Where communities thrive


  • Join over 1.5M+ people
  • Join over 100K+ communities
  • Free without limits
  • Create your own community
People
Activity
    atish-aloor
    @atish-aloor
    @omkolhe No idea. But curious what you're using it for?
    Meet Udeshi
    @udiboy1209
    @omkolhe short of remaking the LCD electronics circuit yourself, I dont think you can change the refresh rate. Also the shift registers used might be the limiting factor, in which case theres nothing you can do to the screen for a greater rate. You might find higher refresh rate screens online though
    mohit-madan
    @mohit-madan
    how can i use accelerometer readings to detect a dynamic motion, like circular motion
    Meet Udeshi
    @udiboy1209
    @mohit-madan you would be better off using gyro sensors for rotation/circular motion
    mohit-madan
    @mohit-madan
    and for detecting revolution
    @udiboy1209 and for detecting revolution??
    Dhruv Ilesh Shah
    @PrieureDeSion

    @TheShadow29 openmp you say! You've used it? I'll surely have a look!

    Thanks!

    Arka Sadhu
    @TheShadow29
    @PrieureDeSion I havent used openmp
    Sreekar Garlapati
    @gitting-it-right
    Does anyone have an avr chip ??
    Harshith Goka
    @tastelessjolt
    Suggestion for plotting data real time?
    I mean software or how to?
    Soham Shanbhag
    @sohamshanbhag
    U can use python using matplotlib, but it is slow. I did and can send u the code if you wish. Probably some other language may be faster
    Soham Shanbhag
    @sohamshanbhag
    Riddhish Bhalodia
    @riddhishb
    @PrieureDeSion one word of warning, openmp with mac is pure hell
    :P
    Dhruv Ilesh Shah
    @PrieureDeSion
    @riddhishb noted! :wink:
    parthk-git
    @parthk-git
    When we say that a mono sound is splitted into stereo (left and right channels) is it just as simple as sending half the power to my left ear piece and half to my right ear piece to create stereo effect or does something more takes place? Curious.
    Shobhna Misra
    @shobhnamisra
    I don't think so @parthk-git 'coz you don't normally get the same sound in both the ear pieces. Like, both the left and right ear-piece compliment each other, but do not give the same sound. Correct me if I'm wrong.
    parthk-git
    @parthk-git
    Yes, you are right. I forgot about that fact. So, I do know in audio mixing the music artist separates left and right channels. Then how does our headphones know how to separate the sound? Sound specialists?
    atish-aloor
    @atish-aloor
    @parthk-git "Splitting a mono sound into stereo" where is that done?
    Most music players give a stereo output as it is.
    Shobhna Misra
    @shobhnamisra
    ^And, AFAIK, stereo sound is recorded using two separate microphones or something like that, not sure though.
    parthk-git
    @parthk-git
    Well, i feel when the sound is recorded, there itself the sound engineer does audio mixing and splits the sound into 2 channels.....
    Just like an Image having RGB channels from the start...
    Soham Shanbhag
    @sohamshanbhag
    @parthk-git @shobhnamisra @atish-aloor check this out https://m.soundcloud.com/tmayne/virtual-haircut
    Shobhna Misra
    @shobhnamisra
    Woah! How!??
    parthk-git
    @parthk-git
    Okay... Those who have worked with BT (HC-05) I have this doubt. We have set the protocol to 8,N,1 with baudrate 9600, that is, 9600 bauds/sec where each baud has 1 start and 1 stop bit and 8 data bits. So, while connecting HC-05 to fpga board and transferring info, do we have to provide only the 8 bits of data which we are sending (and HC-05 itself adds the start n stop bits) or do we have to provide the start and stop bits also? Or something else altogether :P?
    Sreekar Garlapati
    @gitting-it-right
    The hc05 adds them by itself , only the data you want to send should be entered into the UDR
    Varshith Sreeramdass
    @varshiths
    The USART looks into all the transmission specifics. Just enter the data as Sreekar said.
    parthk-git
    @parthk-git
    So, I should be entering bits at a rate of 9600x8 bits/sec right? and not 9600x10?
    @sudeepsalgia
    Darshan Tank
    @darshan3
    Hello People,
    Electronics club IITB proudly presents its first ever GD on “Memristors” !
    So what exactly are Memristors?
    Memristors are, in simple words, Resistances with memory - Devices whose resistance depends on the current that had flown through it !
    It's believed that memristors have the capability to change the whole computer architecture we use now and will bring a revolution in how we use our computers and other electronics devices.
    How? Well, that's what the GD is all about :D So let's explore this exciting world of memristors on 29/07, Friday, 9 pm in Yoga room ,old SAC.
    PREREQUISITES :- Need to know basic Electromagnetism (PH-108) and basic Analog circuits for easy understanding.
    P.S. Lets learn something new going on in the field of Electronics in today's world, something more than our classroom studies.
    Shobhna Misra
    @shobhnamisra
    Do RFID tags not work properly when a few of them are at the same place? Like, not very far away (say in a room)? (It's called Tag collision or something)
    umang147
    @umang147
    If the tags are passive(i.e. One without battery) the ability to detect multiple tags depend upon the power of the device and also something called anti-collision algorithm is used.
    @atish-aloor may tell you better
    atish-aloor
    @atish-aloor
    @shobhnamisra
    Nfc chips implement anticollision usually. The standard ones can detect 2-4 cards simultaneously. This is within the detection range. Outside the range (which is what you seem to be asking about) it shouldn't matter how many cards are present.
    The detection range is normally around 4 inches for passive tags
    umang147
    @umang147
    The range depends upon the the power of the detector and also on the what frequency you are using for communication. Standard being 125kHz 13.56kHz ~900MHz
    Shobhna Misra
    @shobhnamisra
    @atish-aloor @umang147 thanks!
    khojem123
    @khojem123
    Hi, processor based project I have Raspberry pi3
    Sarthak Khandelwal
    @TheFlash98
    Is this still active?
    Aryan Agal
    @grubdragon
    Yup thats the plan
    Ujjwal Agrawal
    @ujjwalagrawal17
    👍🏻
    shagunkapur
    @shagunkapur
    Can anyone help with PPG?
    Pranav
    @sabSAThai
    You need to ask specific questions @shagunkapur :)
    Marcelo
    @xtinci0n_gitlab
    hello
    Suyog Kumawat
    @suyog19_gitlab
    is line follower is event in IIT's
    A MANOJ KUMAR
    @AMANOJK01728748_twitter
    Number of distinct boolean expressions for n variables? ?@shagunkapur @umang147
    RCSK490
    @RCSK490
    In l293d ic. Where to connect the vcc2.
    Please . After connecting to +ve of battery