These are chat archives for nightscout/intend-to-bolus

7th
Feb 2016
Jason Calabrese
@jasoncalabrese
Feb 07 2016 00:25
not sure if my edison is messed up or not, but there are wpa pid files directly in /var/run/ and /var/run/wpa_supplicant is empty
on the pi there's a wlan0 in /var/run/wpa_supplicant
Jason Calabrese
@jasoncalabrese
Feb 07 2016 00:42
@TC2013 that wifi script seems to work pretty good, better than the broken 1 liner I had
Jim Matheson
@jmatheson
Feb 07 2016 00:46
I’ve documented everything I had to do in order to get the Edison + Sparkfun Base Board + TI stick setup. Some points to steps from other repos, while some are things I grabbed from various conversations in here and over on mmeowlink. https://github.com/jmatheson/murselessaps/blob/master/edison-sparkfun-tistick.md
I am happy to put it in openaps docs or mmeowlink wiki or whatever makes sense if people find it useful
Jason Calabrese
@jasoncalabrese
Feb 07 2016 00:58
@TC2013 sent you a little PR TC2013/edison_wifi#1
Jason Curry
@mccgm
Feb 07 2016 01:06
@jmatheson, Thanks again, your help has been invaluable today
Vizualizing my loop on NS!
Jim Matheson
@jmatheson
Feb 07 2016 01:07
nice, congrats
Jason Calabrese
@jasoncalabrese
Feb 07 2016 01:07
great
Dana Lewis
@danamlewis
Feb 07 2016 01:09
:+1:
Jim Matheson
@jmatheson
Feb 07 2016 01:29
@cozmo did you end up taking a look at @loudnate ’s G5 Ble comms?
Jason Calabrese
@jasoncalabrese
Feb 07 2016 01:48
@jmatheson just saw you're using cc-tool, I've been wanting to do that, going into a windows vm to flash is painful
Jim Matheson
@jmatheson
Feb 07 2016 01:49
yeah, i learned everything from @loudnate at the meetup. It’s not too difficult especially since we don’t need to worry about creating the hex files anymore.
Jason Calabrese
@jasoncalabrese
Feb 07 2016 01:50
yeah, that's nice
going to put that on my list
Jim Matheson
@jmatheson
Feb 07 2016 01:57
it was pretty slow to install on the pi. I don’t have a linux stick setup for my mac yet
Scott Leibrand
@scottleibrand
Feb 07 2016 01:57
I just used cc-tool to upgrade my slice of radio to 0.6: quite painless
my current pain point is I now have 4 rigs in the apartment and they keep stomping on each other
Jim Matheson
@jmatheson
Feb 07 2016 01:58

firstworlddiabetichouseproblems

Scott Leibrand
@scottleibrand
Feb 07 2016 01:58
need to implement some sort of listen-before-send thing
Jason Calabrese
@jasoncalabrese
Feb 07 2016 02:00
yeah, getting more important
edison knocks out a carelink, causes trauma on the pi with all the usb resetting
maybe a little fix there will help
maybe an alternative to mm-stick warmup that doesn't need to talk to the pump
?
Scott Leibrand
@scottleibrand
Feb 07 2016 02:02
mm-stick warmup doesn't talk to the pump
Jason Calabrese
@jasoncalabrese
Feb 07 2016 02:02
I didn't think so, but why is it failing
Scott Leibrand
@scottleibrand
Feb 07 2016 02:02
because the stick firmware gets into a broken state from previous comms
and then stays broken until you reset-usb
Jason Calabrese
@jasoncalabrese
Feb 07 2016 02:03
happens fast
maybe need to a put pi into a backup mode
Scott Leibrand
@scottleibrand
Feb 07 2016 02:03
probably happens more often when there's unexpected data from other rigs
I just unplugged our last carelink. :)
Jason Calabrese
@jasoncalabrese
Feb 07 2016 02:04
guess I could do that soon
2 RLs and a Ti stick should be enough
but nice to have something that I've trusted for months there as a backup
just don't want it to get in the way
Ali Mazaheri
@amazaheri
Feb 07 2016 02:07
what is CareLink anyways?
Jason Calabrese
@jasoncalabrese
Feb 07 2016 02:10
funny how I always feel behind, guess it's a good thing
Jim Matheson
@jmatheson
Feb 07 2016 02:17
i have 3 carelinks that are about to go up for sale
eyim
@eyim
Feb 07 2016 03:49
I'm completely off care link as well. Good ridance
Scott Leibrand
@scottleibrand
Feb 07 2016 03:56
:-)
Dana Lewis
@danamlewis
Feb 07 2016 03:59
Ya'll could also consider passing them on to someone who wants to get started looping :)
Jason Calabrese
@jasoncalabrese
Feb 07 2016 04:09
The received hack bugs me
Anyone else seeing enacted.json get deleted and not recreated even when temp is sent?
Ali Mazaheri
@amazaheri
Feb 07 2016 04:14
I have not seen this issue at all
Jason Calabrese
@jasoncalabrese
Feb 07 2016 04:29
Ok, good, then probably a bug in my ini
Thomas Emge
@ThomasEmge
Feb 07 2016 05:13
@amazaheri were you using Windows10 to flash the Edison?
Ali Mazaheri
@amazaheri
Feb 07 2016 05:24
yeah
Thomas Emge
@ThomasEmge
Feb 07 2016 05:25
I just tried a different usb cable and now it works (as stated in the documentation).
Scott Leibrand
@scottleibrand
Feb 07 2016 05:28
I've seen disappearing enacts. Seems to be related to failure to get response back from subg_rfspy. I put some workarounds in things that depend on enacted.json to not run if it's empty/missing...
Jason Calabrese
@jasoncalabrese
Feb 07 2016 06:22
It's mostly a status issue for me, but still annoying
my wifi switch script seems to stop working after a while
Sulka Haro
@sulkaharo
Feb 07 2016 15:08
Trying a slightly modified case design, which (hopefully) supports easily swapping an 18650 battery. Would contain Edison + ERF + xDrip powered from the Edison. Run overnight plugged into USB while charging battery, use with 18650 during day and carry additional batteries if needed. Each is 3400 mAh, so it should be easy to have the entire thing powered through a weekend with just two batteries. Then have an Android phone with Hotspot and xDrip Plus running on it. OpenAPS on the belt, phone in pocket / bag.
Jason Calabrese
@jasoncalabrese
Feb 07 2016 15:47
Now that we can use the button on the Edison to shut it out down cleanly that would work
Thomas Emge
@ThomasEmge
Feb 07 2016 16:14
I am attempting to put Ubilinux on the edison. After running flashall.bat everything looks ok in the CLI but when I connect after 20 minutes with the serial USB port I never get the debian console. the terminal stays blank. The last entry in flash.log is Cannot allocate memory of size 1610612736 bytes.
Is this an indication of something?
Jason Calabrese
@jasoncalabrese
Feb 07 2016 16:22
You need some swap, there's info about it in the wiki right above the flashing info
But I wasn't able to flash my 2nd Edison last night
Thomas Emge
@ThomasEmge
Feb 07 2016 16:27
hmm, which wiki?
Thomas Emge
@ThomasEmge
Feb 07 2016 16:34
oh yes, found it...need to think about what it means for Windows.
Jason Calabrese
@jasoncalabrese
Feb 07 2016 16:43
Do you have a pi that you can use?
Thomas Emge
@ThomasEmge
Feb 07 2016 16:45
I do...but now it is a matter of principle ;)
Jason Calabrese
@jasoncalabrese
Feb 07 2016 17:05
:smile: I know how that is, when you figure it out we should get in docs somewhere
Jim Matheson
@jmatheson
Feb 07 2016 17:06
what happened with your flash attempt?
Jason Calabrese
@jasoncalabrese
Feb 07 2016 17:08
It's getting stuck, I get the message to wait 2 minutes for reboots, but it didn't reboot
I'm blaming the sparkfun board
I have a 3rd Edison coming tomorrow then I'll have 2 with the Intel board and 1 with sparkfun, since the first Intel bord was fried plugging a li-po in backwards
I'll play with it some more today, but might move on to something else on my list
Jim Matheson
@jmatheson
Feb 07 2016 17:11
yeah mine was a pain. did you get the console to at least work?
Jason Calabrese
@jasoncalabrese
Feb 07 2016 17:12
Yeah, I have the console
Jim Matheson
@jmatheson
Feb 07 2016 17:12
oh, i missed your 2 minute stuck message
so the whole thing flashed and it craped out at the end?
Jason Calabrese
@jasoncalabrese
Feb 07 2016 17:13
I plug the USB otg to the pi when it asks for replug
Jim Matheson
@jmatheson
Feb 07 2016 17:13
here is what i figured out
Jason Calabrese
@jasoncalabrese
Feb 07 2016 17:13
Then quickly plug the console cable in, since on the sparkfun that also powers the board
Jim Matheson
@jmatheson
Feb 07 2016 17:13
at the start when it ask you to unplug/replug…. yank the edison from the board
Jason Calabrese
@jasoncalabrese
Feb 07 2016 17:14
Hmm, I was only pulling USB cables
Jim Matheson
@jmatheson
Feb 07 2016 17:15
yeah, that’s your issue.
Jason Calabrese
@jasoncalabrese
Feb 07 2016 17:15
You do that with the board already powered? Feels dangerous
Jim Matheson
@jmatheson
Feb 07 2016 17:15
yes. (probably is, but that is what worked)
let me see if i have my notes somewhere
it’s in here
3,4,5 in that order is what worked for me
i think it might be best to leave the board unhooked and then plug it in at the end when it says to power cycle it. instead of yanking it and putting it back on. but i never tried that.
Jason Calabrese
@jasoncalabrese
Feb 07 2016 17:18
Don't see anything about pulling the Edison from the board
Jim Matheson
@jmatheson
Feb 07 2016 17:19
last sentence of #5 is what i added
Jason Calabrese
@jasoncalabrese
Feb 07 2016 17:19
Oh
Ok, I'll try it now
Jim Matheson
@jmatheson
Feb 07 2016 17:23
i guess the board probably has to be in first now that i think about it :+1:
Eric
@ecc1
Feb 07 2016 17:23
I definitely wouldn't recommend unplugging/replugging the Edison module while powered on; that's asking for trouble. Did you have both OTG and console cables connected (and terminal window attached to console port) when you said it didn't reboot?
Jim Matheson
@jmatheson
Feb 07 2016 17:25
i would say nothing else worked.
Jason Calabrese
@jasoncalabrese
Feb 07 2016 17:25
I think the sparkfun board just isn't good for flashing
that didn't work, but doesn't seem like I fried anything
Jim Matheson
@jmatheson
Feb 07 2016 17:26
you may be able to install sudo apt-get install -y acpid first before trying to flash it. then when it asks you to reboot then just hit the power button on the sparkfun.
Jason Calabrese
@jasoncalabrese
Feb 07 2016 17:27
if I stop the auto boot I can get to the u-boot commandline
Eric
@ecc1
Feb 07 2016 17:27
That can't work, because it will be gone after the flashing (it overwrites the entire root partition)
^^^ acpid / power button
Jim Matheson
@jmatheson
Feb 07 2016 17:27
you only need to reboot it at the start though
Jason Calabrese
@jasoncalabrese
Feb 07 2016 17:27
last time I was able to do run do_flash when asked to reboot
Jim Matheson
@jmatheson
Feb 07 2016 17:27
that is where it is getting stuck
i think the 2x reboot at the end works fine on it’s own
i think i ended up doing a run do_flash as well because i had partially flashed before and it did not work.
anyway, i think i was stuck in the same spot you are and a combination of these things are what worked for me after trying a few times.
Eric
@ecc1
Feb 07 2016 17:30
I guess I'm just lucky, because I've had no issues with sparkfun base board and following their "flashing ubilinux" instructions.
But I am using a Linux desktop, not an RPi ...
Jim Matheson
@jmatheson
Feb 07 2016 17:30
how did you reboot at the start when it asked you to?
pull both otg and console cables?
Jason Calabrese
@jasoncalabrese
Feb 07 2016 17:31
thats where the intel board is easier
you can leave console attached
and just pull otg
Jim Matheson
@jmatheson
Feb 07 2016 17:32
yeah, so on the sparkfun that is powered, so i think that’s why it’s not working.
i think installing acpid might be the best (least risky) option to get that first reboot to happen
Jason Calabrese
@jasoncalabrese
Feb 07 2016 17:33
doing the 10min step now, but when I saw that work in the past there was more activity on the console
install acpid on yocto?
Jim Matheson
@jmatheson
Feb 07 2016 17:33
mine took 15 minutes and it did zero. then eventaully started buidling out a row of #’s
it took way longer than 10 minutes when flashing from the PI. probably 25 total
Jason Calabrese
@jasoncalabrese
Feb 07 2016 17:34
I'll attempt to be patient, but did leave it like this for hours last night
Jim Matheson
@jmatheson
Feb 07 2016 17:34
yes. then you would not have to yank the edison itself to reboot it at the start.
even 25 feels low. it takes forever even before it shows any progress
not hours though
Eric
@ecc1
Feb 07 2016 17:38
Ah, all this slowness is probably because it's swapping on the Pi, but just flashing from RAM on my desktop.
Jim Matheson
@jmatheson
Feb 07 2016 17:38
yeah. it is like waiting for a PC to boot up vs a mac.
Eric
@ecc1
Feb 07 2016 17:39
Probably worth booting a PC or Mac with a live Linux distro on USB stick, just to flash Edisons ...
Jim Matheson
@jmatheson
Feb 07 2016 17:39
yes. how do i do that? that is what @loudnate had.
Jason Calabrese
@jasoncalabrese
Feb 07 2016 17:42
I have a linux desktop, but it's so old trying to get current versions of anything installed wouldn't be fun
Jim Matheson
@jmatheson
Feb 07 2016 17:44
i first tried to flash my ti stick with a pc from 2008 with xp on it. shockingly it did not work
Jason Calabrese
@jasoncalabrese
Feb 07 2016 17:49
doesn't ever get to 10mins, I'm wondering if something is killing the dfu process, maybe a watchdog
Jim Matheson
@jmatheson
Feb 07 2016 17:49
no # yet?
Eric
@ecc1
Feb 07 2016 17:50
I think the Live Ubuntu images are widely used. This page has instructions for PCs and Macs: http://www.ubuntu.com/download/desktop
Even though it says it's an installer, it also gives you the choice to run it live from the USB stick.
Jim Matheson
@jmatheson
Feb 07 2016 17:50
thank you
Ali Mazaheri
@amazaheri
Feb 07 2016 17:51
@ThomasEmge increase the page sizs to 2GB that shod do it.
Jim Matheson
@jmatheson
Feb 07 2016 17:59
@jasoncalabrese did you remember to set up your swap on the pi? i had forgotten
Jason Calabrese
@jasoncalabrese
Feb 07 2016 18:07
yeah, I have swap, I had watchdog running, and stopped that
been going longer than last time
and dfu-util is still running
and using a bunch of memory
and now shows download
maybe that was it, if it works I'll update the wiki
Jim Matheson
@jmatheson
Feb 07 2016 18:18
sweet
Jason Calabrese
@jasoncalabrese
Feb 07 2016 18:19
ugh, got to 72% download and then I lost ssh to the pi, think the kernel killed it
going to try with more swap
1G seem too close dfu-util was using 94%
Jason Calabrese
@jasoncalabrese
Feb 07 2016 19:08
IT FINALLY WORKED
there were a combination of issues, so not sure what the actual solution was, but I ended up using a 2G swap instead of the 1G from the wiki and stopped watchdog
Jim Matheson
@jmatheson
Feb 07 2016 19:20
nice
Jason Calabrese
@jasoncalabrese
Feb 07 2016 19:21
I added a couple notes to the wiki
updated you're step 5 some
now says "If nothing else works, and you're feeling brave, you can try pulling the Edison out and reconnect it to the board to start the flash process."
Jim Matheson
@jmatheson
Feb 07 2016 19:22
the next person that tries we should try to get to install the software for the reboot button.
Jason Calabrese
@jasoncalabrese
Feb 07 2016 19:24
seems that we don't need it, but I'll see how the next one goes tomorrow
Jim Matheson
@jmatheson
Feb 07 2016 19:24
yup. so you got it to work without unplugging it?
Jason Calabrese
@jasoncalabrese
Feb 07 2016 19:26
yeah
just unplugging cables
I used run do_flash for the reboot
probably should add that to the wiki too
Jim Matheson
@jmatheson
Feb 07 2016 19:29
yea, i did that too in the end.
Jason Calabrese
@jasoncalabrese
Feb 07 2016 19:30
I added it to troubleshooting
Ali Mazaheri
@amazaheri
Feb 07 2016 19:38
You never listen to me @jasoncalabrese hehe :)
glad it worked out
Scott Leibrand
@scottleibrand
Feb 07 2016 19:44
acpid shouldn't be needed: just sudo halt from console, unplug cables, then plug in OTG then console. If it doesn't power on, power button should bring it back fine without acpid.
Eric
@ecc1
Feb 07 2016 19:47
Right, and acpid won't still be there after the flash anyway
Jim Matheson
@jmatheson
Feb 07 2016 19:51
daily noon amazon order rush completed with 10 minutes to spare :)
eyim
@eyim
Feb 07 2016 19:53
Yep one of my kids just asked me "Did you order another battery?"
Jim Matheson
@jmatheson
Feb 07 2016 19:53
haha
Ali Mazaheri
@amazaheri
Feb 07 2016 19:54
"These are not the batteries you are looking for" :smile:
Jason Calabrese
@jasoncalabrese
Feb 07 2016 19:57
Speaking of batteries, I'm using the 850's we ordered with the RLs a while ago, send like I could go bigger. Would be nice to have it just be thicker but same shape.
Any suggestions? I think this is to hold over till I get a case like @sulkaharo
Sulka Haro
@sulkaharo
Feb 07 2016 19:59
I've tried searching for good form factor LiPos but haven't found yet
Higher capacity ones seem to be made for tablets -> area is huge
Jason Calabrese
@jasoncalabrese
Feb 07 2016 20:00
Also the pi we had been using for production has a flashing red light, saw that it could be the power supply. Anyone run into that?
I think @amazaheri said the 850 went about 12 hours, but without a way to check levels it makes me nervous
Maybe that was 8 hours?
Jim Matheson
@jmatheson
Feb 07 2016 20:02
time quotes are with no usb connections anywhere right?
Jason Calabrese
@jasoncalabrese
Feb 07 2016 20:02
Yeah, USB uses lots of power
Jim Matheson
@jmatheson
Feb 07 2016 20:02
“i don’t want to nor do i know how to solder” is shortly going to be “i solder all the time, do you want my help at the next meeup?"
Jason Calabrese
@jasoncalabrese
Feb 07 2016 20:04
Yeah, I didn't see a way around it, always wanted to do electronics stuff, but never got to it
Ali Mazaheri
@amazaheri
Feb 07 2016 20:05
I can confirm 12 tomorrow, but 8hrs for sure with RL.
Jason Calabrese
@jasoncalabrese
Feb 07 2016 20:05
Great, I used if a lot yesterday, but plugged in when we could
But then last night I powered it off, in the morning battery was gone
Ali Mazaheri
@amazaheri
Feb 07 2016 20:06
Also updated wiki following @jasoncalabrese notes and added steps for troubleshooting Windows when using do-flash.bat
Jason Calabrese
@jasoncalabrese
Feb 07 2016 20:06
I was expecting to just push the button and have it turn on, but had to attach to a USB battery
Joakim Ornstedt
@joakimornstedt
Feb 07 2016 20:46
How do i get an "official" OpenAPS user number
Jim Matheson
@jmatheson
Feb 07 2016 20:49
it’s about a 2 week process and $45. You get a nice certificate though.
just fill out that form..
congrats on getting going! (joke about the process)
Scott Leibrand
@scottleibrand
Feb 07 2016 20:59
Heh. I can attest that Dana doesn't take that long (or charge for the privilege) ;-)
there is a link to that form in the docs. If you didn't see it, you might want to read through the rest of the docs and see what else you might have missed.
Dana Lewis
@danamlewis
Feb 07 2016 21:00
Sigh, @jmatheson :p
Jim Matheson
@jmatheson
Feb 07 2016 21:01
@scottleibrand @danamlewis, probably not a well thought out joke. Dana is amazingly fast.
Dana Lewis
@danamlewis
Feb 07 2016 21:04
Certificates are lame in comparison to having a full fledged working APS :)
Jim Matheson
@jmatheson
Feb 07 2016 21:05
This message was deleted
This message was deleted
Joakim Ornstedt
@joakimornstedt
Feb 07 2016 21:17
@scottleibrand I have created my own implementing of OpenAPS so therefore I have not read all of the documentation. I wonder about this question "What parts of the loop software stack are you using?
Dana Lewis
@danamlewis
Feb 07 2016 21:17
@joakimornstedt Ie are you leveraging oref0?
If you're not doing a traditional implementation, you won't necessarily get a umber, but if you're using the openAPS toolkit for your loop we need to know regardless so we can ping you if we find a major bug that will impact you. So if you are looping for multiple days, and are using pieces of openAPS (even if not all), you can still fill it out
But I have not yet run my close loop
Dana Lewis
@danamlewis
Feb 07 2016 21:23
if you're not using any of the openAPS tools, just inspired by the design, you won't need to fill out the form. you could write an underlying adapter to use oref0 to generate temp basal recommendations and implement with your setup, though. If you end up going that route and are using oref0 or openAPS tools down the line, you can always fill out the form then.
Joakim Ornstedt
@joakimornstedt
Feb 07 2016 21:27
I am not using the openAPS tool but I am using the OpenAPS reference design in an Andriod App that I have created. I'am using OmniPod pump and Dexcom.
Milos Kozak
@MilosKozak
Feb 07 2016 21:28
another one @timomer
Dana Lewis
@danamlewis
Feb 07 2016 21:28
Yup. So, for the "numbers" we are 'tracking' who is using all of the openAPS tools to loop. Lots of other loop implementation options, but not including those in the openAPS "count".
Joakim Ornstedt
@joakimornstedt
Feb 07 2016 21:29
Ok, then I know.
John Males
@johnmales
Feb 07 2016 21:31
As far as lipo batteries go, I’ve ordered this - 2000 mAh, roughly as wide and deep as the intel edison breakout board. I haven’t received it yet though.http://www.ebay.com.au/itm/181289179205
Thomas Emge
@ThomasEmge
Feb 07 2016 21:39
@amazaheri where do I increase the page size? I can't find it in the 10 Home edition. is it set on the bat file or exe file?
Jason Calabrese
@jasoncalabrese
Feb 07 2016 21:40
@joakimornstedt using omnipod?? Didn't think it was decoded yet
@amazaheri or anyone else using an Edison, any guess as to how long it takes to get a full charge of an 850?
Ali Mazaheri
@amazaheri
Feb 07 2016 21:49
didnt check I usually do shutdown -h -P now and let is charge over night
@ThomasEmge added to wiki as well
Control Panel\System and Security\System
Joakim Ornstedt
@joakimornstedt
Feb 07 2016 21:50
@jasoncalabrese I send commands to the OmniPod by "pushing" the PDM buttons and OCR the PDM screen.
@jasoncalabrese: I push the buttons by hard wiring to the PDM PCB and connecting the button "cables" to 7 relays.
Milos Kozak
@MilosKozak
Feb 07 2016 21:54
real hack :)
Joakim Ornstedt
@joakimornstedt
Feb 07 2016 21:55
@jasoncalabrese It is for the night scenario. I have tested my interface to the PDM extensively and it works great. I am now testing the last things in my APS loop and after that I'am up en running. This APS system is for my daughter, 7 years.
@MilosKozak Its real hack but works greate, and I think the only way with OmniPod if you dint completely replace the PDM with your own software
dont completely...
Ben West
@bewest
Feb 07 2016 22:00
interesting approach, @joakimornstedt you're setup could be instrumental in figuring out how to really talk to the device
are there any other pads you can see on the PCB?
with right equipment, should be able to exercise and view how commands are sent from PDM
Dana Lewis
@danamlewis
Feb 07 2016 22:01
:+1:
LadyViktoria
@LadyViktoria
Feb 07 2016 22:02
yes make high resulution pics of the pcbs from both sides :*
Joakim Ornstedt
@joakimornstedt
Feb 07 2016 22:03
Se share-files in the OmniASP slack room @LadyViktoria
LadyViktoria
@LadyViktoria
Feb 07 2016 22:04
how to find
Jason Calabrese
@jasoncalabrese
Feb 07 2016 22:05
Great idea @bewest automate the button pushing while listening
Dana Lewis
@danamlewis
Feb 07 2016 22:05
http://bit.ly/1nTtccH @LadyViktoria @bewest For the omniAPS slack channel
Jason Calabrese
@jasoncalabrese
Feb 07 2016 22:06
@joakimornstedt what's controlling the relays?
Ben West
@bewest
Feb 07 2016 22:06
huh?
Dana Lewis
@danamlewis
Feb 07 2016 22:07
@bewest If you wanted to see the shared files he posted, they're in the OmniAPS slack channel where they've been discussing OmniPod & Animas pump comms
Ben West
@bewest
Feb 07 2016 22:07
oh man
I really cannot deal with slack
Dana Lewis
@danamlewis
Feb 07 2016 22:07
Link above is for how you can add yourself if you so choose
Ben West
@bewest
Feb 07 2016 22:07
it's another inbox, it doesn't merge/integrate with anything
I don't get it
for each of these "teams" you have to set up your profile again?
new picture, etc?
Jason Calabrese
@jasoncalabrese
Feb 07 2016 22:08
I like slack, but they don't have open rooms like gitter right?
Ben West
@bewest
Feb 07 2016 22:08
you can't combine the chat rooms in one thing?
so no chance of looking at omni and openaps in single window
Joakim Ornstedt
@joakimornstedt
Feb 07 2016 22:09
@bewest @jasoncalabrese I have think a about the same ide. I think it's possible to read and understand the RF communication between the PDM and the Pod but i think, I don know, that the PDM and Pod to tightly paird to be abled to send commands to the Pod whiteout "upsetting" the PDM.
Ben West
@bewest
Feb 07 2016 22:09
sorry for rant, ;-) I must not be getting/understanding something
Dana Lewis
@danamlewis
Feb 07 2016 22:09
Correct. They're separate, and they're not public. But they are way better for searching once you're in the channel, and some other features that gitter is missing (like responses). Pros and cons to each.
Ben West
@bewest
Feb 07 2016 22:09
dunno, I grew up on irc/messengers
used to being able to manage all chat from one place
slack itself doesn't do that for chat's in slack itself
Scott Leibrand
@scottleibrand
Feb 07 2016 22:11
you can have multiple teams all configured in the slack app
in OS X it's a single command line shortcut to toggle between them
actually easier than switching gitter rooms
Dana Lewis
@danamlewis
Feb 07 2016 22:12
(I am not trying to convince you, just was attempting to provide context to where those files were located, and a path for anyone interested to get there.)
Joakim Ornstedt
@joakimornstedt
Feb 07 2016 22:12
@bewest An relay PCB bord with Bluetooth.
Scott Leibrand
@scottleibrand
Feb 07 2016 22:12
lol, @danamlewis inadvertently just provided a perfect example of why slack is better than gitter in so many ways
Ben West
@bewest
Feb 07 2016 22:13
ok, so people are using some mobile app
Scott Leibrand
@scottleibrand
Feb 07 2016 22:15
yeah, most of the world uses mobile for most things most of the time nowadays. so much more convenient than being tied to a laptop. even when the mobile app kinda sucks like gitter's
Joakim Ornstedt
@joakimornstedt
Feb 07 2016 22:15
LadyViktoria
@LadyViktoria
Feb 07 2016 22:15
the pdm has a lot of pinouts on the pcb
Joakim Ornstedt
@joakimornstedt
Feb 07 2016 22:16
To big and to loud but it works for this first prototype
And what are the IR port on the PDM for?
Jason Calabrese
@jasoncalabrese
Feb 07 2016 22:18
Can you send temps with the bottom presses?
Scott Leibrand
@scottleibrand
Feb 07 2016 22:19
heh
Jason Calabrese
@jasoncalabrese
Feb 07 2016 22:19
Might be able to wrap it in a way that the rest of OpenAPS would work
Ben West
@bewest
Feb 07 2016 22:21
I don't know anyone who programs using mobile interface ;-)
Joakim Ornstedt
@joakimornstedt
Feb 07 2016 22:21
@jasoncalabrese Yes I can I this week run 500 test after each other sending and cancel temps
Ben West
@bewest
Feb 07 2016 22:22
if all you use is the web interfaces, gitter is much better
size is merely an optimization problem, @joakimornstedt :-D
Scott Leibrand
@scottleibrand
Feb 07 2016 22:24
I have done a fair bit of oref0 programming using ServerAuditor. It's much less efficient than a laptop, but it lets me do things where I would never take a laptop.
particularly useful for real-time monitoring and debugging
Joakim Ornstedt
@joakimornstedt
Feb 07 2016 22:25
@bewest Thas my view to, know I want to get up and running with my ASP system and then I can start to optimize things
Ben West
@bewest
Feb 07 2016 22:26
hmmm, apparently slack can bridge to irc/xmpp if the owner enables it
then I can go back to one app for all chat, apparently gitter fixed some of their irc support
Dana Lewis
@danamlewis
Feb 07 2016 22:26
@bewest Send me a link and I can do that
Ben West
@bewest
Feb 07 2016 22:32
haha, googled for "linux slack gitter" and this came up https://drewdevault.com/2015/11/01/Please-stop-using-slack.html
LadyViktoria
@LadyViktoria
Feb 07 2016 22:33
lol
i there a connection between gitter and irc ?
Ben West
@bewest
Feb 07 2016 22:35
awhile ago they created an irc bridge
at the time I tried it was unusable
but trying it again right now and it seems to work, very happy delete some browser tabs
LadyViktoria
@LadyViktoria
Feb 07 2016 22:36
nice <3
cool its green https://irc.gitter.im/ i like that green
IMG_20160126_080532.jpg
Dana Lewis
@danamlewis
Feb 07 2016 22:43
ah, needs to be done by the primary owner. @pheltzel, can you enable for omniAPS? https://get.slack.help/hc/en-us/articles/201727913-Connecting-to-Slack-over-IRC-and-XMPP
timomer
@timomer
Feb 07 2016 23:16
thanks @MilosKozak, @joakimornstedt checkout HAPP if you have not seen it already, PM if you want to chat, we have two possible pumps in the works to connect to HAPP for closed loop https://github.com/timomer/HAPP
LadyViktoria
@LadyViktoria
Feb 07 2016 23:27
i hope for more pumps. roche would be nice
;)