These are chat archives for nightscout/intend-to-bolus

6th
Jun 2015
might help organize subcommittees in NS/openaps better
Holger Sanft
@holgi13
Jun 06 2015 00:07
@diabeticgonewild If you tell here your hard way, I can immediately remember my own chemo. Hope so much everything gone good for you, don't give up.
Ben West
@bewest
Jun 06 2015 00:07
yeah, sounds awful :-(
hope it goes as well as it can, and is over quickly
diabeticgonewild
@diabeticgonewild
Jun 06 2015 00:11
Thank you. I did cytoxan before as chemo as immunosuppeession and it sucked! Like I at gyros before each treatment as my "last meal" and I can't eat them anymore. Also, one time I was "anticipating" the chemo on the way to the hospital and I puked (vomited) cause it was "nerves" from previous treatments. It's not fun at all
I do intend on getting a couple of rileylinks though
I am going to take a shower then put a Dexcom sensor in. Hopefully I will feel better...
Jason Calabrese
@jasoncalabrese
Jun 06 2015 00:15
@bewest, looks like I need to be added to the loomio thing, seems like an interesting idea
diabeticgonewild
@diabeticgonewild
Jun 06 2015 00:41
:D
Nathan Racklyeft
@loudnate
Jun 06 2015 01:40
Definitely excited for a RileyLink!
Is anybody going to be in town next week for WWDC? PM me if so!
Ben West
@bewest
Jun 06 2015 08:22
@sulkaharo @ps2 https://www.surveymonkey.com/s/QCXWRHM sulka was curious if it will do erupean frequency 866 mHZ
Toby Canning
@TC2013
Jun 06 2015 15:30
@jasoncalabrese @bewest Did any of the usb power off commands actually work in the early versions of the uploader? If yes, will they potentially work with the CareLink until we get the RileyLink going?
Eric
@ecc1
Jun 06 2015 15:38
@bewest The CC1111 definitely supports the 868MHz band (it's just 3 bytes set to different values in the firmware). Whether it's worth making it dynamically switchable vs. just flashable is another question.
Pete Schwamb
@ps2
Jun 06 2015 15:51
@bewest Yes, from a software side, the cc1110 supports 300 - 348 MHz, 391 - 464
MHz and 782 - 928 MHz. On the RileyLink, if you wanted 866MHz, you’d probably want to use this antenna instead of the one I list: http://www.mouser.com/ProductDetail/Linx-Technologies/ANT-868-JJB-RA/?qs=sGAEpiMZZMuBTKBKvsBmlOBg0H7cD5uyGwBydUtC4j0%3d
Jason Calabrese
@jasoncalabrese
Jun 06 2015 15:51
@TC2013 I saw them work partially, but there was a bug that caused it to get stuck sometimes
Pete Schwamb
@ps2
Jun 06 2015 15:51
Same form factor, different freq, so it should be a drop in.
Jason Calabrese
@jasoncalabrese
Jun 06 2015 15:52
With some debugging it would work correctly
Toby Canning
@TC2013
Jun 06 2015 16:03
@jasoncalabrese Do you have an idea where I might look for some example code? I think I can probably track it down though.
Never mind, found it! It was in DexcomG4Service.java... I think
Ben West
@bewest
Jun 06 2015 19:37
thanks, @sulkaharo good info above ^^^
Sulka Haro
@sulkaharo
Jun 06 2015 19:48
Cool. Yes, anyone in Europe will want 868 MHz - @ps2 is this possible to accommodate in the mass order?
Fokko Driesprong
@Fokko
Jun 06 2015 21:30
I am interested in an 868Mhz edition.
Holger Sanft
@holgi13
Jun 06 2015 21:31
Me too
Toby Canning
@TC2013
Jun 06 2015 21:37
:point_up: June 6 2015 10:51 AM Looks like you should be good with this change.
diabeticgonewild
@diabeticgonewild
Jun 06 2015 21:49
Going to try to figure out how to decode the JSON files from the Medtronic pump using Python. Is there an IDE for Python? I have a feeling that's a dumb question...
I'm also going to see if the derivative for the 530G function is accurate too...that's an easy task, given it's presumably right
Never mind I pick sublime text for python
Fokko Driesprong
@Fokko
Jun 06 2015 21:52
Hi @diabeticgonewild, I prefer IntelliJ, it has a Python plugin which provides some Intellisense.
Ben West
@bewest
Jun 06 2015 21:53
import json
with open('my.json') as f:
  data = json.load(f)
the agp module has example of this
Fokko Driesprong
@Fokko
Jun 06 2015 21:53
I have changed the python-script to download all the CGM data from the Medtronic pump and put it in a single massive JSON file: https://github.com/Fokko/decoding-carelink/blob/dev/bin/mm-glucose.py
diabeticgonewild
@diabeticgonewild
Jun 06 2015 21:54
Got it. Thank you all
Ben West
@bewest
Jun 06 2015 21:54
@Fokko I'm recommending openaps for that stuff now :-)
openaps use pump iter_glucose will dump as much as you like in order
diabeticgonewild
@diabeticgonewild
Jun 06 2015 21:55
That's very nice
Ben West
@bewest
Jun 06 2015 21:55
but if you target decocare, use my bewest/dev branch
for pr
Fokko Driesprong
@Fokko
Jun 06 2015 21:56
Cool, I will definitely take a look at it.