Where communities thrive


  • Join over 1.5M+ people
  • Join over 100K+ communities
  • Free without limits
  • Create your own community
People
Activity
    Kiran Shila
    @kiranshila
    Our main.js is 879.714K
    Yeah ok so we need 1M, but I didn't know what of those partitions was safe to take space away from

    +js_code,data,0,0x2C0000,1024K
    +storage,data,0,0x3C0000,256K

    Right so you'll notice the addrs of those partitions have changed

    Mark Becker
    @MaBecker
    mom
    Mark Becker
    @MaBecker
    firmware was growing
    this is the old one https://github.com/espruino/Espruino/blob/master/targets/esp32/Changes_V3.1/partitions_espruino.csv
    this a actual one: https://github.com/espruino/EspruinoBuildTools/blob/b57983a0bb17ace371462bd924c8761ccdc49ac1/esp32/build/app/partitions_espruino.csv
    Kiran Shila
    @kiranshila
    Right, so I assume we need that 1536K instead of the 1344K
    As in, the size of the interpreter for the ESP32 grew
    Mark Becker
    @MaBecker
    yep
    Kiran Shila
    @kiranshila
    Is the ota_0 partition even being used on the ESP32? I thought I read somewhere OTA firmware updates don't work
    *on the ESP32
    Mark Becker
    @MaBecker
    There is no fota implemented jet, but who knows
    just created a pr to sync partitions_espruino.csv
    save code address is set in board file too https://github.com/espruino/Espruino/blob/master/boards/ESP32.py#L61
    Kiran Shila
    @kiranshila
    Why is the partition table in two places? Is The firmware built with the one from EspruinoBuildTools or from Espruino?
    Mark Becker
    @MaBecker
    Well, this folder is not use for build, it's just for info https://github.com/espruino/Espruino/tree/master/targets/esp32/Changes_V3.1
    Kiran Shila
    @kiranshila
    Oh gotchya
    I wonder if it would work if I remove the ota partition
    Mark Becker
    @MaBecker
    so as you stumbled over it, I thought it's time to update it.
    Kiran Shila
    @kiranshila
    Yeah of course
    Like I said, the real solution is to utilize all of the RAM, 8M in my case, versus the 4M allocated here
    Mark Becker
    @MaBecker
    the .csv is used to build the .bin file and that one is flashed
    Kiran Shila
    @kiranshila
    The one from EspruinoBuildTools?
    Mark Becker
    @MaBecker
    yep
    Kiran Shila
    @kiranshila
    Ok yeah that's what I thought
    Mark Becker
    @MaBecker
    As far as I can see Mike was using a Espruino before the partition was changed
    So it looks like Mike is using Espruino without contributing to the ESP32 firmware, hope he donated to Gordon
    Mark Becker
    @MaBecker
    @kiranshila did you managed to flash the firmware?
    Kiran Shila
    @kiranshila
    Using my modified partition table or the stock firmware?

    So it looks like Mike is using Espruino without contributing to the ESP32 firmware, hope he donated to Gordon

    Can't speak for him, but I'll donate. This is a pretty neat project and it would be even better if it ran ClojureScript :)

    Kiran Shila
    @kiranshila
    @MaBecker Is the bootloader.bin the normal bootloader from esp-idf or has it been customized for Espruino - I can't quite tell reading the makefiles
    Mark Becker
    @MaBecker
    yes, https://github.com/espruino/Espruino/blob/master/make/targets/ESP32.make#L21
    Suman
    @WahengbamSumanSingh
    image.png
    hi i got error while uploading
    i try every method, holding boot, holding reset or both
    Ákos Lukács
    @AkosLukacs
    Either the ESP32 is not on COM7, or something else is using COM7. Or even your board might be damaged. What happens if you just connect to COM7 via a terminal app? Do you see the esp's boot messages? BTW that looks like an error from arduino ide, this might not be the best place for arduino advice.
    Suman
    @WahengbamSumanSingh

    when i press boot button i got this rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
    configsip: 0, SPIWP:0xee
    clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
    mode:DIO, clock div:2
    load:0x3fff0018,len:4
    load:0x3fff001c,len:5656
    load:0x40078000,len:0
    ho 12 tail 0 room 4
    load:0x40078000,len:13844
    entry 0x40078fc4
    I (31) boot: ESP-IDF v3.0.7 2nd stage bootloader
    I (31) boot: compile time 09:04:31
    I (31) boot: Enabling RNG early entropy source...
    I (35) boot: SPI Speed : 40MHz
    I (39) boot: SPI Mode : DIO
    I (43) boot: SPI Flash Size : 4MB
    I (47) boot: Partition Table:
    I (51) boot: ## Label Usage Type ST Offset Length
    I (58) boot: 0 phy_init RF data 01 01 0000f000 00001000
    I (66) boot: 1 otadata OTA data 01 00 00010000 00002000
    I (73) boot: 2 nvs WiFi data 01 02 00012000 0000e000
    I (81) boot: 3 at_customize unknown 40 00 00020000 000e0000
    I (88) boot: 4 ota_0 OTA app 00 10 00100000 00180000
    I (96) boot: 5 ota_1 OTA app 00 11 00280000 00180000
    I (103) boot: End of partition table
    I (107) boot: No factory image, trying OTA 0
    I (112) esp_image: segment 0: paddr=0x00100020 vaddr=0x3f400020 size=0x20614 (132628) map
    I (168) esp_image: segment 1: paddr=0x0012063c vaddr=0x3ffc0000 size=0x02d7c ( 11644) load
    I (173) esp_image: segment 2: paddr=0x001233c0 vaddr=0x40080000 size=0x00400 ( 1024) load
    I (175) esp_image: segment 3: paddr=0x001237c8 vaddr=0x40080400 size=0x0c848 ( 51272) load
    I (205) esp_image: segment 4: paddr=0x00130018 vaddr=0x400d0018 size=0xdfc80 (916608) map
    I (526) esp_image: segment 5: paddr=0x0020fca0 vaddr=0x4008cc48 size=0x02504 ( 9476) load
    I (530) esp_image: segment 6: paddr=0x002121ac vaddr=0x400c0000 size=0x00064 ( 100) load
    I (542) boot: Loaded app from partition at offset 0x100000
    I (542) boot: Disabling RNG early entropy source...
    1.1.3

    I (590) wifi: wifi firmware version: 703e53b
    I (590) wifi: config NVS flash: enabled
    I (590) wifi: config nano formating: disabled
    I (600) wifi: Init dynamic tx buffer num: 32
    I (601) wifi: Init data frame dynamic rx buffer num: 32
    I (601) wifi: Init management frame dynamic rx buffer num: 32
    I (606) wifi: wifi driver task: 3ffdeeb8, prio:23, stack:3584
    I (611) wifi: Init static rx buffer num: 10
    I (615) wifi: Init dynamic rx buffer num: 32
    I (619) wifi: wifi power manager task: 0x3ffe369c prio: 21 stack: 2560
    I (656) wifi: mode : softAP (3c:71:bf:79:32:e1)
    I (663) wifi: mode : sta (3c:71:bf:79:32:e0) + softAP (3c:71:bf:79:32:e1)
    I (667) wifi: mode : softAP (3c:71:bf:79:32:e1)
    I (672) wifi: set country: cc=CN

    and when i press both boot and reset and released reset button i got this
    rst:0x1 (POWERON_RESET),boot:0x3 (DOWNLOAD_BOOT(UART0/UART1/SDIO_REI_REO_V2))
    waiting for download
    Ákos Lukács
    @AkosLukacs
    So it's working, try uploading now. But on most boards reset and going to bootloader is automatic...
    OnurNP
    @K0rkunc
    hi
    im using esp32 s2
    i can connect wifi and enter https sites
    but i cant enter https sites
    google sheets or etc..
    how to fix that
    Ákos Lukács
    @AkosLukacs
    Espruino runs on ESP32 S2? Some code and the error messages would be helpful. Without those we can't help you
    Mark Becker
    @MaBecker
    @K0rkunc better place your issue on the forum in ESP32 section http://forum.espruino.com/microcosms/1086/
    OnurNP
    @K0rkunc
    mmm okey
    thnk u

    Espruino runs on ESP32 S2? Some code and the error messages would be helpful. Without those we can't help you

    error code -1

    Tushar Yadav
    @tushar8727_twitter
    How we can check my router has internet access Or not using esp?
    Ákos Lukács
    @AkosLukacs
    Just use ping maybe?