?
Víctor Mayoral Vilches
@vmayoral
@proficnc could you confirm that I2C is working in the board that we sent (v1.4)?
Philip
@proficnc
I havnt tested it yet, but will do
Víctor Mayoral Vilches
@vmayoral
thanks
Víctor Mayoral Vilches
@vmayoral
@proficnc, @imuguruza created v1.6 that includes an extension in some footprints (we've had issues with bad SMD mounting on some ICs). Might be useful to include it upstream.
Philip
@proficnc
Careful with that, there are many cases where extending footprints can actually make it worse... Which footprints?
Iñigo Muguruza
@imuguruza
U303
looks the layout is not enough to mount the IC properly
also LSM9D and MPU9250
Víctor Mayoral Vilches
@vmayoral
@proficnc I'd like to set up up a call to discuss the authentication and board verification matters. Do you think it can happen next week?
Philip
@proficnc
Sounds good, if we can align this with the current Pixhawk COA methods, that would be great!. Ping me on Monday :)
Víctor Mayoral Vilches
@vmayoral
@proficnc will do!
Andrew Tridgell
@tridge
Siddharth Bharat Purohit
@bugobliterator
Great talk tridge!! :smile:
adeptastic
@adeptastic
That is definitely a great talk! How is the quad core odroid working?
Andrew Tridgell
@tridge
@adeptastic I haven't received the Odroid-C1 yet - I got a shipping notice, so should be here soon
Philip
@proficnc
That talk was great! great job Tridge!
Víctor Mayoral Vilches
@vmayoral
superb @tridge!
Andrew Tridgell
@tridge
@vmayoral I was showing some people at LCA the Erle Robotics site, and I couldn't find a howto page on how to take a BBB and get all the needed bits installed on it. Is there a page I missed?
Víctor Mayoral Vilches
@vmayoral
@tridge it is explained in our gitbooks
Andrew Tridgell
@tridge
@vmayoral ok, maybe a more obvious link would be helpful then?
Víctor Mayoral Vilches
@vmayoral
You can access them in the "Learn" section. I'd be happy to put it somewhere more obvious. A link should do it for now, sure
Thanks for letting me know. Will do it tomorrow morning first thing
Víctor Mayoral Vilches
@vmayoral
Captura de pantalla 2015-01-20 a las 9.33.33.png
@tridge just added a section under "Learn", that's the process we are using and it link to our images that flash the eMMC automatically
there's also a manual process described in a subsection. We keep putting time into the docs so feel free to add any comments and we will address them as soon as we can