These are chat archives for nightscout/intend-to-bolus

24th
Mar 2016
Dana Lewis
@danamlewis
Mar 24 2016 00:00
let’s definitely kill gitbooks, try rtd with some more cleanup if possible, and see where it goes. worst case we just revert back to github as before.
Dana Lewis
@danamlewis
Mar 24 2016 00:13
@bewest not ready for merging quite yet..
Ben West
@bewest
Mar 24 2016 00:14
hmm
tazitoo
@tazitoo
Mar 24 2016 00:14
yay - got auto sensitivity set up! Thanks to @scottleibrand for the suggestion and @amazaheri for his write up.
Dana Lewis
@danamlewis
Mar 24 2016 00:15
nice @tazitoo!
tazitoo
@tazitoo
Mar 24 2016 00:15
Also thanks for the hard limit if below threshold in the dev branch!
Scott Leibrand
@scottleibrand
Mar 24 2016 00:15
lots of 404's in openaps/docs master now
need to revert that merge if you can
looks like you moved everything into source but didn't update any links
Dana Lewis
@danamlewis
Mar 24 2016 00:16
eek.
Ben West
@bewest
Mar 24 2016 00:16
updated quite a few links
maybe not all
Scott Leibrand
@scottleibrand
Mar 24 2016 00:16
can we revert and do this in dev?
I'll click the button if no objections
Jason Calabrese
@jasoncalabrese
Mar 24 2016 00:17
reverting a merge always goes bad
Jason Calabrese
@jasoncalabrese
Mar 24 2016 00:17
better to go forward if possible
Ben West
@bewest
Mar 24 2016 00:17
I suggest if there's a broken link, just fix it on dev
Dana Lewis
@danamlewis
Mar 24 2016 00:17
master is broken, though
Ben West
@bewest
Mar 24 2016 00:17
the edit links even work
Scott Leibrand
@scottleibrand
Mar 24 2016 00:18
I'll start fixing https://github.com/openaps/docs master
don't care about RTD at this point
Ben West
@bewest
Mar 24 2016 00:18
please don't change master though
that also breaks the process
work on dev if you can
Scott Leibrand
@scottleibrand
Mar 24 2016 00:18
need to make github work
k
Dana Lewis
@danamlewis
Mar 24 2016 00:18
next time, let’s make sure to do multiple +1s for merging to master for anything big...
Ben West
@bewest
Mar 24 2016 00:18
which links are broke, the summary ones in the readme?
I suggest deleting them
Scott Leibrand
@scottleibrand
Mar 24 2016 00:18
no
Dana Lewis
@danamlewis
Mar 24 2016 00:18
we still need them for people who navigate to github
not everyone will end up in RTD, just like not everyone went to gitbooks
Ben West
@bewest
Mar 24 2016 00:24
@scottleibrand the links usually go from docs/Resources/ to ../
the links are relative from "here" not from the project root
that actually makes it work on github better
Scott Leibrand
@scottleibrand
Mar 24 2016 00:25
you moved a frick-ton of stuff didn't you?
Ben West
@bewest
Mar 24 2016 00:26
ah, that's the README that's fine
Scott Leibrand
@scottleibrand
Mar 24 2016 00:27
no, it's not fine, until we manually fix links to everything you moved
Scott Leibrand
@scottleibrand
Mar 24 2016 00:33
we probably should replace the navigation links with something from RTD
since the structure is different now
Ben West
@bewest
Mar 24 2016 00:33
should be dandy
if there's any more links let me know, it was mainly the README I ignored
Scott Leibrand
@scottleibrand
Mar 24 2016 00:35
all of the leaf-level links in the readme are still broken
Ben West
@bewest
Mar 24 2016 00:35
why not eliminate them?
there's a big proposal on the table anywayy
Scott Leibrand
@scottleibrand
Mar 24 2016 00:35
I think we should, but we need to replace them with links to the actual content
Ben West
@bewest
Mar 24 2016 00:35
why not just delete them I'm saying
Dana Lewis
@danamlewis
Mar 24 2016 00:35
we need a basic TOC in the github read for people to use and nav through the content
it needs to work until we do the big change
Ben West
@bewest
Mar 24 2016 00:35
you'll have to do it all over again when you change it again
Dana Lewis
@danamlewis
Mar 24 2016 00:35
yes
Scott Leibrand
@scottleibrand
Mar 24 2016 00:36
basically I'd like to do is embed a copy of http://openaps.readthedocs.org/en/dev/ in the readme somehow
Ben West
@bewest
Mar 24 2016 00:36
that's a waste, let a tool do the work
don't waste your time doing things computers do better
Dana Lewis
@danamlewis
Mar 24 2016 00:36
so, have the computer put a TOC in there. but it needs to be in there.
Scott Leibrand
@scottleibrand
Mar 24 2016 00:36
if someone navigates to the README, they need obvious links to follow
Dana Lewis
@danamlewis
Mar 24 2016 00:36
the computer won’t answer questions when people are massively confused, though
so that’s what we trying to solve for. we know this is an issue without the TOC type links in github
Scott Leibrand
@scottleibrand
Mar 24 2016 00:36
we have the overview ones, but nothing to the walkthrough contents
Ben West
@bewest
Mar 24 2016 00:37
don't maintain duplicate content, please
Scott Leibrand
@scottleibrand
Mar 24 2016 00:37
need a way to navigate around within github
and a way to maintain those links without all this manual effort
Ben West
@bewest
Mar 24 2016 00:38
that's what rtd is for
Scott Leibrand
@scottleibrand
Mar 24 2016 00:38
don't want to force everyone to use the RTD interface if they don't want to
Ben West
@bewest
Mar 24 2016 00:38
github is not for this
I usually don't say that...
but github is not for consuming documents
Bill Stackpole
@billstackpole
Mar 24 2016 00:38
not RTD enabled - can you point me to the interface?
link?
Scott Leibrand
@scottleibrand
Mar 24 2016 00:38
we've been burned before, relying on gitbooks the way you're proposing we rely on RTD
Dana Lewis
@danamlewis
Mar 24 2016 00:39
so, this is why discussion on PRs is good, so we can discuss this before making the big changes and being in the situation of having github being broken and not being ready to point to RTD as the primary source.
Ben West
@bewest
Mar 24 2016 00:39
yes, gitbook was an experiment
I was wary since it was just the one dude
Dana Lewis
@danamlewis
Mar 24 2016 00:39
RTD is also an experiment. need Github to still be main source of truth.
Ben West
@bewest
Mar 24 2016 00:39
and indeed it fell over
RTD is no experiment :-)
github is not for reading manuals and guides
great for maintaining them, but you get no navigation like a guide needs
Dana Lewis
@danamlewis
Mar 24 2016 00:42
I think we are in agreement - better nav is nice/would be needed. But, we need a base working copy of the content of the docs somewhere. that somewhere is Github for now.
Scott Leibrand
@scottleibrand
Mar 24 2016 00:42
the other thing is: how do you find a doc to edit it?
Jim Matheson
@jmatheson
Mar 24 2016 00:42
Bummer that Phife Dawg did not take care of his T1D.
Scott Leibrand
@scottleibrand
Mar 24 2016 00:42
if github has no navigation
Ben West
@bewest
Mar 24 2016 00:44
github is not for reading/consuming
blob
it might have been clear to you
Dana Lewis
@danamlewis
Mar 24 2016 00:50
@jmatheson is that the cause of death?
Jim Matheson
@jmatheson
Mar 24 2016 00:51
sounded like it. well complications over years of bad decisions and lack of control.
i did not see what the actual cause of death was. just that it was related to complications.
Scott Leibrand
@scottleibrand
Mar 24 2016 00:52
ok, openaps/docs#104 for :+1: and then @danamlewis to merge
Ben West
@bewest
Mar 24 2016 00:52
looks good
FWIW, when I was looking through, there were tons of broken links/images before I touched it
Scott Leibrand
@scottleibrand
Mar 24 2016 00:54
not sure who renamed all the subdirectories of https://github.com/openaps/docs/tree/master/source/docs, but that's what broke them in a non-easily-fixable way
I think that is a better structure, but we weren't ready to merge it
Dana Lewis
@danamlewis
Mar 24 2016 00:57
I merged with a note about next steps.
Scott Leibrand
@scottleibrand
Mar 24 2016 00:58
question on RTD: can we make a view that doesn't display 5 levels deep, and/or that hides the numbers on deeper levels?
Ben West
@bewest
Mar 24 2016 00:59
probably
lots of options in sphinx
the index.rst files control most things through the toctree
the master/root doc has it set to 4
api is actually hidden as an example
Scott Leibrand
@scottleibrand
Mar 24 2016 01:01
looks like it might have the option to generate index.md files and put them into github? It links to such files, but they don't exist
Ben West
@bewest
Mar 24 2016 01:01
hmm, where's the from?
index.md was another route I played with
bottom right links, expand, then "On GitHub View Edit"
Ben West
@bewest
Mar 24 2016 01:02
ah, that's funny
the md ones work but not the rst ones
hehe
index.md and index.rst will fight in not good ways, the link is funny for some reason, I'll take a look at some point
I'm using a plugin that allows us to continue using markdown files
Dana Lewis
@danamlewis
Mar 24 2016 01:08
ok. please don’t merge a PR to master though without a second review? Had someone asking about broken links in the time period it took us to fix.
I just re-forked and checked out dev to work on mapping the content for the next gen version
@jmatheson sad either way :/
looking forward to when there’s no more diabetes complications
Jim Matheson
@jmatheson
Mar 24 2016 01:11
yea :(
Scott Leibrand
@scottleibrand
Mar 24 2016 01:12
how do I access a RTD view of a new branch? http://openaps.readthedocs.org/en/sml-working/ doesn't exist
rafaelmatuk
@rafaelmatuk
Mar 24 2016 01:14
Hi guys, another "quick" question: I had a battery failure and now I am having GIT corruption again. I tried to run oref0-fix-git-corruption.sh (it has worked in the past), but appears that the corruption is cyclical, as the scripts goes on and on through the same object. Any ideas to fix the git corruption?
Scott Leibrand
@scottleibrand
Mar 24 2016 01:15
Probably can't. Just oref0-reset-git
Ben West
@bewest
Mar 24 2016 01:21
ah, new branches need to be enabled once
rafaelmatuk
@rafaelmatuk
Mar 24 2016 01:22
that worked . Thanks Scott. I am close to start formal closed loop: cron works, retry-loop works, NS works, medtronics 722 works with the dexcom G4. One more question: the carelink range seems really spotty at times. Any experience with the TI RF dongle? or rileylink?
Scott Leibrand
@scottleibrand
Mar 24 2016 01:22
much better range with those
Dana Lewis
@danamlewis
Mar 24 2016 01:22
@rafaelmatuk TI is much improved over carelink.
but, it’s easier for a lot of people to get the loop running with carelink before switching to TI.
Scott Leibrand
@scottleibrand
Mar 24 2016 01:22
@bewest who has perms to add branches? and how?
rafaelmatuk
@rafaelmatuk
Mar 24 2016 01:22
ok, thanks!
Dana Lewis
@danamlewis
Mar 24 2016 01:23
:+1:
Ben West
@bewest
Mar 24 2016 01:23
blob
get an account there, I can add you as maintainer
Scott Leibrand
@scottleibrand
Mar 24 2016 01:23
k
Ben West
@bewest
Mar 24 2016 01:24
enabled that branch as active
Scott Leibrand
@scottleibrand
Mar 24 2016 01:24
thx. will do the account later: have to leave momentarily
ok
btw, download the PDF sometime and try clicking on the internal links :-)
garykidd
@garykidd
Mar 24 2016 01:47
wheres .pdf?
Dan Piessens
@dpiessens
Mar 24 2016 02:09
Hi All, I just got a full loop running for 24 hours! Not sure when I officially get counted, but I'm hooked. :)
Dana Lewis
@danamlewis
Mar 24 2016 02:10
congrats @dpiessens ! You need three consecutive nights with no major failures to feel confident that you’re looping. then make sure to share your info via this step: https://github.com/openaps/docs/blob/master/source/docs/walkthrough/phase-3/keeping-up-to-date.md
Dan Piessens
@dpiessens
Mar 24 2016 02:13
Thanks! I still want to tweak the retry loop and I hacked the Dexcom repo for G5. I'm working on making that code conditional for the firmware header. One question, has anyone used the loop to upload CGM data to nightscout? I've been dead in the water with that since my G5 update, and this would be a decent workaround
Dana Lewis
@danamlewis
Mar 24 2016 02:14
Yup, many of us are sending data to NS and then pulling that into the loop. Or if you mean from Pi to NS, that’s also happening, too
@loudnate has some G5 tools: https://github.com/loudnate/xDripG5
Dan Piessens
@dpiessens
Mar 24 2016 02:14
yeah Pi to NS
oh cool thank @danamlewis
Ah, saw that repo, I'm a die-hard Android guy, downside of being a developer for too many years... strong tech bais :)
Dana Lewis
@danamlewis
Mar 24 2016 02:16
heh. you might change your mind seeing as he also has an ios version to ditch the Pi for the loop ;) or not. either way, lots of options on all fronts!
Dan Piessens
@dpiessens
Mar 24 2016 02:20
Yeah, actually looking and the docs thread above, it would be great to figure out a good way to document the various configurations and associated reference setup. I'd be happy to help with that or at least contribute my setup
Dana Lewis
@danamlewis
Mar 24 2016 02:20
that’d be great.
I’m working on a major restructure, so if you want to wait for that to come up, it’ll be a great place to add various hardware configuration and links to alternative setups.
there will also be a bunch of gaps and holes where we need contributions in other places, too :)
Dan Piessens
@dpiessens
Mar 24 2016 02:22
sure that will give me time to tinker, does @loudnate have a public implementation of the ios loop?
Dana Lewis
@danamlewis
Mar 24 2016 02:22
here’s @loudnate’s “LoopKit”: https://github.com/loudnate/loopkit
Dan Piessens
@dpiessens
Mar 24 2016 02:25
nice, looks interesting
Iain
@iainct
Mar 24 2016 04:11
@dpiessens I am following closely behind you, G5-> Nightscout I am almost complete with phase 1 of the docs, Android only in my house so when you figure it out please share and I will replicate :-)
Dana Lewis
@danamlewis
Mar 24 2016 04:14
:)
Dana Lewis
@danamlewis
Mar 24 2016 05:04
17 minutes and counting for an RTD build :/
Ben West
@bewest
Mar 24 2016 06:50
hmm?
I don't see any changes for it to build?
@danamlewis which build are you waiting for?
Dana Lewis
@danamlewis
Mar 24 2016 06:55
I was trying to do my dev branch but gave up
Ben West
@bewest
Mar 24 2016 06:55
ah, did you sign up for an account on readthedocs?
since it's your fork, you need your own account on readthedocs to set it up
btw, yes, the Makefile and other files are needed
curious why deleting the index.rst's?
yours won't build anymore
Dana Lewis
@danamlewis
Mar 24 2016 07:01
Yes, I signed up, but couldn't get it to build after half an hour of trying. At that point I started deleting the surplus files to make sure I had all the content reorganized and added, figuring we can re-so the .rst's to it later
Ben West
@bewest
Mar 24 2016 07:05
I see
I'll setup a mirror of your dev branch
Ben West
@bewest
Mar 24 2016 07:29
which should come first in phase 5 and 6?
for phase 5 is it considerations, beyond-low-glucose-suspend, tuning-targets?
Dana Lewis
@danamlewis
Mar 24 2016 07:29
Yes
Ben West
@bewest
Mar 24 2016 07:39
here's with building again, the toctrees need to be updated to include the new stuff
eszcloud
@eszcloud
Mar 24 2016 08:03
Just started getting an error with my loop:
munge://JSON/normalize/normalize_history.json
normalize_history.json  raised
Traceback (most recent call last):
  File "/usr/local/bin/openaps-report", line 6, in <module>
    exec(compile(open(__file__).read(), __file__, 'exec'))
  File "/home/pi/openaps/bin/openaps-report", line 82, in <module>
    app( )
  File "/home/pi/openaps/openaps/cli/__init__.py", line 44, in __call__
    self.run(self.args)
  File "/home/pi/openaps/bin/openaps-report", line 75, in run
    output = app(args, self)
  File "/home/pi/openaps/openaps/cli/subcommand.py", line 52, in __call__
    return self.method.main(args, app)
  File "/home/pi/openaps/openaps/reports/invoke.py", line 40, in main
    output = task.method(args, app)
  File "/home/pi/openaps/openaps/uses/use.py", line 45, in __call__
    output = self.main(args, app)
  File "/usr/local/lib/python2.7/dist-packages/openapscontrib.mmhistorytools-0.1.1-py2.7.egg/openapscontrib/mmhistorytools/__init__.py", line 297, in main
    tool = NormalizeRecords(*args, **kwargs)
  File "/usr/local/lib/python2.7/dist-packages/openapscontrib.mmhistorytools-0.1.1-py2.7.egg/openapscontrib/mmhistorytools/historytools.py", line 440, in __init__
    self.add_history_event(event)
  File "/usr/local/lib/python2.7/dist-packages/openapscontrib.mmhistorytools-0.1.1-py2.7.egg/openapscontrib/mmhistorytools/historytools.py", line 451, in add_history_event
    decoded = getattr(self, "_decode_{}".format(event["type"].lower()))(event)
  File "/usr/local/lib/python2.7/dist-packages/openapscontrib.mmhistorytools-0.1.1-py2.7.egg/openapscontrib/mmhistorytools/historytools.py", line 583, in _decode_tempbasal
    **{adjustment: event["amount"]}
  File "/usr/local/lib/python2.7/dist-packages/openapscontrib.mmhistorytools-0.1.1-py2.7.egg/openapscontrib/mmhistorytools/historytools.py", line 531, in _basal_adjustments_in_range
    description=description
  File "/usr/local/lib/python2.7/dist-packages/openapscontrib.mmhistorytools-0.1.1-py2.7.egg/openapscontrib/mmhistorytools/historytools.py", line 510, in _basal_adjustments_in_range
    assert (start_datetime < end_datetime)
AssertionError
Ben West
@bewest
Mar 24 2016 08:14
o_0
hmm, wonder what's going into that report
eszcloud
@eszcloud
Mar 24 2016 08:19
It's part of cleaning up the data with mmhistory tools
Loop had been running fine and then suddenly started throwing this error
```
[report "normalize_history.json"]
device = munge
infile = resolve_history.json
use = normalize
basal_profile = read_selected_basal_profile.json
reporter = JSON
benhamou
@benhamou
Mar 24 2016 08:49
hello my friends this page doesnt work anymore :-(
Julia Schober
@julza78
Mar 24 2016 08:51
Oh no, i wantet to work on it on the weekend😯
benhamou
@benhamou
Mar 24 2016 08:51
this smart ppl here will fix it I guess
Scott Leibrand
@scottleibrand
Mar 24 2016 09:00
Gitbooks is being deprecated. You'll need to follow the main github.com/openaps/docs links. That readthedocs link you posted is a new branch Ben and Dana are working on, but there are similar links to the current version.
If there is still anything pointing to gitbooks, please let us know so we can update it.
benhamou
@benhamou
Mar 24 2016 09:01
roger
I am reading the new version, much better :-)
one question I have the 712 medtronic together with this static json is it equal to 722. as the 712 doesnt have current active insulin. or does it make sense to seek for a 722 with VER2.6
Scott Leibrand
@scottleibrand
Mar 24 2016 09:06
The 712 also doesn't report carbs, so you can't use meal assist.
benhamou
@benhamou
Mar 24 2016 09:06
I mean will my https://gist.github.com/amazaheri/033b85760156054dd858 compensate fully for not bein 722?
oh thats a pitty
Scott Leibrand
@scottleibrand
Mar 24 2016 09:06
It can do basic overnight loop, but isn't as good for daytime.
benhamou
@benhamou
Mar 24 2016 09:07
well I will start with night anyway :-) but my next step will be daytime. I think I need another pump, may you recommend one?
dana?
Scott Leibrand
@scottleibrand
Mar 24 2016 09:10
The DanaR works with phone apps like HAPP rather than with openaps toolset. It's not fully documented yet either, but a couple people are looping with it. 722 or 715 are best for using openaps/oref0.
benhamou
@benhamou
Mar 24 2016 09:36
any other pumps you may recommend which are purchasable?
Scott Leibrand
@scottleibrand
Mar 24 2016 09:38
Only other one that anyone has looped with so far is the Animas Ping. It's not capable of temp basals, though, so the OpenAPS passive safety approach can't be used with it.
There are people working on the Omnipod, but dunno if/when they might figure it out. DanaR is probably the best bet in the short term of pumps you can buy new (outside the US).
benhamou
@benhamou
Mar 24 2016 09:43
ok thank you
Ben West
@bewest
Mar 24 2016 10:11
saw ton of people using gitbooks at the meetup
rtd came in quite handy, the search function is awesome
benhamou
@benhamou
Mar 24 2016 10:15
may someone tell me how to get from nightscout my data to the raspberry?
data from nightscout to raspberry, sorry for poor english
what does rtd mean
do I have to do all steps before, do I have to alter this script in which folder do I have to copy it to?
my nightscout adrees is my azurewebsite... right?
Ben West
@bewest
Mar 24 2016 10:37
yeah, the azurewebsite address
Bill Stackpole
@billstackpole
Mar 24 2016 13:59
@bewest - is the "DEVICESTATUS_ADVANCED" setting in Azure "custom" or "SQL Database"? (expecting custom, but not specified in docs). Tnx
Dan Piessens
@dpiessens
Mar 24 2016 14:01
Actually that should be in the App Settings section
at least that's where I have it
Bill Stackpole
@billstackpole
Mar 24 2016 14:02
right - got that, just need to know what the third parameter is (all others are "custom")
at least on azure...
Dan Piessens
@dpiessens
Mar 24 2016 14:03
So within that blade (section) there's two groups, the setting actually goes in the group above connection strings called app settings
Bill Stackpole
@billstackpole
Mar 24 2016 14:03
Oh - not connection strings?
K
tnx
I'll adjust
Dan Piessens
@dpiessens
Mar 24 2016 14:05
blob
Make sure to click the restart button on the site after you update the settings
Bill Stackpole
@billstackpole
Mar 24 2016 14:06
think I only see "save" - where "restart"?
(and tnx for the direction)
Dan Piessens
@dpiessens
Mar 24 2016 14:06
sure :), click save on that blade, then on the main web application blade there's a restart button
Bill Stackpole
@billstackpole
Mar 24 2016 14:07
found it.
tnx
Dan Piessens
@dpiessens
Mar 24 2016 14:07
np
Bill Stackpole
@billstackpole
Mar 24 2016 14:08
sidenote - is there an easy way to backup all settings in Azure? (in case I crash / break / misconfigure and want to recover w/out rebuild from scratch)?
Bill Stackpole
@billstackpole
Mar 24 2016 14:14
whoops - current version of NS is 0.8.4 - need to update (trigger was no update to plugins in NS menu via browser). Site indicates git repo as location for dev version - is there a doc page to indicate how to perform the update?
Bill Stackpole
@billstackpole
Mar 24 2016 14:29
@dpiessens - how did you update your NS site from 0.8x to 0.9x?
azure/webapp/settings/publishing/deployment source shows a single github repot but no options to change branches etc. Should I add a new one?
Scott Leibrand
@scottleibrand
Mar 24 2016 14:33
You can disconnect from github and redo that part. Make sure your fork is up to date first.
Bill Stackpole
@billstackpole
Mar 24 2016 14:33
not sure how to "make sure fork is up to date"...
choose "disconnect" then restart from the "publishing" part of NS imstructinos?
replacing funnel cake version with current dev branch?
(and do you ever sleep?)
benhamou
@benhamou
Mar 24 2016 14:35
@scottleibrand may I either run the script stated at the buttom of: http://bewest-openaps-docs.readthedocs.org/en/bewest-dev-w-dana/docs/walkthrough/phase-1/visualization.html#nightscout-setup or do every step mentioned before. If I run the script into which folder do I have to copy it?
@scottleibrand do u ever sleep are you sitting in the US
Bill Stackpole
@billstackpole
Mar 24 2016 14:40
wait - think I got it. One more q: should I FORK the repo and deploy from my fork of dev? or should I deploy from the source dev?
Bill Stackpole
@billstackpole
Mar 24 2016 14:45
Here's my workflow so far to update to dev branch of NS and support Visualization and Monitoring: 1 - connect to Azure. 2 - navigate to "settings / publishing / deployment source" 3 - select the git repo in the blade that opens for deployment source 4 - at top of page select "disconnect" 5 - be sure to be logged into github 6 - wait 7 - reselect "deployment source" 8 - in blade that opens, select github as the source. (Each element to be configured will note "Configure required settings"). 8 - choose project "cgm-remote-monitor" 9 - choose branch "dev" 10 - select OK in deployments blade - wait for fetch / sync / etc. (currently "building" so on hold)
Bill Stackpole
@billstackpole
Mar 24 2016 14:57
11 - after build complete, go back to blade for nightscout deployment, select "restart" at top of page, then reload your target nightscout page (https://<yoursite>.azurewebsites.net) and reset settings per configuration site. Woop!
Britta
@Surferin
Mar 24 2016 15:09
Last week we talked a little bit about the up- and downregulation of insulin receptors and the relation to the insulin we inject. I searched a little bit on the Net for articles which describe this phenomenon. I hope you find a little bit of explanation in this article.
It's fairly old, from 1974, but till today nothing has changed
Colin Lennon
@colinlennon
Mar 24 2016 15:12
@billstackpole this is the task I'm about to tackle over the next day or so. Thanks for documenting your steps, that will be a big help to me :)
Bill Stackpole
@billstackpole
Mar 24 2016 15:15
have one issue
currently working on updating the pi
and do NOT have an "enacted.json"
can someone inform me of what that should contain?
I have been enacting my suggested.json (which seems to contain the correct settings that I might need) but never created an enacted.json (which is apparently req'd for the monitor/upload-status.json report to enable the integration)
thought?
(s)?
Dana Lewis
@danamlewis
Mar 24 2016 15:21
That should be showing what was actually done on the pump
Bill Stackpole
@billstackpole
Mar 24 2016 15:22
just not sure how to execute. Is this feedback from the pump (saying that the intended action has been enacted) or is it feedback from my device (pi in this case) saying that the instruction to set things up has been SENT?
e.g. if I "openaps enact <dir/file>", but the filename is suggested.json (cause that has the json elements required to enact), can I simply rename that file to enacted.json?
(cause it will have been the enacted file?)
Dana Lewis
@danamlewis
Mar 24 2016 15:24
The former - feedback from the pump
Bill Stackpole
@billstackpole
Mar 24 2016 15:25
K - so should I read the data from the pump after enacting to be sure of my current settings? (have been looking visually at the open circle and manually navigating thru the menus - yuck)
(to ensure the temp basal is being set appropriately)
Dana Lewis
@danamlewis
Mar 24 2016 15:25
Ew yea don't do that :)
You should definitely be reading via the system to confirm what was enacted
(But a quicker hack if you are looking on the pump is to hit the back button and read off the status menu)
Bill Stackpole
@billstackpole
Mar 24 2016 15:27
and generating an enacted.json from the settings on the pump? How will / should I manage the timestamp for the last setting? (e.g. if I read from the pump should I generate a json file with the temp basal setting, current time, remaining temp basal time, etc?)
Scott Leibrand
@scottleibrand
Mar 24 2016 15:27
Sounds like you're enacting incorrectly. Are you doing use to enact?
You instead need to set up a report.
Bill Stackpole
@billstackpole
Mar 24 2016 15:28
think so. lemme look...
so Im using a "loop" report...
whoops - loop alias
loop ! bash -c "openaps monitor-cgm 2>/dev/null && echo -n R && ( openaps preflight && echo -n e && openaps gather-profile && echo -n f && openaps monitor-pump && echo -n r && openaps monitor-cgm && echo -n es && openaps glucosecleaner && echo -n h && openaps checkiob && echo -n ed && openaps suggest && echo -n ' wo' && openaps enact && echo -n 'ot!') || echo Something failed."`
where "enact" is
enact use pump set_temp_basal enact/suggested.json
Dana Lewis
@danamlewis
Mar 24 2016 15:30
Different things :)
You need a report to store the info
Bill Stackpole
@billstackpole
Mar 24 2016 15:31
which info - the content of suggested.json
?
or the three elements that enact requires extracted from suggested.json?
(i'm amused that Im doing it wrong <smile>)
story of my life right? :smile:
Scott Leibrand
@scottleibrand
Mar 24 2016 16:03
You need to create an enact/enacted.json report that runs set_temp_basal.
And then you'll replace the contents of your enact alias with openaps report invoke enact/enacted.json
Colin Lennon
@colinlennon
Mar 24 2016 16:54
I mentioned a few days back that I had hit an issue when using mmol/L units on my 722. The high/low bg targets I had set on the pump were 7.0 and 6.6 respectively but I found that this was being interpreted as 70 and 66. @ps2 thought it might be a pre-existing bug in decocare.
I just want to flag this up in case I should be doing something like raising a bug formally? I've switched to using mg/dL everywhere for now so it isn't a blocker for me, but slightly concerned someone else in the UK could hit the same issue and not spot it
Jim Matheson
@jmatheson
Mar 24 2016 16:55
Anyone up for a London based meetup on April 10, 11 or 12? @oskarpearson @cjo20 @JonnyRox @timomer @SuicidalTissue @oceantragic
Scott Leibrand
@scottleibrand
Mar 24 2016 17:00
OpenAPS.org outage is due to DigitalOcean DNS outage, which they're blaming on a DoS attack.
Getting on a plane, so not gonna try to work around it: hopefully should be fixed by the time we land.
Dana Lewis
@danamlewis
Mar 24 2016 17:05
@colinlennon this has been noticed before. Not sure offhand and from my phone what the workaround solution is, but someone else should be able to chime in and point it out.
timomer
@timomer
Mar 24 2016 17:05
@jmatheson yep, all them dates work for me right now. FYI I'm at this event on the 9th April https://mobilemedicaldeviceresearch.wordpress.com/recruiting-for-diy-diabetes-workshop/
Dana Lewis
@danamlewis
Mar 24 2016 17:05
I would love to have it added to the docs, if someone wants to save whatever the convo points to the solution is and dump it in somewhere.
Colin Lennon
@colinlennon
Mar 24 2016 17:06
thanks @danamlewis
Did you have knowledge of this event and presentation of OpenAPS?
Dana Lewis
@danamlewis
Mar 24 2016 17:10
Yup! @channemann is one of the early loopers :)
Britta
@Surferin
Mar 24 2016 17:14
@danamlewis do you know where the presentation in PDF or HTML is? Is it possible to receive the papers? It's sometimes not too good to read or listen to
Dana Lewis
@danamlewis
Mar 24 2016 17:15
I can't remember offhand where he posted his deck, but I bet he'd be willing to share it again. ::bat signal for @channemann when he has a free moment::
Britta
@Surferin
Mar 24 2016 17:15
oh, that would be great! Thanks!
Dana Lewis
@danamlewis
Mar 24 2016 17:20
Just a note - when I land (or if I have wifi in flight), I'll put in the PR to the dev branch of docs, including notes about what needs to be fleshed out more. (Basically, Keep in mind if you are looking at any of the Dana-dev or Ben-and-Dana-dev branches that it's got new content that hasn't been thoroughly reviewed in the meantime.)
Jim Matheson
@jmatheson
Mar 24 2016 17:25
@timomer nice. I think Aisling mentioned that to met as well. I don’t think I will be able to tie up that much time but I was thinking about trying to stop by the happy hour after. If others are going we could try to just do the meetup @ the pub. Would also depend if people wanted to do some hacking on things.
Chris Hannemann
@channemann
Mar 24 2016 17:27
@danamlewis bat signal received; @Surferin the slide deck is up at http://www.slideshare.net/amytenderich/diabetesmine-ddata-exchange-fall-2015-chris-hannemann-on-openaps (Amy posted all of the decks from D-Data there)
Britta
@Surferin
Mar 24 2016 17:28
Thanks a lot @channemann !
Dana Lewis
@danamlewis
Mar 24 2016 17:29
:+1:
Chris Hannemann
@channemann
Mar 24 2016 17:29
Happy to help
timomer
@timomer
Mar 24 2016 17:29
@jmatheson yep will be an interesting event, I'm giving a quick talk at the start, I'm excited to hear the groups ideas. I think it's deff worth having a separate event still, even if you can make this
@danamlewis when do you plan to be in London this year?
Jim Matheson
@jmatheson
Mar 24 2016 17:29
sounds great
Dana Lewis
@danamlewis
Mar 24 2016 17:35
@timomer may 25-26 :) i am free both evenings for a meetup so need to create a poll to see what works best for ppl
I did book my flights, so those dates are certain
timomer
@timomer
Mar 24 2016 17:40
@danamlewis OK great, I have booked both days in the diary. ;) I can give you a hand finding a space if you want, should be able to pull in some favours if you want something more than a pub (meeting space, etc)
Jim Matheson
@jmatheson
Mar 24 2016 17:41
Speaking of polls…… http://doodle.com/poll/7g3ew4qa64kdyyr5 let us know your availability for April 10-12 @oskarpearson @cjo20 @JonnyRox @timomer @SuicidalTissue @oceantragic
Dana Lewis
@danamlewis
Mar 24 2016 17:44
That would be awesome, thanks @timomer and I know others have offered to help, too - ya'll are awesome :)
Jon Hughes
@JonnyRox
Mar 24 2016 18:09
@jmatheson Yep either of those days. I'll make sure I'm free whatever. I need to
set up some notifications here so I can see when I'm tagged.
Mark Wilson
@mddub
Mar 24 2016 18:35
openaps meetup 2.jpg
had a great meetup last night: those are 9 pumps, all looping
Dana Lewis
@danamlewis
Mar 24 2016 18:35
:)
Stephan
@MosiGitHub
Mar 24 2016 18:36
@jmatheson that was a shame that I missed it :worried:
Ben West
@bewest
Mar 24 2016 18:36
:-D
Eric Luhrs
@eluhrs
Mar 24 2016 18:36
One more reason I wish I lived in SF. One of many....
Chris Hannemann
@channemann
Mar 24 2016 18:38
That's the medtronic advertisement shot
Eric Luhrs
@eluhrs
Mar 24 2016 18:38
Are there any NYC-area people here? I don't live there myself, but it's an easy commute. Would be great to meet up with others.
Stephan
@MosiGitHub
Mar 24 2016 18:39
but only for very old pumps :-P
Ben West
@bewest
Mar 24 2016 18:40
I think we've seen several NYC area people
maybe one of them was you and I'm double counting though
was thinking maybe meetup.com would be good for us to do local groups?
Eric Luhrs
@eluhrs
Mar 24 2016 18:40
Ha! I'll be on the lookout. Would love to see a map of our distribution...
I've got a hardware question. I'm starting to plan for an Edison rig and I'm trying to decide between the Sparkfun base block and the Intel breakout board.
@oskarpearson mentions on his wiki that he intends to use the Intel board for future dev work. But I'm not sure why since it is (only slightly) bigger.
Also, the Intel charger doesn't seem capible of mantaining a larger li ion or lipo battery.
Dana Lewis
@danamlewis
Mar 24 2016 18:44
@eluhrs where are you based? We'll be in Boston next weekend :)
Eric Luhrs
@eluhrs
Mar 24 2016 18:45
My question: can the ti USB be run from either of the two USB ports on the Intel? Or is the left one for console only?
Ben West
@bewest
Mar 24 2016 18:46
ah, so for intel edison, it has two usb ports
the intel breakout board vs the sparkfun breakout board: both have a console and an OTG usb ports
so two usb ports
Eric Luhrs
@eluhrs
Mar 24 2016 18:46
If the ti cc1111 stick can run from either port, I might sacrifice one and solder a better charger in place.
Ben West
@bewest
Mar 24 2016 18:46
only difference there is the position is reverse (left/right)
the console usb port can only be used to get console access
Stephan
@MosiGitHub
Mar 24 2016 18:47
the intel brakout board has only one usb that supports otg
Eric Luhrs
@eluhrs
Mar 24 2016 18:47
Okay, so the console USB in both cases can be used for standard USB attachments too?
Ben West
@bewest
Mar 24 2016 18:47
the otg port is the only one that can be used
Eric Luhrs
@eluhrs
Mar 24 2016 18:47
Oh, nevermind. Just read your comment above.
Ben West
@bewest
Mar 24 2016 18:47
in both cases you need an OTG usb cable to get it to work, as well
Stephan
@MosiGitHub
Mar 24 2016 18:48
the problem is if you connect the ti stick via usb to the intel Breakout board you need to connect extrenal power to j21
Eric Luhrs
@eluhrs
Mar 24 2016 18:48
So I guess I can remove the console usb to get power connections for a better charger...
Ben West
@bewest
Mar 24 2016 18:48
in terms of approachability...
edison sparkfun rig
gah
Stephan
@MosiGitHub
Mar 24 2016 18:49
with the sparkfun board you can use the other usb to power the edison - that is at least what the wiki shows ... I only have two edisons with the intel board and desided to solder the TI stick serial because of this problem
Ben West
@bewest
Mar 24 2016 18:49
console port can be used to power the edison, yup
so you can plug usb battery into the console port
and it works
in terms of making it better, we want to integrate the power supply inside the case, so we'll need to add lipo charging mechanism at some point
a few people are working on hardware modules, hopefully to combine the cc1111 and the charging module onto a single board
hopefully with a 70 pin connector that can snap onto edison :-D
the port on the bottom there is the otg port
so little otg cable goes to the ti usb
Eric Luhrs
@eluhrs
Mar 24 2016 18:58
Sorry, someone just stopped by my office.
Thanks, @bewest, @MosiGitHub. This was helpful. I'd be interesting in a group buy for a custom board. This stuff is so addictive....
@danamlewis I'm in Pennsylvania, but right on the boarder with NJ. About 90 minutes into NYC.
Stephan
@MosiGitHub
Mar 24 2016 19:01
if you want to make it via usb I wouldn't buy the intel board because it doesn't work with powering via microUSB and using the TI stick via USB. If you like to solder it is really nice and you can make very small setups (same size as 522)
Eric Luhrs
@eluhrs
Mar 24 2016 19:03
I don't mind soldering. I want to make this as small as possible. I think there should be a website called "Diabetic Daily Carry." Now with the RPi, I feel like I need a utility belt....
I saw some nice 3d printed case designs for an OpenAPS/Edison rig. Need to examine to see if they fit the breakout board.
Eric Luhrs
@eluhrs
Mar 24 2016 19:08
@bewest how does console access work over USB? can you just point a terminal program at it? Didn't even know serial console could be run over USB until I started reading about the Edison...
Ben West
@bewest
Mar 24 2016 19:13
yes, you can run minicom, miniterm, screen on it
Eric Luhrs
@eluhrs
Mar 24 2016 19:14
Thx. These Edisons seem really well thought out.
Ben West
@bewest
Mar 24 2016 19:16
everything has it's warts
;-)
Eric Luhrs
@eluhrs
Mar 24 2016 19:17
Still, it's pretty amazing what they pack onto these tiny SoCs. Much better than the stuff I grew up with. :smile:
Is it difficult to keep the OS and installed software under 4gb?
I'm not at all familiar with that linux distro
Milos Kozak
@MilosKozak
Mar 24 2016 19:40
nightscout/cgm-remote-monitor#1555 OpenAPS support in reports ...... any tester available?
Dana Lewis
@danamlewis
Mar 24 2016 19:40
I can test later today @MilosKozak
Matthias
@ceben80
Mar 24 2016 19:49
@MilosKozak what test? What can I do? :wink:
Milos Kozak
@MilosKozak
Mar 24 2016 19:58
well not so easy if you don't run own server. you need to merge my branch to your and deploy it ;)
Dana Lewis
@danamlewis
Mar 24 2016 20:00
On phone so can't tell, does it include netiob totals in reports in this version?
Milos Kozak
@MilosKozak
Mar 24 2016 20:03
it shows suggested in tooltip on bg readings
Eric Luhrs
@eluhrs
Mar 24 2016 20:37
with the sparkfun board you can use the other usb to power the edison - that is at least what the wiki shows ... I only have two edisons with the intel board and desided to solder the TI stick serial because of this problem @MosiGitHub, have been thinking about this, and it seems like a good solution. Can you give me some more specifics about what you soldered where, and perhaps a photo?
Stephan
@MosiGitHub
Mar 24 2016 20:39
certainly... I will send it to you, but just for information: such photos are in the Mmeowlink gitter chanel as well...Maybe we should change to this
Eric Luhrs
@eluhrs
Mar 24 2016 20:40
Ah... Okay. Will join that channel too. Thanks.
Jon Hughes
@JonnyRox
Mar 24 2016 21:16
Ok, Thursday night and bank holiday tomorrow in the UK, so I've got the evening to go through a bit more of this. I'm doing a v.1 with a Pi and once I'm confident with it I'll do a v.2 with an Edison. My Pi 3 turned up in the post today and if I can get a power supply for it over the weekend I'll hopefully be able to boot it up and get it connected to my wifi and get a feel for how it works. I need to get t'other half a CGM next. @bewest Ben, was it you who suggested to get a G4 transmitter from a German site for around €400 but to skip the receiver? I've had a chat with Sophie and we're thinking that since it's at least two months, probably closer to 3-4 before I have an APS up and running, that she'll be able to make use of the CGM in that time for general sugars monitoring.
John Sjolund
@sjolundjohn
Mar 24 2016 21:19

Hi everybody, about to start this journey - very fun to see the activity and the dedicated group.

John Sjölund - T1 for 30 years, live in Stockholm Sweden.

Dana Lewis
@danamlewis
Mar 24 2016 21:20
welcome @sjolundjohn!
John Sjolund
@sjolundjohn
Mar 24 2016 21:20
Got all (I think) gear sorted today, so about to start the journey and see how far I get
Britta
@Surferin
Mar 24 2016 21:21
@JonnyRox do you think about getting a Dexcom G4 transmitter and work with that xdrip and the xDrip App?
Jon Hughes
@JonnyRox
Mar 24 2016 21:21
Hello @sjolundjohn I've just got started too.
Peter Miller
@ochenmiller
Mar 24 2016 21:21
TI CC1111 arrived today! Lot of packaging for a very small device.
John Sjolund
@sjolundjohn
Mar 24 2016 21:21

Question - I have a 640g insulin pump that I have been using for day to day.

I just received a 530G pump w/ Carelink.

I can't figure out if the transmitter is compatible. I could load the serial number onto the 530G pump, and start it, but then after about 10 minutes it say it lost signal. The transmitter is currently sending to 640G.

Anybody know if the transmitter for the 640g is the same as what would be used for the 530?

Jon Hughes
@JonnyRox
Mar 24 2016 21:26
@Surferin thanks for the heads up. I didn't realise it worked direct with the transmitter. Has anyone ported that to iOS? I only ask because she's got an Android phone at the moment but wants to take my iPhone when I upgrade it.
Britta
@Surferin
Mar 24 2016 21:28
No, the xDrip app doesn't work with Iphone, it only works with Android, starting with Android Version 4.3 at least and a phone with BLE
you need to built an xDrip box DIY and get the xDrip app to your android phone
Dana Lewis
@danamlewis
Mar 24 2016 21:31
@JonnyRox yes for iOS progress, check out @loudnate http://github.com/loudnate/loopkit
Jon Hughes
@JonnyRox
Mar 24 2016 21:32
Ok, so I think a new phone would be on the cards anyway. Her current one is an ancient Galaxy Ace and I don't think it's up to the job.
Britta
@Surferin
Mar 24 2016 21:32
sometimes you can get a G4 transmitter on ebay, a bit cheaper than for 400€
Dana Lewis
@danamlewis
Mar 24 2016 21:32
err, not sure if that was about xdrip or loop. I’m talking about loop ios stuff.
Jon Hughes
@JonnyRox
Mar 24 2016 21:34
for me about xdrip
Britta
@Surferin
Mar 24 2016 21:34
@JonnyRox when @AdrianLxM is back from his holidays after Easter, you can ask him exactly about the technical issues
Jon Hughes
@JonnyRox
Mar 24 2016 21:35
Also I found out for certain that her pump is a Medtronic 640G
Britta
@Surferin
Mar 24 2016 21:36
@JonnyRox have a quick look at ebay - you can buy a transmitter there for 20.50€
The transmitter is from ebay Deutschland
fallon225
@fallon225
Mar 24 2016 21:45
My son just got a "button error" on his medtronic 723. He's at a robotics event. Is there anything he can do short of calling medtronic to get it back on track? It's not under warranty anymore, by years.
Jon Hughes
@JonnyRox
Mar 24 2016 21:55
That @Surferin I think I found the same one. Just sent a message to the seller in particularly terrible German :smile:
Britta
@Surferin
Mar 24 2016 21:56
Oh I can be of help @JonnyRox I am German and I live in Gemany
Dana Lewis
@danamlewis
Mar 24 2016 21:56
@fallon225 there’s a way to pull back the peel and try to clean it off, but not necessarily something that’s going to work in an instant, and isn’t a guarantee.
mark or @amoskane have a series of pics or a video they can share on what they did to try it
but don’t send it back to medtronic, you won’t get it back with the correct version software even if they give you a discount to give you a refurbished one
John Sjolund
@sjolundjohn
Mar 24 2016 22:02

http://www.adwdiabetes.com/product/paradigm-pump-realtime-transmitter_2485_66.htm

Seems to me they must be different. Great if anybody has any experience in this area

Scott Leibrand
@scottleibrand
Mar 24 2016 22:16
@fallon225 in the mean time, you might be able to send the appropriate button press commands remotely from your openaps rig to clear the alarm
Mark Wilson
@mddub
Mar 24 2016 22:21
Jon Hughes
@JonnyRox
Mar 24 2016 22:21
Thanks @Surferin. I think there's a chance the seller doesn't want to post it outside Germany (same as I don't like posting outside UK on eBay).
Dana Lewis
@danamlewis
Mar 24 2016 22:21
(thanks @mddub )
Ben West
@bewest
Mar 24 2016 22:23
for pressing keys, you'll need mm-press-key.py --init --serial 123456 esc esc act esc act or similar to clear the alarm :-D
Britta
@Surferin
Mar 24 2016 22:27
That's a shame @JonnyRox! Try to buy a transmitter here: http://www.myglucosemonitor.nl/shop/nl/dexcom-g4-g5.html
You can get a G4 Transmitter here for 346€, if they deliver to UK
Colin Lennon
@colinlennon
Mar 24 2016 22:31
Hi @JonnyRox - I bought a G4 transmitter from www.diashop.de. They ship to the UK. I buy all my pump supplies from that site too.
Britta
@Surferin
Mar 24 2016 22:32
www.diashop.de is great, I get my pump supplies from there as well
Colin Lennon
@colinlennon
Mar 24 2016 22:33
There's two shipping options - different companies, I can't remember who. I always go for the cheaper option and delivery is usually about 4-5 working days. It's Royal Mail who deal with the UK part of the delivery, I'm never in and just collect it from the local post office. All very easy and efficient.
@Surferin agreed! :)
Just one note of caution @JonnyRox - don't be tempted to remove the transmitter from the packagin when it arrives, until you plan to start using it. It's embedded in a plastic tray, but as soon as you pop it out, the transmitter starts (and the battery starts draining)
Britta
@Surferin
Mar 24 2016 22:38
I even know the guys from diashop in Bad Mergentheim personally
Britta
@Surferin
Mar 24 2016 22:46
There's even a possibility to change the battery of the G4 Transmitter - there's a youtube video how to do it:
This message was deleted
Bill Stackpole
@billstackpole
Mar 24 2016 22:52
If anyone is going to be in Rochester, NY on 7-may, the ImagineRIT event will be on (all day and free) and I'll be in B70 with my openaps and some others - would love to meet up with others considering looping or succesfully looping. http://www.rit.edu/imagine/
Jon Hughes
@JonnyRox
Mar 24 2016 22:58
Ah, @colinlennon I think it might have been you who posted a link to diashop for me a couple of days ago. Someone posted a guide to hacking out the batteries that day too. I thought take it one step further and it's probably not that hard to make a two-piece shell for it using the 3D printer so it can have replaceable batteries.
Britta
@Surferin
Mar 24 2016 23:02
@JonnyRox here's a guide to replace the batteries of a G4 Transmitter: https://ifixit-guide-pdfs.s3.amazonaws.com/guide_55536_en.pdf
Or you can send your transmitter to a company in Czech, they do it for you for 105€ plus shipping costs:
Jon Hughes
@JonnyRox
Mar 24 2016 23:04
^ It was a different link but the same photos.
Is her 640G pump going to be ok for an Open APS? I can't remember if I asked already.
Colin Lennon
@colinlennon
Mar 24 2016 23:06
Yeah I think it was me that posted the link. There are two transmitter shapes, an old shape, and a newer, 'slim' one. I'm not sure if the process differs or not
Unfortunately you won't be able to loop with a 640g
Britta
@Surferin
Mar 24 2016 23:08
I might think the battery change of a G4 slim transmitter is easier than for the older, thicker G4 Transmitter
The link I posted is the battery change with a G4 slim transmitter
Britta
@Surferin
Mar 24 2016 23:13
but to be sure, you can send @JoernL or @ceben80 a message - they knows about the process of changing the batteries because they did do that in the past already regularly and they have tipps as well how to get a longer life from the sensors
you can message them in english
Britta
@Surferin
Mar 24 2016 23:35
@JonnyRox and for the xDrip hardware, you can buy it here: http://xdripkit.co.uk/ and only have a little bit to do on your own so it still is DIY
for the xDrip App (the software) you can talk to @AdrianLxM. He is one of the developers of xDrip. you can message him also in english. I think he will answer you then after his Easter holidays
AdrianLxM
@AdrianLxM
Mar 24 2016 23:50
@Surferin, with questions about xDrip, you can go to this channel: https://gitter.im/nightscout/dexdrip ... and don't have to wait for me.
Britta
@Surferin
Mar 24 2016 23:51
ok, thanks @AdrianLxM I wasn't aware of that!
I'm sorry I disturbed your holidays