These are chat archives for esp8266/Arduino

10th
Jan 2016
Aditya Tannu
@AdySan
Jan 10 2016 00:05
Fro WS2812B/NeoPixels, is this the recommended library when using with Wifi? https://github.com/JoDaNl/esp8266_ws2812_i2s
Tried the UART driven branch here, but wont work, probaby a pullup resistor problem https://github.com/Makuna/NeoPixelBus
Aditya Tannu
@AdySan
Jan 10 2016 03:57
just deployed https://github.com/JoDaNl/esp8266_ws2812_i2s Pretty smooth, especially moving around the Hue slider on the phone, I can fade my strip pretty smoothly.
electrical problems still persist, at times the farther end of the strip (94 pixles) becomes white and there's no way to reset it other than a reboot.
Helio Machado
@crushedice2000
Jan 10 2016 12:55

@/all: Do you remember my fried Amica NodeMCU? These Christmas holidays, my father gave me a present (a hot air soldering station). Now I removed the metal shielding of the ESP-12E and you can see a big hole on the ESP8266EX. I plan to buy a ESP-12E to replace the broken one.

I think that it has a 4M flash (BergMicro 25Q32ASSIG).

P1100601.jpg
P1100600.jpg
Stavros Korokithakis
@skorokithakis
Jan 10 2016 13:03
what does the hot air station do?
Helio Machado
@crushedice2000
Jan 10 2016 13:06
@skorokithakis: To remove the metal shielding of the module. Now I desoldered the broken ESP8266 and the 4M flash memory. Lots of spare parts! :smile_cat:
Stavros Korokithakis
@skorokithakis
Jan 10 2016 13:07
but how does it work? is it like a soldering iron?
okay, riddle me this
i connected that mosfet to ground and then to the motor
it works properly and the motor turns
but if i connect another wire from the ground to the source, which IS ALREADY CONNECTED, the motor never stops turning
wtf
Helio Machado
@crushedice2000
Jan 10 2016 13:10
@skorokithakis: https://www.youtube.com/watch?v=1z0IiuQ35HU Is a heating element to heat air and then heat all the tin pants at the same time. Is great for desoldering.
Markus
@Links2004
Jan 10 2016 13:10
@skorokithakis the motor are the red wire?
Helio Machado
@crushedice2000
Jan 10 2016 13:11
You can stop turning the motor sorting drain and gate ;)
Markus
@Links2004
Jan 10 2016 13:11
@crushedice2000 bad idea can kill the ESP
Helio Machado
@crushedice2000
Jan 10 2016 13:11
@skorokithakis: I don't understand your connections. What about doing a schematic?
@Links2004: Maybe, I see something strange, but don't know what. Why the mosfet is between GPIO15 and GND?
Markus
@Links2004
Jan 10 2016 13:13
its look like it connected to GND, VCC and GPIO15.
which make no real no sense to me.
Stavros Korokithakis
@skorokithakis
Jan 10 2016 13:25
Sorry, vcc goes around to the motor and another wire comes back to connect to the drain
Markus
@Links2004
Jan 10 2016 13:25
k that make sense
its a Nmos, then add a 10k from gate to source
Helio Machado
@crushedice2000
Jan 10 2016 13:27
This message was deleted
This message was deleted
Markus
@Links2004
Jan 10 2016 13:29
@crushedice2000 its easier to remove the ESP12 board, then try to remove the chip from a working on and solder it again
Helio Machado
@crushedice2000
Jan 10 2016 13:30

More photos of the desoldered components:

P1100607.jpg

P1100603.jpg

Stavros Korokithakis
@skorokithakis
Jan 10 2016 13:31
@Links2004 ah, what will that do?
Helio Machado
@crushedice2000
Jan 10 2016 13:33
@Links2004: Only was to test the hot air station and reliably check the flash amount of my 12E. Now I have a 4M flash to solder it on a ESP-01 ;)
Markus
@Links2004
Jan 10 2016 13:33
it prevent the turning on, its for discharging the capaciti inside the MOSFET
Stavros Korokithakis
@skorokithakis
Jan 10 2016 13:36
But why would it turn on? The two are not connected. I'm connecting a wire to the wire that is already connected, that shouldn't do anything
Markus
@Links2004
Jan 10 2016 13:37
so you add a second wire from source to GND and the motor moves?
Stavros Korokithakis
@skorokithakis
Jan 10 2016 13:52
Yes
Very odd
Mario Mikočević
@mozgy
Jan 10 2016 13:52
I've replaced two flash ram chips on my esp-01
hot air gun is very useful there
Helio Machado
@crushedice2000
Jan 10 2016 13:57
@mozgy: The hot air gun is to the solder the same as the airplane to the bike ;)
Mario Mikočević
@mozgy
Jan 10 2016 13:57
;)
Stavros Korokithakis
@skorokithakis
Jan 10 2016 13:58
Which is better?
Chris Elsworth
@celsworth
Jan 10 2016 13:59
I'm considerng ordering a hot air gun, I have an 80-pin LQFP package on the way that there is no way I can do with an iron
(W5100 ethernet) :)
Chris Elsworth
@celsworth
Jan 10 2016 14:00
Mario Mikočević
@mozgy
Jan 10 2016 14:00
thats nice
Chris Elsworth
@celsworth
Jan 10 2016 14:01
I've been told the digital fine controls are invaluable
Chris Elsworth
@celsworth
Jan 10 2016 14:02
yeah digital also I see :)
Chris Elsworth
@celsworth
Jan 10 2016 14:03
oh wow, nice :)
looks similar to the one I want
even a similiar model number, both 852, heh
are Saike and Aoyue related?
ah I see that has an iron as well, quite handy
Mario Mikočević
@mozgy
Jan 10 2016 14:05
both are copies :)
Chris Elsworth
@celsworth
Jan 10 2016 14:05
ah I'm fine with that :D
I don't need to pay 3x for a brand name ;)
Helio Machado
@crushedice2000
Jan 10 2016 14:05
@mozgy: Now I'll desolder the 27 MHz clock and the LED (I don't know if they will blow at 380 celsius degrees). However, I'll test them (or at least the LED) ;)
Mario Mikočević
@mozgy
Jan 10 2016 14:06
;)
Stavros Korokithakis
@skorokithakis
Jan 10 2016 14:06
Man I'm mystified as to why it would work until I connected a second wire to the one that's already connected
Chris Elsworth
@celsworth
Jan 10 2016 14:07
sure the first wire is ok?
tested it with a DMM for continuity?
Helio Machado
@crushedice2000
Jan 10 2016 14:07
@celsworth: Mine is a ProsKit SS-989. Not the better, but it works very well. However it seems to be similar to HAKKO, AYOUE and SAIKE.
Mario Mikočević
@mozgy
Jan 10 2016 14:10
yep, any 989(d) is nice
Stavros Korokithakis
@skorokithakis
Jan 10 2016 14:12
@celsworth I haven't, I should, but why would it work? It's mystifying
Chris Elsworth
@celsworth
Jan 10 2016 14:13
I may only have half the story, but if it doesn't work with one wire across some connection or other, and works with two, well that suggests the first wire is broken :)
Stavros Korokithakis
@skorokithakis
Jan 10 2016 14:15
That's the problem! It works with one, doesn't work with two :-p
It switches whenever the GPIO is high with one, just stays on with two
Chris Elsworth
@celsworth
Jan 10 2016 14:16
oh, right :/
Stavros Korokithakis
@skorokithakis
Jan 10 2016 14:17
So I'm thinking that the wire is not connected and the design doesn't work properly, but somehow disconnecting that wire makes it half work
As a coincidence
Mario Mikočević
@mozgy
Jan 10 2016 14:30
hm? yesterdays git - can't compile ADC_MODE(ADC_VCC); without #include <FS.h> ?
Helio Machado
@crushedice2000
Jan 10 2016 14:30
P1100615.jpg
P1100617.jpg
P1100613.jpg
P1100614.jpg
P1100611.jpg
The LED works! I won't test the xtal now (I don't know how to wire it nor have skills to solder it again). I'm expecting solder paste from Ali.
Mario Mikočević
@mozgy
Jan 10 2016 14:31
uuh, those LED closeups are really big
Helio Machado
@crushedice2000
Jan 10 2016 14:32
@mozgy: Cropped, so few pixels. They were taken with the LED flashlight of a tablet, a 12MP 26X camera and a diamond cutter lens ;) And yet they seemed small to me.
Mario Mikočević
@mozgy
Jan 10 2016 14:33
yep, I desoldered few from esp-01 and manage to lose one on my test bench
26x ! figures :D
C:\Users\Mozz\Documents\Arduino\Projects\BareMinimum\BareMinimum.ino: In function 'int __get_adc_mode()':
BareMinimum:17: error: previous declaration of 'int __get_adc_mode()' with 'C++' linkage
 ADC_MODE(ADC_VCC);
     ^
Martin Ayotte
@martinayotte
Jan 10 2016 14:36
This kind of error is usually missing 'extern "C" {'
Stavros Korokithakis
@skorokithakis
Jan 10 2016 14:36
Do you guys think I should use a transistor instead to drive the motor?
Mario Mikočević
@mozgy
Jan 10 2016 14:36
that very same sketch compiled before
only difference is stable 2.0.0 -> yesterdays git
Helio Machado
@crushedice2000
Jan 10 2016 14:37
@skorokithakis: A mosfet should work well. However, doing the right thing.
Chris Elsworth
@celsworth
Jan 10 2016 14:37
@mozgy try git bisect to find the breaking commit?
Martin Ayotte
@martinayotte
Jan 10 2016 14:37
@skorokithakis , stay with MOSFET. Transistor doesn't saturate well
Helio Machado
@crushedice2000
Jan 10 2016 14:39
@skorokithakis: Maybe a optocoupled mosfet to stay safe?
Downloading KiCad to make you a schematic :)
400MB@311KB/s going offline now. :worried:
Stavros Korokithakis
@skorokithakis
Jan 10 2016 14:42
@crushedice2000 it's just 3.3v,dont need optocoupled
I'll get more MOSFETs, thanks
looks like they're very useful
Chris Elsworth
@celsworth
Jan 10 2016 14:43
which one?
Stavros Korokithakis
@skorokithakis
Jan 10 2016 14:43
@celsworth which one what?
Chris Elsworth
@celsworth
Jan 10 2016 14:43
which mosfet :)
Stavros Korokithakis
@skorokithakis
Jan 10 2016 14:43
Also it looks like I didn't buy 10, I bought 100, so I'm safe :-P
oh
2N7002
Mario Mikočević
@mozgy
Jan 10 2016 14:44
ebay spam inc :D
Chris Elsworth
@celsworth
Jan 10 2016 14:44
heh leave now if you value your wallet?
Martin Ayotte
@martinayotte
Jan 10 2016 14:44
@skorokithakis , as @Links2004 suggested, test the MOSFET seperately from the ESP to see if it is working, then reconnect only GND, and test again
Stavros Korokithakis
@skorokithakis
Jan 10 2016 14:44
And AO3402
@celsworth haha
Markus
@Links2004
Jan 10 2016 14:44
2N7002 are good one working well with 3V3
Stavros Korokithakis
@skorokithakis
Jan 10 2016 14:45
@martinayotte that's what I'll do, it's a salvaged one so maybe it's broken
Chris Elsworth
@celsworth
Jan 10 2016 14:45
@skorokithakis did you get your samples ordered? :)
Martin Ayotte
@martinayotte
Jan 10 2016 14:45
@skorokithakis , is there a pull-down on the gate ?
Stavros Korokithakis
@skorokithakis
Jan 10 2016 14:47
@martinayotte I think so, I can check, but why would the source wire affect that?
@celsworth yes, but they only shipped one
Chris Elsworth
@celsworth
Jan 10 2016 14:47
did you ask for 5?
Mario Mikočević
@mozgy
Jan 10 2016 14:48
I went there too, couldnt find free samples
Martin Ayotte
@martinayotte
Jan 10 2016 14:48
@skorokithakis , I mean pulldown added by you, because if the gate is left floating, ESR can make unwanted turn on
Chris Elsworth
@celsworth
Jan 10 2016 14:49
may not be available to your country :(
Mario Mikočević
@mozgy
Jan 10 2016 14:49
could be
did register and fill all data tho ..
Chris Elsworth
@celsworth
Jan 10 2016 14:50
@mozgy as an example, do you see a Sample column under "Pricing and Samples" in http://www.microchip.com/wwwproducts/Devices.aspx?product=MCP42010 ?
and some of htem have an icon, those you can get sample for
Mario Mikočević
@mozgy
Jan 10 2016 14:51
yes, I can see that, but as soon as I click that I get pricing as normal
and then if I click the icon again (in first column now) its login time, from there its like a checkout, but without paying ;)
Stavros Korokithakis
@skorokithakis
Jan 10 2016 14:53
@martinayotte I didn't add one, no. I'm setting the GPIO low though, I'm not leaving it floating, which is why it's odd
@celsworth I asked for two items, one of each, but they only shipped the one
Chris Elsworth
@celsworth
Jan 10 2016 14:54
the other may just be coming separately :)
if they sent one then they'll probably send the other
Martin Ayotte
@martinayotte
Jan 10 2016 14:56
@skorokithakis , since it is attached on GPIO15, you still need pulldown for the boot mode.
Stavros Korokithakis
@skorokithakis
Jan 10 2016 15:00
@celsworth I'm hoping so!
@martinayotte that's true, but for now I'm wondering why it stops working when I connect another wire from source to gnd
Martin Ayotte
@martinayotte
Jan 10 2016 15:02
@skorokithakis , back to SquareOne : testing things separately ...
Mario Mikočević
@mozgy
Jan 10 2016 15:03
@celsworth ->
You have 1 type(s) of samples in your cart. [Max = 2].
  Processing Fee:     7.50 (USD)
Chris Elsworth
@celsworth
Jan 10 2016 15:03
oh processing fee :(
it must be your country :(
Mario Mikočević
@mozgy
Jan 10 2016 15:08
yep, it's stated there ->
Please note: Microchip may charge a nominal processing fee for each sample order. Taxes, duties and government charges may also apply, but will be C.O.D. These charges vary based on declared value and destination country. If you are unwilling to accept these conditions, you may discontinue this transaction now. Otherwise, click the 'Continue with Order' button.
Martin Ayotte
@martinayotte
Jan 10 2016 15:08
$7.50 for shipping is expensive if item is $0.40. Then eBay/AliExpress is probably easier ...
Mario Mikočević
@mozgy
Jan 10 2016 15:09
well, shipping is also reason I'm not getting esp32 :(
Stavros Korokithakis
@skorokithakis
Jan 10 2016 17:19
how much was the esp32?
ship it to me, i'll pay it :smile:
Martin Ayotte
@martinayotte
Jan 10 2016 17:21
They are not in production yet. It is a Beta program, only 200 units were available. Unfortunately, even if I've subscribed and been ask for my phone number, they ran out of unit and I didn't become part of the lucky ones.
Stavros Korokithakis
@skorokithakis
Jan 10 2016 17:21
@martinayotte yeah, but @mozgy was going to get a demo unit
Martin Ayotte
@martinayotte
Jan 10 2016 17:22
He probably received it before Christmas
BTW, @me-no-dev is working to port Arduino IDE for ESP32, he was part of the lucky guys
Stavros Korokithakis
@skorokithakis
Jan 10 2016 17:23
that's great, hopefully it'll be ready in time to try it out :P
Martin Ayotte
@martinayotte
Jan 10 2016 17:23
If you want to follow their new forum : http://esp32.com/index.php
Chris Elsworth
@celsworth
Jan 10 2016 17:38
@skorokithakis its pretty promising already :)
Aditya Tannu
@AdySan
Jan 10 2016 17:46

intersting question on the reddit seubreddit

WiFi.mode(WIFI_AP)
 WiFi.softAP()

can the clients communicate with each other, can we get decent throughput?

Stavros Korokithakis
@skorokithakis
Jan 10 2016 18:02
i bought a soldering iron yesterday, soldered some stuff, it was fine, but today it won't met solder, even though the tip is hot
looks like it won't conduct heat
any tips?
Markus
@Links2004
Jan 10 2016 18:03
@AdySan no the ESP has not routing functionality
@skorokithakis use some solder on the solder iron tip.
Stavros Korokithakis
@skorokithakis
Jan 10 2016 18:04
it won't stick :/
just drops down
Markus
@Links2004
Jan 10 2016 18:05
do you have a cleaning tool for it like:
1
2
Harrison Mclean
@h4rm0n1c
Jan 10 2016 18:06
wet sponge, clean and re-tin it every now and then
*damp
Stavros Korokithakis
@skorokithakis
Jan 10 2016 18:06
i have a sponge, how do you re-tin it? i don't have any of the bottom tools
Markus
@Links2004
Jan 10 2016 18:06
this normally happens when it get to hot at which temperature you set it?
@skorokithakis you need a real on no plastic stuff
Harrison Mclean
@h4rm0n1c
Jan 10 2016 18:07
you tin it by applying solder immediately after cleaning
Stavros Korokithakis
@skorokithakis
Jan 10 2016 18:07
oh, maybe it's too hot, i was raising the temperature when it wouldn't melt
@Links2004 mine is plastic, you mean real as in the animal?
@h4rm0n1c i'll try re-tinning now
Markus
@Links2004
Jan 10 2016 18:07
for PB 320° is good, for PB free 340°
Stavros Korokithakis
@skorokithakis
Jan 10 2016 18:08
it doesn't have indicators :/ just says min to max
it's from 150 C to 450 C though
Markus
@Links2004
Jan 10 2016 18:08
yes, the kitchen sponge is plastic and will melt
Stavros Korokithakis
@skorokithakis
Jan 10 2016 18:08
no, it came with the soldering station
Markus
@Links2004
Jan 10 2016 18:09
then its a good one
Stavros Korokithakis
@skorokithakis
Jan 10 2016 18:09
great
Stavros Korokithakis
@skorokithakis
Jan 10 2016 18:10
aha! thank you
Aditya Tannu
@AdySan
Jan 10 2016 18:15
@skorokithakis i'm in the market for a temperature controlled one, which one did you get?
Stavros Korokithakis
@skorokithakis
Jan 10 2016 18:16
just a very cheap one, "fixpoint" brand
Chris Elsworth
@celsworth
Jan 10 2016 18:20
if it has removable tips, check its screwed on nice and tight if its not melting solder, maybe it came loose
Stavros Korokithakis
@skorokithakis
Jan 10 2016 18:22
the tip looks chipped
i checked it yesterday, it was okay :/
Markus
@Links2004
Jan 10 2016 18:24
if the sponge not help (iron needs to be hot for cleaning)
you need a tip tinner, but in you case the sponge should do it.
Chris Elsworth
@celsworth
Jan 10 2016 18:25
I prefer the wire bundles for cleaning, the wet sponge method puts stress on the tips
because it cools it down rapidly = metal stress
the wire bundles get the crap off the tip without cooling it down nearly as much
also top tip @skorokithakis, leave your tip tinned when the iron is off, stops the tip oxidising
Markus
@Links2004
Jan 10 2016 18:27
yes, true
if the temperature set correct and you not let it on a full day with out using you need to do it once in a month or less.
Stavros Korokithakis
@skorokithakis
Jan 10 2016 18:27
oh, thanks
Stavros Korokithakis
@skorokithakis
Jan 10 2016 18:36
by tinning, do you mean i have to coat the entire tip?
Markus
@Links2004
Jan 10 2016 18:38
simple apply ~5mm solder to the tip before turning off
tinning_tip
when it look like its good.
Stavros Korokithakis
@skorokithakis
Jan 10 2016 18:41
mine doesn't want to retain any solder :/ it all just flows off
i'll lower the temp again
Markus
@Links2004
Jan 10 2016 18:41
heat it to 300-350 and use the sponge then try too apply solder to it.
Stavros Korokithakis
@skorokithakis
Jan 10 2016 18:50
that seems to be working better, the new solder is melting fine but the solder from yesterday i'm trying to re-melt won't budge as easily
Markus
@Links2004
Jan 10 2016 18:55
then you need flux pen, the old solder hat too less flux
Stavros Korokithakis
@skorokithakis
Jan 10 2016 18:55
hmm, is the ESP's GPIO high supposed to be 1.5V?
ah, i'll get one, thanks
yeah, i'm setting GPIO5 to HIGH and it's only putting out 1.5V
Markus
@Links2004
Jan 10 2016 18:59
normally its 3.3V
Martin Ayotte
@martinayotte
Jan 10 2016 19:01
@skorokithakis , is it your GPIO15 for controlling the MOSFET ? what is the value of your pulldown ?
Stavros Korokithakis
@skorokithakis
Jan 10 2016 19:02
the GPIO 5 is for the mosfet
no pulldown there
Martin Ayotte
@martinayotte
Jan 10 2016 19:02
Strange ...
Stavros Korokithakis
@skorokithakis
Jan 10 2016 19:03
yeah :/ maybe the mosfet is weird, because the motor turns slowly when the mosfet is HIGH, and fast when it's LOW
so i don't know what's going on
AP20T03GH mosfet
Martin Ayotte
@martinayotte
Jan 10 2016 19:06
Are you sur that you didn't messed up the pinout of the MOSFET ? Is it really the Gate to GPIO ? what voltage GPIO has if MOSFET not connected ?
Stavros Korokithakis
@skorokithakis
Jan 10 2016 19:17
yep, gate to gpio, source to ground and drain is what's coming from the motor
i'll have to desolder it and see what the voltage is
Stavros Korokithakis
@skorokithakis
Jan 10 2016 19:48
I should try that and see if the MOSFET is broken or something
Helio Machado
@crushedice2000
Jan 10 2016 21:49
@all_the_hardware_guys: I'm doing a space-saving design with a ESP-01. Should I remove the 4x2 pin header? Doing that could I mess something?
Mario Mikočević
@mozgy
Jan 10 2016 21:52
did that on one, replaced with wires ..
Martin Ayotte
@martinayotte
Jan 10 2016 21:53
@crushedice2000 do you mean to save space in height ?
Helio Machado
@crushedice2000
Jan 10 2016 21:57
@martinayotte: I want to save space in height.
Another question: Is there any "official" trick to put a female header for flashing? I don't want to use OTA.
@mozgy: Wires seems promising. Thanks!
Helio Machado
@crushedice2000
Jan 10 2016 22:00
@martinayotte: I have non-goldplated ones (also they are square tips). They behave well.
Stavros Korokithakis
@skorokithakis
Jan 10 2016 22:01
@martinayotte i measured the GPIO without the mosfet, it was indeed 3V3
Helio Machado
@crushedice2000
Jan 10 2016 22:04

@/all: I've done a new gadget:

ESP-01 automatic flasher

Do you remember my fried NodeMCU? Now I desoldered the ESP-12E and I use it for flashing ESP-01 circuits.

Stavros Korokithakis
@skorokithakis
Jan 10 2016 22:04
this mosfet is weird, its drain seems to always be at 3v3
and pretty hot
looks like it's shorted
@crushedice2000 what is it?
Martin Ayotte
@martinayotte
Jan 10 2016 22:06
@skorokithakis do you have some other MOFSET handy ?
@crushedice2000 , for low profile stuff, I prefer round pins, it take less pressure to insert them
Stavros Korokithakis
@skorokithakis
Jan 10 2016 22:08
@martinayotte i only have TO220 that don't saturate well
Martin Ayotte
@martinayotte
Jan 10 2016 22:09
@skorokithakis how much current your motor is taking ? you can use several 2N7002 in parallel ;-)
Helio Machado
@crushedice2000
Jan 10 2016 22:09
@martinayotte: I have bad experiences with round pins. They bend.
@mozgy: Mine is cheaper, smaller and handier :smiling_imp:
Mario Mikočević
@mozgy
Jan 10 2016 22:09
@martinayotte looks like it's time to skip the chat that follows or me shopping list will grow again :D
Martin Ayotte
@martinayotte
Jan 10 2016 22:10
:smile:
Mario Mikočević
@mozgy
Jan 10 2016 22:10
@crushedice2000 cheaper ? hmm, how much that nodemcu cost ? :)
Helio Machado
@crushedice2000
Jan 10 2016 22:11
@mozgy: :smile_cat:
@mozgy: About 4$
Also I prefer this second use. For me, the ESP-01 flashing is a authentic horror. So, if you know that the NodeMCU is dead, it costs $0.
Stavros Korokithakis
@skorokithakis
Jan 10 2016 22:13
@martinayotte not much current, but the 2n7002 haven't arrived yet, or I'd use them :-(
Helio Machado
@crushedice2000
Jan 10 2016 22:14
@skorokithakis: Stock control, please :smiling_imp:
Mario Mikočević
@mozgy
Jan 10 2016 22:14
heheheh
arducam-pcb.jpg
Helio Machado
@crushedice2000
Jan 10 2016 22:15
P1110621.jpg
Chris Elsworth
@celsworth
Jan 10 2016 22:15
you use pin header for your esp12?
Helio Machado
@crushedice2000
Jan 10 2016 22:15
Dinner time!
Stavros Korokithakis
@skorokithakis
Jan 10 2016 22:16
@crushedice2000, hey, I'm new to this :-P
First MOSFET order
Helio Machado
@crushedice2000
Jan 10 2016 22:17
@skorokithakis: :smiley_cat:
Mario Mikočević
@mozgy
Jan 10 2016 22:19
@celsworth not planning to solder that 2mm pin header 'cos I have small pitch catchers with 2.54mm dupont on the other side
hence near the pcb edge
Stavros Korokithakis
@skorokithakis
Jan 10 2016 22:20
@mozgy is that a render or photo?
Helio Machado
@crushedice2000
Jan 10 2016 22:20
@skorokithakis: Render, do you doubt it? I was learning 3d design a year ago :)
Mario Mikočević
@mozgy
Jan 10 2016 22:21
boomtown rats .. time to zzZZ, nn
Helio Machado
@crushedice2000
Jan 10 2016 22:23
@mozgy: nn
Stavros Korokithakis
@skorokithakis
Jan 10 2016 22:27
@crushedice2000 no, it just looks good. What program did you use?
Web Gerber?
Helio Machado
@crushedice2000
Jan 10 2016 22:29
@skorokithakis: I've not made this drawing. Is from @mozgy. I only responded you that is a render to keep mozgy away from the keyboard :smile: However it seems to be made with WebGerber
Stavros Korokithakis
@skorokithakis
Jan 10 2016 22:31
Oh I see, thanks
Looks great
Helio Machado
@crushedice2000
Jan 10 2016 22:56
@(non-spamming)all: Good night!