Where communities thrive


  • Join over 1.5M+ people
  • Join over 100K+ communities
  • Free without limits
  • Create your own community
People
Repo info
Activity
Bill Martin
@justbill2020
Yes
Bearclay
@Bearclay
@justbill2020 Thanks, do you have any recommendations for the PIR?
Bill Martin
@justbill2020
Pi requires a micro sd card and you need the reader so you can write raspbian to the card
EMY 5 X HC-SR501 Adjust Ir Pyroelectric Infrared PIR Motion Sensor Detector Modules https://www.amazon.com/dp/B00FDPO9B8/ref=cm_sw_r_cp_api_zJwAybMFAR6GM
Bearclay
@Bearclay
@justbill2020 OK, for the eye is it just plugged in inside the cabinet?
@justbill2020 Thank you!
Bill Martin
@justbill2020
I don't do it with that cabinet
I think @Fijvect disassembled the eye and mounted it
They are cheap order 2 eyes
Bearclay
@Bearclay
@justbill2020 alright, but it should still work with that cabinet?
Bill Martin
@justbill2020
One for backup in case disassembly goes bad on your first attempt
It should
Use that assembly as a guide not a step by step... the rest is a step by step though
Bearclay
@Bearclay
@justbill2020 Would it be possible to mount that eye and skype/video chat from this mirror?
Bill Martin
@justbill2020
No the eye isn't truly a webcam
Bearclay
@Bearclay
ok
Bill Martin
@justbill2020
And the task of adding Skype would be a chore in itself
Bearclay
@Bearclay
Right I figured
Bearclay
@Bearclay
Did anyone here use that same cabinet but with a different monitor? The guide the monitor made it tight
Bearclay
@Bearclay
*the guide said the monitor made it tight.
Donavin Northrup
@dnorthrupva
I made my own frame on that one, so can't help @Bearclay
Sekisback
@Sekisback
Hey @all I have a problem, it looks that the voice control is working, I can say "smart mirror - was kann ich sagen" but then only a white line in the bottom appears. The forecast is working and the google calendar too, the only thing is that the calendar display the text in english not in german "Today - Heute". Can someone help with the voice control?
derweba
@derweba
Have you enabled billing of the voice recognition?
Bill Martin
@justbill2020
@Sekisback have you enabled billing as @derweba has already asked? and have you specified your locale in the config.js? for german in germany it should be "de-de"
cwelinder
@cwelinder
I'm trying to figure out the steps needed for using Swedish speech, if possible at all. The post at stackoverflow list sv-SE as ok.
Bill Martin
@justbill2020
while that's true you would have to translate the en.json in the local folder to swedish...
cwelinder
@cwelinder
@justbill2020 I have done that.
Bill Martin
@justbill2020
ok what did you name that file?
cwelinder
@cwelinder
sv.json
Bill Martin
@justbill2020
sv.json?
cool
did you change the locale in the config.js?
cwelinder
@cwelinder
Yes
Bill Martin
@justbill2020
thats all you should have to do
are you getting any errors when you start smart-mirror in dev mode npm start dev?
cwelinder
@cwelinder
I got no response. Will it help if I run in dev mode and/or check logs for result?
I will try that later tonight!
Bill Martin
@justbill2020
did you follow all the voice and sound configuration steps?
cwelinder
@cwelinder
Yes, and it works great with english.
So there is nothing I need to change server/api-side?
I'll try dev and report back later on!
Bill Martin
@justbill2020
no the local will just work
Bill Martin
@justbill2020
@evancohen am I missing anything?
Evan Cohen
@evancohen
sv-SE should with for streaming speech
But @cwelinder you should double check the Google speech documentation
Bill Martin
@justbill2020
@cwelinder check out here... https://cloud.google.com/speech/docs/languages
cwelinder
@cwelinder
@evancohen I read some docs over there, and it's not that very clear. Some instructions about configuring the speech engine, but no further info.
Going to try with dev and see what I get.
Evan Cohen
@evancohen

Hey @/all

Happy 2017

Thank you to everyone who has contributed to the holiday update (especially @justbill2020).
There are a lot of awesome changes coming in #500. In order to better serve the community we're moving over to Discord!

This invite link will allow you to join our new channel: https://discord.gg/EMb4ynW

Important: As of this moment the gitter chat will no longer be monitored. Please direct all your questions to Discord.

:rocket:

Ferdi Özer
@ferdiozer
Nice
evan
@chanjungkim
Hello