root@AbhinavPC-10:/mnt/d/EspruinoProject/Espruino-1# which nrfutil /usr/local/bin/nrfutil root@AbhinavPC-10:/mnt/d/EspruinoProject/Espruino-1# which adafruit-nrfutil /usr/local/bin/adafruit-nrfutil root@AbhinavPC-10:/mnt/d/EspruinoProject/Espruino-1# nrfutil version adafruit-nrfutil version 0.5.3.post16 root@AbhinavPC-10:/mnt/d/EspruinoProject/Espruino-1# adafruit-nrfutil version adafruit-nrfutil version 0.5.3.post16 root@AbhinavPC-10:/mnt/d/EspruinoProject/Espruino-1#
GEN espruino_2v07.9_sparkfun.hex Creating DFU ZIP # nrfutil pkg generate --help nrfutil pkg generate espruino_2v07.9_sparkfun.zip --application espruino_2v07.9_sparkfun_app.hex --application-version 0xff --hw-version 52 --sd-req 0x8C --key-file targets/nrf5x_dfu/dfu_private_key.pem Usage: nrfutil [OPTIONS] COMMAND [ARGS]... Try "nrfutil --help" for help. Error: No such command "pkg". make: *** [make/common/NRF5X.make:453: espruino_2v07.9_sparkfun.zip] Error 2
hi, I've compiled an espruino for the id205 (it still exists in the original espruino repo). I had to change a few things to build. I think these are not critical things, at least enough to prevent the watch from booting. It shows
and always resets. Any ideas?
I am connecting my ESP8266-01 to my computer using a USB to FTDI adapter. However, when I connect it to the console, it does not respond to any AT commands. Only when I reset it using its pin with the console set at 74880 baud, it prints the following message:
ets Jan 8 2013,rst cause:2, boot mode:(3,6) load 0x40100000, len 31320, room 16 tail 8 chksum 0xef load 0x00000000, len 0, room 0 tail 0 chksum 0xef load 0x00000000, len 0, room 8 tail 0 chksum 0xef csum 0xef csum err ets_main.c
What should I do?
I have already flashed it several times, and I believe I have done it correctly. Check this forum to see my previous attemps, please.