These are chat archives for nightscout/intend-to-bolus

25th
Jul 2016
John Dodds
@johners97
Jul 25 2016 00:23
@elnjensen How's it going?
David Cintron
@loudestnoise
Jul 25 2016 00:23
@elnjensen You also might check out the dev version of the docs as it has a different flow for Phase 1. When I set up my OpenAPS rig, I skipped to Phase 2 and came back to the Nightscout and zoning stuff later
Eric Jensen
@elnjensen
Jul 25 2016 00:48
@johners97 @loudestnoise @sarahspins Sorry, stepped out to take a walk after dinner to help keep by BG from rising too much. (Nice to be able to say that to people who understand :smile: .) Coming back to this now. Looking at it with fresh eyes, I think the command I ran is under the G5 config part, which I'm not using - I thought they were to be run for all devices, but I think it's part of the G5 config and I shouldn't have run it. So I think I'm good, and have my devices configured OK, and I'll just move on to the next part of Phase and see if I can get the devices to talk to the Pi. Fingers crossed! Thanks for the help.
Julie
@julieraines
Jul 25 2016 00:51
Is “openaps do-everything” how I run my loop manually?
GabeA23
@GabeA23
Jul 25 2016 01:01
loopers... what pebble NS watchface do you use to see your loop data?
Matt Walker
@walker0
Jul 25 2016 01:02
@GabeA23 urchin displays all the data really nicely
GabeA23
@GabeA23
Jul 25 2016 01:12
@julieraines yes that's how you manually run your loop
David Cintron
@loudestnoise
Jul 25 2016 01:12
assuming your alias is called do-everything ;)
Julie
@julieraines
Jul 25 2016 01:13
awesome - i have run it a few times and it looked like it was the loop but i’m very new at this and couldn’t find the answer anywhere so thanks - have a few errors in it so now i know what to focus on
anyone seen this error in the loop:
TypeError: can't compare offset-naive and offset-aware datetimes
No JSON object could be decoded
Eric Jensen
@elnjensen
Jul 25 2016 01:26
Score! Pi is successfully talking to both pump and Dexcom! Very excited to have gotten to this point of Phase 1. Just wanted to share that - plenty more reading and learning to do before I'm looping, but I'm super excited to have gotten to the point of having the hardware communicating.
Julie
@julieraines
Jul 25 2016 01:28
It is the coolest part, I think - congrats! 🤓
Jason Calabrese
@jasoncalabrese
Jul 25 2016 01:30
:smile:
Ben West
@bewest
Jul 25 2016 01:44
@julieraines that error usually happens when a report is doing something with different files where one has timezones and the other does not
Julie
@julieraines
Jul 25 2016 01:48
ahhhh groovy thanks
John Dodds
@johners97
Jul 25 2016 01:54
I am going over openaps and how to use it to truly get my head around it. Report add and Invoke. Put a sticky note in my notepad to say always invoke... So determined to develop my own customized system so I guess I should stay in the deep end and find the solutions for myself.
Even though i'm what could be defined as a "noob"
or newbie :D
rafaelmatuk
@rafaelmatuk
Jul 25 2016 01:56
@bewest Hi -I have been trying to set up openxshareBLE on a new rig based on an edison, After a few tries the library is properly installed, but I cannot communicate with the Dexcomm using bluetooth from openaps. Do I need to specify the device name somewhere?

these are the instructions I followed: sudo pip install git+git://github.com/bewest/Adafruit_Python_BluefruitLE.git'#wip/bewest/custom-gatt-profile'
sudo pip install git+git://github.com/bewest/openxshareble.git

adds openxshareble as vendor

openaps vendor add openxshareble
Then set up cgm device this way:

openaps device add cgm openxshareble

Ben West
@bewest
Jul 25 2016 02:01
that should create the cgm device
try openaps use cgm list_dexcom
Jason Calabrese
@jasoncalabrese
Jul 25 2016 02:08
@rafaelmatuk also some more notes on using openxshareble here https://github.com/openaps/docs/wiki/CGM-Loop-with-openxshareble-scratchpad
rafaelmatuk
@rafaelmatuk
Jul 25 2016 02:09
I get a number of errors every time I try to use the cgm
the device was created
openaps device show cgm
openxshareble://cgm/None
going through the notes -
rafaelmatuk
@rafaelmatuk
Jul 25 2016 02:21
ok @bewest , I will need to spend time on the notes, and I think I will get it working. One question: pairing the dexcomm with the edison will remove the pairing with the phone and with the phone app?
Ben West
@bewest
Jul 25 2016 02:56
what happens if you do openaps use cgm list_dexcom?
rafaelmatuk
@rafaelmatuk
Jul 25 2016 02:58
openaps use cgm list_dexcom
Traceback (most recent call last):
File "/usr/local/bin/openaps-use", line 4, in <module>
import('pkg_resources').run_script('openaps==0.1.5', 'openaps-use')
File "build/bdist.linux-i686/egg/pkgresources/_init.py", line 719, in run_script
File "build/bdist.linux-i686/egg/pkgresources/_init.py", line 1504, in run_script
File "/usr/local/lib/python2.7/dist-packages/openaps-0.1.5-py2.7.egg/EGG-INFO/scripts/openaps-use", line 63, in <module>
app( )
File "/usr/local/lib/python2.7/dist-packages/openaps-0.1.5-py2.7.egg/openaps/cli/init.py", line 51, in call
self.run(self.args)
File "/usr/local/lib/python2.7/dist-packages/openaps-0.1.5-py2.7.egg/EGG-INFO/scripts/openaps-use", line 57, in run
output = app(args, self)
File "/usr/local/lib/python2.7/dist-packages/openaps-0.1.5-py2.7.egg/openaps/uses/init.py", line 92, in call
return self.method.selected(args)(args, app)
File "/usr/local/lib/python2.7/dist-packages/openaps-0.1.5-py2.7.egg/openaps/uses/init.py", line 31, in call
return self.method(args, app)
File "/usr/local/lib/python2.7/dist-packages/openxshareble/init.py", line 97, in call
res = self.ble.run_mainloop_with(run, quit_with_loop=False)
TypeError: run_mainloop_with() got an unexpected keyword argument 'quit_with_loop'
more errors
the permissions were not properly set up (it was only set up for root). fixed that, configured MAC and serial on the INI file,
Jim is CrushingT1D
@CrushingT1D
Jul 25 2016 03:06
@loudestnoise some photos of my first Edison setup: https://github.com/jmatheson/murselessaps/blob/master/v1.md
Ben West
@bewest
Jul 25 2016 03:18
that particular error I think indicates some kind of mismatch between Adafruit_Python_BLE and openxshareble
Ditman Johnson
@ditmanj
Jul 25 2016 03:22
Have just purchased the various items req. to give this a go (Rasberry, etc). Realize that the only usb keyboard I still have is one for a very old iMac. Is this an issue of any kind?
rafaelmatuk
@rafaelmatuk
Jul 25 2016 03:26
@bewest could be. I am going to start from scratch again...
John Dodds
@johners97
Jul 25 2016 04:46
Been reporting and invoking for hours so everything links up...
in openaps.ini
someone has put things with _ instead of - so im constantly having to invoke
Jason Calabrese
@jasoncalabrese
Jul 25 2016 05:12
@ditmanj, thats fine, you won't need the keyboard for long
you don't really need one at all
savelik
@savelik
Jul 25 2016 05:16

What did I do wrong here? (Dexcom G5 receiver connected through USB)
[device "cgm"]
vendor = openaps.vendors.dexcom
extra = cgm.ini

[report "raw-cgm/glucose-raw.json"]
device = cgm
threshold = 100
use = oref0_glucose
hours = 2.0
reporter = JSON
no_raw = True

[report "monitor/glucose.json"]
use = rezone
reporter = JSON
astimezone = False
date = dateString display_time
adjust = missing
input = raw-cgm/glucose-raw.json
device = tz
timezone =

Getting this error
monitor/glucose.json raised can't open 'raw-cgm/glucose-raw.json': [Errno 2] No such file or directory: 'raw-cgm/glucose-raw.json'

It's getting late here, trying to finish the openaps setup :)))
Jason Calabrese
@jasoncalabrese
Jul 25 2016 05:19
does openaps report invoke raw-cgm/glucose-raw.json work?
savelik
@savelik
Jul 25 2016 05:22
yes
pi@raspberrypi:~/sofaps $ openaps report invoke raw-cgm/glucose-raw.json
cgm://JSON/oref0_glucose/raw-cgm/glucose-raw.json
reporting raw-cgm/glucose-raw.json
[fixed]
I think that I have to walk this road alone tomorrow in the AM :)))) when my head will be working again haha
savelik
@savelik
Jul 25 2016 05:30
fixed that. Thanks a lot! I missed 2 commands, makes sense now. Have a great night ;)
Jason Calabrese
@jasoncalabrese
Jul 25 2016 06:33
@logichammer, @Spazholio, anyone else working on getting openxshareble tuned I updated the wiki page with a couple optimizations to pull less data and upload the first point faster https://github.com/openaps/docs/wiki/CGM-Loop-with-openxshareble-scratchpad
Paul Martin
@Spazholio
Jul 25 2016 11:46
:thumbsup:
Eric Jensen
@elnjensen
Jul 25 2016 12:24
Does openxshareble work only with G4+Share, or also with G5? The docs suggest only the former - if so, is there a BLE option for G5?
Jason Calabrese
@jasoncalabrese
Jul 25 2016 12:49
Only with g4+ share, currently no way to use ble for g5 via ble with the pi or Edison
We'd need to port the iOS and Android code to python
Annie Hemmesch
@Telefingers
Jul 25 2016 12:58
Trying to find the guy who posted about copy'ing the data for his 5th pump successfully in 30 minutes....ARE YOU OUT THERE GOD? It's me Annie : )
Eric Jensen
@elnjensen
Jul 25 2016 13:07
Thanks @jasoncalabrese. Still working on my initial setup but can't resist looking ahead a bit.
Can anyone recommend a USB battery (model or brand) in which the case can be opened to replace the LiPo battery packs inside? Some (most?) are sealed pretty tight and I hate to recycle the whole thing when it just needs the battery.
David Cintron
@loudestnoise
Jul 25 2016 13:44
OneDrop dropped today ;)
well their Indiegogo campaign at least
Paul Martin
@Spazholio
Jul 25 2016 13:44
Whuzzat?
psssh Nov 2016 estimated
Paul Martin
@Spazholio
Jul 25 2016 13:45
...supple vegan leather?
David Cintron
@loudestnoise
Jul 25 2016 13:45
yeah, regular vegan leather just won’t do
Paul Martin
@Spazholio
Jul 25 2016 13:45
That's weird, right? Like, that's not just me? =)
David Cintron
@loudestnoise
Jul 25 2016 13:45
it’s also gluten free
Paul Martin
@Spazholio
Jul 25 2016 13:45
I'm out.
Gluten or bust!
David Cintron
@loudestnoise
Jul 25 2016 13:46
Ha, they’re trying I believe a premium experience to the world of meters
I like the idea of subscription based though
That’s what myDario does too
Paul Martin
@Spazholio
Jul 25 2016 13:46
Ooooh, that disclaimer is worrying though.
David Cintron
@loudestnoise
Jul 25 2016 13:47
$40/mo is pricey though for strips
Paul Martin
@Spazholio
Jul 25 2016 13:47
"The One Drop blood glucose meter has not been cleared or approved by the FDA..."
David Cintron
@loudestnoise
Jul 25 2016 13:47
yeah, minor detail
2016-07-25_08-47-33.png
Designed to meet or exceed FDA requirements
so there’s that
we can take their word for it
Paul Martin
@Spazholio
Jul 25 2016 13:50
I'm not sure I see the draw of this, other than the integration with your mobile device. And for pumpers, it's a non-starter, as we REALLY like our meters to talk to our pumps. I'll be interested to see where this goes.
David Cintron
@loudestnoise
Jul 25 2016 13:52
Yeah, they have had the app for a while now promising the meter would come eventually
I do need to get a new meter soon as I’m still finishing all my freestyle strips that I had with my PDM, but my insurance doesn’t give me Tier 1 pricing on freestyle so I’m prime to swap
and I would love one that publishes to HealthKit on my iPhone
the asthetic does appeal to me
ooooh shiny
"Join us as we navigate diabetes, one drop at a time"
Pete Schwamb
@ps2
Jul 25 2016 14:24
This message was deleted
Paul Martin
@Spazholio
Jul 25 2016 14:24
HAH!
Pete Schwamb
@ps2
Jul 25 2016 14:27
Not sure what their designer was thinking.
Gina
@gclyon
Jul 25 2016 14:29
is there a way to search this chat to dig for answers to questions i'm sure have been covered already? i'm stuck in phase 2 - calculate-iob process
Dana Lewis
@danamlewis
Jul 25 2016 14:34
@Telefingers the 30min was from someone who's set up multiple rigs before. Won't apply to a first time setup. But let us know where you're stuck and we can try to help
@gclyon yep. Try the website version and or search the web archives via Google
Eric Jensen
@elnjensen
Jul 25 2016 15:03
@gclyon I had the same question. I'm on the web version and the search function seems focused on names of rooms/chats, tricky to find individual posts.
Sort of works for individual messages but not very flexible/specific search syntax unless I'm missing something.
David Cintron
@loudestnoise
Jul 25 2016 15:07
Dana Lewis
@danamlewis
Jul 25 2016 15:19
nice work @loudestnoise! thanks for sharing
David Cintron
@loudestnoise
Jul 25 2016 15:20
:smile:
Kelly S. Watson
@KellyIsWorking_twitter
Jul 25 2016 15:40
great post @loudestnoise
David Cintron
@loudestnoise
Jul 25 2016 15:43
Thanks!
William Fallon
@inform880
Jul 25 2016 15:55
Hi, its been a while since I was active here, and its nice to see so much conversation. Anyway, I have the opportunity to have a table at my local maker faire, at the Henry Ford Museum in Dearborn, Michigan. Would I be able to present my implementation of OpenAPS?
Dana Lewis
@danamlewis
Jul 25 2016 15:58
@inform880 absolutely, if you want to! :)
sarahspins @sarahspins is wearing her Maker Faire Austin shirt today :+1:
Dana Lewis
@danamlewis
Jul 25 2016 16:01
@inform880 let us know if you need any support
William Fallon
@inform880
Jul 25 2016 16:04
@danamlewis Alright, thanks! I was thinking a trifold poster with everything explained, plus my current implementation. I've actually never been to a Maker faire before, anything I should expect?
Dana Lewis
@danamlewis
Jul 25 2016 16:06
sounds like @sarahspins can provide some tips :) plus the SF crew who did their MakerFaire recently: @channemann, @bewest, @skrugman, @loudnate, @amoskane, @mddub et al!
Ditman Johnson
@ditmanj
Jul 25 2016 16:12
@jasoncalabrese Thanks...though a bit confused by your response. Won't all of the various coding I need to do be by me entering it on a keyboard attached to the Raspberry?
Dana Lewis
@danamlewis
Jul 25 2016 16:13
@ditmanj after you do the initial setup, you’ll be able to ssh into your Pi and can use your normal computer from then on out
Ditman Johnson
@ditmanj
Jul 25 2016 16:15
@danamlewis Thanks - ssh?
Dana Lewis
@danamlewis
Jul 25 2016 16:18
it allows you to log into other machines/computers. i.e. from your laptop, log into the Pi once you’ve configured it to be logged in to from elsewhere
toward the beginning of the OpenAPS setup process, there are some Linux related steps that are universal (not specific to OpenAPS), so if you see a term you don’t understand, try Google too for some tutorials or definitions.
there’s also some links here that may be worth checking out as you get started: https://github.com/openaps/docs/blob/master/docs/docs/Resources/technical-resources.md
Ditman Johnson
@ditmanj
Jul 25 2016 16:20
@danamlewis Thanks.
Dragan Maksimovic
@dm61
Jul 25 2016 16:41
very nice post @loudestnoise - thanks!
David Cintron
@loudestnoise
Jul 25 2016 16:42
:shipit:
type1diabetesproject
@type1project_twitter
Jul 25 2016 16:43
Hi Everyone, I'm new to this and thinking about building my own artificial pancreas. I have a lot to learn but before I even get started I have a quick question about my pumps compatibility. My insulin pump is a Medtronic minimed Paradigm 554 (2008). However, I recently received a new pump from Medtronic due to a malfunction so the version of software is 3.1E. Is this compatible? Thanks in advance, Liam
David Cintron
@loudestnoise
Jul 25 2016 16:45
@type1project_twitter Unfortunately, that firmware probably won’t work. Did you check to see if it has PC Connect under Utilities?
type1diabetesproject
@type1project_twitter
Jul 25 2016 16:48
Hi @danamlewis @loudestnoise , thanks for this. I wasn't sure if 2.6A (which I assume to be America) was the same as 2.6E (which I assume to be Europe) but I just found PC Connect under "Utilities - connect devices - PC connect" that's disappointing! Time to start shopping for a new(old) pump. Just out of interest, do the reservoirs for the old pump fit the new ones?
David Cintron
@loudestnoise
Jul 25 2016 16:49
Bummer, yep the reservoirs will work. Just make sure if you are using a 554 that you find a 5XX pump if you want to use your supplies
7XX has the bigger size 3mL reservoirs
type1diabetesproject
@type1project_twitter
Jul 25 2016 16:50
Perfect. Thanks for your help. I'll come back and update you once I get going :)
David Cintron
@loudestnoise
Jul 25 2016 16:51
:+1:
Dragan Maksimovic
@dm61
Jul 25 2016 16:54
I believe 7XX pumps can use smaller 1.8mL reservoirs, so @type1project_twitter you could actually use a compatible 7XX pump with your supplies. 7XX pumps are slightly larger than 5XX pumps, however.
David Cintron
@loudestnoise
Jul 25 2016 16:55
Yeah, I think you’re right @dm61. The plunger thing will just keep moving until it hits
Dragan Maksimovic
@dm61
Jul 25 2016 16:56
Yes
Jeremy M Lucas (GetRileyLink.org)
@jlucasvt
Jul 25 2016 18:01
@dm61 Register with medwow. Create a list of the x22’s available on the site, and the people selling them. Then send direct emails to each one. I got replys in very short order. MM723’s however are more like unicorns. (@loudestnoise seems to be a magical creature as well with regards to 723’s or just lucky :smile: )
KJSATSTORR
@KJSATSTORR
Jul 25 2016 18:02
@jasoncalabrese @jasoncalabrese
David Cintron
@loudestnoise
Jul 25 2016 18:06
@jlucasvt I definitely got lucky
Jeremy M Lucas (GetRileyLink.org)
@jlucasvt
Jul 25 2016 18:06
:+1:
@loudestnoise How long does your battery last? (assuming you are using Energizer Ultimate Lith)
Ben West
@bewest
Jul 25 2016 18:08
:+1: on contacting the sellers
I find that they are people just like everyone else, and sometimes are at least as nervous as you about selling this thing on some weird website
Jeremy M Lucas (GetRileyLink.org)
@jlucasvt
Jul 25 2016 18:09
Very true Ben. Most just want them to go to a good home.
Ben West
@bewest
Jul 25 2016 18:09
contacting them in person with a nice little note goes a long way
Jeremy M Lucas (GetRileyLink.org)
@jlucasvt
Jul 25 2016 18:11
I had a line on (the same 723 that most of us here had) and spoke with the person selling it. He asked why everyone wanted a certain firmware. We talked for a bit and he said he had a 722 as well. He sent me the 722 for a great deal and we chat on email about how things are going with Aps and Loop. Great ppl this T1D community.
David Cintron
@loudestnoise
Jul 25 2016 18:17
@jlucasvt I’m actually still using Alkaline. When I run out of what I’ve got, I’m gonna try those Energizer Lithium ones though
Kevin Marshall
@ruess
Jul 25 2016 19:09
it's disappointing that our only option currently is using old pumps which will soon become more and more outdated and face more maintenance issues as time goes on
does anyone know of anyone trying to 'make contact' with a modern pump of some sort?
Dana Lewis
@danamlewis
Jul 25 2016 19:10
@ruess we have contact with all the manufacturers, you’re welcome to join us in reaching out to them and asking for documented comms protocols and the ability to send temp basal commands remotely
Kevin Marshall
@ruess
Jul 25 2016 19:12
ahh so that's what we need -the documentation. Was that available for the old medronic pumps and is that why there was the ability to communicate with those in the first place?
Dana Lewis
@danamlewis
Jul 25 2016 19:13
no, it’s never been available to us: @bewest spent years figuring that out, which is why we’re able to do so today. but the ability to send commands to the pump was there before, which is what we use today for OpenAPS.
Kevin Marshall
@ruess
Jul 25 2016 19:14
I see @danamlewis - so with the new pumps, are we even sure there's an ability for the pumps to receive commands via wireless? Or is this an unknown at this point?
Ben West
@bewest
Jul 25 2016 19:14
I've "made contact" with many of the vendors, I often recommend calling up support to ask about buying a compatible pump or the access to the documentation
Dana Lewis
@danamlewis
Jul 25 2016 19:14
but no modern pumps have the ability for us to remote commands with temp basals, which is what pump manufacturers need to hear as a need from the community for future gen products. and for us to have the comms protocols documented so we can utilize our products as needed.
Kevin Marshall
@ruess
Jul 25 2016 19:15
gotcha @danamlewis - makes sense
Ben West
@bewest
Jul 25 2016 19:15
the evidence I've gathered suggests there is a way to remote temp basal on most pumps, we simply don't know the mechanism
Dana Lewis
@danamlewis
Jul 25 2016 19:15
@ruess it’s technologically possible for sure.
Kevin Marshall
@ruess
Jul 25 2016 19:15
interesting @bewest -mind if i ask where have you found evidence of this overall?
Ben West
@bewest
Jul 25 2016 19:15
besides remote temp basal (this is called command and control in the business) it's also necessary to read the history in order to determine what's happened
one is the design inherent in the products themselves, and the legacy of design constraints that goes into them
Kevin Marshall
@ruess
Jul 25 2016 19:17
Gotcha . . ok . . good to know. thanks guys!
Ben West
@bewest
Jul 25 2016 19:17
during the process of manufacturing these devices, it's really important to be able to test and verify each component, hardware and software
Kelly S. Watson
@KellyIsWorking_twitter
Jul 25 2016 19:18
Has anyone been in touch with NXP (freescale) re: omnipod?
Ben West
@bewest
Jul 25 2016 19:19
so the ideal in that scenario is that near the "end" of the production line, right before it gets put in a box, you would run a test on all the possible functions... suspending, resuming, setting all the basal, bolusing, everything, without changing the device at all
then you can test it, wipe it's memory, and put it in the box
Kevin Marshall
@ruess
Jul 25 2016 19:20
ahhaa . . @bewest - that makes sense for sure
mariano42
@mariano42
Jul 25 2016 19:22
hey all.. I have been trying to update my loop alias so that it automatically calls oref0-reset-usb and clockset.sh on failure. I was hoping to just append after the 'echo LOOP failed', but it always runs the two commands even if it doesnt fail. right now i have loop = ! bash -c "( openaps preflight && openaps gather && openaps enact) || echo LOOP FAILED. && ( oref0-reset-usb && openaps clockset)" .. any suggestions on how to only make those last 2 calls on failure?
Kevin Marshall
@ruess
Jul 25 2016 19:25
A rather newbie question as I've just gotten back to the states where I can start working on this . . .
since the rasberry pi has bluetooth, is there a way to bypass using a dexcom receiver and just let the dexcom transmitter talk directly to the pi?
Dragan Maksimovic
@dm61
Jul 25 2016 19:36
@mariano42 I guess you could just move the second ( in front of the echo, so: "( openaps preflight && openaps gather && openaps enact) || (echo LOOP FAILED. && oref0-reset-usb && openaps clockset)" Then, the echo and the two commands, all 3 now grouped within ( ) will run only if any of the loop commands failed.
Kelly S. Watson
@KellyIsWorking_twitter
Jul 25 2016 19:40
Hi @ruess - right there with you! Not sure where you are in the process but if you haven't yet - it might be work looking at the different setups - some use the receiver, others don't – for example Rileylink + Loopkit.
David Cintron
@loudestnoise
Jul 25 2016 19:46
@ruess People do use something called openxshareble that lets you get Dexcom values off G4 with Share receiver. I’m not sure if anyone does it with an RPi3 with the built in BT though. I think @Spazholio tried it once and had mixed results
mariano42
@mariano42
Jul 25 2016 19:49
@dm61 thanks! i will give it a try
Kevin Marshall
@ruess
Jul 25 2016 19:50
so basically the only difference between openxshareable and normal are that you can use bluetooth to talk between the Dexcom Receiver and the RPi3, correct @loudestnoise ?
Jarred Yaw
@jyaw
Jul 25 2016 19:50

@jasoncalabrese I was going through your openxshareble scratchpad and encountered issues with this line...

openaps report add monitor/cal.json JSON cgm nightscout_calibrations 1

I don't think there's a nightscout_calibrations option available... do I need a particular branch of openxshareble to do this use option?

Kevin Marshall
@ruess
Jul 25 2016 19:50
yet you still need the hardware
Cool will checkout rileylink + loopkit @KellyIsWorking_twitter
thank!
David Cintron
@loudestnoise
Jul 25 2016 19:58
@ruess I don’t know a whole lot about as I have a G5 so never got to try it out, but I know that it’s popular with those wanting to do an Intel Edison rig and have G4. I might recommend though if you’re starting out to go simple and do the USB connected receiver
Kevin Marshall
@ruess
Jul 25 2016 19:58
that sounds good @loudestnoise - could I just use a regular G4 for that or do I need a G4 with share?
David Cintron
@loudestnoise
Jul 25 2016 19:59
for openxshareble you do need with share
for USB connected the non share works
Kevin Marshall
@ruess
Jul 25 2016 19:59
gotcha - that sounds like the way to go for now - simpler is better for now :)
David Cintron
@loudestnoise
Jul 25 2016 20:00
:+1:
Kevin Marshall
@ruess
Jul 25 2016 20:02
one more thing @loudestnoise - you're basically using a G5 with a G5 receiver hooked into the RPi3?
via usb
David Cintron
@loudestnoise
Jul 25 2016 20:03
So I have a G4 with Share receiver. Dexcom offered a software upgrade that made it compatible with the G5 transmitter. Then I was able to use it with my RPi3 for OpenAPS just by connecting USB
John Sjolund
@sjolundjohn
Jul 25 2016 20:04
I just uploaded to the latest Dev branch and note that the OpenAP pillbox is now mixing mmol and mg values. By design?
Kevin Marshall
@ruess
Jul 25 2016 20:04
oh nice! I'll look into it - never used dexcom stuff before so I didn't realize there was some compatibility between G4 and G5 tech
David Cintron
@loudestnoise
Jul 25 2016 20:04
@ruess Now I use the RileyLink & Loop and Loop pulls my G5 readings
Kelly S. Watson
@KellyIsWorking_twitter
Jul 25 2016 20:07
@loudestnoise do you alternate between your rigs?
David Cintron
@loudestnoise
Jul 25 2016 20:07
At first I did, but now I’m RileyLink + Loop all the time
Kelly S. Watson
@KellyIsWorking_twitter
Jul 25 2016 20:14
@loudestnoise thanks
Kevin Marshall
@ruess
Jul 25 2016 20:27
@loudestnoise good stuff!
Paul Martin
@Spazholio
Jul 25 2016 20:36
@ruess I could never get openxshareble working with the Pi3 built-in BT. Had to use an external fob.
Lori
@LoriLori
Jul 25 2016 20:41
any update on FW dump of 723 or later? Like Ben said, test commands are there just protected by some magic packet
Jason Calabrese
@jasoncalabrese
Jul 25 2016 20:43
@jyaw I think you need a current dev version of openaps to get the nightscout_calibrations use
adding the oref0_glucose glucose report also fails without the most current version of openaps#dev
Lynne Butts
@flutelynne_twitter
Jul 25 2016 20:49
@jlucasvt With alkaline, I only got about 3 days of battery life, and with Lithium, I get close to six days.
rafaelmatuk
@rafaelmatuk
Jul 25 2016 20:56
@logichammer, @Spazholio, @jasoncalabrese , @bewest , seems like i am really stuck trying to get the G4 Platinum wit Share working on an Edison via bluetooth:
Traceback (most recent call last):
File "/usr/local/bin/openaps-use", line 4, in <module>
import('pkg_resources').run_script('openaps==0.1.5', 'openaps-use')
File "build/bdist.linux-i686/egg/pkg_resources/init.py", line 719, in run_script
File "build/bdist.linux-i686/egg/pkg_resources/init.py", line 1504, in run_script
File "/usr/local/lib/python2.7/dist-packages/openaps-0.1.5-py2.7.egg/EGG-INFO/scripts/openaps-use", line 63, in <module>
app( )
File "/usr/local/lib/python2.7/dist-packages/openaps-0.1.5-py2.7.egg/openaps/cli/init.py", line 51, in call
self.run(self.args)
File "/usr/local/lib/python2.7/dist-packages/openaps-0.1.5-py2.7.egg/EGG-INFO/scripts/openaps-use", line 57, in run
output = app(args, self)
File "/usr/local/lib/python2.7/dist-packages/openaps-0.1.5-py2.7.egg/openaps/uses/init.py", line 92, in call
return self.method.selected(args)(args, app)
File "/usr/local/lib/python2.7/dist-packages/openaps-0.1.5-py2.7.egg/openaps/uses/init.py", line 31, in call
return self.method(args, app)
File "/usr/local/lib/python2.7/dist-packages/openxshareble/init.py", line 97, in call
res = self.ble.run_mainloop_with(run, quit_with_loop=False)
TypeError: run_mainloop_with() got an unexpected keyword argument 'quit_with_loop'
any ideas? I am running out of already- installed it twice
Paul Martin
@Spazholio
Jul 25 2016 21:02
What directions did you follow?
Jason Calabrese
@jasoncalabrese
Jul 25 2016 21:16
and then after that the wiki page should help get a cgm loop running
I still get some errors, but with the retries it recovers and data stays pretty current
Ditman Johnson
@ditmanj
Jul 25 2016 21:28
Struggling with attempt to connect Raspberry to PC with an ethernet cord /SSH. It seems that the link in the "Setting up Raspberry" info is for connecting a Mac to Pi. Where can I find directions for doing this with PC? Thanks.
David Cintron
@loudestnoise
Jul 25 2016 21:30
@ditmanj What have you done so far? Do you have Raspbian on your Pi?
Ditman Johnson
@ditmanj
Jul 25 2016 21:34
I installed Raspbian (which I thought was fairly miraculous) and connected through wifi to my local network. Have plugged ethernet cord from PC to Pi, but I don't see the instructions on how to make the PC talk to/see the Pi.
At present, have monitor, keyboard and mouse connected to Pi
David Cintron
@loudestnoise
Jul 25 2016 21:47
Ah ok, so what you need is an app to SSH into your Pi
for Windows, you’d probably want to use Putty
putty.jpg
I’d grab this one for Windows, not sure what all that other business is
mariano42
@mariano42
Jul 25 2016 21:49
@loudestnoise i use putty, but i am screwed at work because I can't connect the Pi to our wifi. Trying to setup the Pi so that I can access it even when its not connected to wifi... i have a pi3 so i was thinking bluetooth pan, but I am not sure if its even possible
Jarred Yaw
@jyaw
Jul 25 2016 21:49
@jasoncalabrese thanks for confirming!... will upgrade then.
David Cintron
@loudestnoise
Jul 25 2016 21:50
@mariano42 same situation for me, I started using reverse SSH to another computer, but you’d need a different linux computer for that to work
and then someone could uh possibly SSH into your OpenAPS rig if you’re not careful and don’t have it secured correctly
mariano42
@mariano42
Jul 25 2016 21:51
@loudestnoise verizon makes it a pain to get an iphone setup as a hotspot too.. been a huge pain!
David Cintron
@loudestnoise
Jul 25 2016 21:52
Really? I have Verizon and it just works on my plan
I have this plan apparently MORE EVERY UNL TLK TXT 10GB
which I believe translates into More Everything Unlimited Talk & Text with 10GB of Data
mariano42
@mariano42
Jul 25 2016 21:54
yea, not on my plan... i decided to use my company phone for everything (carrying two phones around seemed silly) and my company has it turned off. Trying to sweet talk my way into getting them to turn it on, but they would rather just give me an aircard!
David Cintron
@loudestnoise
Jul 25 2016 21:55
Ah yeah, that’s common for employers to not enable it. Doesn’t make much sense these days. Data is data
mariano42
@mariano42
Jul 25 2016 21:56
yea everytime something happens with my loop or if i need to get into it i need to go find a conference room with an hdmi hookup lol
Ditman Johnson
@ditmanj
Jul 25 2016 22:03
blob
@loudestnoise Thanks - so this is wha t I see when I open PuTTy. What next?
mariano42
@mariano42
Jul 25 2016 22:07
@loudestnoise thinking about getting one of these for my desk.... https://www.amazon.com/Kuman-Capacitive-800x480-Raspberry-Various/dp/B01F3801A2/ref=sr_1_6?ie=UTF8&qid=1469484166&sr=8-6&keywords=raspberry+pi+3+touchscreen .I can get on to the guest network, but it requires you to log in and enter your email before it will connect and times out after 8 hours. This would at least get me setup.
Ditman Johnson
@ditmanj
Jul 25 2016 22:15
@loudestnoise - dumb question - does PuTTy need to be on the Pi, or the PC, or both?
Ben West
@bewest
Jul 25 2016 22:15
putty is for windows
Ditman Johnson
@ditmanj
Jul 25 2016 22:16
Thanks. For some reason I'm unable to connect to Pi. I'll keep messing with it.
Ben West
@bewest
Jul 25 2016 22:23
where it says "Host Name (or IP Address)", you can try raspberrypi.local
hopefully it asks for user/password
rafaelmatuk
@rafaelmatuk
Jul 25 2016 22:40
@Spazholio I followed the same directions as @jasoncalabrese. I am thinking on retrying it one more time.
Paul Martin
@Spazholio
Jul 25 2016 22:48
You’re certain you’re using the right bluetoothd and that it’s running with the —experimental flag? All that good stuff?
Ditman Johnson
@ditmanj
Jul 25 2016 22:54
@bewest @loudestnoise Thanks - got it to work. My work PC had security settings that wasn't allowing the connection. Up and running on an old home PC.
Jeremy M Lucas (GetRileyLink.org)
@jlucasvt
Jul 25 2016 22:57
@flutelynne_twitter thanks. that’s my experience. just doing some testing with time decay for Loop visualization.
Aaron Michelson
@Aaybob
Jul 25 2016 22:58
@mariano42 the parenthesis and operator order is wrong for what you want you do || xyz && (abc &&efg) but you should do || (xyz && abc && efg)
KJSATSTORR
@KJSATSTORR
Jul 25 2016 23:01
curl -s https://raw.githubusercontent.com/openaps/docs/master/scripts/quick-packages.sh bash - I have made several attempts too run the command, but get syntax error . What am I missing?
Aaron Michelson
@Aaybob
Jul 25 2016 23:02
in other words "or" applies to one operand (a || b) && xyz but you want (a || b&&xyz)
oh I see @dm61 answered that
rafaelmatuk
@rafaelmatuk
Jul 25 2016 23:22
@Spazholio Yeap, all seems ok: root 1968 0.0 0.2 5236 2072 ? S 15:30 0:00 /usr/local/bin/bluetoothd --experimental
edison 2208 0.0 0.0 4320 892 pts/0 S+ 18:22 0:00 grep bluetoothd
Dragan Maksimovic
@dm61
Jul 25 2016 23:23
@mariano42 at work, to avoid having to use my iphone's hotspot, I connect my RPI via ethernet cable to my Mac laptop (which is on work's Wi-Fi), and turn on "Internet Sharing" using "USB Ethernet" on the Mac. I can then ssh to RPI from my Mac as on a local network. This may or may not work depending on the wi-fi network settings at your work. I do not know if the same could be done from a PC.
rafaelmatuk
@rafaelmatuk
Jul 25 2016 23:24
[bluetooth]# version
Version 5.37
mariano42
@mariano42
Jul 25 2016 23:30
@dm61 it does work for pc, but unfortunately I don't have local admin rights on my machine so I can't turn on network sharing.
Dragan Maksimovic
@dm61
Jul 25 2016 23:31
oh, I see.
GabeA23
@GabeA23
Jul 25 2016 23:34

Are most of you selling your insurance-provided pump (with firmware that is too new)?

I know I'm never going back to not looping so my insurance-provided pump (with brand new firmware) is pretty much useless to me. But it's a basically brand new 723. I'd like to sell it and buy a backup 722 (ver 2.4A).

The insurance company can't ask for it back can they? I know that after two years (once it's off warranty) I own it, but now it technically belongs to them, right?

I guess if both of my craiglist-purchased 722's fail I'm SOL
jaylagorio
@jaylagorio
Jul 25 2016 23:35
@GabeA23 You're not leasing it - it's your device. You can sell it now if you want.
My warranty lasts four years and as far as I know the only benefit it gives me is they replace it without charging the copay if it breaks during that time.
GabeA23
@GabeA23
Jul 25 2016 23:36
@jaylagorio Okay sweet. With the proceeds from selling it I could buy two backup 722's
jaylagorio
@jaylagorio
Jul 25 2016 23:36
You could definitely do that.
Eric Jensen
@elnjensen
Jul 25 2016 23:36
I'm keeping mine for now - actually a Tandem t-slim. For the moment I'm not sure whether I'll be looping all the time, maybe will use Tandem during the day to start. Not sure about the bulk of the rig for daytime use.
Jeremy M Lucas (GetRileyLink.org)
@jlucasvt
Jul 25 2016 23:37
@GabeA23 I did just what you are saying with my Tandem.
GabeA23
@GabeA23
Jul 25 2016 23:37
So far my insurance company is nearly useless. I buy my strips off amazon too because it was cheaper than going through my insurance
Jeremy M Lucas (GetRileyLink.org)
@jlucasvt
Jul 25 2016 23:39
RILEYLINKS IN STOCK AND READY TO SHIP
https://getrileylink.azurewebsites.net
(popcorn, peanuts, candy, get your red hots RileyLinks)
Dana Lewis
@danamlewis
Jul 25 2016 23:41
lol
get the rileylink before you get the candy, perhaps ;)
Jeremy M Lucas (GetRileyLink.org)
@jlucasvt
Jul 25 2016 23:43
Oh I remember the days when candy was a treat and not a treatment…
Eric Jensen
@elnjensen
Jul 25 2016 23:44
@jlucasvt LOL. If I never eat any Smarties again, that would be fine with me.
Jeremy M Lucas (GetRileyLink.org)
@jlucasvt
Jul 25 2016 23:45
oh so true. I have those giant ones they taste better than Glucose tabs (and are the same thing)
That’s a fun diversion for the crowd. Who’s upset that they got rid of LIME skittles. Green apple is gross it does not help me “taste the rainbow”
Dana Lewis
@danamlewis
Jul 25 2016 23:46
^^^ yes
Jeremy M Lucas (GetRileyLink.org)
@jlucasvt
Jul 25 2016 23:47
Green Apple does not taste “good” with any of the other fruit flavors cause it’s too fake. Lime on the otherhand was so perfect.
jaylagorio
@jaylagorio
Jul 25 2016 23:49
@GabeA23 Your strips are cheaper via Amazon? What strips are you using?
val-albany
@val-albany
Jul 25 2016 23:50
@rafaelmatuk I am seeing the exact same error as you, stuck in the same leg of setup, apparently. Edison with Raspbian and TI stick; dexcom G4 with share. I can talk to the pump, but not the dexcom. Reloaded everything, still stuck and very frustrated. I admit I'm hoping you'll figure it out as I am ready to throw the darn thing at the wall...
GabeA23
@GabeA23
Jul 25 2016 23:56
@jlucasvt just a suggestion... Maybe you could write on the Azure getrileylink page that they will likely have to pay $99 for a developer account? Just so people can budget on top of the Riley link cost