esp8266/Arduino

Arduino IDE for ESP8266

Luc

@luc-github

Update Start: ip:192.168.0.101, port:48266, size:346928
Staged: address:0x002AB000, size:0x00054B30
Update Success
Rebooting...

the 4 should not be there - right ?

Me No Dev

@me-no-dev

right

by default the python script should select port 8266 I think

you can check the source

Luc

@luc-github

I relied on output - will check the typo issue - thanks

Luc

@luc-github

yes 8266 in script and working - and not typo issues but may be misunderstanding from me
script has both

serverPort = 48266
server_address = ('0.0.0.0', serverPort)

and remote_address = (remoteAddr, 8266)

so it is confusing

Me No Dev

@me-no-dev

ok so this is how OTA goes

the computer sends ping to the ESP to tell it thata there is an update

that happens on port 8266 on the ESP

then the ESP calls bac the PC at port 48266 to get the update

Luc

@luc-github

thank you

Me No Dev

@me-no-dev

no probs :) seems I have forgotten how it worked

Luc

@luc-github

:smile:

sticilface

@sticilface

I need some help to get OTA working without 1) disabling firewall 2) putting my own delay in the reply, to give me enough time to click allow.. I'm using mac, el cap.

I have code signed everything on my computer. python, the arduino IDE, the ota script. in every case the output from codesign -dvvv is this

Executable=/Users/amelvin/Arduino/esp8266/tools/espota.py
Identifier=espota
Format=generic
CodeDirectory v=20100 size=115 flags=x0(none) hashes=1+2 location=embedded
Hash type=sha1 size=20
CDHash=c6c79c6ddb2ddc59f050130c279bff6e82f63da7
Signature size=1501
Authority=mycodesigning
Signed Time=3 Nov 2015, 14:28:47
Info.plist=not bound
TeamIdentifier=not set
Sealed Resources=none
Internal requirements count=2 size=136

none of it makes any difference. the cert mycodesigning is trusted for everything. i've restarted my machine.. from what i can see this should work...

brutzler

@brutzler

Hi, can anybody help me? Looking for the "DNS_SD_Arduino_OTA"-Sketch since several hours. Looks like I am too stupid for the www.....

brutzler

@brutzler

Oh dear.... forget it. Changing the board to an ESP.... and viola.... ESP8266mDNS is appearing. Sometimes it is so hopeless with me.

onkelfunny

@onkelfunny

Hello. Where is the correct directory for the esp8266fs.jar on os x? I put it to HOME/Documents/Arduino/tools but without luck

Ivan Grokhotkov

@igrr

I have this esp8266fs.jar in ~/Documents/Arduino/tools/ESP8266FS/tool/esp8266fs.jar

This is mentioned in reference:

Unpack the tool into `tools` directory (the path will look like `<home_dir>/Arduino/tools/ESP8266FS/tool/esp8266fs.jar`)

kathir1951

@kathir1951

hi to all .I urgently need help .I was porting esphttpd projrct using sdk to Arduino IDE USING native C code of ESP8266 .I want to upload webpage.espfs at location 0x12000. Since Arduino uploads single bin file at location 0x00000.i cannot upload weppage.espfs at location 0x1200 . Can any one guide me how to spilit single arduino bin one at location 0x00000 and another at 0x40000 using changes in platform.text Pl suggest and method to change

onkelfunny

@onkelfunny

@igrr thanks now it works

but

/code
[SPIFFS] data : /Users/waldemar/Documents/Arduino/WordClock/data
[SPIFFS] size : 3052
[SPIFFS] page : 256
[SPIFFS] block : 8192
/data.img
[SPIFFS] upload : /var/folders/_n/sy8p0xjs0dlffvp139xmn9qm0000gn/T/build7861671219293661246.tmp/WordClock.spiffs.bin
[SPIFFS] reset : nodemcu
[SPIFFS] port : /dev/cu.SLAB_USBtoUART
[SPIFFS] speed : 115200
[SPIFFS] address: 0x100000

Uploading 3125248 bytes from /var/folders/_n/sy8p0xjs0dlffvp139xmn9qm0000gn/T/build7861671219293661246.tmp/WordClock.spiffs.bin to flash at 0x00100000
warning: espcomm_send_command: didn't receive command response
warning: espcomm_send_command(FLASH_DOWNLOAD_BEGIN) failed
SPIFFS Upload failed!

Ivan Grokhotkov

@igrr

@kathir1951 you need a bit more than just changes to platform.txt.
Linker scripts have to be changed as well

I think it might be easier to place this weppage.espfs into a different location

i.e. into the space reserved for SPIFFS

@onkelfunny does this happen every time? I get this FLASH_DOWNLOAD_BEGIN failed error once in a while, but usually giving it another attempt helps

that's using nodemcu on OS X as well

kathir1951

@kathir1951

@igrr yes possible then i have to change libhttpd.a can you give the location reserved for SPIFS

onkelfunny

@onkelfunny

yes every time. i also tried the manual boot loader mode

Ivan Grokhotkov

@igrr

@kathir1951 depends on the flash size you choose in Arduino Tools menu.

see linker scripts here: https://github.com/esp8266/Arduino/tree/master/tools/sdk/ld

kathir1951

@kathir1951

@igrr some clues for reserved location

Ivan Grokhotkov

@igrr

for 4 Mbyte flash you dive into https://github.com/esp8266/Arduino/blob/master/tools/sdk/ld/eagle.flash.4m.ld and see

PROVIDE ( _SPIFFS_start = 0x40300000 );
PROVIDE ( _SPIFFS_end = 0x405FB000 );

for 512k (64 k SPIFFS) option you open https://github.com/esp8266/Arduino/blob/master/tools/sdk/ld/eagle.flash.512k64.ld and see

PROVIDE ( _SPIFFS_start = 0x4026B000 );
PROVIDE ( _SPIFFS_end = 0x4027B000 );

flash is memory mapped at 0x40200000, so to get flash offset you need to subtract that number

i.e. 0x6b000 — 0x7b000 for 512k option and 0x100000 — 0x3fb000 for 4m option

@onkelfunny let's try increasing flash erase timeout

could you build esptool from source or is it too much to ask?

if not, i'll build it for you and send you a binary :)

kathir1951

@kathir1951

@igrr Thanks

onkelfunny

@onkelfunny

@igrr i set the spiffs to 1M and the upload works

Ivan Grokhotkov

@igrr

yes then it's related to flash erase time for sure.

onkelfunny

@onkelfunny

i try to compile it

Where communities thrive

People

Repo info

Activity