Where communities thrive


  • Join over 1.5M+ people
  • Join over 100K+ communities
  • Free without limits
  • Create your own community
People
Repo info
Activity
Drzony
@drzony
on ESP one https request takes about 3 seconds
(client one)
the server one will probably be even longer
https = http inside SSL, so it cannot be faster
Drzony
@drzony
@earlephilhower Either way I don't think that @hasenradball really needs https
Considering that most browsers will give warnings about self-signed certificates
and all the fuss with setting up https
Hasenradball
@hasenradball
Thanks for the Info I will have a look at the https examples, but if its not faster than http it is not an benefit for me. :-)
Earle F. Philhower, III
@earlephilhower
HTTP's auth is insanely insecure (plaintext b64!) so using TLS to protect that is generally a good practice (but slow on the 8266). But yes, there's no way to keep the browser itself from knowing the password...that's just kind of silly. Anyway, the examples do show both methods so he should be able to choose accordingly. Good luck!
Hasenradball
@hasenradball
:-)
Drzony
@drzony
@earlephilhower If it's only required for sending passwords, then I would go with encrypting it in JS with some master password. Using TLS without validating server cert (i.e. clicking through self signed warning) is also insecure (third party can trick you into entering password on their server)
Hasenradball
@hasenradball
Hello is it possible to send a post request to the ESP8266Webserver with json-formatted data or has the data always be in the type of x-www-form-urlencoded?
2 replies
Chris Dalby
@moose4621

Hoping for some knowledge from the brains trust here. I have been battling with a problem with the Arduino IDE for several weeks where I cannot upload to a Wemos D1 mini via the usb port, on all three computers, all running Ubuntu 20.04, Arduino 1.8.13, and esp core 3.0.2 but also tried 3.0.0 and 2.7.4 from GitHub.
I have been playing with the Wemos D1 mini's for a few years now and are usually having no trouble uploading via USB. I can upload to AVR boards via USB without problem. It seems specific to the esp8266 based boards.
The fault I get in Arduino is as follows:

Arduino: 1.8.13 (Linux), Board: "LOLIN(WEMOS) D1 R2 & mini, 80 MHz, Flash, Disabled (new aborts on oom), Disabled, All SSL ciphers (most compatible), 32KB cache + 32KB IRAM (balanced), Use pgm_read macros for IRAM/PROGMEM, 4MB (FS:1MB OTA:~1019KB), v2 Lower Memory, Disabled, None, Only Sketch, 115200"

Executable segment sizes:
ICACHE : 32768           - flash instruction cache 
IROM   : 355044          - code in flash         (default or ICACHE_FLASH_ATTR) 
IRAM   : 29385   / 32768 - code in IRAM          (IRAM_ATTR, ISRs...) 
DATA   : 1524  )         - initialized variables (global, static) in RAM/HEAP 
RODATA : 2736  ) / 81920 - constants             (global, static) in RAM/HEAP 
BSS    : 28368 )         - zeroed variables      (global, static) in RAM/HEAP 
Sketch uses 388689 bytes (37%) of program storage space. Maximum is 1044464 bytes.
Global variables use 32628 bytes (39%) of dynamic memory, leaving 49292 bytes for local variables. Maximum is 81920 bytes.
esptool.py v3.0
Serial port /dev/ttyUSB0
Connecting........_____....._____....._____....._____....._____....._____....._____
Traceback (most recent call last):
  File "/home/chris/arduino-1.8.13/hardware/esp8266com/esp8266/tools/upload.py", line 66, in <module>
    esptool.main(cmdline)
  File "/home/chris/arduino-1.8.13/hardware/esp8266com/esp8266/tools/esptool/esptool.py", line 3552, in main
    esp.connect(args.before, args.connect_attempts)
  File "/home/chris/arduino-1.8.13/hardware/esp8266com/esp8266/tools/esptool/esptool.py", line 529, in connect
    raise FatalError('Failed to connect to %s: %s' % (self.CHIP_NAME, last_error))
esptool.FatalError: Failed to connect to ESP8266: Timed out waiting for packet header
esptool.FatalError: Failed to connect to ESP8266: Timed out waiting for packet header



This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.

It looks like a Python fault, but thats ...errrr.... above my pay grade. ;-)

This is what's weird. If I run a VM Win7 from within the same Ubuntu 20.04, I can upload via USB no problem from the windoze Arduino ide which is running in the VM on the Ubuntu host.

No doubt someone is looking at this and slapping their forehead while muttering "why doesn't he just do ??this", but the solution is not obvious to me. Any help would be appreciated.

Sorry 'bout the formatting.
Chris Dalby
@moose4621

In addition, I have two versions of Python installed.

chris@chris-Inspiron-5593:~$ python -V
Python 2.7.18
chris@chris-Inspiron-5593:~$ python3 -V
Python 3.8.10

Apparently it is most unwise to uninstall the distro's default Python 2.7.x.

d-a-v
@d-a-v:matrix.org
[m]
This issue is coming from esptool. You can get your sketch's binary file (from /tmp/arduino_build_nnnn) and try to flash it with esptool:
esptool.py --chip esp8266 --port /dev/ttyUSB0 --baud 115200 --trace write_flash 0x0 sketch.bin
Chris Dalby
@moose4621
Thanks for the suggestion @d-a-v:matrix.org .
Unfortunately
A fatal error occurred: Failed to connect to ESP8266: Timed out waiting for packet header
Seems esptool or Python is the issue.
Earle F. Philhower, III
@earlephilhower:matrix.org
[m]
Check your kernel version. There was a regression in a late model Linux kernel in a USB-to-serial driver that made it incompatible with the way ESPtool uses it.
Fixed in linux mainline, no idea if it's fixed in Ubuntu kernels yet
Chris Dalby
@moose4621
@earlephilhower:matrix.org Well spotted. I will check that out. Sounds like my problem.
Chris Dalby
@moose4621
@earlephilhower:matrix.org That helped a lot. Thank you. Seems 5.4.0-89 and 5.4.0-88 are both affected. The only other kernel I have loaded is 5.3.0-050300-generic which cured the fault.
So deciding if I go further an load other kernels looking for the point of failure or just sit on 5.3.0 and wait for an update.
Chris Dalby
@moose4621
5.15.0-051500-generic kernel now installed. All good except....
I cannot see the OTA ports in the ide now.
Jeroen88
@Jeroen88
@earlephilhower:matrix.org I have ported the BearSSL library to the ESP32 and I am currently working on a generic Client that takes another Client as parameter in it's constructor and adds TLS to it. probeMaxFragmentLength() is already working, dynamically creating the IO buffers, as is setting certificates as TAs. Also I think I can get setInsecure() and fingerprints going. However, allowSelfSignedCerts() will be difficult. But what is the real reason for this method? It is almost the same as setInsecure() apart from checking a self signed cert. But if someone wants to spoof the server, adding a self signed cert is very easy. What is the added value of checking self signed certificates?
Earle F. Philhower, III
@earlephilhower:matrix.org
[m]
@Jeroen88: That's a good question. This method was added to support axTLS backwards compatibility. I would not add it to a new port. There really is no added security with it.
Jeroen88
@Jeroen88
Thnx @earlephilhower:matrix.org !
Clemens Kirchgatterer
@everslick
bearssl on esp32 sounds very cool! I'm looking forward giving it a try.
Shelby Merrick
@forkineye
@d-a-v:matrix.org I noticed LWIP 2.1.3 was released recently - https://lists.nongnu.org/archive/html/lwip-users/2021-11/msg00001.html. Are you all planning to pull it into the core?
d-a-v
@d-a-v:matrix.org
[m]
Yes
Paulo Cabral Sanz
@paulocsanz
Hi, I'm on master and am getting a Software WDT Reset on this line https://github.com/esp8266/Arduino/blob/master/libraries/ESP8266WiFi/src/ESP8266WiFiGeneric.cpp#L626, would there be anything on my side that could cause this? or it's probably a bug?
0x4021f788 in __esp_delay at /home/no/.platformio/packages/framework-arduinoespressif8266/cores/esp8266/core_esp8266_main.cpp:152
0x4021f7e1 in esp_try_delay(unsigned int, unsigned int, unsigned int) at /home/no/.platformio/packages/framework-arduinoespressif8266/cores/esp8266/core_esp8266_main.cpp:171
0x40214cac in esp_delay<ESP8266WiFiGenericClass::hostByName(char const*, IPAddress&, uint32_t)::<lambda()> > at /home/no/.platformio/packages/framework-arduinoespressif8266/cores/esp8266/coredecls.h:66
 (inlined by) ESP8266WiFiGenericClass::hostByName(char const*, IPAddress&, unsigned int) at /home/no/.platformio/packages/framework-arduinoespressif8266/libraries/ESP8266WiFi/src/ESP8266WiFiGeneric.cpp:628
1 reply
Hasenradball
@hasenradball
Hi together,
Is it necessary on the ESP8266 to set the pinMode(A0, INPUT), when using the analogRead(A0) function?
2 replies
Hasenradball
@hasenradball
Does anybody know if I can also use Google test in PIO with the ESP8266 core, or doe i have to use the Unit test with ist provieded by PIO?
1 reply
Hasenradball
@hasenradball
Hi guys, is there an wax to query the actual rf_mode?
WAKE_RF_DEFAULT, WAKE_RFCAL, WAKE_NO_RFCAL, WAKE_RF_DISABLED. (GPIO16 needs to be tied to RST to wake from deepSleep.) 
The chip can sleep for at most ESP.deepSleepMax() microseconds.
If you implement deep sleep with WAKE_RF_DISABLED and require WiFi functionality on wake up, 
you will need to implement an additional WAKE_RF_DEFAULT before WiFi functionality is available.
Hasenradball
@hasenradball
My question corresponds to this in the documentation:
grafik.png
If I can set the RF_MODE is there a possibility to check it after boot?
Jonathan Dumaresq
@dumarjo
anyone here know if a esp8266 can connect to a wpa3 router ? I know that the wpa3 is not supported in the current arduino core, but I wonder if it should connect in wpa2 as a drawback ?
the only router wpa3 that I have don't seem to work like this.
Hasenradball
@hasenradball
Hello Can anyone give me an small hint howTo:
  • include the src files of MariaDB c connector into my PIO ESP8266 Prj?
    I think mariaDB is compiled with cmake is this a problem?
Miguel Nogueira
@MiguelNog91_twitter
hello to all a little question I can not upload on the ESP 8266 card its given that, serial.serialutil.SerialException: could not open port 'COM4': FileNotFoundError(2, 'Le fichier sp�cifi� est introuvable.', None, 2) following a search on the internet that is good for the 'COM4 port that is not installed but I do not know how to do the installation of the install you can help me thank you.
Paulo Cabral Sanz
@paulocsanz

Hi, could someone help me understand this crash please?

Exception (29):
epc1=0x402117af epc2=0x00000000 epc3=0x00000000 excvaddr=0x00000010 depc=0x00000000

StoreProhibited: A store referenced a page mapped with an attribute that does not permit stores
  epc1=0x402117af in Stream::sendGeneric(Print*, int, int, unsigned int) at ??:?

We log memory usage immediately before:
[TRACE] TRACER: Free Stack 2372, Free DRAM 31368, Biggest DRAM Block 27632, Free IRAM 20328, Connection 1

It happens when I call HttpClient::getString()

Paulo Cabral Sanz
@paulocsanz
I'm on the latest master commit because 3.2.0 doesn't compile (ceill is defined twice)
[HTTP-Client][begin] host: iop-monitor-server.tk port: 4001 url: /v1/user/login
[HTTP-Client][end] tcp is closed
[String] Reallocating large String(143 -> 155 bytes) 'Content-Ty ... K: '
[String] Reallocating large String(155 -> 175 bytes) 'Content-Ty ... C: '
[String] Reallocating large String(175 -> 219 bytes) 'Content-Ty ... NG: '
[String] Reallocating large String(219 -> 236 bytes) 'Content-Ty ... .tk:4001'
[HTTP-Client][sendRequest] type: 'POST' redirCount: 0
[HTTP-Client] connect: HTTPClient::begin was not called or returned error
[HTTP-Client][returnError] error(-1): connection failed
[DEBUG] _client.get() is nullptr
Fatal exception 29(StoreProhibitedCause):
epc1=0x4021bcb2, epc2=0x00000000, epc3=0x00000000, excvaddr=0x00000010, depc=0x00000000
It seems HttpClient::begin returns true, right after the TCP connection is closed, and then getString crashes, is there a way to catch the problem that I'm missing, or is it a bug?
Paulo Cabral Sanz
@paulocsanz
Ok it seems I can detect if connection failed, nevermind. But it still is a weird crash. Would a PR to detect that and avoid the crash be something of interest?
3 replies
Paulo Cabral Sanz
@paulocsanz
Whenever I'm using -O0 I'm consistently getting a WDT reset inside ESP8266WiFiGenericClass::hostByName from WiFiClientSecureCtx::connect("iop-monitor-server.tk", 4001)
[INFO] NETWORK: Free Stack 724, Free DRAM 36672, Biggest DRAM Block 35784, Free IRAM 36672, Connection 1
[hostByName] request IP for: iop-monitor-server.tk

--------------- CUT HERE FOR EXCEPTION DECODER ---------------

Soft WDT reset

>>>stack>>>

ctx: sys
sp: 3ffff0d0 end: 3fffffb0 offset: 01a0
...

0x4022126c in __esp_delay at /home/no/.platformio/packages/framework-arduinoespressif8266@src-9e6d7244c46d325024685829a1341b58/cores/esp8266/core_esp8266_main.cpp:152
0x402212c5 in esp_try_delay(unsigned int, unsigned int, unsigned int) at /home/no/.platformio/packages/framework-arduinoespressif8266@src-9e6d7244c46d325024685829a1341b58/cores/esp8266/core_esp8266_main.cpp:171
0x40214288 in esp_delay<ESP8266WiFiGenericClass::hostByName(char const*, IPAddress&, uint32_t)::<lambda()> > at /home/no/.platformio/packages/framework-arduinoespressif8266@src-9e6d7244c46d325024685829a1341b58/cores/esp8266/coredecls.h:66
 (inlined by) ESP8266WiFiGenericClass::hostByName(char const*, IPAddress&, unsigned int) at /home/no/.platformio/packages/framework-arduinoespressif8266@src-9e6d7244c46d325024685829a1341b58/libraries/ESP8266WiFi/src/ESP8266WiFiGeneric.cpp:626
0x40204f76 in iop::logMemory(iop::Log const&) at src/core/log.cpp:253
0x40101354 in check_poison_block at /home/no/.platformio/packages/framework-arduinoespressif8266@src-9e6d7244c46d325024685829a1341b58/cores/esp8266/umm_malloc/umm_poison.c:96
0x40214308 in ESP8266WiFiGenericClass::hostByName(char const*, IPAddress&) at /home/no/.platformio/packages/framework-arduinoespressif8266@src-9e6d7244c46d325024685829a1341b58/libraries/ESP8266WiFi/src/ESP8266WiFiGeneric.cpp:598
0x40217df0 in BearSSL::WiFiClientSecureCtx::connect(char const*, unsigned short) at /home/no/.platformio/packages/framework-arduinoespressif8266@src-9e6d7244c46d325024685829a1341b58/libraries/ESP8266WiFi/src/WiFiClientSecureBearSSL.cpp:222
0x401010d0 in put_poison at /home/no/.platformio/packages/framework-arduinoespressif8266@src-9e6d7244c46d325024685829a1341b58/cores/esp8266/umm_malloc/umm_poison.c:37
0x40224ff8 in std::_Function_base::~_Function_base() at ??:?
0x4029a130 in system_get_sdk_version at ??:?
0x402095ed in driver::HTTPClient::begin(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >) at src/driver/client.cpp:161
0x40100b30 in heap_pvPortMalloc at /home/no/.platformio/packages/framework-arduinoespressif8266@src-9e6d7244c46d325024685829a1341b58/cores/esp8266/heap.cpp:278
0x40220034 in String::init() at /home/no/.platformio/packages/framework-arduinoespressif8266@src-9e6d7244c46d325024685829a1341b58/cores/esp8266/WString.h:283
 (inlined by) String::String() at /home/no/.platformio/packages/framework-arduinoespressif8266@src-9e6d7244c46d325024685829a1341b58/cores/esp8266/WString.h:55
 (inlined by) operator+(String&&, String&&) at /home/no/.platformio/packages/framework-arduinoespressif8266@src-9e6d7244c46d325024685829a1341b58/cores/esp8266/WString.cpp:453
0x4022dfbf in std::__cxx11::basic_string<char, std::char_traits<char>
Does that make any sense?