Where communities thrive


  • Join over 1.5M+ people
  • Join over 100K+ communities
  • Free without limits
  • Create your own community
People
Repo info
Activity
geman220
@geman220
Unless by some miracle 180 degrees is enough
Michael Miller
@Makuna
@geman220 well, close to correct. More precisely, if a servo with internal sensor does not support the range of motion you need, then you will need external sensors. There are servos that do extended ranges and often most will do 200 degrees. To use them, you will need to then use the writeMicroseconds() method instead. The servo library is written to compatible with the normal Arduino library, so you can use their docs for reference.
geman220
@geman220
Oh well that makes me feel much better =]. I'll probably look into getting servos that go up to 200 and use the method you mentioned.
Michael Miller
@Makuna
@geman220 Yours may already go to 200, try them with the writeMicroseconds() first.
geman220
@geman220
@Makuna so instead of myservo.write(180); do myservo.writeMicroseconds(200);
I just looked my servo up it moves 180
Stavros Korokithakis
@skorokithakis
so i want to make this boilerplate framework for the ESP and i need a place to put my settings
what's a good place for that? something like settings.h?
i'm afraid my C knowledge isn't great
Stavros Korokithakis
@skorokithakis
can i #ifdef an include?
Michael Miller
@Makuna

@geman220 Review the Arduino Servo Reference. you are setting the microseconds, not angle. These are the helpful values ...

#define MIN_PULSE_WIDTH       544     // the shortest pulse sent to a servo  
#define MAX_PULSE_WIDTH      2400     // the longest pulse sent to a servo 
#define DEFAULT_PULSE_WIDTH  1500     // default pulse width when servo is attached

When you "attach" the Servo, you can provide your own min and max like

Servo.attach(pin, 500, 2500); // use an extended range
Keith Andrew Hill
@vic10us
Anyone know a good place to get nema 17/23 steppers in or around Montreal?
Jeeth Suresh
@jeethsuresh
hey guys! quick question - in the ESP8266WiFi class the object WiFi is defined externally
where is that defined?
Martin Ayotte
@martinayotte
in 2.2.0/libraries/ESP8266WiFi/ ...
Jeeth Suresh
@jeethsuresh
right, but if I wanted to dynamically assign channels to the SoftAP when I'm generating it for my mesh network, where would I go to change the code to let me do that? Or am I thinking of this wrong?
Markus
@Links2004

there is a parameter for it.

bool softAP(const char* ssid, const char* passphrase = NULL, int channel = 1, int ssid_hidden = 0);

https://github.com/esp8266/Arduino/blob/master/libraries/ESP8266WiFi/src/ESP8266WiFiAP.h#L39
note: the Parameter may by overriden when you use the STA mode too the ESP can only work on one channel and STA mode has priority.

Lars Englund
@larsenglund
@jeethsuresh is your mesh network code on github?
Does anyone else know of a mesh library for esp arduino?
Nagy Attila Gábor
@mrbig
Hello all, I've been trying to make the EventManager (https://github.com/igormiktor/arduino-EventManager ) run on esp8266 arduino core. Since I have to #ifdef some parts of the code, I wonder if there is any predefined macro I could use to detect the presence of the arduino-core. Currently I'm using ESP_H, but that just doesn't seem to be right.
Me No Dev
@me-no-dev

ifdef ESP8266

Nagy Attila Gábor
@mrbig
I've possibly overlooked this. Thanks!
fabiangl
@fabiangl
Take a look of this: https://github.com/Makuna/Task
Stavros Korokithakis
@skorokithakis
does anyone know how i can connect this to my ESP? i'm a bit lost :/ http://www.ebay.com/itm/281776665478?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
Me No Dev
@me-no-dev
you use the serial port to connect to it
Stavros Korokithakis
@skorokithakis
just tx/rx?
Me No Dev
@me-no-dev
and GND yes
might need the reset to make sure the module is init at sketch boot
Stavros Korokithakis
@skorokithakis
hmm, the reset is solder-on, there's no pin
i might just solder one there
there's 5VT/5VR/3VT/3VR/VCC/GND and then something that says DB9-2/DB9-3/GND
the DB-stuff seems to be serial
but the 3VT/3VR also seems to be serial
so confusing
Me No Dev
@me-no-dev
the chip by spec does not tollerate 3.3V logic
though I have found it working fine
Stavros Korokithakis
@skorokithakis
this shield claims to have a 3V logic level pin
Me No Dev
@me-no-dev
so they have a convertor there to be able to work on 5V
Stavros Korokithakis
@skorokithakis
so that should work, at least
right
looks like an FTDI cable will work as well
Michael Miller
@Makuna
@mrbig @me-no-dev The official one I thought should be ARDUINO_ARCH_ESP8266 and not ESP8266.
Stavros Korokithakis
@skorokithakis
does anyone know of anything like a microusb to power cable?
tzapu
@tzapu
or a tiny usb power source? similar to the apple watch one for instance? :P just tagging along your question @skorokithakis
Stavros Korokithakis
@skorokithakis
@tzapu what does that one look like?
but EU i d preffer :P