These are chat archives for machinekit/machinekit

25th
Aug 2016
zhivko
@zhivko
Aug 25 2016 04:39
Hi all, in linuxcnc docs http://linuxcnc.org/docs/2.7/html/user/user-concepts.html, I read "When LinuxCNC first starts up many G and M codes are loaded by default. The current active G and M codes can be viewed on the MDI tab in the Active G-Codes: window in the AXIS interface." Are current active g and m gcodes somehow exposed through any machinekit interface? In docs i found they are mentioned at http://www.machinekit.io/docs/common/python-interface/ - are they part of status service?
Michael Haberler
@mhaberler
Aug 25 2016 07:30
only read them, do not set them via Python
zhivko
@zhivko
Aug 25 2016 07:30
hi thanks!
Michael Haberler
@mhaberler
Aug 25 2016 07:31
you need to look in the interpreter source which array member means what
zhivko
@zhivko
Aug 25 2016 07:31
Just did grp from generated PB classes and guess what
Found a lof of them there :)
LIke EmcStatusMCode...
Michael Haberler
@mhaberler
Aug 25 2016 07:31
well that is just ontop of tje Python api
but yes, same values
zhivko
@zhivko
Aug 25 2016 07:31
OK thanks - that is what I needed... :)
dont know if i can post picture here ? ;) I now get better velocity profile with rotating pipe... :)
But still there is this zigzag in velocity profile I could not explain...
Michael Haberler
@mhaberler
Aug 25 2016 07:32
try it - it works
zhivko
@zhivko
Aug 25 2016 07:33
constantSpeed.png
Michael Haberler
@mhaberler
Aug 25 2016 07:34
is that speed drop in a corner?
zhivko
@zhivko
Aug 25 2016 07:37
Yes
Michael Haberler
@mhaberler
Aug 25 2016 07:37
so it's acc limiting in motion I guess
zhivko
@zhivko
Aug 25 2016 07:37
I mean this zigzag annoys me
Do you know with what gcode turnon naivecam detector?
zhivko
@zhivko
Aug 25 2016 07:41
Oopd sorry again...
Oops. Yes i tried this... G64 p1
Michael Haberler
@mhaberler
Aug 25 2016 07:43
happy to be your personal googler ;)
zhivko
@zhivko
Aug 25 2016 07:44
It is funny how this happens on entrance to fillet - at exit no zigzag in profile...
This could mean I need to start turning pipe few seconds before... Maybe it could solve this...
Michael Brown
@the-snowwhite
Aug 25 2016 19:06
Ok