Hello DJI team and user community, can anybody tell me how I can collect the timestamp info from the RTK module or Drone clock for use in my program? I'm currently using DJI::OSDK::Telemetry::RTK Struct (TOPIC_RTK_POSITION etc.) to collect latitude, longitude, and HFSL data. I need to have the drone's own timestamp alongside the above information (not the GPSinfo timestamp in time_ms and time_ns which I already have) to be saved in my program. Can somebody please help? Thanks in advance.
which may bind externally can not be used when making a shared object; recompile with -fPIC
when i make that,I get that error,How do I solve that
I was building linux sample of Onboard SDK and getting error "Port did not send" however the serial started successfully
anyone have any success using viritualRC?
Onboard-SDK not supported with DJI N3-AG FC board?
im using matrice 100
anyone ever use virtualRC before, anyone know if it is still supported on matrice 100
the matrice 100 is an enterprise drone yet the support and codebase from dji is super terrible
the whole point of enterprise products is the support
There is not much REAL support in this channel, just all of us asking for help, but no one able to actually help. I’m betting there are no dji devs on here, just users struggling with the intricacies of the DJI SDK!!
Yes, there is no real support here but you get decent support on github.
jason what do you need help with? @JasonKSchreiber
@JasonKSchreiber I agree. No one help here. Even experienced developers do noy reply, even you direct message them
How can i enable Digital zoom of XT2 using STM32 with A3 OSDK. I have looked for the information in DJI Dev site but found none.
Hi, I'm facing an error while connecting N3 flight controller with Nvidia Nano with Ubuntu 18.04 using UART pins on Nano and API port on the flight controller. While running the sample code I receive the following error: "Drone version not found, please do not proceed."
you can reverse the RXD and TXD and have a try
Is it possible to get LiPO Battery info by OSDK?
@dji-dev M600Pro OnboardSDK3.9: xOffset will be yawDesired instead of forward when using "moveByPositionOffset(vehicle, yOffsetDesired, zOffsetDesired, yawDesired)",please give help!!!
How can I set HorizontalCoordinate to HORIZONTAL_BODY? Onboard SDK
I installed Onboard-SDK3.9 before, and I changed it to version 4.0 today. I found that the program failed to compile. It seems that some header files were not found, and the path needs to be changed....How do I delete the path that points to version 3.9 and change it to point 4.0 version
"Drone version cannot be obtained" Error in OSDK 3.8 just can't be solved. Nothing works at all
Lowering the Baud rate down to 115200 makes both the sample and roslaunch to work (You have to restart the drone after changing the Baudrate in Assistant 2). But I really need to use the 921600 baud rate
Hi, What is the minimum time delay to pass the next controlling signal when DJI n3 interfaced with Jetson, I observed min 0.39 sec with Pixhawk. Can someone answer this please .