These are chat archives for esp8266/Arduino

4th
Aug 2015
Neil Kolban
@nkolban
Aug 04 2015 00:09
Anyone tried I2C communications using the Arduino IDE?
Michael Miller
@Makuna
Aug 04 2015 00:33
@projectgus thanks for the pointers, dumping the libs did not provide symbol that included ets_isr_attach
Angus Gratton
@projectgus
Aug 04 2015 00:43
Makuna: ah, I just realised, it's in the ROM for IoT SDK
have a look in the eagle.rom.addr.v6.ld file and you'll see its address in the ROM
this is a useful project for disassembling ROM functions https://github.com/jcmvbkbc/esp-elf-rom
Michael Miller
@Makuna
Aug 04 2015 02:07
ok, but how do I build it?
Angus Gratton
@projectgus
Aug 04 2015 02:45
Makuna: build what, sorry?
Michael Miller
@Makuna
Aug 04 2015 02:59
the project you linked to, it has no instructions on how to build it
Angus Gratton
@projectgus
Aug 04 2015 03:04
Makuna: copy eagle.rom.addr.v6.ld into that directory and run 'make'
it should spit out an .elf file with the symbols from the linker script attached to the binary data from the ROM (binary data already in repo)
so you can then objdump it or whatever
Michael Miller
@Makuna
Aug 04 2015 03:09
make from what build system? I have like five on my system and I am sure there are more.
Angus Gratton
@projectgus
Aug 04 2015 03:09
probably almost any version of GNU make
you'll either need the xtensa-lx106-elf- toolchain binaries on your path, or you'll need to edit the makefile to add the paths
Harrison Mclean
@h4rm0n1c
Aug 04 2015 04:47
I've fallen in love, with EAGLE.
Shelby Merrick
@forkineye
Aug 04 2015 12:39
Anyone care to verify this before I submit an issue on it?
void setup() {
    Serial.begin(115200);
    Serial.println("");

    float x = 2.0; 
    float y = 2.2;

    int i;
    for(i = 0; i < 10; i++) {
        Serial.println(pow(i, x));
        //Serial.println(pow(i, y));  // Fails to compile
    }
    Serial.println(pow(i, y));        // Compiles fine, 10 ^ 2.2
}
Ivan Grokhotkov
@igrr
Aug 04 2015 12:43
@forkineye which OS are you on? also what error message do you get? Just tried this on OS X, compiles fine.
Shelby Merrick
@forkineye
Aug 04 2015 12:43
@igrr Windows 8.1 64 and Windows 7 64
one sec, will get the message
Ivan Grokhotkov
@igrr
Aug 04 2015 12:44
ok, then i think there is an existing issue about that
libm.a didn't get updated apparently
Shelby Merrick
@forkineye
Aug 04 2015 12:45

Arduino: 1.6.5 (Windows 8.1), Board: "NodeMCU 1.0 (ESP-12E Module), 80 MHz, 115200"

c:/users/<user>/appdata/roaming/arduino15/packages/esp8266/tools/xtensa-lx106-elf-gcc/1.20.0-26-gb404fb9/bin/../lib/gcc/xtensa-lx106-elf/4.8.2/../../../../xtensa-lx106-elf/lib\libm.a(lib_a-e_pow.o):(.literal+0x104): undefined reference to __ieee754_sqrt' c:/users/<user>/appdata/roaming/arduino15/packages/esp8266/tools/xtensa-lx106-elf-gcc/1.20.0-26-gb404fb9/bin/../lib/gcc/xtensa-lx106-elf/4.8.2/../../../../xtensa-lx106-elf/lib\libm.a(lib_a-e_pow.o): In functionieee754_pow':
d:\ivan\projects\arduinoesp\toolchain\dl\esp-newlib\build\xtensa-lx106-elf\newlib\libm\math/../../../../../newlib/libm/math/e_pow.c:164: undefined reference to `
ieee754_sqrt'
collect2.exe: error: ld returned 1 exit status
Error compiling.

Ivan Grokhotkov
@igrr
Aug 04 2015 12:45
will bump toolchain version with the next boards manager package release
Shelby Merrick
@forkineye
Aug 04 2015 12:45
ah, ok. i tried latest stable and staged versions
is there a way i could jam the latest toolchain in?
Ivan Grokhotkov
@igrr
Aug 04 2015 12:46
as a workaround, delete downloaded toolchain archive (in the staging folder around c:/users/<user>/appdata/roaming/arduino15/)
and then try installing through the boards manager again
Shelby Merrick
@forkineye
Aug 04 2015 12:48
did that, but it pulled down the same 1.20.0-26-gb404fb9 again it seems
Ivan Grokhotkov
@igrr
Aug 04 2015 12:48
same size?
that's weird
Shelby Merrick
@forkineye
Aug 04 2015 12:49
not sure , wiped the staging and install directories so it was all gone
win32-xtensa-lx106-elf-gb404fb9.tar.gz is what its pulling down though
Ivan Grokhotkov
@igrr
Aug 04 2015 12:50
ok, the name will stay the same (this is the reason it didn't grab updated toolchain in the first place)
but the size should change
give it a go by compiling your sketch
Shelby Merrick
@forkineye
Aug 04 2015 12:50
i wipe it again on my other machine and re-try
Same issue from a clean install from the staging json. If i uncomment Serial.println(pow(i, y)); // Fails to compile it fails to compile with the same error
Ivan Grokhotkov
@igrr
Aug 04 2015 13:00
ok, I'll rebuild windows toolchain, perhaps some functions were not included.
Shelby Merrick
@forkineye
Aug 04 2015 13:08
md5 on win32-xtensa-lx106-elf-gb404fb9.tar.gz is 7e6cf4fb104022ddee0b9ef716232439 if that helps
Juppit
@Juppit
Aug 04 2015 13:34
On build 1.6.5-991-gff34218 from today, I have no problem with pow(i,y).
Windows 8.1 64bit
Shelby Merrick
@forkineye
Aug 04 2015 13:40
@Juppit with the same toolchain?
Juppit
@Juppit
Aug 04 2015 13:42
should be the same. so rebuild will have no effect?
Shelby Merrick
@forkineye
Aug 04 2015 13:47
Seems to be an issue with 1.20.0-26-gb404fb9 for me
repeated it on two machines so far with this - https://gist.github.com/forkineye/d05909c5c0184c7300ae
only fails to compile when its inside the loop. compiles fine outside
Juppit
@Juppit
Aug 04 2015 13:53

I can confirm this issue with your code:
Arduino: 1.6.5 (Windows 8.1), Platine: "Generic ESP8266 Module, Serial, 80 MHz, 40MHz, DIO, 115200, 4M (3M SPIFFS)"

lx106-elf-gcc/1.20.0-26-gb404fb9/bin/../lib/gcc/xtensa-lx106-elf/4.8.2/../../../../xtensa-lx106-elf/lib\libm.a(lib_a-e_pow.o):(.literal+0x104): undefined reference to `__ieee754_sqrt'

Shelby Merrick
@forkineye
Aug 04 2015 13:56
ah, good to know it's not just me then, thanks!
Russ Mathis
@RussMathis
Aug 04 2015 14:03
When trying to compile in eclipse for windows I'm getting: "function ' snprintf' could not be resolved. Am I missing something? I included <stdio.h> and tried std::snprintf
Shelby Merrick
@forkineye
Aug 04 2015 14:08
unfamiliar with the build system when using eclipse, sorry
is it makefile based?
Russ Mathis
@RussMathis
Aug 04 2015 14:09
I'm using the Eclipse Arduino plugin
Shelby Merrick
@forkineye
Aug 04 2015 14:12
hmmm.. i may have to try that out. i was using Visual Micro w/ VS 2013 community, but mainly just been using Sublime lately then opening the sketch in the Arduino IDE to compile / upload
Russ Mathis
@RussMathis
Aug 04 2015 14:13
Having been using VS 2013 also but keep getting warnings about wrong parameter counts for functions like sprintf, strtod, snprintf, etc. so decided to try eclipse and see if it would resolve those issues.
Ivan Grokhotkov
@igrr
Aug 04 2015 14:14
@forkineye there already is an open issue on github regarding libm, no need to open another one :)
will look into that anyway
Shelby Merrick
@forkineye
Aug 04 2015 14:15
oh, i didn't. just added it to the existing one :)
esp8266/Arduino#612
Russ Mathis
@RussMathis
Aug 04 2015 14:16
google results for searches like "eclipse snprintf could not be resolved" keep mentioning minGW directory missing from build includes
Shelby Merrick
@forkineye
Aug 04 2015 14:17
@RussMathis is this the plugin you're using? http://eclipse.baeyens.it/installAdvice.shtml
seems to be some issues with it
Russ Mathis
@RussMathis
Aug 04 2015 14:19
@forkineye , I see that, just trying to resolve my better understanding if by including the proper files might help to fix the issues... :)
Shelby Merrick
@forkineye
Aug 04 2015 14:19
can you get anything to compile with it or is just snprintf giving you issues?
btw, i noticed the parameter issue w/ VS2013 as well. it would always think functions like memcpy() were wrong
Neil Kolban
@nkolban
Aug 04 2015 14:20
Howdy guys ... would anyone mind if I looked into how to build ESP8266 apps using the Arduino libraries on Eclipse? I think the Arduino ESP project is awesome but I prefer the Eclipse editor ... I'd like to have a go at combining the two?
Russ Mathis
@RussMathis
Aug 04 2015 14:22
Exactly, very annoying, trying to determine if it would be better to just clone and start building from this projects base. :(
Shelby Merrick
@forkineye
Aug 04 2015 14:25
@nkolban not sure, haven't given it a try yet. @RussMathis you do the plugin for their bundle from http://eclipse.baeyens.it/stable-win.html?
*or
Russ Mathis
@RussMathis
Aug 04 2015 14:26
@forkineye , yes I'm using the stable-win.html
Wondering what @igrr is using. Seems he's have good success at building/compiling? Maybe that would be a better build platform?
Ivan Grokhotkov
@igrr
Aug 04 2015 14:51
There is a document on using Arduino Eclipse plugin by @Links2004 : https://github.com/esp8266/Arduino/blob/esp8266/docs/eclipse/eclipse.md
I'm not using that myself though...
Russ Mathis
@RussMathis
Aug 04 2015 14:54
@igrr, what development platform do you use?
Neil Kolban
@nkolban
Aug 04 2015 14:55
Awesome link .. thanks for that ... I hadn't considered leveraging the Arduino ATmega plugins for Eclipse for ESP8266 .... I was thinking of using the base Eclipse C Developer Tools (CDT) and starting from there.... but this makes sense.
Ivan Grokhotkov
@igrr
Aug 04 2015 14:55
@RussMathis I use Atom editor, and I build sketches using arduino IDE command line most of the time.
Neil Kolban
@nkolban
Aug 04 2015 14:56
Has the conference started yet?
Ivan Grokhotkov
@igrr
Aug 04 2015 14:57
It's on the way, today is day 2 of our workshop
Russ Mathis
@RussMathis
Aug 04 2015 14:57
@igrr , your referring to https://atom.io?
Ivan Grokhotkov
@igrr
Aug 04 2015 14:58
yep, that one
Russ Mathis
@RussMathis
Aug 04 2015 14:59
Cool, thanks. This is what you use for building the actual esp8266/arduino libraries or simply testing if they work for the arduino platform?
Ivan Grokhotkov
@igrr
Aug 04 2015 15:01
That's what i use for writing code. When I need to build the sketch, I use Arduino IDE (command line or GUI).
Russ Mathis
@RussMathis
Aug 04 2015 15:03
OK, but when you build the esp8266/Arduino libraries you use gcc++ and make?
Ivan Grokhotkov
@igrr
Aug 04 2015 15:04
I'm not sure what you mean by "esp8266/Arduino libraries". The libraries (like ESP8266WiFi, ESP8266WebServer) are only built when you click "Verify" button in the IDE.
There is no additional build stage.
Russ Mathis
@RussMathis
Aug 04 2015 15:05
I'm trying to get a handle on where to start for building directly with xtensa itself and a clone of the esp8266/Arduino project... :)
Ivan Grokhotkov
@igrr
Aug 04 2015 15:06
If you want to build the IDE from source, go to build directory and run ant dist
This will build Arduino IDE (which is written in Java)
Neil Kolban
@nkolban
Aug 04 2015 15:07
@RussMathis - I think if we got our mind around the "architecture" of setup() and loop() as found in the Arduino environment, that would really help. One of the major differences (in my mind) is that area. In principle, the SDK story will put your ESP into a blocking mode until something happens while the Arduino architecture is busy run in loop() ... as I understand it.
Russ Mathis
@RussMathis
Aug 04 2015 15:09
Yes, from your book pdf I learned more than in the last 3 months HA/HA. thanks. That is exactly what I want... More on how to write code from that level. I would like to find information on a good development platform where I don't run into these missing headers and library definitions.
And with the work provided by the Arduino IDE team it should be a good jumping platform to learn MUCH more.. yummy!
Ivan Grokhotkov
@igrr
Aug 04 2015 15:11
@RussMathis regarding your original problem, I just compiled this sketch with Arduino IDE, seems to compile just fine:
void loop() {
  // put your main code here, to run repeatedly:
  char buf[100];
  snprintf(buf, 100, "asdadasd");
}
Neil Kolban
@nkolban
Aug 04 2015 15:11
@RussMathis I'm focusing on the Arduino story for the September release ... adding examples and programmer guides ... ive covered the WiFi classes and finished the I2C (Wire) last night ...
Russ Mathis
@RussMathis
Aug 04 2015 15:12
@igrr, yes it does compile with Arduino IDE, just not with Eclipse Plugin.
Neil Kolban
@nkolban
Aug 04 2015 15:13
@RussMathis As far as I can tell, there is nothing to prevent us from using the SDK APIs in the Arduino environment directly ... if desired.
Russ Mathis
@RussMathis
Aug 04 2015 15:14
I've been trying to build project with either Visual Studio or Eclipse. These IDEs seem much richer and capable than the Arduino IDEs limited features.
Markus
@Links2004
Aug 04 2015 15:15
k will test it one moment
Russ Mathis
@RussMathis
Aug 04 2015 15:15
@nkolban, yes I've been working with the wrapping some "C" functions. However, the ESP IDE team has provided so much wrapping already it is not often more is needed. :) But now I'm getting where I want to learn more...
Neil Kolban
@nkolban
Aug 04 2015 15:15
@RussMathis I agree ... different audiences for the IDEs .... Arduino is succesfull because it is "simple" ... Eclipse is professional but "scary" to folks who aren't programming savy. Arduino is PERFECT as an entry point ... not initimdating in the least ... while for "professional" work, we want professional quality grade environments.
Markus
@Links2004
Aug 04 2015 15:16
the code builds in eclipse fine 17:15:23 Build Finished (took 5s.385ms)
Russ Mathis
@RussMathis
Aug 04 2015 15:17
Hi, @Links2004, in Eclipse what could cause the snprintf issue? I've installed the latest Arduino Plugin but still can't successfully build with snprintf... :(
Markus
@Links2004
Aug 04 2015 15:17
whats the exact output?
Russ Mathis
@RussMathis
Aug 04 2015 15:18
function snprintf could not be resolved
Markus
@Links2004
Aug 04 2015 15:19
when you compile?
Russ Mathis
@RussMathis
Aug 04 2015 15:19
in the ide editor window
It will not show parameter list or any of those nice auto complete features
Markus
@Links2004
Aug 04 2015 15:21
you mean this:
blob
Russ Mathis
@RussMathis
Aug 04 2015 15:21
same when trying to use other standard function like sscanf, printf, etc, etc
Yup, eactly I can't get that... :(
Neil Kolban
@nkolban
Aug 04 2015 15:22
@Links2004 What editor is that? Looks nice.
Markus
@Links2004
Aug 04 2015 15:22
try to open the procet properties select Arduino and then pres appl this shut correct the include paths
its Eclipse in dark :)
Neil Kolban
@nkolban
Aug 04 2015 15:23
@Links2004 Aha!! :-)
Russ Mathis
@RussMathis
Aug 04 2015 15:23
Still same... :(
Markus
@Links2004
Aug 04 2015 15:24
try:
blob
Russ Mathis
@RussMathis
Aug 04 2015 15:24
ok, but what are you using to make the images?
Russ Mathis
@RussMathis
Aug 04 2015 15:26
where is that menu in the images? I can't find one like it?
in my eclipse?
Markus
@Links2004
Aug 04 2015 15:26
context menu of the project in project exploer
Russ Mathis
@RussMathis
Aug 04 2015 15:27
ahh, thx
same thing?
:(
now when typing in snprintf it automatically changes to ssnprintf
Markus
@Links2004
Aug 04 2015 15:29
how do you include paths looking.
blob
i get a phone call, later one we can check more.
Russ Mathis
@RussMathis
Aug 04 2015 15:31
blob
Markus
@Links2004
Aug 04 2015 15:53
includes looking good. have you in #include <Arduino.h>
at the top of the code?
Russ Mathis
@RussMathis
Aug 04 2015 15:57
yes
Markus
@Links2004
Aug 04 2015 15:58
is the file extension .cpp or .ino
Russ Mathis
@RussMathis
Aug 04 2015 15:59
yes
Markus
@Links2004
Aug 04 2015 16:00
which ?
Russ Mathis
@RussMathis
Aug 04 2015 16:00
cpp
I've added both to be considered c++ file source types though
Markus
@Links2004
Aug 04 2015 16:03
k same as me, can you open the stdio.h in eclipse and check the highlighting there.
its here:
blob
Russ Mathis
@RussMathis
Aug 04 2015 16:05
confused, what should I be checking? Have the stdio.h file open but not sure what to look for?
I've opened it from the Outline tab
Markus
@Links2004
Aug 04 2015 16:07
eclipse highlight code which is not used (ifdef) check the
int    _EXFUN(snprintf, (char *, size_t, const char *, ...)
               _ATTRIBUTE ((__format__ (__printf__, 3, 4))));
Russ Mathis
@RussMathis
Aug 04 2015 16:07
ok, searching now...
int _EXFUN(sprintf, (char , const char , ...)
ATTRIBUTE ((format (_printf, 2, 3))));
Markus
@Links2004
Aug 04 2015 16:08
example (colors are different):
blob
top is used bottom is not used
the text keeps the same :) eclipse only show you what the IDE is thinking of the defines
which one a "akive" and not.
Russ Mathis
@RussMathis
Aug 04 2015 16:10
ok, i can't find and sprintf that is gray in color only white backgrounds
Markus
@Links2004
Aug 04 2015 16:11
k, strange then is shut work.
try to include the stdio.h befor the Arduino.h and check again
Russ Mathis
@RussMathis
Aug 04 2015 16:12
now I get more errors
but still in the snprintf function only
Markus
@Links2004
Aug 04 2015 16:13
where eclipse is jumping when you mark the snprintf and press F3
Russ Mathis
@RussMathis
Aug 04 2015 16:14
says snprintf cannot be resolved when hovering over it and pressing F2
F3 same thing
Markus
@Links2004
Aug 04 2015 16:15
what is you eclipse version?
blob
Russ Mathis
@RussMathis
Aug 04 2015 16:16
same as yours
Markus
@Links2004
Aug 04 2015 16:17
ok, getting out of ides.
can you zip your workplace and send ?
Russ Mathis
@RussMathis
Aug 04 2015 16:19
ok
Russ Mathis
@RussMathis
Aug 04 2015 16:24
Somehow introduced missing closing brace in stringPADR function before archiving
Markus
@Links2004
Aug 04 2015 16:25
ok have the same problem will check the settings
Russ Mathis
@RussMathis
Aug 04 2015 16:25
thx
Markus
@Links2004
Aug 04 2015 16:25
blob
ok you arduino plugin is older, try to update over:
Russ Mathis
@RussMathis
Aug 04 2015 16:28
k
Markus
@Links2004
Aug 04 2015 16:28
blob
Russ Mathis
@RussMathis
Aug 04 2015 16:28
downloading now
Russ Mathis
@RussMathis
Aug 04 2015 16:28
says no updates were found?
Markus
@Links2004
Aug 04 2015 16:29
blob
check the config in Preference
Russ Mathis
@RussMathis
Aug 04 2015 16:30
blob
Markus
@Links2004
Aug 04 2015 16:31
the last one is wrong remove it, and enable the one before
Russ Mathis
@RussMathis
Aug 04 2015 16:31
k
Do i need to close and reopen?
Markus
@Links2004
Aug 04 2015 16:31
wait
remove 3 + 4 too
Russ Mathis
@RussMathis
Aug 04 2015 16:32
blob
Markus
@Links2004
Aug 04 2015 16:32
and edit the CDT to http://download.eclipse.org/tools/cdt/releases/8.6 and enable it
the try to check updates again
Russ Mathis
@RussMathis
Aug 04 2015 16:33
K
Russ Mathis
@RussMathis
Aug 04 2015 16:44
Maybe I need to reinstall from scratch?
Markus
@Links2004
Aug 04 2015 16:44
update not working?
Russ Mathis
@RussMathis
Aug 04 2015 16:45
Ok, retrying
no updates were found
says: No repository found at http://www.baeyens.it/eclipse/
Russ Mathis
@RussMathis
Aug 04 2015 16:46
ok
restarting to see if that will work
still says no updates found
Markus
@Links2004
Aug 04 2015 16:50
try to reinstall eclipse
Russ Mathis
@RussMathis
Aug 04 2015 16:51
ok
should i install with the nightly build?
Markus
@Links2004
Aug 04 2015 16:52
yes
Russ Mathis
@RussMathis
Aug 04 2015 16:52
k
downloading 2015-07-28
Markus
@Links2004
Aug 04 2015 16:53
the rest of you work space looking good.
Russ Mathis
@RussMathis
Aug 04 2015 16:53
Strange, something corrupted somewhere... :(
Russ Mathis
@RussMathis
Aug 04 2015 17:07
just finished downloading trying to build workspace
Compiles ok but not flashing
but still issue with snprintf :(
checking for updates
updates found: downloading now...
update complete, restarting
still no snprintf info
Markus
@Links2004
Aug 04 2015 17:14
k i am out of ideas right now, may i check it at weekend
Russ Mathis
@RussMathis
Aug 04 2015 17:14
OK, how about the flashing part? it does not flash
Markus
@Links2004
Aug 04 2015 17:15
what error you get
Russ Mathis
@RussMathis
Aug 04 2015 17:15
comes up real quick and shows the Launching C:\Users\Russ\AppData\Roaming\Arduino15\packages\esp8266\tools\esptool\0.4.6/esptool.exe true -cd ck -cb 115200 -cp COM9 -ca 0x00000 -cf D:_ArduinoSketches_1.6.0\Eclipse\RaceMaster_Display_V0/Release/RaceMaster_Display_V0.bin
Output:
0.4.6/esptool.exe finished
upload done
No error just dialog comes up and disappears quickly
Markus
@Links2004
Aug 04 2015 17:15
D:_ArduinoSketches_1.6.0\Eclipse\RaceMaster_Display_V0/Release/RaceMaster_Display_V0.bin looks strange to me
after D: shut be a \
Russ Mathis
@RussMathis
Aug 04 2015 17:17
OK, where is that string located? generated from?
Now I get: Launching C:\Users\Russ\AppData\Roaming\Arduino15\packages\esp8266\tools\esptool\0.4.6/esptool.exe true -cd ck -cb 57600 -cp COM9 -ca 0x00000 -cf D:_ArduinoSketches_1.6.0\Eclipse\RaceMaster_Display_V0/Release/RaceMaster_Display_V0.bin
Output:
0.4.6/esptool.exe finished
upload done
it shows up in my console window but will not copy to this window properly
Markus
@Links2004
Aug 04 2015 17:19
is the bin file existing on the HDD
Russ Mathis
@RussMathis
Aug 04 2015 17:19
YES
blob
Markus
@Links2004
Aug 04 2015 17:20
does it work when you runn it in console?
Russ Mathis
@RussMathis
Aug 04 2015 17:21
Loving ShareX, thx!
Don't understand? run it in the console?
Markus
@Links2004
Aug 04 2015 17:21
win + r --> cmd --> C:\Users\Russ\AppData\Roaming\Arduino15\packages\esp8266\tools\esptool\0.4.6\esptool.exe true -cd ck -cb 57600 -cp COM9 -ca 0x00000 -cf D:_ArduinoSketches_1.6.0\Eclipse\RaceMaster_Display_V0\Release\RaceMaster_Display_V0.bin
Russ Mathis
@RussMathis
Aug 04 2015 17:22

I get: Starting upload
using arduino loader
Starting reset using DTR toggle process
Flushing buffer
Toggling DTR
Continuing to use COM9
Ending reset using DTR toggle process

Launching C:\Users\Russ\AppData\Roaming\Arduino15\packages\esp8266\tools\esptool\0.4.6/esptool.exe true -cd ck -cb 57600 -cp COM9 -ca 0x00000 -cf D:_ArduinoSketches_1.6.0\Eclipse\RaceMaster_Display_V0/Release/RaceMaster_Display_V0.bin
Output:
0.4.6/esptool.exe finished
upload done

No
No error or other output at all
Markus
@Links2004
Aug 04 2015 17:23
then the esptool.exe is broken @igrr some changes ther in the last time?
Russ Mathis
@RussMathis
Aug 04 2015 17:26
ok, so remove staging package and try latest release version?
Markus
@Links2004
Aug 04 2015 17:27
replacing the esptool.exe shut work
Russ Mathis
@RussMathis
Aug 04 2015 17:28
ok, thax
getting the same issue, does not flash
Markus
@Links2004
Aug 04 2015 17:31
oO try to replace all / with \
Russ Mathis
@RussMathis
Aug 04 2015 17:31
ok
nope
no luck with that either
will try to change to latest package instead of staged
Markus
@Links2004
Aug 04 2015 17:43
not a good day....
Russ Mathis
@RussMathis
Aug 04 2015 17:43
The regular arduino IDE uploads ok
ZaPpInG
@lrmoreno007
Aug 04 2015 20:47
@RussMathis Read this:
esp8266/Arduino#610
You have "true" but is the same problem
Russ Mathis
@RussMathis
Aug 04 2015 20:49
Thx @lrmoreno007, I'll give it a shot! My eyes are getting sore! LOL
Russ Mathis
@RussMathis
Aug 04 2015 21:40
@anybody?? does anyone know of a wiring configuration that will power the esp when a button is pressed and when the esp is done processing it can set a pin to turn the power off? Like a door bell button... when you press the button the switch would send power to the esp and a transistor with cap would keep power going until the esp grounded via a pin?
Michael Miller
@Makuna
Aug 04 2015 22:05
@RussMathis there are switching power supply chips that have this feature built in, a trigger powers the converter and leaves it running until another pin is lowered.