Where communities thrive


  • Join over 1.5M+ people
  • Join over 100K+ communities
  • Free without limits
  • Create your own community
People
Repo info
Activity
  • May 12 16:06
    wenbozzz commented #567
  • May 12 09:58
    DJI-Jerry commented #772
  • May 12 09:16
    DJI-Colin opened #772
  • May 11 05:46
    JieQ1996 commented #567
  • May 11 02:03
    dji-dev commented #766
  • May 11 01:54
    dji-dev commented #771
  • May 11 01:51
    dji-dev commented #764
  • May 11 01:36
    akamilkhan commented #771
  • May 10 14:28
    wang-zi-tao commented #766
  • May 10 10:19
    lorenzave commented #771
  • May 10 10:16
    lorenzave commented #764
  • May 10 10:03
    dji-dev commented #764
  • May 10 04:24
    dji-dev commented #771
  • May 09 15:59
    akamilkhan opened #771
  • May 08 14:12
    Hepan02 commented #770
  • May 08 10:36
    Hepan02 closed #770
  • May 08 10:36
    Hepan02 commented #770
  • May 08 10:34
    Hepan02 commented #770
  • May 08 01:41
    dji-dev commented #770
  • May 07 17:39
    Hepan02 commented #770
alejodosr
@alejodosr
Hi all, has anyone tested M210 RTK V2 and OSDK 3.8/3.8.1 and successfully retrieve camera images from X4S? In ubuntu 16.04 I am getting this error:
STATUS/1
STATUS/1
STATUS/1
STATUS/1 @ keep_camera_x5s_state, L44:
ERRORLOG/1 @ sendData, L189:
ShahAkibSarwar
@ShahAkibSarwar

Hi all, I am very new to DJI OSDK. I am currently working on a project, where I need to give the GPS coordinates of a certain location to my Matrice 100. I tried using the Waypoints Mission, but if I set the variable 'wayptPolygonSides' to 1, and then set the desired the GPS coordinates in the iterative algorithm for generating the waypoint, I get this:

STATUS/1 @ getErrorCodeMessage, L656: runWaypointMission
STATUS/1 @ getCMDSetMissionMSG, L883: MISSION_OBTAIN_CONTROL_REQUIRED

STATUS/1 @ printInfo, L204: Mission Manager status:

STATUS/1 @ printInfo, L205: There are 1 waypt missions and 0 hotpoint missions
Initializing Waypoint Mission..
Waypoint created at (LLA): 0.534897 -1.680698 10.000000
Creating Waypoints..
Waypoint created at (LLA): 0.534897 -1.680698 10.000000

STATUS/1 @ getErrorCodeMessage, L656: uploadWaypoints
STATUS/1 @ getCMDSetMissionMSG, L883: WAYPOINT_MISSION_DATA_NOT_ENOUGH
Waypoint created at (LLA): 0.534900 -1.681000 15.000000

STATUS/1 @ getErrorCodeMessage, L656: uploadWaypoints
STATUS/1 @ getCMDSetMissionMSG, L883: WAYPOINT_MISSION_DATA_NOT_ENOUGH
Waypoint created at (LLA): 0.534897 -1.680698 10.000000

STATUS/1 @ getErrorCodeMessage, L656: uploadWaypoints
STATUS/1 @ getCMDSetMissionMSG, L883: WAYPOINT_MISSION_DATA_NOT_ENOUGH
Uploading Waypoints..

STATUS/1 @ getErrorCodeMessage, L656: runWaypointMission
STATUS/1 @ getCMDSetMissionMSG, L883: MISSION_OBTAIN_CONTROL_REQUIRED

If anyone anyone has experience with such a project, I'll be grateful if you could direct me towards the right path.

Hitesh Sagar
@Hitesh-Sagar
Hey everyone!.
I am very new to DJI Onboard SDK and wanted to create awesome apps. But couldn't find resources
kindly help me.
I am trying to build an application using STM32 but couldn't get much
resources or I should say zero resources
Hitesh Sagar
@Hitesh-Sagar
@dji-dev
Hitesh Sagar
@Hitesh-Sagar
@chooolll could you please help me in getting started with Onboard SDK development with STM32
MatM210
@MatM210
Hello DJI team and user community, can anybody tell me how I can collect the timestamp info from the RTK module or Drone clock for use in my program? I'm currently using DJI::OSDK::Telemetry::RTK Struct (TOPIC_RTK_POSITION etc.) to collect latitude, longitude, and HFSL data. I need to have the drone's own timestamp alongside the above information (not the GPSinfo timestamp in time_ms and time_ns which I already have) to be saved in my program. Can somebody please help? Thanks in advance.
Elite yang
@roseyangyu
which may bind externally can not be used when making a shared object; recompile with -fPIC
when i make that,I get that error,How do I solve that
Hitesh Sagar
@Hitesh-Sagar
Hi Everyone,
I was building linux sample of Onboard SDK and getting error "Port did not send" however the serial started successfully
Hitesh Sagar
@Hitesh-Sagar
@pavankumarbn
Kindly help
Asish Mehta
@ashibhuvan
anyone have any success using viritualRC?
JongWoon Lee
@sharkvary
Onboard-SDK not supported with DJI N3-AG FC board?
Asish Mehta
@ashibhuvan
im using matrice 100
Asish Mehta
@ashibhuvan
anyone ever use virtualRC before, anyone know if it is still supported on matrice 100
the matrice 100 is an enterprise drone yet the support and codebase from dji is super terrible
the whole point of enterprise products is the support
JasonKSchreiber
@JasonKSchreiber
There is not much REAL support in this channel, just all of us asking for help, but no one able to actually help. I’m betting there are no dji devs on here, just users struggling with the intricacies of the DJI SDK!!
Asish Mehta
@ashibhuvan
Yes, there is no real support here but you get decent support on github.
jason what do you need help with? @JasonKSchreiber
Hitesh Sagar
@Hitesh-Sagar
@JasonKSchreiber I agree. No one help here. Even experienced developers do noy reply, even you direct message them
xhr1117
@xhr1117
请问onboard SDK是一个应用程序吗,如何下载
inconceivable7
@inconceivable7
Hi,
How can i enable Digital zoom of XT2 using STM32 with A3 OSDK. I have looked for the information in DJI Dev site but found none.
rishabh1024
@rishabh1024
Hi,
I'm facing an error while connecting N3 flight controller with Nvidia Nano with Ubuntu 18.04 using UART pins on Nano and API port on the flight controller. While running the sample code I receive the following error:
"Drone version not found, please do not proceed."
lbdhr
@lbdhr
you can reverse the RXD and TXD and have a try
JongWoon Lee
@sharkvary
Is it possible to get LiPO Battery info by OSDK?
github-user-007
@github-user-007
@dji-dev M600Pro OnboardSDK3.9: xOffset will be yawDesired instead of forward when using "moveByPositionOffset(vehicle, yOffsetDesired, zOffsetDesired, yawDesired)",please give help!!!
github-user-007
@github-user-007
How can I set HorizontalCoordinate to HORIZONTAL_BODY? Onboard SDK
Twinkly1993
@Twinkly1993
I installed Onboard-SDK3.9 before, and I changed it to version 4.0 today. I found that the program failed to compile. It seems that some header files were not found, and the path needs to be changed....How do I delete the path that points to version 3.9 and change it to point 4.0 version
kangmin7
@kangmin7
"Drone version cannot be obtained" Error in OSDK 3.8 just can't be solved. Nothing works at all
kangmin7
@kangmin7
Lowering the Baud rate down to 115200 makes both the sample and roslaunch to work (You have to restart the drone after changing the Baudrate in Assistant 2). But I really need to use the 921600 baud rate
Naga Kiran
@Nagakiran1
Hi, What is the minimum time delay to pass the next controlling signal when DJI n3 interfaced with Jetson, I observed min 0.39 sec with Pixhawk. Can someone answer this please .
liu-jiaming
@liu-jiaming
这里是不是没有官方人员了...