Where communities thrive


  • Join over 1.5M+ people
  • Join over 100K+ communities
  • Free without limits
  • Create your own community
People
Repo info
Activity
    Piotr Esden-Tempski
    @esden
    so you can put an MFG ID into your airframe file
    and the usbrf
    so they have the same one
    then they should be able to talk to each other
    Murat Bronz
    @mrtbrnz
    hmm , how do I do it ?
    Piotr Esden-Tempski
    @esden
    so the only thing you might need to do is to use the default airframe file of lisa/s and flash it
    I think the usbrf already comes with a firmware from me that has the same transmitter stored in it
    unless you bound your usbrf to your transmitter in the mean time
    it is the airframes/examples/ladybird_lisa_s.xml airframe file
    Murat Bronz
    @mrtbrnz
    nope I didn't bind anything yet, but I reflashed the USBRF with my computer
    Piotr Esden-Tempski
    @esden
    ok that should be fine
    the default in the repository should be my transmitter anyways :)
    Murat Bronz
    @mrtbrnz
    and I reflashed the Lisa/S too
    Piotr Esden-Tempski
    @esden
    humm then they should use the same mfg id
    strange
    as I think I had the same one stored in both the airframe file and the superbitrf repo
    Murat Bronz
    @mrtbrnz
    Actually, when I first powered Lisa/S while the USBRF not flashed by me, there was an activity on USBRF's leds … probably they were communicating at that time, but I never checked the GCS at that moment… and I continued with flashing and so on, so probably I changed it when I flashed the USBRF with the new superbitrf repo...
    Piotr Esden-Tempski
    @esden
    That is posible
    Use the repo of 1bit squared
    Although my repo shoul be in sync
    Murat Bronz
    @mrtbrnz
    Ok thanks !
    Piotr Esden-Tempski
    @esden
    Which airframe file and paparazzi repository are you using?
    Regarding gitter you should join hpaparazzi/discuss and 1bitsquared/discuss
    I will add you
    Murat Bronz
    @mrtbrnz
    yep thanks ! I am 5 commits behind the latest master now (which are probably last IMAV fixes) and I used the lisa/s quad file on the airframe examples folder. Btw, this is Murat :) so monday probably I will fly ENAC's first Lisa/S quad :) Plane is for october, after I came from vacations :)
    Piotr Esden-Tempski
    @esden
    heh :)
    yeah felix told me who you are … I did not know :D
    yeah the 5 commits should not hurt anything
    so when you have access to your transmitter
    you should be able to bind and have the lisa/s store the values if you use paparazzi/paparazzi#792
    I did some testing on it and it seems to be doing the right thing
    Murat Bronz
    @mrtbrnz
    ok! Thanks again!
    Freek van Tienen
    @fvantienen
    Hi nice to see you here :)
    And nice to see so much activity on gitter now.. only keeping track of it all requires some time ^^
    Murat Bronz
    @mrtbrnz
    Thanks @fvantienen , yep lots of activity and lots of place to watch at the same time ! not so easy :)
    Piotr Esden-Tempski
    @esden
    I submitted a feature request to the gitter guys: gitterHQ/gitter#337
    that should make the problem little bit less :)
    flunge
    @flunge
    Hi, I just got one set of LadyLisa and try to bind the superbitrf USB dongle to my newly bought Spektrum DX6i TX. I tried for several times and cannot bind... Is there any methods to fix?
    Zac Manchester
    @zacinaction
    I've gotten the firmware compiled and flashed onto the Superbit. Are there any examples on the PC side for communicating with the USB stick?
    ByoungJu-Lee
    @ByoungJu-Lee
    Hi. I will use Lisa/s autopilot as FCC of my robot. So i followed PAPARAZZI INSTALLATION guide, and finish that. And then I follow Lisa/s/Tutorial/Nano Quadcopter guide/ but i stopped at uploading firmware to Lisa/s in STEP 6-Build and upload the Lisa/S firmware, more exactly No.13 in STEP 6.
    plz help me.
    WL Chan
    @woeileong1104
    @esden I can't bind my Dx6i with the CYRF, but USBRF works fine. I retrieved the ID of the transmitter and add it in my airframe file, built and uploaded to my Lisa/S, but still no bind. The Lisa/S was working fine, but it started not working two days ago. The alive and IMU LED are off, and binding wouldn't work. Uploading seems to work just fine. Any idea?
    WL Chan
    @woeileong1104
    @esden although the Alive and IMU LED are off, everything seems to be working fine, I can receive telemetry through UART. All looks ok. It is just that I can't bind it to the transmitter. I tried with another transmitter, same thing.
    WL Chan
    @woeileong1104
    @esden Update: The transmitter ID shown on GCS is different from the one I set in airframe file. Unable to change it through the GCS.
    WL Chan
    @woeileong1104
    @esden Update: my radio ID is 0x939D687B, the ID shown on GCS is 0x939D6800. Seems like the LSB is missing.
    WL Chan
    @woeileong1104
    @esden Update: I tried setting the ID on GCS to 0x939D697B. Then it shows 0x939D6900. I am quite sure the LSB is missing, but I have no idea why.
    WL Chan
    @woeileong1104
    @esden Update: the problem occurs when the ID is larger than 0xFFFFFF. Then it starts skipping numbers. After 0x1000000, it skips 2, after 0x2000000 it skips 4, after 0x4000000 it skips 8, after 0x8000000 it skips 16, after 0x10000000 it skips 32, after 0x20000000 it skips 64, after 0x4000000 it skips 128, after 0x80000000 it skips 256. The problem persists even if I assign the ID number inside void superbitrf_set_mfg_id(uint32_t id) of superbitrf.c. Totally clueless here.
    WL Chan
    @woeileong1104
    correction: after 0x40000000 it skips 128
    Stéphane Davy
    @SwissNewSpace_twitter
    @ByoungJu-Lee maybe the reference voltage missing to the level shifter. Piotr adviced me a few weeks ago and this solved my issue; I couldn't flash the STM32F1 processor. "If you have a Black Magic Probe V2.0 or V2.1 you need to set mon tpwr enable otherwise the level shifters on the probe don’t have a reference voltage and nothing will work. I think the paparazzi black magic flash script is not setting that. The Lisa/S does not have reference voltage on it’s SWD connector, that would provide the level shifters with the reference voltage. That is why you need the tpwr config. you need to add the mon tpwr enable line to the gdb script: https://github.com/paparazzi/paparazzi/blob/master/sw/tools/flash_scripts/bmp_swd_flash.scr
    You can add it just before the monitor swdp_scan line for example … you might also want to add a small delay after the tpwr enable for the voltage to stabilize, for example shell sleep 1"
    Golany84
    @Golany84
    Good day, i need an advice with my black magic probe