Where communities thrive


  • Join over 1.5M+ people
  • Join over 100K+ communities
  • Free without limits
  • Create your own community
People
Repo info
Activity
kapel93
@kapel93
Hi everyone, I bought hifionrc F7 aio flight controller and its firmware betaflifgt_hifionrcF7 4.2.3 and works. I want to use this board with İnav configurator but I could not find this firmware. Do Someone work to add HifionrcF7 aio to İnav list ?. Thanks
Ryan Hass
@ryanhass_gitlab
Is it possible to use an i2c blackbox rather than a serial one? Eg: https://www.sparkfun.com/products/15164
I am out of UARTs and softserial ports, and this looks like a good option to me.
Ryan Hass
@ryanhass_gitlab
Honestly, I am not sure why i2c isn't used more heavily since it is fast and only uses two pins.
Saijin-Naib
@Saijin-Naib

The OpenDroneMap Community, lead by me in this instance, is looking for people to help contribute to a quadratik funding drive to get OpenDroneMap rebased on 18.04/20.04, snap packages made, and WSL 1/2 images made, in addition to updating/fixing build documentation and tooling, and pushing needed fixes to upstream projects.

If you use/like OpenDroneMap and you'd appreciate the many benefits this project will bring, please consider helping us out.

https://fund.webodm.org/#/fund/5

Thanks so much!

Ivan Riol
@imrj

Honestly, I am not sure why i2c isn't used more heavily since it is fast and only uses two pins.

its prone to interference with longer cables, which in some cases can be solved with ferrite rings around the wires

Is it possible to use an i2c blackbox rather than a serial one? Eg: https://www.sparkfun.com/products/15164
I am out of UARTs and softserial ports, and this looks like a good option to me.

which board do you have? some of the newer F7 boards have like 7 UART

Matt
@matt454
Hi, guys
I need some help with a wing Im building
where would be best for me to ask?
Alex Dragoset
@adragoset
Is there any way to read compass heading on cli. Im using dji goggles and they dont display any compass information on the OSD so theres no way to tell if my compass is setup right.
tart0p0mme
@tart0p0mme
Hello guys, anyone can help me developping on iNav configurator. I'm trying to understand how to get the buzzer settings from my FC
Pavel Sandoval
@pavelius_twitter
Hi guys! im finishing my drak and i find a problem i just cant resolve, in angle or horizon mode the servos doesnt move alone, ive tried armed and with motor on it just doesnt stabilize im in inav 2.6 using f3lightining full fc, thaks for your help
Игорь Федоров
@sith228
Hi!
I use motek 405-se and I want to control it using usb port instead of radio modul. Is there any way to do that?
inav 2.5.0.
xsnoopy
@xsnoopy
Hi all, can I recycle an quad FC (Mamba F405) and use it in a fixed wing? if so where would S1, S2 and S3 end up?
Pietro Campolucci
@pcampolucci
Hey everybody!
I am writing a driver to parse the datastream of this sensor http://www.mateksys.com/?portfolio=3901-l0x#tab-id-2. I am now getting what I wanted, (motion X, motion Y and distance), however I am not sure what the units are. I know INAV has a driver for this sensor so I was wondering if anyone knew what should I do to get the motion X value to mm/sec.
Thank you
alde-heidi
@PinePolymer_twitter
Hi does anyone have any recommendations for avoiding "Error opening log: No logs in this file could be parsed successfully" with black box logs? I'm using a Matek 405 Wing running INAV 2.6.0, I've set the logging to 1/32, flight control loop to 1 kHz, and using the on board microSD slot.
The card I'm using is a onn. 16 GB microSDHC class U1, and I copy the logs to my computer using the msc command in CLI.
When the blackbox explorer can successfully read a log its always shorter than 10 seconds and usually only shows the arm and disarm commands.
PS:
Could someone help me get onto the Telegram group? I was insta-banned even though I answered the math question.
Trankilo
@PoulieTrankilo_twitter
Hi
I am new here so my question is if this is the right place to get support for Inav problems/issues?
Trankilo
@PoulieTrankilo_twitter
Hey guys, how can I add pictures to my message?
Filipp Ozinov
@bakwc
Hi! Does RTH works without gps (or with failed gps)?
Ivan Riol
@imrj
No
charlesmarseille
@charlesmarseille
@bakwc nope. quad needs to know where you are so it comes back.
charlesmarseille
@charlesmarseille
the errors accumulated with IMU sensors make impossible the position estimation accuracy
Filipp Ozinov
@bakwc
How much is the error for 1 km of flight?
julianschweizer
@julianschweizer
I cant get my quad to "compass calibration" via stick commands. No "beeps" after doing stick commands. OSD stick command are working. Latest iNAV, Mamba F405 MK2 FC, Taranis X9D R9M + R9MX.
julianschweizer
@julianschweizer
Any ideas how to debug/find out whats wrong?
joe
@joe:monoid.al
[m]
Hi all
joe
@joe:monoid.al
[m]
What should my barometer be set to for the matek f722-wpx? Apparently is has a DPS310, but that doesn't seem to be available as a selection.
joe
@joe:monoid.al
[m]
Ah, compiled the latest firmware, looks good
just one issue left. I remapped CCtr to a softserial port. however it doesn't seem to be working for smartaudio...
not sure really how to debug thisd
joe
@joe:monoid.al
[m]
well, it works on a hardware uart, and a differently configured softserial
Butterfly
@lettersandnumbersgithub
Hi everyone :)
I'd really like to try INAV, for altitude and position hold and RTH (and headless mode?)
Is the Matek F722-Mini SE and a Hobbywing XRotor Nano 20A a good combination please? (This will be my first build not using an AIO with built in 4-in-1 ESC)
Ivan Riol
@imrj
Depends motor/prop power system dat u plan on havin. 20a is typically on thd too low side
Butterfly
@lettersandnumbersgithub
I have found a 40A version, otherwise the same :)
just wanted to be sure it will support all the features, current draw etc to the FC
gadespc
@gadespc
hi all , community!!!
devimauz
@devimauz
hi
now build under linux is make or build.sh?
imrj
@imrj_twitter
is there dev going on for INAV support of SPEEDYBEEF7V2?
Mikhail Mazurkevich
@mmazurkevich
Hi!
Can you advice me if it's safe to copy my PID settings from Betaflight to INAV?
Tigran997
@Tigran997
Hello everyone, please help me i have iflight succex e f4 v2.1 FC target betaflight4 baro(bmp280) but baro not working (bmp280) color is blue only msp ???
Taboaco
@Taboaco
Hello guys, need help, I have a wing with PIKO BLX and using DJI FPV sistem,
Hello guys, I need help, I have a wing with PIKO BLX and I’m using DJI FPV system, I just can’t get the battery voltage OSD, the MSP is not working, tried “DJI VTX” MSP,… any help?
I saw something about PIKO BLX above but it’s a link to a gihub BetaFlight code, I don’t have a clue about codes 😪
charlesmarseille
@charlesmarseille
hi all, quad running INAV3.0.0 on matekF405ctr. When adding a servo rule in mixer tab, all motor ouputs offset by one and servo gets attributed to S1 (instead of S5 or S6). This means if I add a servo I must resolder all motors??
charlesmarseille
@charlesmarseille
just realized that's a known bug.. so one must recompile inav after modification of resources in traget.h file since no resource remapping can be made in inav_configurator... good lord.
mateoc6
@mateoc6
Hi all, I just recently got a Blade Vortex 250 pro and was wondering if anyone knew if it would still work with the INAV3.0 or is not compatible anymore?