Where communities thrive


  • Join over 1.5M+ people
  • Join over 100K+ communities
  • Free without limits
  • Create your own community
People
Activity
Jennifer Hillman-Jackson
@jennaj
Yes, the underlying tool needs an update or the current wrapper. The developers can decide the best path. This is the issue ticket: galaxyproject/tools-iuc#3875
Thanks Melisa!
Melisa Magallanes
@Melisa-Magallanes
@jennaj Thank you very much
taikongrenren
@taikongrenren
image.png
Hello, I meet some problem about module loading like above, need some help thanks
Björn Grüning
@bgruening
Where do you see that? Which Galaxy server? Which tool?
taikongrenren
@taikongrenren
@bgruening I installed the galaxy in the local server, I used the tool like below
image.png
MelonaT
@MelonaT
Hi, I'm trying to use a workflow I created but I always get the bug report that "The server could not complete the request. Please contact the Galaxy Team if this error persists." What can I do?
Jennifer Hillman-Jackson
@jennaj
@MelonaT Hi -- please try at least one rerun. If the same error is reported, there is likely some problem with the inputs, tool choices, or workflow design. Try opening the workflow in the editor and check for warning messages. If you cannot resolve the problem, where are you running the workflow? URL if a public server or describe otherwise. Thanks!
@taikongrenren The tool is not finding a required dependency. This can be due to several reasons. Did you install Galaxy following the instructions here, with the latest release? https://galaxyproject.org/admin/get-galaxy/ Or by some other method?
MelonaT
@MelonaT
@jennaj thanks for your answer! I already did several reruns on different days, but I always got the same message. I can't find any warnings in the editor either. The point is, that when using every tool separately, everything works.... Here is the link to my workflow: https://usegalaxy.org/u/malena_trost/w/ba
I give an NCBI SRR number as input to the "Download and Extract Reads in FASTA/Q", than execute MEGAHIT and finally ABRicate.
11 replies
taikongrenren
@taikongrenren
@jennaj yes I followed the official tutorial to install that. I don't know the reason
4 replies
taikongrenren
@taikongrenren
I tried another way to use the command like below, still meet the same problem about "join"
7 replies
image.png
image.png
Melisa Magallanes
@Melisa-Magallanes
Hi there! anybody else is getting a HTTP ERROR 500 at usegalaxy.org?
5 replies
Brian Thompson
@eye_science_bri_twitter
image.png
Does anyone know why deseq produces a matrix with 10 genes when reading in data from sailfish?
13 replies
taikongrenren
@taikongrenren
image.png
taikongrenren
@taikongrenren
Thanks@jennaj for your patient explanation. The command does works in the public server. I follow your suggestions to install another "join tool" and worked. Beside this when I used the tool goseq, my local server and the public server met a same question like
obove
github-ic
@github-ic
Hi - I'm using v21.01 and it's slow in uncompressing fasta.gz or fna.gz files via FTP. Works when uploading a few files but fails for 20 or more. The same uncompressed files load instantly. Has anyone else experienced this?
Melisa Magallanes
@Melisa-Magallanes
Hi!, can RNAMMER be installed?
selten
@selten
@Melisa-Magallanes On which URL are you working? Or which Galaxy?
Robert Leach
@hepcat72
Could anyone help me troubleshoot a failure of the sortmerna data manager?
I explain it here: bgruening/galaxytools#1146
Melisa Magallanes
@Melisa-Magallanes
@selten at usegalaxy.org
Robert Leach
@hepcat72
Hey @bgruening. Sorry to bother you, but do you have any insights into bgruening/galaxytools#1146 It seems I don't know enough about data managers to troubleshoot it.
muscle_body
@tepodone_twitter

@martenson @bgruening:matrix.org
Dear, Martin. Thank you for your advises. I have uploaded files what I use in X!tandem on Galaxy. Can you check them on the following GitHub URL?
https://github.com/m-and-o138/m-and-o138/compare/main...m-and-o138-patch-1?expand=1#diff-c0256b69eda82032850603f4263167eb8bdeee0ed8eb7a35a17b65c59115e95b

Additionally, I also indicated the error messages what I received when I executed the X!tandem on Galaxy.
m-and-o138/m-and-o138#1

I'm not still familiar with GitHub. So, I'm worry about whether you can check my files and error codes. If you could not check them, please contact me again. Thank you.

@martenson
@bgruening:matrix.org
Don't mean to be bothering you, but could you check my trouble mentioned above ?

bgruening
@bgruening:matrix.org
[m]
@tepodone_twitter I'm out this week, can you ping me.next week please? Sorry.
muscle_body
@tepodone_twitter
@bgruening:matrix.org Thank you for your reply. OK, I'll contact you later again.
godwinjames
@godwinjames
Get Data → UCSC Main , In the table browser I can't able download the gene annotation for Arabidopsis thaliana (TAIR 10). Is there any alternate ways to do it?
4 replies
FiReTiTi
@FiReTiTi
Hi, I'm a new user of Galaxy and I just wanted to make a test to create a tool, so I followed this tutorial: https://galaxyproject.org/admin/tools/add-tool-tutorial/
When I modified the file tool_conf.xml.mainto make Galaxy aware of the tool, it was not found, however, when I modified tool_conf.xml.sample it worked. Why?
Nuwan Goonasekera
@nuwang
@FiReTiTi Which file does the tool_config_file setting in your galaxy.yml file point to? By default, it will point to tool_conf.xml.sample.
FiReTiTi
@FiReTiTi
@nuwang That's what surprises me. I would have thought that the .main file was the one to modify, not the sample.
Nuwan Goonasekera
@nuwang
tool_conf.xml.mainrefers to the tool conf on usegalaxy.org which was historically called ‘main’. Admittedly a bit misleading. Perhaps this file is not even needed any more @natefoo?
Nate Coraor
@natefoo:matrix.org
[m]
Yeah, it is not used anymore and should be dropped.
Nuwan Goonasekera
@nuwang
Ok. Will issue a PR
Nate Coraor
@natefoo:matrix.org
[m]
Thanks!
@FiReTiTi: if you have not modified the setting @nuwang referenced (tool_config_file) then you can cp config/tool_conf.xml.sample config/tool_conf.xml and make your modifications there.
Nuwan Goonasekera
@nuwang
Hope the tests don’t use it because there’s still a reference to it there
FiReTiTi
@FiReTiTi
@nuwang @natefoo Thank you for your answers. I didn't see any file config/tool_conf.xml contrary to what was indicated in http://https://galaxyproject.org/admin/tools/add-tool-tutorial/, that's why I tried first to modify the main, and as my test was not found, I tried to modify sample, and decided to ask my question as I found it a little bit confusing.
Glad it ends up being a PR.
natefoo
@natefoo:matrix.org
[m]
Ah yes somewhere we document that you should create tool_conf.xml by copying from the sample if it does not yet exist, but it is missing from that page.
I would recommend using the Galaxy Training Network (training.galaxyproject.org) over that guide, we should probably just remove that page as it's fairly out of date.
Jeevan Karloss
@ajkarloss

I am trying to install galaxy in my MacBook Pro and Getting below errors. Any Tips?

WARNING: The candidate selected for download or install is a yanked version: 'cheetah3' candidate (version 3.2.6.post2 at https://files.pythonhosted.org/packages/7f/ff/d6eebd29ce2d55ce903a268b830302acb05f22f94dff941859776ab79382/Cheetah3-3.2.6.post2-cp36-cp36m-macosx_10_9_x86_64.whl#sha256=62fb67ad64dbe7ec45cf4256745fe4db18245ad335c157c6c788cc3ed24bc6a2 (from https://pypi.org/simple/cheetah3/) (requires-python:>=2.7, !=3.0., !=3.1., !=3.2., !=3.3.))
Reason for being yanked: Failed
Building wheels for collected packages: mercurial
Building wheel for mercurial (setup.py) ... error
ERROR: Command errored out with exit status 1:
command: /Users/jeevka/IRIDA/galaxy/.venv/bin/python -u -c 'import io, os, sys, setuptools, tokenize; sys.argv[0] = '"'"'/private/var/folders/z4/598z4x912_d17v8k299nqtkw0000gn/T/pip-install-k18hs8so/mercurial_da207d2ad9e74fa3b16c10e7785513ba/setup.py'"'"'; file='"'"'/private/var/folders/z4/598z4x912_d17v8k299nqtkw0000gn/T/pip-install-k18hs8so/mercurial_da207d2ad9e74fa3b16c10e7785513ba/setup.py'"'"';f = getattr(tokenize, '"'"'open'"'"', open)(file) if os.path.exists(file) else io.StringIO('"'"'from setuptools import setup; setup()'"'"');code = f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, file, '"'"'exec'"'"'))' bdist_wheel -d /private/var/folders/z4/598z4x912_d17v8k299nqtkw0000gn/T/pip-wheel-vrmt_824
cwd: /private/var/folders/z4/598z4x912_d17v8k299nqtkw0000gn/T/pip-install-k18hs8so/mercurial_da207d2ad9e74fa3b16c10e7785513ba/

nsoranzo
@nsoranzo:matrix.org
[m]
@ajkarloss: That error traceback is not very readable, can you paste it on a gist ( https://gist.github.com/ ), please?