Where communities thrive

  • Join over 1.5M+ people
  • Join over 100K+ communities
  • Free without limits
  • Create your own community
  • Jan 31 2019 14:36
    procdaddy11 opened #1294
  • Jan 31 2019 07:45
    bithost commented #274
  • Jan 31 2019 00:14
    mawiseman opened #1293
  • Jan 30 2019 04:30
    jotatsu synchronize #1258
  • Jan 30 2019 04:30

    jotatsu on RemoveMagicLib

    Improvement in protocol to tab … (compare)

  • Jan 30 2019 04:19
    jotatsu synchronize #1258
  • Jan 30 2019 04:19

    jotatsu on RemoveMagicLib

    Screenshot only taken from Conn… (compare)

  • Jan 29 2019 21:13
    kmscode commented #222
  • Jan 29 2019 21:09
    kmscode milestoned #222
  • Jan 29 2019 21:03
    jurlwin commented #222
  • Jan 29 2019 16:30
    sparerd commented #1292
  • Jan 29 2019 16:17
    longtth edited #1292
  • Jan 29 2019 16:17
    longtth opened #1292
  • Jan 28 2019 19:28
    sparerd labeled #1291
  • Jan 28 2019 19:28
    sparerd opened #1291
  • Jan 28 2019 19:16
    farosch synchronize #1258
  • Jan 28 2019 19:16

    farosch on RemoveMagicLib

    fixed position of ok button (wa… (compare)

  • Jan 28 2019 19:03
    benwa edited #1290
  • Jan 28 2019 19:03
    benwa edited #1290
  • Jan 28 2019 18:57
    sparerd commented #1290
When I open a connection with a saved password, it have the same timeout issue.
I can also manually go and run mstsc with the required connection, it do connect successfully after entering username and password.
I had a look, but can't see where I can increase the timeout to prevent sessions from timing out.

The error message is : RDP disconnected!
264 This computer can't connect to the remote computer.

The two computers couldn't connect in the amount of time allotted. Try connecting again. If the problem continues, contact your network administrator or technical support.

But, as I said, using MSTSC.exe works 100%.
Hello, i have Baramundi Client Management. Normaly i install mRemoteNG MSI with "/qn /norestart ALLUSERS=2". which command i have to use to update an existing installation on a client?
Hey, I'm not sure if I just discovered a security bug with mRemoteNG or if it's a Windows 10/Sever 2019 thing, but I can EASILY bypass the need to use a password or 2FA to log back into a locked RDP session
timeout issue has been sorted - in tools - options - connections there is a timeout value that you can increase. All is good now.
Paul Dawson
Hello I had a question about audio specifically using a microphone in the software? I was able to get audio working, but my mic wouldn't work on the remote session. TIA
Bultez Aurélien
Hello guys !!!
I got an issue with MSSQL
2020-07-21 10:03:58,505 [12] INFO - Saving connections...
2020-07-21 10:03:58,566 [12] ERROR - Impossible d'enregistrer le fichier de connexions sous "" !
Le ColumnMapping fourni ne correspond à aucune colonne de la source ou de la destination.
When i connect and try to create a connection, i got a flashing red notification
it's a fresh install MSSQL 2019 + Mremote 1.76 (stable)
Any idea ?
Bultez Aurélien
Ok, pb solved, thx :)
Luke Attard
Hi, I have only really started to go through the code to learn mRemoteNG, however I have a quick question, I notice we have DockPanelSuite being used for docking etc, but it looks like we also use the magicdock library, is there a reason for both? or is this just a legacy hang over?
Joe Cefoli
legacy hangover. @farosch worked on removing MagicDock. All the project maintainers seemed to have vanished in the past two weeks
Luke Attard
fair enough
I replied to your issue with RDP, two or three lines of code should fix it, I can seem to submit a pull request however
Joe Cefoli
That fixed the strange windowing behavior. Is there any way to make it maximize the fullscreen RDP session from the taskbar if you click on its associated tab in the app? Because it still tabs the fullscreen window, it just doesn't show it (Don't mind me - I'm not exactly a C# dev)
Faryan Rezagholi
@lukeattard dockpanelsuite has replaced the magic library completely as of now, at least in the develop branch.
I guess you did take a look at the source code from the latest release (v1.76). In that version we actually used both libraries for transitioning.
v1.77 does not use magiclib at all
How can I use dual monitors with mRemote?
Hi guys, quick question. Is it allowed to use your software in an cooperate Environment
@ozadeh123 its written under GPL 2 license
"When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things."
Hi, I'm trying to configure rRemoteNG to work with Cyberark PSM and not having any luck. My Cyberark rep got it to work on his end by creating an External tool with the same info we would normally put in the alternate shell field in an rdp config, but when I do that and connect, rather than pulling the external tool config and running that, it just does a normal rdp session to my PSM server. anyone in here been able to get PSM to work?

Good morning,

I have created a DB in sql server to use mremoteng against a DB but it doesn't work for me, when I create a new connection it tells me the following error: "Could not save the connections file as" "!
The provided ColumnMapping does not match any column in the source or destination. "

Another error that I detect is in the script to create the DB as it shows the following error: "Msg 2716, Level 16, State 1, Line 16
Column, parameter, or variable # 25: Cannot specify a column width on data type tinyint. "

Can somebody help me?

Bennett Blodinger
What brand and version of SQL are you using?
Good Morning, I'm trying to replace a similar product that we haven't been able to upgrade since 2013, and because of that it's having all sorts of issues with the newer operating systems. I'm trying to get the MSSQL version to emulate the networked version of Visionapp that we previously used. I would like to be able to have both Public and Private credentials including passwords saved in the DB. I've got the public, shared portion working, I just haven't figured out if it supports private credentials? Thanks for your help.
¿Could you share your database with me but without data?
2W Consultoria
Hi, anyone have a information about a date for a new stable release? Thanks
hello, i have isues importing mysql script, anyone has an ideea what I am doing wrong ? thanks Error:
@2w-consultoria there is no information of new stable release yet unfortunately

Apologies for the question (I did some research but could n't find the answer)
I have 100s of devices sitting behind two boxes so I'm trying to ssh from my mremote to server{x} using this:
mremote --> Bastion --> Jumphost --> Server {x}

Do you know if this is possible?. In secureCRT exist something that does this and it is called firewall

@comanra in the 1.77 version there is a patch added to allow ssh bastion host. However if you want to do it now. Look up a way like putty and bastion. Then you can apply that using a profile
Hi all, was curious regarding my open issue regarding VMRDP not working to Linux (mRemoteNG/mRemoteNG#1673), after recent activity I decided to re-look at it and can get things to work in by using mRemoteNG-removecitrix( and setting Use Enhanced Mode to disabled, any idea why?
Marc Laporte
@marclaporte_gitlab There are two dowload options. Any wisdom on this? Better to stay with stable? Or newer version has important fixes and not too many regressions?
Anyone know how to copy and paste from local computer to remote computer
It used to work before but it suddently it stop working. I can't copy any file from local computer and paste to remote computers
Hi Everyone,
I am trying to import CSV list of Hosts/Switches to mgremotng, but for some reason import is failing.
Can someone please share with me a simple example of CSV file, I just want to know which attributes I need minimum for CSV file.
All I want is a simple import i.e Connection Name, Hostname and Protocol
Is there anyone who can help me with mysql error?
2020-09-22 21:40:58,054 [1] ERROR - Retrieving database version failed. System.ArgumentException: Version string portion was too short or too long.
at System.Version.VersionResult.SetFailure(ParseFailureKind failure, String argument)
at System.Version.TryParseVersion(String version, VersionResult& result)
at System.Version.Parse(String input)
at System.Version..ctor(String version)
at mRemoteNG.Config.Serializers.ConnectionSerializers.MsSql.SqlDatabaseMetaDataRetriever.GetDatabaseMetaData(IDatabaseConnector databaseConnector) in L:\mRemoteNG\Config\Serializers\ConnectionSerializers\MsSql\SqlDatabaseMetaDataRetriever.cs:line 33
2020-09-22 21:40:58,071 [1] ERROR - Load from SQL failed
Version string portion was too short or too long.
I'd like to share a solution. Thank you in advance.
James Epp
Latest version (downloaded from website). I think I've discovered an inconsistency in documentation. The script here ( does not match the script that is available in the F1 menu.