Where communities thrive


  • Join over 1.5M+ people
  • Join over 100K+ communities
  • Free without limits
  • Create your own community
People
Repo info
Activity
  • Sep 23 15:29
    blomark synchronize #1279
  • Sep 23 13:36
    stefbehl edited #1270
  • Sep 23 13:30

    bogdan-bondar on master

    Provide target quicklinks from … (compare)

  • Sep 23 13:29
    bogdan-bondar closed #1270
  • Sep 23 12:44
    blomark synchronize #1279
  • Sep 22 09:24
    stefbehl synchronize #1270
  • Sep 22 06:53
    stefbehl synchronize #1270
  • Sep 22 06:29
    bogdan-bondar closed #1281
  • Sep 22 06:29

    bogdan-bondar on master

    Remove unused (public) methods … (compare)

  • Sep 22 06:15
    harshadesai commented #914
  • Sep 22 06:02
    blomark synchronize #1279
  • Sep 22 04:51
    stefbehl opened #1281
  • Sep 21 15:19
    blomark synchronize #1279
  • Sep 21 15:04

    bogdan-bondar on master

    Adapt cancel flow (#1274) * Ad… (compare)

  • Sep 21 15:04
    bogdan-bondar closed #1274
  • Sep 21 13:20

    stefbehl on master

    Introduce action status scoped … (compare)

  • Sep 21 13:20
    stefbehl closed #1277
  • Sep 21 08:48
    bogdan-bondar synchronize #1274
  • Sep 21 07:43
    stefbehl synchronize #1277
  • Sep 20 12:42
    stefbehl synchronize #1277
xogium
@xogium
ah good
Bondar Bogdan
@bogdan-bondar
@joff13 you can build hawkbit ommiting the tests by using mvn clean install -DskipTests. You can use the docker image directly by specifying the correct env vars:
SPRING_DATASOURCE_URL, SPRING_DATASOURCE_USERNAME, SPRING_DATASOURCE_PASSWORD, SPRING_RABBITMQ_HOST, SPRING_RABBITMQ_USERNAME, SPRING_RABBITMQ_PASSWORD
joff13
@joff13
you mean variant A in the getting started ?
hawkbit/hawkbit-update-server:latest
xogium
@xogium
so are the widgets you use for selecting what OS or apps to install a select ? Maybe an accordion ?
Bondar Bogdan
@bogdan-bondar
@xogium currently we are using a ComboBox component for that, but it could not be covered/could be changed by the latest components structure
xogium
@xogium
ah
will check it out
Bondar Bogdan
@bogdan-bondar
@joff13 for example, in that case you would need to provide the env vars by appending -e spring.datasource.url=...
xogium
@xogium
hmmm this does sound like it is a LOT better
it's not 10000% perfect but it would make hawkbit usable, if a bit confusing
then again there's also the fact I try this with a screen reader these guys don't use, the orca screen reader which is the only one in linux
joff13
@joff13

I though that image was for testing only

We are providing a Spring Boot based reference Update Server including embedded H2 DB for test and evaluation purposes. Run with docker:

anyway DskipTests worked

xogium
@xogium
see also the page on accessibility I found on their website, maybe it would help you guys in making a successful and accessibile transition
er accessible, that was…
Bondar Bogdan
@bogdan-bondar
@joff13 it depends on your definition of “production” :) surely in-memory H2 DB is a poor joice for production, hence MySQL is better, however there are a lot more things to consider (scaling, distributed session/transaction management, fine-grained security, monitoring, etc.)
joff13
@joff13
yep sure
we are developing a iot monitoring system, the idea is to test everything in house and than -depending on success- consider to switch on a saas for managing iot fleet.. we just do not want to make the choice or depend on a specific provider
joff13
@joff13
@bogdan-bondar by the way... many thanks for your suggestions
hahuonga2
@hahuonga2

Hi, I want to apply the Rollout with Action type = Soft to my system, which is noted that Device can execute the update at any time, e.g. with user approval or according to its regular update time plan.
My system has hawkBit on the server and Swupdate runs on the device.

I very appreciate if someone tells me the starting point. My idea is to modify Swupdate to let the users give their approvals before new software is going to be updated. If someone knows any better approach, please let me know.

Thanks in advance!

xogium
@xogium
which version of vaadin does hawkbit currently use ?
Alexander Dobler
@dobleralex
@xogium it currently uses vaadin 8.12.3
xogium
@xogium
hmm right
KOTTIRAMSAI
@KOTTIRAMSAI
Hi, Can anyone help me to integrate OAuth2 Keycloak with eclipse/Hawkbit application (Tell me What are the Steps to be follow )
KOTTIRAMSAI
@KOTTIRAMSAI
@midnightrun , I think u have already done I have gone through the chat I known that can please help me this how to configure the keycloak to eclipse/hawkbit
Aswin-png
@Aswin-png
https://mkrak.org/2018/01/26/updating-embedded-linux-devices-part2/ If anyone is struggling to install (Beginners)SWupdate with a Yocto enviorment one of the update clients for hawkbit please use that link, it helped a lot and also very useful for RPi users. Viel spaß
Aswin-png
@Aswin-png
Hey guys,
Could someone tell me how i can keep the devices connected even after I restart my host PC? Can that be done?
giri b
@giribandari:matrix.org
[m]

Hi Experts,
I have written sample application for OTA as client and using Hawkbit server. For localhost able to open hawkbit UI and upload file and download. I want to do same for live hawkbit server that is https://hawkbit.eclipseprojects.io/ which should not be local host but it will be using some ip address here from the link after inspecting IP address of it was 40.68.130.7 , when i do ping 40.68.130.7 i am not able to get any response. can anyone please tell me how to achieve pinging for link https://hawkbit.eclipseprojects.io/

can anyone tell me, IP address that is able to send response when pinging is done for hawkbit web page https://hawkbit.eclipseprojects.io/ so that IP address when passed as argument to my sample application it will start bind and request and response is seen

giri b
@giribandari:matrix.org
[m]

:point_up: Edit: Hi Experts, @kaizimmerm,
I have written sample application for OTA as client and using Hawkbit server. For localhost able to open hawkbit UI and upload file and download. I want to do same for live hawkbit server that is https://hawkbit.eclipseprojects.io/ which should not be local host but it will be using some ip address here from the link after inspecting IP address of it was 40.68.130.7 , when i do ping 40.68.130.7 i am not able to get any response. can anyone please tell me how to achieve pinging for link https://hawkbit.eclipseprojects.io/

can anyone tell me, IP address that is able to send response when pinging is done for hawkbit web page https://hawkbit.eclipseprojects.io/ so that IP address when passed as argument to my sample application it will start bind and request and response is seen

Diego Rondini
@diegorondini
@giribandari:matrix.org :
  1. ping uses the ICMP protocol, and will not tell you whether the hawkBit service is up and running or not. It's totally legit for a host to not reply to ping
  2. IP address can vary if the sandbox is relocated to a different host
  3. probably a better idea is to just check curl UI/login replies with 200, like curl -I -X GET https://hawkbit.eclipseprojects.io/UI/login. See: https://github.com/Kynetics/hara-ddiclient/blob/master/build.gradle#L271
KOTTIRAMSAI
@KOTTIRAMSAI
Can anyone help me! in figuring out the Rest Api for validating a querie While creating a filter in target filter Screen
he arc
@he-arc:matrix.org
[m]

Hey Everyone,

Trying to set Hawkbit in a Multi-tenant setup with keycloak. Can't seem to figure out how the setup is supposed to be done and I can't find anything in the litterature. Any cues please? Do I have to provide any Spring settings, How do I link user to tenants, etc.

Thanks,

Diego Rondini
@diegorondini
:tada: Kynetics is happy to announce the hara-ddiclient library source code has now its new home in the Eclipse github repo! Clone, fork, report issues, contribute patches or star the repo to join us!
https://github.com/eclipse/hara-ddiclient
For those who don't know: Eclipse Hara is an Eclipse project aimed at facilitating the use of DDI API for devices connecting to hawkBit servers.
Documentation is still a bit lacking, but we aim to improve it and publish a first library release soon!
Alexander Dobler
@dobleralex
@diegorondini That is nice to hear, congrats for that :tada: :smile:
Diego Rondini
@diegorondini
thank you @dobleralex ! We will mention it in the hawkBit's README soon!
Bondar Bogdan
@bogdan-bondar
@diegorondini great news!
Diego Rondini
@diegorondini
thanks @bogdan-bondar . We will keep improving it!
mushir3589
@mushir3589
Hi Guys can anyone help me with how to implement SFTP in hawkbit. Thanks in advance
Yong Cong Sin
@ycsin
Hey all, I'm trying the hawkbit-client on Zephyr RTOS but encountered some issue (zephyrproject-rtos/zephyr#37324) with downloading the full firmware binary from the host. I can see that after the client sent a http get request for the firmware, the host will send the firmware in chunks with a size of 640 bytes. What I dont understand is how the data transfer works, does the http client have to acknowledge the received chunk for the host to send the next chunk?
Aswin-png
@Aswin-png
Screenshot from 2021-08-09 13-37-26.png
Screenshot from 2021-08-09 13-36-49.png
Hey guys, when docker starts Rabbitmq service keeps restarting here are the log files above and the picture of it restarting. Has anyone come across this issue if so how do i fix it and what config file should i change etc, any help is much appreiciated
Yong Cong Sin
@ycsin
@Aswin-png you need to remove one of the environmental variable, something to do with HOST or "/" in the docker-compose yaml (see the error)
Aswin-png
@Aswin-png
Thank you @ycsin but that really does not work unfortunately
Alexander Dobler
@dobleralex
@Aswin-png The message states you should remove the RABBITMQ_DEFAULT_VHOST entry in the docker-compose.yaml then restart it with docker-compose up -d
There is an GitHub issue already: eclipse/hawkbit#1157 you can replace it with just DEFAULT_VHOST probably
Yong Cong Sin
@ycsin

Anyone knows what might cause this to happen?

2021-08-11 08:39:56.966 WARN 1 --- [qtp178604517-18] o.e.h.r.e.ResponseExceptionHandler : File streaming failed: fullfileRequest zephyr.signed.bin

What Im seeing at my client is that the download might still happen after I read this message at the server, but it is extremely slow. It isn't like the 1 bytes per second that kind of slow, it is just that the transfer of the firmware chunks happens in a pretty long interval (2 min, ie every 2 mins the device will receive a chunk of 650 bytes, out of 251 KiB)

axelroy
@axelroy

Hi @KOTTIRAMSAI,

For the OpenId auth with KeyCloak, I've posted on your issue : eclipse/hawkbit#1147. Hope it helps.

xTrinitySky
@xTrinitySky
Hello, may I know does hawkbit supports mssql as well? Since the guide I found from official website doesn't mention mssql yet there is mssql dependencies from the hawkbit source code. Can I have confirmation on this? Thanks.
Alexander Dobler
@dobleralex
@xTrinitySky The main page of the repository has DB compatibilities mentioned (see here).
Aswin-png
@Aswin-png
Screenshot (45).png