These are chat archives for nightscout/intend-to-bolus

27th
Oct 2016
cassknox
@cassknox
Oct 27 2016 00:00
thank you SO MUCH for your help :)
Yes, I have a 6 foot USB extender on it to help
It's usually okay at work when I'm just at my desk, but at home gets tricky
Paul Martin
@Spazholio
Oct 27 2016 00:09
I get that. I would HIGHLY recommend getting a TI stick (or an Explorer board, really!) at some point. The range is SO MUCH BETTER.
Dana Lewis
@danamlewis
Oct 27 2016 00:40
@cassknox also the setup scripts will make your next rig a lot easier too :)
Paul Martin
@Spazholio
Oct 27 2016 00:48
So if I want to update all components - specifically decocare - so I just re-run the setup script? I don’t need the loop re-installed, just that particular part. But I’d also like to know what the “right way” is to keep all the components up to date.
emsamom
@emsamom
Oct 27 2016 01:00
ARGH! I have a Dexcom with share receiver - but it won't work with my G5 transmitter. I never even tried to set it up when I got my G5 transmitter.... now I need to decide if I want to fight for the G5 receiver to drive my rig offline (ON A PLANE)
Paul Martin
@Spazholio
Oct 27 2016 01:01
Well…you can upgrade the G4 w/Share receiver to a G5 one. But it’s a one-way thing - if you do that, you’re stuck with it.
emsamom
@emsamom
Oct 27 2016 01:02
oh really?
how does that work?
I trade it in? or is it a software update?
But!
You have to have an auth code.
I believe you get it directly from Dexcom.
emsamom
@emsamom
Oct 27 2016 01:03
hmmmmm. Tech guy I talked to at Dexcom told me I needed a new receiver. Now I feel mislead :(
Paul Martin
@Spazholio
Oct 27 2016 01:04
He might have been wrong, or I might be. I just know that I have the option to upgrade my G4 w/Share receiver, and I’ve heard it said many times in this channel.
Scott Leibrand
@scottleibrand
Oct 27 2016 01:04
Yeah, it has to be Share though. Old G4 receivers can't do Bluetooth.
emsamom
@emsamom
Oct 27 2016 01:05
It's definitely Dexcom with Share - says it right on the receiver
Guess I'll try that this evening.
Paul Martin
@Spazholio
Oct 27 2016 01:06
Again, you’ll need to have an auth code from Dexcom, if you don’t have one already.
@scottleibrand Will the new setup script be able to JUST upgrade all my packages and not re-install the openaps directory? I’ve never run it twice, and really don’t want to overwrite anything.
emsamom
@emsamom
Oct 27 2016 01:07
yep, will figure that bit out too.... any reason why I might want to go back?
Been pretty happy with the G5 transmitters (honestly can't remember why I upgraded)
@Spazholio I ran it twice and it checked to see what existed. I don't think it overwrote anything that was already there
Scott Leibrand
@scottleibrand
Oct 27 2016 01:08
@Spazholio you can just run quick-packages for that.
emsamom
@emsamom
Oct 27 2016 01:08
except for the bits that I responded differently to the second time
Scott Leibrand
@scottleibrand
Oct 27 2016 01:08
Which I think just runs pip install. So maybe just pip install -U openaps or similar.
Paul Martin
@Spazholio
Oct 27 2016 01:12
Ahh, gotcha, thanks. For some reason, I thought the setup script did the software install as well. Forgot it was a two-step process.
Matthew Williams
@mwilliams
Oct 27 2016 01:15
@scottleibrand Any chance to quickly assist getting glucose data uploaded to NS appropriately with the dev branch of oref0 leveraging the ns device rather than ns-upload? Any report examples or aliases I could peek at on a repo somewhere?
Kevin Marshall
@ruess
Oct 27 2016 01:20
does anyone know if there’s a similar project to loopkit for android going on?
loop i mean
Matt Walker
@walker0
Oct 27 2016 01:23
There is HAPP which is a very similar project but mostly open loop at this point
Kevin Marshall
@ruess
Oct 27 2016 01:24
ahh gotcha - so loop is closer to closing the loop than HAPP?
Matt Walker
@walker0
Oct 27 2016 01:24
Loop is full closed loop
Kevin Marshall
@ruess
Oct 27 2016 01:24
i see
Scott Leibrand
@scottleibrand
Oct 27 2016 01:24
@mwilliams check out the oref0-setup branch of oref0
Kevin Marshall
@ruess
Oct 27 2016 01:24
and as far as you know, is loop algorythmically aligned with the Pi openaps project?
or are they separate approaches?
Scott Leibrand
@scottleibrand
Oct 27 2016 01:25
they're a bit different
particularly around meals
Paul Martin
@Spazholio
Oct 27 2016 01:25
@scottleibrand Ok, I ran that and it doesn’t seem to be updating decocare. I think that’s because I have decocare (0.0.31-dev) installed. If I wanted to go back to master, how would I do about that? sudo pip install -U decocare#master?
Scott Leibrand
@scottleibrand
Oct 27 2016 01:25
worth a try
Matthew Williams
@mwilliams
Oct 27 2016 01:25
@scottleibrand Can I simply re-run the setup script over my existing openaps install? Or should I just start fresh from that branch (which shouldn't be much work)
Paul Martin
@Spazholio
Oct 27 2016 01:26
hehe
Matt Walker
@walker0
Oct 27 2016 01:26
It is quite different in terms of the algorithm but you can get fairly similar results with both. Loop is a bit more sensitive to your meal related parameters. I:C DIA etc
Kevin Marshall
@ruess
Oct 27 2016 01:26
gotcha - if you had to sum it up in a sentence, how do they differ when appproaching meals?
Scott Leibrand
@scottleibrand
Oct 27 2016 01:26
@mwilliams I would do it with a different directory from what you already have
Matthew Williams
@mwilliams
Oct 27 2016 01:26
@scottleibrand Sounds good, here I go!
Scott Leibrand
@scottleibrand
Oct 27 2016 01:27
Loop makes an explicit up-front prediction about carb absorption. oref0 AMA takes a wait and see approach.
Kevin Marshall
@ruess
Oct 27 2016 01:27
@walker0 - sensitive meaning that it does adjust well to big meals?
Scott Leibrand
@scottleibrand
Oct 27 2016 01:27
so for Loop to work well, the up-front prediction has to be spot-on
Kevin Marshall
@ruess
Oct 27 2016 01:27
hmm. . that’s interesting @scottleibrand
Paul Martin
@Spazholio
Oct 27 2016 01:27
No go. Still on the dev branch. It looks like @bewest committed the decocare >6.3u/hr change, which is why I’m looking to update.
Scott Leibrand
@scottleibrand
Oct 27 2016 01:27
try updating your dev branch? I think he did a release of decocare, but not sure
if not, you can uninstall the pip version and install it the way quick-src.sh does
(check out the appropriate branch and setup.py develop)
Kevin Marshall
@ruess
Oct 27 2016 01:28
gotcha @scottleibrand - just getting started and deciding which way to go first. I like the potential of Loop and the freedom from the Pi that it offers in terms of less hardward, but thinking it might be best to start with the Pi approach and learn as much as I can there
any suggestions?
Scott Leibrand
@scottleibrand
Oct 27 2016 01:29
that is indeed a very good approach. also look at the 915MHz Explorer board with the Edison
that solves most of the mobility and rig size concerns
Paul Martin
@Spazholio
Oct 27 2016 01:29
Ok, it looks like the change is in both dev and master. But running sudo pip install -U decocare keeps saying that it’s already up to date. But….the one change that I’m looking for isn’t in there, so I really don’t think I am. I’d prefer to keep doing everything via pip if possible. I suppose I could try removing and reinstalling, but that feels…wrong.
Matt Walker
@walker0
Oct 27 2016 01:30
@ruess Loop does have retrospective correction now which definitely helps with meals not being aligned quite right to settings but AMA and autosens are more sophisticated than loop. I use loop because it is way more convenient for me and I like the ability to see everything easily on the iPhone screen without the slow loading of nightscout and the reliance of online.
Scott Leibrand
@scottleibrand
Oct 27 2016 01:30
at some point someone will get oref0 ported to Loop, at which point you'll have to option of running the more forgiving algorithm with the awesome iOS UI
@Spazholio check the pip repo to see when the latest version was released
Kevin Marshall
@ruess
Oct 27 2016 01:31
@scottleibrand will do - does the 915MGz Explorer replace the Pi? I currently have purchased a Pi and a Rileylink
Paul Martin
@Spazholio
Oct 27 2016 01:31
I can google it, but….so you know the command for that? I’m somewhat pip-ignorant.
Kevin Marshall
@ruess
Oct 27 2016 01:32
@walker0 - that does sound convenient for sure. I also like the idea of not having to rely on nightscout if I’m offline
Scott Leibrand
@scottleibrand
Oct 27 2016 01:32
for a good overview of how hard it is to tune Loop to be exactly right for meals, check out the recent convo in https://gitter.im/LoopKit/Loop
lots of people do get it right, and it's extremely powerful if you do. but it's not as forgiving until then.
Kevin Marshall
@ruess
Oct 27 2016 01:33
how have your results been however, BG wise compared to how they were with oref0 @walker0 ?
Scott Leibrand
@scottleibrand
Oct 27 2016 01:33
yes, the Edison+Explorer replaces the Pi (or rather supplements it by giving you a second mobile rig)
you can still use the Pi bedside
@Spazholio I just googled "pip decocare"
Paul Martin
@Spazholio
Oct 27 2016 01:34
OH! Sorry, I thought you meant using the pip command somehow. Sorry, apparently critical thinking isn’t my forte tonight.
Kevin Marshall
@ruess
Oct 27 2016 01:34
@scottleibrand - sounds good Scott -thanks
Scott Leibrand
@scottleibrand
Oct 27 2016 01:34
but I don't see a date on that
if that version doesn't have the fix, he may not have released it yet
or maybe you have two versions installed
Paul Martin
@Spazholio
Oct 27 2016 01:36
So I may have to pull from the git repo directly. shrug If it has to happen, it has to happen. =)
Kevin Marshall
@ruess
Oct 27 2016 01:37
Just read some of the loop thread @scottleibrand - definitely looks complex. Dumb question, but is that project's goal to accommodate for boluses too as opposed to simply adjusting basal rates?
meaning is it trying to program boluses?
Scott Leibrand
@scottleibrand
Oct 27 2016 01:40
it does have a bolus wizard, but the user ultimately decides and has to authorize, just like with MDT's
Kevin Marshall
@ruess
Oct 27 2016 01:41
i see - so it's focused similarly on auto adjusting basal rates
Finally, anyone know of any open projects to get oref0 ported to loop?
Scott Leibrand
@scottleibrand
Oct 27 2016 01:44
Yes. And when there are no carbs involved, it basically does the exact same thing as oref0 did originally. It's missing a couple engagements I did for safety, but those are minor.
@beached is working on something...
I think he has a repo for it public.
Kevin Marshall
@ruess
Oct 27 2016 01:45
gotcha - will check it out!
Scott Leibrand
@scottleibrand
Oct 27 2016 01:45
He's starting with a C++ port IIRC
Kevin Marshall
@ruess
Oct 27 2016 01:46
nice
Paul Martin
@Spazholio
Oct 27 2016 01:52
echo ‘{ “temp”: “absolute”, “rate”: 7.1, “duration”: 10 }’ | openaps use pump set_temp_basal <— shouldn’t that work to test the command via command-line?
And I just noticed - ever since upgrading everything, I’m now getting the following in ns-loop.log:
==> /var/log/openaps/ns-loop.log <==
ns://JSON/shell/cgm/ns-glucose.json
No JSON object could be decoded
Unknown request: oref0_glucose_since
TODO: improve help
openaps use ns shell get entries.json 'count=10'
openaps use ns shell upload treatments.json recently/combined-treatments.json

  -h                                  This message.
  get type args                                  Get records of type from
                                                 Nightscout matching args.

  upload endpoint file                           Upload a file to the Nightscout endpoint.
  latest-treatment-time                          - get latest treatment time from Nightscout
  format-recent-history-treatments history model - Formats medtronic pump
                                                 history and model into
                                                 Nightscout compatible
                                                 treatments.

  format-recent-type ZONE type file              - Selects elements from the
                                                 file where the elements would
                                                 satisfy a gap in the last 1000
                                                 Nightscout records.

  upload-non-empty-treatments file               - Upload a non empty treatments
                                                 file to Nightscout.
  lsgaps tz entries                              - Re-use openaps timezone device
                                                 to find gaps in a type (entries)
                                                 by default.
  upload-non-empty-type type file
  status                                         - Retrieve status
  preflight                                      - NS preflight
That seems peculiar, as I don’t recall anything upgrading that should have conked anything out.
Scott Leibrand
@scottleibrand
Oct 27 2016 01:57
assuming your quotes are normal and not "special", then yes, that might work. my mental syntax checker doesn't work quite as well as the computer's :)
looks like you downgraded oref0 somehow and lost oref0_glucose_since
@ruess https://gitter.im/openaps/oref0 is the chat room for the oref0 porting discussion
Paul Martin
@Spazholio
Oct 27 2016 01:59

The “set_temp_basal” line I actually found in the search - it was a comment from you. =) Unfortunately, it’s still not quite working.

And I just re-ran this: cd ~/src && git clone -b dev git://github.com/openaps/oref0.git || (cd oref0 && git checkout dev && git pull) and it’s still happening. =/

Scott Leibrand
@scottleibrand
Oct 27 2016 02:01
if you have an old version installed with pip it might take precedence
I would uninstall all versions, confirm with sudo updatedb && locate that they're gone, and then reinstall the preferred version
Paul Martin
@Spazholio
Oct 27 2016 02:01
Looking now...
Oddly enough, I’m also getting the following when running the quick-packages.sh script - do I care? :
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:

The following packages have unmet dependencies:
 nodejs-legacy : Depends: nodejs (>= 0.6.19~dfsg1-3~) but it is not going to be installed
 npm : Depends: nodejs but it is not going to be installed
       Depends: node-abbrev (>= 1.0.4) but it is not going to be installed
       Depends: node-ansi (>= 0.3.0-2) but it is not going to be installed
       Depends: node-ansi-color-table but it is not going to be installed
       Depends: node-archy but it is not going to be installed
       Depends: node-block-stream but it is not going to be installed
       Depends: node-fstream (>= 0.1.22) but it is not going to be installed
       Depends: node-fstream-ignore but it is not going to be installed
       Depends: node-github-url-from-git but it is not going to be installed
       Depends: node-glob (>= 3.1.21) but it is not going to be installed
       Depends: node-graceful-fs (>= 2.0.0) but it is not going to be installed
       Depends: node-inherits but it is not going to be installed
       Depends: node-ini (>= 1.1.0) but it is not going to be installed
       Depends: node-lockfile but it is not going to be installed
       Depends: node-lru-cache (>= 2.3.0) but it is not going to be installed
       Depends: node-minimatch (>= 0.2.11) but it is not going to be installed
       Depends: node-mkdirp (>= 0.3.3) but it is not going to be installed
       Depends: node-gyp (>= 0.10.9) but it is not going to be installed
       Depends: node-nopt (>= 3.0.1) but it is not going to be installed
       Depends: node-npmlog but it is not going to be installed
       Depends: node-once but it is not going to be installed
       Depends: node-osenv but it is not going to be installed
       Depends: node-read but it is not going to be installed
       Depends: node-read-package-json (>= 1.1.0) but it is not going to be installed
       Depends: node-request (>= 2.25.0) but it is not going to be installed
       Depends: node-retry but it is not going to be installed
       Depends: node-rimraf (>= 2.2.2) but it is not going to be installed
       Depends: node-semver (>= 2.1.0) but it is not going to be installed
       Depends: node-sha but it is not going to be installed
       Depends: node-slide but it is not going to be installed
       Depends: node-tar (>= 0.1.18) but it is not going to be installed
       Depends: node-underscore but it is not going to be installed
       Depends: node-which but it is not going to be installed
E: Unable to correct problems, you have held broken packages.
Scott Leibrand
@scottleibrand
Oct 27 2016 02:05
apt-get install -f or something to fix that? it usually tells you how to do it...
Paul Martin
@Spazholio
Oct 27 2016 02:06
I just know that node and nodejs and nodejs-legacy has some funkiness to it. Wasn’t sure what I was missing, or what SHOULD be installed.
garykidd
@garykidd
Oct 27 2016 02:08
@Spazholio can you confirm how you wired your charger circuit? I saw the duide online but I'm still a bit uncertain?
Matthew Williams
@mwilliams
Oct 27 2016 02:10
@scottleibrand Still only getting temp basal rates sent to NS on the oref0-setup branch, no glucose data. But, tired eyes, it's looping fine - so that works for me, and I'll have a nice overnight of temp basal rates at least in NS! I'll tackle glucose and pump status tomorrow I guess.
mwilliams @mwilliams eagerly awaits the Explorer board - this RPiZero is slowwwwwwwwww
Paul Martin
@Spazholio
Oct 27 2016 02:13
Ok, ran a few sudo npm commands, and that seems to have fixed it. AND I have a temp basal set at 6.65u/hr! WOOOO!
Scott Leibrand
@scottleibrand
Oct 27 2016 02:13
:+1:
@mwilliams be aware that there's a second loop directory it created, something like myopenaps-cgm-loop
Kevin Marshall
@ruess
Oct 27 2016 02:14
@scottleibrand thanks for the link!
Matthew Williams
@mwilliams
Oct 27 2016 02:14
@Spazholio Sounds like you're working with the new setup scripts as well in oref0's dev branch? Lemme know if you get glucose data uploading to NS :P - I've been trying to get there (though not very hard, just a few minutes here and there today)
@scottleibrand Hmmm ok, interesting, thanks for the heads up!
garykidd
@garykidd
Oct 27 2016 02:14
anybody know if you can put 4.7 to 5v in on J2 of breakout board for edison? or si that too much
maybe step down voltage with a few diodes?
Paul Martin
@Spazholio
Oct 27 2016 02:15
@mwilliams Yeah, I used the new setup scripts a few weeks ago and it’s been working great. When you say “glucose data” are you not using the Share bridge?
Matthew Williams
@mwilliams
Oct 27 2016 02:15
@Spazholio Nope - I'm using the enlite CGM
Paul Martin
@Spazholio
Oct 27 2016 02:16
I’m not going to be much help, unfortunately. I don’t know much outside of my own little environment, and I’ve never touched Enlite data. =/
Matthew Williams
@mwilliams
Oct 27 2016 02:16
yeah, seems like I'm the only enlite user! :) stares at the three dead Dexcom sensors in front of me
ok, well, 'night all, and happy looping
Scott Leibrand
@scottleibrand
Oct 27 2016 02:23
@mwilliams oh, enlite? not sure oref0-setup branch will work for uploading that
or rather, there's probably a few tweaks you'll need to make to get it working
jwedding
@jwedding
Oct 27 2016 03:21
Reminder! Tomorrow's DData event starts at 8!!!
Nate leads the day! Don't miss it.
Martin Haeberli
@mhaeberli
Oct 27 2016 03:24
@jwedding - sorry to miss it this year - thanks for the great event today!
redjujube
@redjujube
Oct 27 2016 03:33
@mwilliams I'm having the same problems not uploading glucose data to NS with a Medtronic pump/CGM
@scottleibrand Any ideas on the tweaks that might be needed for a Medtronic cgm/pump? I've been trying quite a few things with no luck so far. I can get data from the cgm into openaps, but it doesn't get to nightscout
Just a starting point would be great
David
@davidkeddydb
Oct 27 2016 03:58
trying to help a friend get openaps started. when we enter first line of set up curl -s https://raw.githubusercontent.com/openaps/docs/master/scripts/quick-packages.sh | bash - we are getting a bash line 3,4 sudo command not found. What did I screw up?
root@ubilinux:~# curl -s https://raw.githubusercontent.com/openaps/docs/master/scripts/quick-packages.sh | bash -
bash: line 3: sudo: command not found
bash: line 4: sudo: command not found
David
@davidkeddydb
Oct 27 2016 04:16
I just ran all of it as 1 offs vs bash and got it done. Thanks
Tim Street
@tim2000s
Oct 27 2016 05:30
@walker0 I moved across to Loop for the exact same reasons. I guess there are two approaches here. The first is to port oref0 to Loopkit (the most elegant, and one I'm currently trying to do, all be it v slowly) and the second is to build a console for OpenAPS that runs on an iPhone/Android phone and can use either Medtronic CGM or G5 CGM to feed OpenAPS in your pocket, both for display. Ultimately I think where we'll end up is with HAPP and Loopkit versions of oref0 talking from phones via RileyLink to Medtronic pumps, and an a port of the DanaR drivers to Loopkit for a version that doesn't need a RileyLink.
Kevin Marshall
@ruess
Oct 27 2016 05:47
glad to hear @davidkeddydb
Scott Leibrand
@scottleibrand
Oct 27 2016 05:49
@davidkeddydb you never installed sudo when setting up your edison?
Kevin Marshall
@ruess
Oct 27 2016 05:49
@tim2000s are you collaborating on your oref0 port to loop or have you started your own project?
Matthias
@ceben80
Oct 27 2016 05:54
But no need to perform sudo when you have a root login @davidkeddydb
Tim Street
@tim2000s
Oct 27 2016 06:43
Just doing some analysis at the moment @ruess , so going solo. Happy to get a group together. Progress will be a lot quicker.
Kevin Marshall
@ruess
Oct 27 2016 06:44
Cool - i was talking to @walker0 earlier about it as he’s started a project it seems - basic at this point
Dana Lewis
@danamlewis
Oct 27 2016 06:45
Also talk to @beached ^ he has also started digging in
Matt Walker
@walker0
Oct 27 2016 06:46
@ruess I'm no more progressed I've been busy learning the swift to do it with :smile:
Kevin Marshall
@ruess
Oct 27 2016 06:48
:thumbsup:
Matt Walker
@walker0
Oct 27 2016 06:49
And to answer your previous question about bg results, for me they perform fairly similarly. I do fire up my Edison every now and then just to run autosens to check that it agrees with what I've set
Kevin Marshall
@ruess
Oct 27 2016 06:52
Good to know that you’re getting fairly similar results @walker0
encouraging
David Young
@wgs4
Oct 27 2016 07:22
What is the correct port for mmeowlink on edison/explorer rig? I have been trying /dev/ttyMFD1 it fails. I know its not my sub_rfspy install, and I am certain I have the correct pump serial in the pump.ini file.
mmeowlink.exceptions.CommsException: Could not get subg_rfspy state or version. Have you got the right port/device and radio_type?
Tim Howard
@tghoward
Oct 27 2016 10:34
It is something like ttyspi5.1. We just got that in the docs, so check there too. Looking at the ports you'll see it there.
diabeticgonewild
@diabeticgonewild
Oct 27 2016 11:21
FML! Just puked my guts out! :-1:
I did manage to get a Zofran Orally Dissolving Tablet, 8 mg, dissolved under my tongue before it did happen. So that will help with the residual nausea post-vomiting, whatever the cause may be. But, it's probably courtesy of gastroparesis, plus being messed up from general anesthesia and surgery that I had on Monday.
Eric Jensen
@elnjensen
Oct 27 2016 11:28
Per the conversation about Loop and OpenAPS/oref0, last night I was feeling a little discouraged, wrestling with which I should be using (I've been working with both, lately more Loop), wishing there was a perfect system. And then this morning I took a step back and thought, how amazing is it that not only can I do this, but I have some choices about how exactly to do it! So thanks to everyone who has made that happen. Amazing what a good night's sleep and waking up at 100 will do for your state of mind. :smiley:
Tim Street
@tim2000s
Oct 27 2016 11:31
:+1:
So right @elnjensen
diabeticgonewild
@diabeticgonewild
Oct 27 2016 11:41

It looks like PiBakery should be recommended for setting up the Pi. It apparently really streamlines setup. BTW, the website where I found this article is really neat.

http://thenextweb.com/apps/2016/09/06/pibakery-makes-it-quicker-and-easier-to-get-started-with-raspberry-pi/

I'm not up to making a PR on the Docs right now. I don't feel well, and I haven't felt that great all week. It's because of the general anesthesia from the procedure I had on Monday, because my body sucks at regulating things because of autoimmune autonomic ganglionopathy/neuropathy.
albertotrg
@albertotrg
Oct 27 2016 12:05
@diabeticgonewild get well soon
Anybody knows where to buy a USB Carelink in Europe? It seems Adwdiabetes doesnt ship to EU
Sandra Keßler
@SandraK82
Oct 27 2016 12:09
@albertotrg don't use carelink, better to use ti USB
albertotrg
@albertotrg
Oct 27 2016 12:17
Thanks @SandraK82 for the advise. I'm buying HW for my first openAPS. Better to use ti USB? Same effort for setting up?
diabeticgonewild
@diabeticgonewild
Oct 27 2016 12:19
@albertotrg Thanks. It was a very minor procedure. Botox injections to my bladder. I think the medicine they gave me to prevent bladder irritation (Phenazopyridine) caused acute nausea and caused me to puke, based on how I timed that medication, and the sensations I was getting.
It's really rewarding because I can feel my bladder paralyzing right now! And the uncomfortable sensations that I constantly get (kind of like disruptive "constant chatter" between my bladder and brain) is really starting to go away. It was very successful in 2009 and 2010, but it didn't last as long as we wanted it to, so urologist thinks I might need a higher dose (but I haven't received it yet...). TMI, but I have urge incontinence and I have had multiple accidents per day, everyday, probably since age 4 or 5. I haven't had any leakage of urine whatsoever since the treatment, and I started to feel it once I woke up.
But, this particular issue was never addressed properly until I was an adult, when I actually started seeing a urologist for it, and was already diagnosed with other forms of autonomic neuropathy. Prior to this, when mentioned at the pediatrician and pediatric endo, it was "blamed on diabetes (high BGs...)" and "developmental issues". Somebody should have known better, along the way. It's really embarrassing and isolating and it dictates your life. It could have been treated. It's damaging to your self esteem to not treat it.
And it haunts you, because apparently in my case (prior to being diagnosed with a very rare neurological autoimmune disease) "it was caused by my diabetes"...
Sandra Keßler
@SandraK82
Oct 27 2016 12:24
@albertotrg the carelink has terrible range and seems to lock up quickly, so ti is a little bit harder as you need to flash it first... im preparing a order page for pre flashed ti sticks currently
diabeticgonewild
@diabeticgonewild
Oct 27 2016 12:25
If you have the TI flashing tool, it's just a matter of 1. installing the flashing tool drivers on your computer 2. Plugging in the Flashing tool to your computer 3. Plugging in the flashing tool to the TI stick in the correct orientation 4. Flashing the TI stick with the right firmware
It's not that difficult, in my opinion.
Sandra Keßler
@SandraK82
Oct 27 2016 12:28
not difficult but costly if you can not borrow a cc-programmer
Paul Martin
@Spazholio
Oct 27 2016 12:29
If anyone wants to send me any device for flashing, I've already spent the money on a CC debugger, and I've flashed (I think) every type of chip that we use out there. No cost other than shipping - just send me a message and we can set it up. I've done it for several people here already. =)
diabeticgonewild
@diabeticgonewild
Oct 27 2016 12:30
It's like $60. And you're going to be making multiple units that cost around $150 each. It's not that big of a price to pay for, considering that you are making a SYSTEM, iteratively making each unit better and better.
Paul Martin
@Spazholio
Oct 27 2016 12:30
Maybe true, but for quite a few people, they only make one rig, and an extra $60-$70 IS too much of an additional cost for a one-time-use device.
Sandra Keßler
@SandraK82
Oct 27 2016 12:33
and the ti usb is costs a lot if you buy it privatly in Europa, i can order it through my components Reseller and ship it flashed for i think 85 Euro
albertotrg
@albertotrg
Oct 27 2016 12:36
Sorry I have to read a lot yet. So you need to buy a SW to flash the firmware into the stick?
Sandra Keßler
@SandraK82
Oct 27 2016 12:37
no a hardware modul, called the cc-programemr or a compatible device
ist about 70-90 euros like the ti stick
albertotrg
@albertotrg
Oct 27 2016 12:39
I understand
And @SandraK82 when do you think you will have the order page avaliable? I might wait...
Will you ship to EU?right?
Sandra Keßler
@SandraK82
Oct 27 2016 12:41
i will announce it once it is completed, i hope to have all setup toda
albertotrg
@albertotrg
Oct 27 2016 12:42
Perfect!
David
@davidkeddydb
Oct 27 2016 12:49
@scottleibrand @ceben80 I apparently must have missed installing sudo somwhere? Not sure how, but I was logged in a root, so the curl would work given the underlying sudo in some of the installs, so I just did them as a one off and got it done. It would be good to have on this edison. Where can I get it to install it? I tried homebrew, but I didn't find it as an install option. Likely a rookie mistake on my part vs any problem with homebrew. I have been bouncing between a mac and a windows machine depending which route I think will be easier. I completely need a lesson on installing jubilinux from a mac. Thought I had it, but no dice and did the install via windows with ubilinux and then upgraded from there.
Matthias
@ceben80
Oct 27 2016 13:01
apt get install sudo :wink:
Diabetic_Dude
@diabetic_dude_twitter
Oct 27 2016 13:06
missing dependencies for sudo... root
Tim Street
@tim2000s
Oct 27 2016 13:08
@SandraK82 - must have got a bargain then. My cc-programmer was less than €50 and the slice of Radio I bought two of were about €12 each. I like the slice of radio with the Pi because it all fits in a smaller space.
David
@davidkeddydb
Oct 27 2016 13:09
@ceben80 If only it was all that easy! Thanks
C-Ville
@C-Ville
Oct 27 2016 13:17
@tim2000s looks like you were lucky enough to get slice of radios before the were sold out. ;-)
the other thing is that it the TI really has an unbeaten range. I can almost cover my appartment with just one TI
David
@davidkeddydb
Oct 27 2016 13:21
@ceben80 I get errors when attempting to install sudo:

Err http://http.debian.net/debian/ jessie/main libaudit-common all 1:2.4-1
Could not resolve 'http.debian.net'
Err http://http.debian.net/debian/ jessie/main libaudit1 i386 1:2.4-1+b1
Could not resolve 'http.debian.net'
Err http://http.debian.net/debian/ jessie/main sudo i386 1.8.10p3-1+deb8u3
Could not resolve 'http.debian.net'
Err http://security.debian.org/ jessie/updates/main sudo i386 1.8.10p3-1+deb8u3
Could not resolve 'security.debian.org'
E: Failed to fetch http://http.debian.net/debian/pool/main/a/audit/libaudit-common_2.4-1_all.deb Could not resolve 'http.debian.net'

E: Failed to fetch http://http.debian.net/debian/pool/main/a/audit/libaudit1_2.4-1+b1_i386.deb Could not resolve 'http.debian.net'

E: Failed to fetch http://security.debian.org/pool/updates/main/s/sudo/sudo_1.8.10p3-1+deb8u3_i386.deb Could not resolve 'security.debian.org'

E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing?

diabeticgonewild
@diabeticgonewild
Oct 27 2016 13:21
@davidkeddydb Thanks for mentioning the Windows Ubilinux install process. I haven't heard of any issues given people watch the videos I made. I made it pretty clear and easy to follow...
David
@davidkeddydb
Oct 27 2016 13:22
@diabeticgonewild Because they are awesome!
diabeticgonewild
@diabeticgonewild
Oct 27 2016 13:22
try sudo apt-get install --fix-missing
Diabetic_Dude
@diabetic_dude_twitter
Oct 27 2016 13:22
did you try an apt-get update ??
diabeticgonewild
@diabeticgonewild
Oct 27 2016 13:22
@davidkeddydb Thank you!
Paul Martin
@Spazholio
Oct 27 2016 13:23
Or check networking. Might be a DNS issue.
David
@davidkeddydb
Oct 27 2016 13:24
Trying again after fix missing and update
keep getting the same fetch error. I may log off and see if that makes any difference though I know it shouldn't
diabeticgonewild
@diabeticgonewild
Oct 27 2016 13:26
Weird.
cassknox
@cassknox
Oct 27 2016 13:27
Question, if I have my RPi hardwired into my work internet with an Ethernet cord, is there something I'm missing to ssh into it? My laptop can be hardwired in or on wifi but both ways it tells me: ssh: Could not resolve hostname raspberrypi.local: nodename nor servname provided, or not known
Paul Martin
@Spazholio
Oct 27 2016 13:27
@davidkeddydb What happens when you ping google.com?
David
@davidkeddydb
Oct 27 2016 13:29
Ahh frig. Well clearly I am connected to the outside world but my edison isn't. Argh. Thanks @Spazholio
Paul Martin
@Spazholio
Oct 27 2016 13:32
That's what I'm here for!
dons cape and flies away
You vastly underestimate my innate need to be online. =) I'm not going anywhere.
David
@davidkeddydb
Oct 27 2016 13:35
@Spazholi Thanks. I was just going to get sudo set and then work on network interfaces yet. Why is setting up a rig for friend going way easier than my install? I don't care and will take it!
Sandra Keßler
@SandraK82
Oct 27 2016 13:38
uhoh just found bad docs.. it is not allowed to sell the ti stick to private persons :/
David
@davidkeddydb
Oct 27 2016 13:38
And sudo installed. Thanks again
Paul Martin
@Spazholio
Oct 27 2016 13:38
@SandraK82 Wait, what?
@davidkeddydb No prob. =)
Sandra Keßler
@SandraK82
Oct 27 2016 13:39
the license from ti forbids Distribution to private persons and Usage in household Environments as this is test and experimental hardware
Paul Martin
@Spazholio
Oct 27 2016 13:40
So...I'm disallowed from selling my TI stick to another person?
Sandra Keßler
@SandraK82
Oct 27 2016 13:40
if i try to order more then one from my supplier i have to provide written conscent that i read and aknowledge the license
yes and if you are not a trained technical person it was event not allowed to sell it to you by ti licence and us law
Paul Martin
@Spazholio
Oct 27 2016 13:42
I went to TI's site, clicked it, and bought it. No mention of training or anything like that. Odd.
Admittedly, this was months ago, so...
Sandra Keßler
@SandraK82
Oct 27 2016 13:42
are you in the us?
Paul Martin
@Spazholio
Oct 27 2016 13:42
I am, yes.
Sandra Keßler
@SandraK82
Oct 27 2016 13:42
okay maybe there are other rules applied, i can not order it from ti directly, i have to go through digikey or mouse to import it to europe
Paul Martin
@Spazholio
Oct 27 2016 13:45
I suppose I can see why they have restrictions in place, but requiring "training" seems to be unfairly maligning those who just want to tinker.
Sandra Keßler
@SandraK82
Oct 27 2016 13:45
maybe digikey support can help me :)
Paul Martin
@Spazholio
Oct 27 2016 13:46
"Oh yeah. We've seen that too. We don't care. Wanna buy 100?" =)
Sandra Keßler
@SandraK82
Oct 27 2016 13:46
if they say so, i will offer it :D
cassknox
@cassknox
Oct 27 2016 14:12
@Spazholio any ideas to how to get into my Pi when its hooked to an ethernet cable for internet?
David
@davidkeddydb
Oct 27 2016 14:25
@cassknox Do you have your network interfaces set up correctly?
Paul Martin
@Spazholio
Oct 27 2016 14:25
@cassknox What's the name of your Pi? You should be able to ping <pi_name>.local
Chris Oattes
@cjo20
Oct 27 2016 14:25
The TI thing'll be something to cover themselves probably
Paul Martin
@Spazholio
Oct 27 2016 14:26
:thumbsup:
I'd be really surprised if it's enforced, but there just for legal CYA.
David
@davidkeddydb
Oct 27 2016 14:26
@cassknox This is a good overview. If you have already set up right, then disregard http://raspberrypi.stackexchange.com/questions/11631/how-to-setup-multiple-wifi-networks
Chris Oattes
@cjo20
Oct 27 2016 14:27
I suspect they'd want people using their products for hobby stuff, because people using it for hobby stuff are likely to do it for a job too, and if they like their products it's more likely to be included in big products
cassknox
@cassknox
Oct 27 2016 14:28
@davidkeddydb my work wifi cannot be accessed as it is ultra secure so we decided to hardwire in using an ethernet port under my desk
Paul Martin
@Spazholio
Oct 27 2016 14:30
...ugh.
Wait...are you SURE you can't access the WiFi? I mean, we use some Cisco PEAP setup here that took me several days to connect to, but I finally got it. =) I mean, if you can use your phone on it, you can likely get the Pi connected.
cassknox
@cassknox
Oct 27 2016 14:34
@Spazholio yes I'm sure, our wifi is constantly changing passwords and everything
Paul Martin
@Spazholio
Oct 27 2016 14:36
That's unfortunate. Well, while it's plugged in via ethernet, you could set the Pi up as an AP hotspot, and connect your phone/tablet/laptop/whatever to it that way.
(please don't ask me how to do that, as I've never done it before) =)
cassknox
@cassknox
Oct 27 2016 14:36
I also spoke with 2 other people at my work- Ben West and Chris Hannaman and they told me there's basically no way to get on the wifi here
PieterGit
@PieterGit
Oct 27 2016 14:37
did anybody manage to get an Intel Edison working with 3.7V lipo and powerboost, and with a TI-stick and Dexcom G4 connected to USB? I tried powering the Edison from the powerboost 5V on J21 on the edison, but that seems not to work for accessing USB
Paul Martin
@Spazholio
Oct 27 2016 14:37
You work with those two?
Color me envious. =)
David
@davidkeddydb
Oct 27 2016 14:37
@cassknox If Ben and Chris are there, have them help you get it set. It would take them 30 seconds
@cassknox windows or mac?
Dana Lewis
@danamlewis
Oct 27 2016 14:37
Those two are currently in SF instead of SD ;)
cassknox
@cassknox
Oct 27 2016 14:37
Yes, unfortunately they both left for SF on Monday so I'm in the dark over here until they get back
mac
Paul Martin
@Spazholio
Oct 27 2016 14:37
@davidkeddydb Apparently they're the ones telling her it's not possible. =)
Chris Oattes
@cjo20
Oct 27 2016 14:38
cassknox: what's your job?
cassknox
@cassknox
Oct 27 2016 14:38
yes they told me getting on the wifi here is not possible, however I just had a new Ethernet port installed specifically for my Pi
Dana Lewis
@danamlewis
Oct 27 2016 14:38
Have you tried pancreabble as alternative for monitoring in meantime until internet gets sorted out? https://openaps.readthedocs.io/en/latest/docs/walkthrough/phase-1/offline-monitoring.html#pancreabble
David
@davidkeddydb
Oct 27 2016 14:38
@cassknox This guy says it can be done through bonjour. give it a shot https://pihw.wordpress.com/guides/direct-network-connection/
cassknox
@cassknox
Oct 27 2016 14:39
@cjo20 i work in customer operations
Chris Oattes
@cjo20
Oct 27 2016 14:39
and I guess that's one way to make sure wifi is secure, don't let anyone at all connect to it
diabeticgonewild
@diabeticgonewild
Oct 27 2016 14:39
But these bladder Botox injections that I had on Monday are really helping my self esteem and making me feel better about myself. Besides the fact that my bladder has calmed down and it feels "almost normal"...I want to do things to my appearance and like put on makeup again and stuff. It's amazing.
David
@davidkeddydb
Oct 27 2016 14:40
@cjo20 It is especially funny that you can't use your openaps of all things on their wifi
diabeticgonewild
@diabeticgonewild
Oct 27 2016 14:40
Well, why not just make a hotspot on your phone?
cassknox
@cassknox
Oct 27 2016 14:40
@danamlewis no, let me see if I can make that work
@davidkeddydb i know! you'd think of all places...
Paul Martin
@Spazholio
Oct 27 2016 14:41
@cassknox If it's just for monitoring and not tinkering, then can you keep NS up in a tab? Or like @danamlewis suggested - set up the Pebble?
diabeticgonewild
@diabeticgonewild
Oct 27 2016 14:41
You could get a Cricket (does not have tethering/hotspot on the plan, but you can use Cyanogenmod and get around it) or T-Mobile (there is a limit on data transmitted...but can work around it on Cyanogenmod)
Cyanogenmod is a modified OS for Android phones.
cassknox
@cassknox
Oct 27 2016 14:42
my NS is up, I have that on my computer
diabeticgonewild
@diabeticgonewild
Oct 27 2016 14:42
I mean, why not just have a phone with an unlimited plan?
cassknox
@cassknox
Oct 27 2016 14:42
NS is on both my laptop and my work computer
diabeticgonewild
@diabeticgonewild
Oct 27 2016 14:43
Just pay up the 60-95 dollars a month. Yes, it's a lot, but at least you aren't "tied down to anything"
cassknox
@cassknox
Oct 27 2016 14:43
I have the Pi hardwired but it is still not looping so I'm trying to ssh into it to see what the problem is
diabeticgonewild
@diabeticgonewild
Oct 27 2016 14:43
I would just run it from my phone. At least it's completely private and not shared by anyone.
Chris Oattes
@cjo20
Oct 27 2016 14:44
I'm not sure that "Just pay $x/month extra" is necessarily a viable solution for everyone
Iain
@iainct
Oct 27 2016 14:45
hi everyone, for no apparent reason my rig has started throwing this error
pi@slicapszero:~/slicaps $ openaps monitor-pump
pump://JSON/read_clock/monitor/clock.json
monitor/clock.json  raised  No acknowledgement from pump on wakeup. Is it out of range or is the battery too low?
Traceback (most recent call last):
  File "/usr/local/bin/openaps-report", line 8, in <module>
    execfile(__file__)
  File "/home/pi/src/openaps/bin/openaps-report", line 82, in <module>
    app( )
  File "/home/pi/src/openaps/openaps/cli/__init__.py", line 51, in __call__
    self.run(self.args)
  File "/home/pi/src/openaps/bin/openaps-report", line 75, in run
    output = app(args, self)
  File "/home/pi/src/openaps/openaps/cli/subcommand.py", line 52, in __call__
    return self.method.main(args, app)
  File "/home/pi/src/openaps/openaps/reports/invoke.py", line 40, in main
    output = task.method(args, app)
  File "/home/pi/src/openaps/openaps/uses/use.py", line 44, in __call__
    self.before_main(args, app)
  File "/home/pi/src/openaps/openaps/vendors/medtronic.py", line 63, in before_main
    self.check_session(app)
  File "/home/pi/src/openaps/openaps/vendors/medtronic.py", line 119, in check_session
    self.session = self.get_session_info( )
  File "/home/pi/src/openaps/openaps/vendors/medtronic.py", line 85, in get_session_info
    fields = self.create_session( )
  File "/home/pi/src/openaps/openaps/vendors/medtronic.py", line 107, in create_session
    self.pump.power_control(minutes=minutes)
  File "/home/pi/src/mmeowlink-source/mmeowlink/handlers/stick.py", line 217, in power_control
    raise CommsException("No acknowledgement from pump on wakeup. Is it out of range or is the battery too low?")
mmeowlink.exceptions.CommsException: No acknowledgement from pump on wakeup. Is it out of range or is the battery too low?
Chris Oattes
@cjo20
Oct 27 2016 14:46
iainct: is the battery low? Or have you moved the pump away from the openaps device?
Iain
@iainct
Oct 27 2016 14:46
my pump is in range and has plenty of battery...
diabeticgonewild
@diabeticgonewild
Oct 27 2016 14:46
It's not. But I think it's more practical. I wouldn't want my OpenAPS sharing a connection on the work servers. And would do anything to AVOID it.
David
@davidkeddydb
Oct 27 2016 14:47
If I am setting up local host and I have named it say DOG and I want to log into via ssh, then I would log in as ssh root@dog.local right?
diabeticgonewild
@diabeticgonewild
Oct 27 2016 14:47
Iain
@iainct
Oct 27 2016 14:48
@cjo20
pi@slicapszero:~/slicaps $ ls /dev/mme*
/dev/mmeowlink
Chris Oattes
@cjo20
Oct 27 2016 14:48
iainct: try moving the pump closer. If that doesn't work, try restarting the openaps
Iain
@iainct
Oct 27 2016 14:48
its really odd, its been working for months....
cassknox
@cassknox
Oct 27 2016 14:51
@davidkeddydb is bonjour something i need to download? I'm not familiar
David
@davidkeddydb
Oct 27 2016 14:51
@diabeticgonewild If I want to set it as a set name, vs a random ip from every network, I set that in /etc/hosts right? So do I not have this set right? 127.0.0.1 localhost myaps
::1 localhost ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
Paul Martin
@Spazholio
Oct 27 2016 14:51
@davidkeddydb Maybe use the pi user instead of root if it's not working? Some distros disable direct roor access like that out of the box - can't recall if Pi does that.
diabeticgonewild
@diabeticgonewild
Oct 27 2016 14:51
You need bonjour on Windows to SSH via a hostname
David
@davidkeddydb
Oct 27 2016 14:51
I am using edison
Paul Martin
@Spazholio
Oct 27 2016 14:52
That too.
David
@davidkeddydb
Oct 27 2016 14:52
@cassknox This guy was using a mac
cassknox
@cassknox
Oct 27 2016 14:52
@davidkeddydb yeah that's what I'm using, but i searched my system for bonjour and nothing came up
Chris Oattes
@cjo20
Oct 27 2016 14:53
what? You don't need bonjour for DNS to work
diabeticgonewild
@diabeticgonewild
Oct 27 2016 14:53
Yes you do. For host names
Paul Martin
@Spazholio
Oct 27 2016 14:53
@cassknox Any chance you have a server outside of your work network you can use? Maybe where you have NS installed?
David
@davidkeddydb
Oct 27 2016 14:53
@cassknox If you have a OSX Mac you will have Bonjour running already. On Windows you can either install iTunes (if you haven’t got it) which also includes the service, or you can install it separately (via the Apple Bonjour Installer). Go to the page up above
diabeticgonewild
@diabeticgonewild
Oct 27 2016 14:53
On Windows Only
Iain
@iainct
Oct 27 2016 14:53
@cjo20 reboot didn't help but pulling the battery and reconnecting did... its very odd...
its died 3 times this morning and i decided to look into it now
Paul Martin
@Spazholio
Oct 27 2016 14:54
@iainct Every once in a while, the TI stick will get stuck in a state where ONLY a shutdown/restart will fix it. Reboot no worky.
diabeticgonewild
@diabeticgonewild
Oct 27 2016 14:54
@davidkeddydb On mobile phone. Can't copy and paste well. Look at install section on this page. It should be dependent on the "hostname" stuff
cassknox
@cassknox
Oct 27 2016 14:54
@Spazholio do you mean i can use my azure server?
Paul Martin
@Spazholio
Oct 27 2016 14:55
@cassknox Possibly. Maybe not today, because it will require you getting into the Pi to set this up, but you could do some sort of reverse SSH tunnel...
David
@davidkeddydb
Oct 27 2016 14:55
@diabeticgonewild Yeah, that is what I am doing but not working. I can ssh in via the ip of the edison no problem.
cassknox
@cassknox
Oct 27 2016 14:55
hmm okay, i have a MacBook running Sierra but when i put it into the search shows nothing
Iain
@iainct
Oct 27 2016 14:56
@Spazholio thanks for the tip, i wonder if something died as its worked beautifully for months... and now its gone into a bad state again....
cassknox
@cassknox
Oct 27 2016 14:56
@Spazholio okay, I may have to wait for Ben and Chris to get back and help me with that
Paul Martin
@Spazholio
Oct 27 2016 14:56
@iainct Mine will go for weeks without it having issues. Haven't seen a rhyme or reason, really.
Iain
@iainct
Oct 27 2016 14:57
@Spazholio what singleboard computer are you using? this is a pi zero
Sandra Keßler
@SandraK82
Oct 27 2016 14:57
@Spazholio ha digi has answered that it should be ok from their point of view :)
Paul Martin
@Spazholio
Oct 27 2016 14:58
@iainct Edison. How is your TI connected?
Iain
@iainct
Oct 27 2016 14:58
via a usbhub
but i've had great reliability until now...
PieterGit
@PieterGit
Oct 27 2016 15:00
@iainct how do you power your edison in order to use the ti by usb? Are you using > 7V on J21? I just connected a 9V battery to J21 and that way I can use lsusb to show connected usb devices
Iain
@iainct
Oct 27 2016 15:02
@PieterGit battery --> pi zero v1.3 --> 4port usbhub for v1.3 (pogo pin) --> ti stick
David
@davidkeddydb
Oct 27 2016 15:02
ok, so I set up localhost and put myaps after it. so when on the same network, I should be able to ssh root@myaps.local right? I get nada. ssh: Could not resolve hostname myaps.local: nodename nor servname provided, or not known
Iain
@iainct
Oct 27 2016 15:02

calculate-iob://JSON/shell/monitor/iob.json

module.js:340
    throw err;
          ^
Error: Cannot find module '/home/pi/slicaps/settings/profile.json'
    at Function.Module._resolveFilename (module.js:338:15)
    at Function.Module._load (module.js:280:25)
    at Module.require (module.js:364:17)
    at require (module.js:380:17)
    at Object.<anonymous> (/home/pi/src/oref0/bin/oref0-calculate-iob.js:43:22)
    at Module._compile (module.js:456:26)
    at Object.Module._extensions..js (module.js:474:10)
    at Module.load (module.js:356:32)
    at Function.Module._load (module.js:312:12)
    at Function.Module.runMain (module.js:497:10)
No JSON object could be decoded

Traceback (most recent call last):
  File "/usr/local/bin/openaps-report", line 8, in <module>
    execfile(__file__)
  File "/home/pi/src/openaps/bin/openaps-report", line 82, in <module>
    app( )
  File "/home/pi/src/openaps/openaps/cli/__init__.py", line 51, in __call__
    self.run(self.args)
  File "/home/pi/src/openaps/bin/openaps-report", line 75, in run
    output = app(args, self)
  File "/home/pi/src/openaps/openaps/cli/subcommand.py", line 52, in __call__
    return self.method.main(args, app)
  File "/home/pi/src/openaps/openaps/reports/invoke.py", line 48, in main
    reporters.Reporter(report, device, task)(output)
  File "/home/pi/src/openaps/openaps/reports/reporters/__init__.py", line 27, in __call__
    self.blob = self.serialize(data)
  File "/home/pi/src/openaps/openaps/reports/reporters/__init__.py", line 25, in serialize
    return self.method.serialize(render(data), self)
  File "/home/pi/src/openaps/openaps/vendors/process.py", line 56, in prerender_json
    return json.loads(data)
  File "/usr/lib/python2.7/json/__init__.py", line 338, in loads
    return _default_decoder.decode(s)
  File "/usr/lib/python2.7/json/decoder.py", line 366, in decode
    obj, end = self.raw_decode(s, idx=_w(s, 0).end())
  File "/usr/lib/python2.7/json/decoder.py", line 384, in raw_decode
    raise ValueError("No JSON object could be decoded")
ValueError: No JSON object could be decoded

pi@slicapszero:~/slicaps $ lsusb
Bus 001 Device 004: ID 7392:7811 Edimax Technology Co., Ltd EW-7811Un 802.11n Wireless Adapter [Realtek RTL8188CUS]
Bus 001 Device 003: ID 1d50:8001 OpenMoko, Inc.
Bus 001 Device 002: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
pi@slicapszero:~/slicaps $ ls /dev/mme*
/dev/mmeowlink
cassknox
@cassknox
Oct 27 2016 15:04
@davidkeddydb thats the same output i get trying to ssh into mine
David
@davidkeddydb
Oct 27 2016 15:05
I didn't go through that entire article I put up but I think it will help you as you have a direct connect. you are not going through wifi
I can hit the edison and log on via the ip, just not the localhost name
Scott Leibrand
@scottleibrand
Oct 27 2016 15:07
@cassknox how is your computer connected? Over the other Ethernet port?
Or over wifi?
Your corporate switch might prevent direct connections between Ethernet ports, in which case you'd either need to rely on NS, add your own little switch at your desk, or do something more complicated.
cassknox
@cassknox
Oct 27 2016 15:09
@scottleibrand its on gust wifi right now, but I can steal my ethernet cord from my desktop to use that if needed
I believe it's working now, as my pump is showing a temp basal
I just don't have visualization on my NS site saying I'm running a temp basal
PieterGit
@PieterGit
Oct 27 2016 15:10
powering a Intel Edison with 9V battery on J21 works! I can connect Dex G4 and read it!
diabeticgonewild
@diabeticgonewild
Oct 27 2016 15:12
@PieterGit do you need a 9V battery on an Explorer Board for the Edison to read a Dexcom receiver?!
Also can you give me a link to the battery you used, please? :D
PieterGit
@PieterGit
Oct 27 2016 15:14
it didn't work with PowerBoost 5V for me on J21. Option 2 of http://kiir.net/blog/turning-intel-edison-mini-breakout-board/
diabeticgonewild
@diabeticgonewild
Oct 27 2016 15:15
Thank you so much for the info!
David
@davidkeddydb
Oct 27 2016 15:15
is local host set anywhere else besides etc/hosts
diabeticgonewild
@diabeticgonewild
Oct 27 2016 15:16
Oh, awesome @PieterGit ! It uses a DISPOSABLE 9V battery! I like that (except for the cost and waste!!!)!
PieterGit
@PieterGit
Oct 27 2016 15:19
it probably also works with a rechargable 9V battery, im now seeing if i can also get the ti stick by USB. I use a cheap USB hub like this, with OTG adapter.
blob
diabeticgonewild
@diabeticgonewild
Oct 27 2016 15:20
That's awesome @PieterGit
David
@davidkeddydb
Oct 27 2016 15:23
I think I found out. Needed to get here and change it /etc/hostname, I was going to /etc/hosts
diabeticgonewild
@diabeticgonewild
Oct 27 2016 15:24
But yeah, I'm happier than I have been in a long time. Mostly because my bladder isn't running me all the time and it's working more like it should. I feel way, way more clean, as gross as if sounds. But, it's something I really didn't have control over, ever. Not good for anyone's self esteem.
@davidkeddydb that's why you double check your work, including confirming that you entered the right command–before you press enter.
David
@davidkeddydb
Oct 27 2016 15:27
@diabeticgonewild I hear you. I changed it there and it still did nothing. For some reason my localhost name is ubilinux. I can get there from ssh root@ubilinux.local Why when I change it I can't ssh in, I don't know
Iain
@iainct
Oct 27 2016 15:28
@PieterGit & @Spazholio after moving to my back up SD card and openaps build it looks ok, it looks like it may have been software corruption....
maybe!
David
@davidkeddydb
Oct 27 2016 15:28
I have changed it in hostname, It is definitely different. I can still log in via ssh root@ubilinux.local I am sure it is some newbie mistake I have made. I can help my friend get in, so it will work.
diabeticgonewild
@diabeticgonewild
Oct 27 2016 15:28
Weird. Maybe there's something with the Ubilinux distro. I would search Ubilinux AND "avahi" on google.
Scott Leibrand
@scottleibrand
Oct 27 2016 15:31
@davidkeddydb did you reboot after changing the hostname?
David
@davidkeddydb
Oct 27 2016 15:32
@scottleibrand I am doing that now as I think that is my screw up
And WE ARE IN. @scottleibrand I literally thought that as you were typing and sure enough. Now to install Openaps
PieterGit
@PieterGit
Oct 27 2016 15:57
@scottleibrand @oskarpearson : any news on how to procede with WW-pumps, see openaps/oref0#232 and oskarpearson/mmeowlink#51
PieterGit
@PieterGit
Oct 27 2016 16:22
if the other fix takes quite long, i would prefer that the 4 line workaround is temporarily implemented, see https://github.com/openaps/oref0/commit/522fc275f49dbebb135abb16bdc4895e12ba8413#diff-704a2fd9a43fd79bf52037b1668c146dL205
David
@davidkeddydb
Oct 27 2016 16:22
so does the loop continue to try different mmtune frequencies until it finds the right one?
trying to get my friends going and it is give me the old already in use exception /dev/ttyACM0
garykidd
@garykidd
Oct 27 2016 16:25
@davidkeddydb you could edit crontab and comment everything out to halt process....and then amanually run mmtune and then uncomment cron...if you really are anxious to get it rolling
C-Ville
@C-Ville
Oct 27 2016 16:27
@davidkeddydb I always copy my crontab into a file to stop, I just type crontab -r and to restart crontab <filename>
David
@davidkeddydb
Oct 27 2016 16:28
@garykidd @C-Ville so literally force the mmtune to go first and get set up
I just double checked I have his pump serial number right but I do
C-Ville
@C-Ville
Oct 27 2016 16:28
I currently have mmtune in my loop anyways, but this might be overkill
crontab -r will remove everything from crontab, therefore better to have all entries in a file
David
@davidkeddydb
Oct 27 2016 16:30
as of right now, i just have the standard from set up:
          • sudo wpa_cli scan
          • killall -g --older-than 15m openaps
          • cd /root/mbd1 && oref0-reset-git
          • cd /root/mbd1 && ps aux | grep -v grep | grep -q 'openaps get-bg' || $
          • cd /root/mbd1 && ps aux | grep -v grep | grep -q 'openaps ns-loop' ||$
          • cd /root/mbd1 && ps aux | grep -v grep | grep -q 'openaps autosens' |$
          • cd /root/mbd1 && ( ps aux | grep -v grep | grep -q 'openaps pump-loop$
so when I type openaps use pump mmtune I get an already in use exception thrown?
on dev/ttyACM0 which is where the TI stick is plugged in
David
@davidkeddydb
Oct 27 2016 16:35
Can I manually run mmtune a different way and I am just doing it wrong
David
@davidkeddydb
Oct 27 2016 16:41
Yeah, it just keeps cycling Starting pump-loop at Thu Oct 27 12:39:34 EDT 2016:
Radio ok, Listening: .No comms detected
Old pumphistory:
Error, retrying
Listening: .
And we are looping! Just took mmtune a bit. my buddy will be psyched
Paul Martin
@Spazholio
Oct 27 2016 17:17
I just ate lunch - I gave no bolus, but DID set Eating Soon mode which, combined with being able to set ridiculously high temps allowed me to stay under 135. I'm liking this so far. =)
Kevin Marshall
@ruess
Oct 27 2016 17:21
@danamlewis -woops - will switch back to this room - thanks for the update on the 900MHZ explorer block
Dana Lewis
@danamlewis
Oct 27 2016 17:21
:+1:
Kevin Marshall
@ruess
Oct 27 2016 17:21
so it comes pre-flashed correct?
Dana Lewis
@danamlewis
Oct 27 2016 17:21
you’ll still have to set up your edison and do stuff, but it’s not going to require a cc debugger
Kevin Marshall
@ruess
Oct 27 2016 17:22
oh nice - and just to confirm, I can’t use this with a Pi - I need an Edison?
Dana Lewis
@danamlewis
Oct 27 2016 17:22
yep. explorer board needs edison & a small lipo battery.
Kevin Marshall
@ruess
Oct 27 2016 17:22
ok . .well that may be the better route to go then
Dana Lewis
@danamlewis
Oct 27 2016 17:23
Pi is still good for a backup/home rig if you still want to do that. (w/ TI stick, and maybe someone will flash it for you). But explorer board is going to be the standard mobile rig for most people from here on out
Paul Martin
@Spazholio
Oct 27 2016 17:23
@danamlewis How does the Explorer compare to an Edison+serial TI when it comes to battery usage?
Colin Lennon
@colinlennon
Oct 27 2016 17:23
@Spazholio that sounds pretty cool. Did you need to edit the oref0 source to override the max temps?
Dana Lewis
@danamlewis
Oct 27 2016 17:24
@Spazholio mine is about 1/2 battery comparatively, but that’s because my board has a bug and that’s being fixed so should be closer to similar (~20 hours) usage on the prod run
Paul Martin
@Spazholio
Oct 27 2016 17:24
@colinlennon Nope, @bewest pushed the changes to the decocare repo last night.
@danamlewis Ok, cool. Thanks.
Colin Lennon
@colinlennon
Oct 27 2016 17:24
@Spazholio oh okay, interesting. I'll have a look
thanks
Paul Martin
@Spazholio
Oct 27 2016 17:24
I don't think the changes have made it to pip yet, so you might need to use the git repos directly.
Colin Lennon
@colinlennon
Oct 27 2016 17:25
:+1:
Scott Leibrand
@scottleibrand
Oct 27 2016 17:29
@Spazholio :+1: for unannounced meal testing
Paul Martin
@Spazholio
Oct 27 2016 17:30
Oh! Oh, that sounds better than my "Oh hell I'm hungry and forgot to set 'Eating Soon' mode earlier, ah well let's see what happens" name.
Paul Martin
@Spazholio
Oct 27 2016 17:36
:thumbsup:
David
@davidkeddydb
Oct 27 2016 17:51
@danamlewis The Debugger was my favorite and easiest part!
I have to read the docs on setting up the explorer board
Sandra Keßler
@SandraK82
Oct 27 2016 17:54
@/all ti usb stick for Europe pre flashed: http://bluetoolz.de/wordpress/product/ti-usb-stick/?lang=en
Eric Jensen
@elnjensen
Oct 27 2016 18:00
@Spazholio Out of curiosity, how many carbs in that lunch?
Scott Leibrand
@scottleibrand
Oct 27 2016 18:03
@davidkeddydb now it's just a single ccprog command that completes in about 60 seconds. :)
David
@davidkeddydb
Oct 27 2016 18:07
That and the new set up, hopefully have it done over lunch :)
We are all in @danamlewis envy. Will be great when they arrive so we can get started.
Paul Martin
@Spazholio
Oct 27 2016 18:10
@elnjensen I'd guess maybe 5-10-ish or so, since it was just a hamburger patty with some onions and some sauce my wife whipped up. It's the protein that I'm perpatually concerned with. Last time I had this burger, I didn't bolus and it spiked me surprisingly high.
Dana Lewis
@danamlewis
Oct 27 2016 18:11
@davidkeddydb we’ve been working really really hard to help make these boards a) a reality and b) shippped asap :)
David
@davidkeddydb
Oct 27 2016 18:21
@danamlewis The fact you guys will be making this a reality for so many of us this quick is mind blowing to me and everyone else.
Dana Lewis
@danamlewis
Oct 27 2016 18:23
:+1:
(This is one of those Thanks, Twitter! instances - that’s how the guy from Intel found us, we met him, he wanted to help, intro’d us to Morgan, offered to help fund dev to get the design figured out…a few months later = magic = and Explorer Boards are a thing :))
Luis Betancourt
@betluis
Oct 27 2016 18:25
@danamlewis , quick one. I am looking for a pump now. firmware 2.5b for a medtronics 723. do you know if it is ok?
Dana Lewis
@danamlewis
Oct 27 2016 18:25
If it is US-based, it’s not loopable.
Luis Betancourt
@betluis
Oct 27 2016 18:25
yes it is US based...
Dana Lewis
@danamlewis
Oct 27 2016 18:25
Ask sellers to put a battery in and look under Utilities->Connect Devices. If in that menu it says “PC Connect”, it will not work for looping.
Luis Betancourt
@betluis
Oct 27 2016 18:26
will do.. some 723 apparently then are not loopable right?
Dana Lewis
@danamlewis
Oct 27 2016 18:26
correct. that’s when they made the security changes.
Luis Betancourt
@betluis
Oct 27 2016 18:27
never mind. thanks.. will keep looking... kind of tough really
Bora Purutcuoglu
@ldpcloud
Oct 27 2016 18:29
Is there a specific Edison model needed for the Explorer board?
Darrell Wright
@beached
Oct 27 2016 18:29
I hate that they took the choice away on the newer pumps
Dana Lewis
@danamlewis
Oct 27 2016 18:29
@ldpcloud no. any Edison
Bora Purutcuoglu
@ldpcloud
Oct 27 2016 18:31
And a 2000 mAh lipo is good for it?
Kevin Marshall
@ruess
Oct 27 2016 18:31
have you tried http://www.searchtempest.com/ @betluis ?
helped me find one
Dana Lewis
@danamlewis
Oct 27 2016 18:33
@ldpcloud yea. that should get you a full day’s worth. if you want something longer (multiple days), go bigger, but that should be fine for most people and average use case
Luis Betancourt
@betluis
Oct 27 2016 18:33
@ruess Kevin, no.. I will thanks!
Dana Lewis
@danamlewis
Oct 27 2016 18:34
feel free to update the docs if several people have found success with a method of sourcing pumps
Kevin Marshall
@ruess
Oct 27 2016 18:34
:thumbsup:
Bora Purutcuoglu
@ldpcloud
Oct 27 2016 18:34
Got it. Thank you @danamlewis
Luis Betancourt
@betluis
Oct 27 2016 18:39
yes Dana, thanks. this is the second pump I am trying to get from medwow.. the first failed and I haven't been able to fix it... now when sending emails to all people offering pumps in medwow you get very few to no replies at all...
Dana Lewis
@danamlewis
Oct 27 2016 18:39
@betluis what was the error on the first pump?
Luis Betancourt
@betluis
Oct 27 2016 18:42
first I had a "failed button" issue which I fixed by cleaning the buttons removing the plastic and golden plate covers... but then after this was fixed the pump wouldnt recognize the tube filling process and will not allow me to continue. if pushing the button way longer than the first drop came out it will put itself into error mode (i dont remember the error code but can find out)
repeated this proces a few times but it didnt help
A33 I think it was
pump cant recognize the status of the reservoir
David
@davidkeddydb
Oct 27 2016 18:49
@betluis I will pm you. I know a guy who has a 722 he is trying to sell that is functional and he is an openaps user. He I think had it as a backup to his backup
Luis Betancourt
@betluis
Oct 27 2016 18:49
thanks David
albertotrg
@albertotrg
Oct 27 2016 19:52
@SandraK82: I'm interested in the preflash TI USB (so I dont need to buy the cc-debugger) but I don't know which firmware I should choose...which is the different between "subg_rfspy european firmare (WW models )" and the "subg_rfspy us firmware"?
Sandra Keßler
@SandraK82
Oct 27 2016 19:53
This depends on you pump
If it is a ww model choose European
It is located near the serial
Neal
@tnharvey
Oct 27 2016 19:54
@Spazholio does @cjo20 's Edison Voltage need to be installed into a particular folder? I downloaded it to a folder above my openAPS directory and ran sudo make install, and it returned
Makefile:5: *** missing separator (did you mean TAB instead of 8 spaces?). Stop.
albertotrg
@albertotrg
Oct 27 2016 20:06
@SandraK82 what "WW" stands for? Can you put an example of what I should look? ( a number? a legend?)
Sandra Keßler
@SandraK82
Oct 27 2016 20:08
There is a ref label on my 522 telling "REF MMT-522WWS" it's a world wide pump
albertotrg
@albertotrg
Oct 27 2016 20:16
Ok so for XXXWW I have to buy the European
and for a MMT-722LNAL?
R. Dennis Steed
@rdsteed
Oct 27 2016 20:18
NA - North American
Sandra Keßler
@SandraK82
Oct 27 2016 20:18
@rdsteed thanks
I have only one 522
albertotrg
@albertotrg
Oct 27 2016 20:22
Thanks!!
Paul Martin
@Spazholio
Oct 27 2016 20:35
@tnharvey Did you run make first? Can’t sudo make install until you make.
Neal
@tnharvey
Oct 27 2016 20:36
@Spazholio Hahah, no I did not
@Spazholio Okay, got the same response, so I feel only slightly less stupid =]
about the missing separator
Neal
@tnharvey
Oct 27 2016 20:42
I checked line 5 in the MAKEFILE, I'm seeing a tab, not 8 spaces, so I don't know why it would give that error. I checked the other lines too, same.
Paul Martin
@Spazholio
Oct 27 2016 20:47
That’s really peculiar.
Neal
@tnharvey
Oct 27 2016 20:52
I'll try a restart and see if that helps
Diabetic_Dude
@diabetic_dude_twitter
Oct 27 2016 20:56
I am making baby steps but I am still moving forward. I have data getting collected by mlab so I know my phone is uploading correctly and my mongodb is set up correctly. I have my config variables almost over set up in Heroku, I added the Enable config variable with bridge openaps pump careportal rawbg iob basil cob in the space next to it. I have API_SECRET set up with a super secret password. I have the MONGODB_URI set up along with BRIDGE_USER_NAME and BRIDGE_PASSWORD. but my site will not come up, it says application error check logs for details, but when I look at the logs they are BLANK! AUGH!

https://in10cgm.herokuapp.com/ ........Application Error
An error occurred in the application and your page could not be served. Please try again in a few moments.

If you are the application owner, check your logs for details.

Rachel Sandlain
@audiefile
Oct 27 2016 21:03
@diabetic_dude_twitter check the deployment from github. also check that your mono uri is correct.
diabeticgonewild
@diabeticgonewild
Oct 27 2016 21:05
I have been drinking fluids all day but like at 1:45 PM I drank like a 12 oz Coke Zero, and then at 2:15 I drank 8 oz of water...and BG is currently 394 mg/dL (go me! Just took a huge shot of insulin!!!)...and I still haven't needed to use the restroom yet and it's 4:04 PM here! I'm impressed! It was totally worth the hassle, including being intubated and being put in a drug induced coma (bleh...) for bladder Botox injections. Like this is only 80 hours or so after the procedure. Most people don't start feeling it until at least day 5 or day 7, and the full benefit is not noticed until 2 weeks post treatment. It's very rewarding and it's seriously a major confidence boost. I feel kind of normal for once, even though it's not abnormal thing to talk about...
But not running OpenAPS right now...😭
Chris Oattes
@cjo20
Oct 27 2016 21:57
@tnharvey Don't bother with the make install. Just run sudo make voltage (I think)
diabeticgonewild
@diabeticgonewild
Oct 27 2016 22:23
I'm starting not to feel well cause I'm super high. 😭
elenavilla
@elenavilla
Oct 27 2016 22:29
Hi, I updated to grilled cheese on this week, and the morning after doing it, I was able to see my temporal basals in Nightscout. Suddenly they stopped showing up after I manually entered 5 gram of carbs that I had eaten. I have not been able to see them again since that. Any help would be appreciated.
diabeticgonewild
@diabeticgonewild
Oct 27 2016 22:31
But I have brought OpenAPS into surgery 3 times this year. Shamefully, it has just been one of those years.
Where I have needed surgery...a lot...
Neal
@tnharvey
Oct 27 2016 22:38
@cjo20 just tried what you said, it gave to same response ((bout tabs and spaces). I may have made some other mistake, it's making me think I copied it incorrectly and it somehow changed the tabs to spaces. I used wget and just grabbed each file that way. Could that have messed it up somehow?
Chris Oattes
@cjo20
Oct 27 2016 22:38
not sure. I'd just use git to ge tit
John Benjamin
@Bender1061
Oct 27 2016 23:00
has anyone else noticed this. On my Edison with TI stick wired serially. If the Battery dies on it, Sometimes, the Loop stops working. On the pump-loop.log it will error out when getting the Pump History. I don't know exactly where it fails, I have not run it manually. But even if I cycle power on the APS rig, several times. Reboot and the like, it will not start working till, I take out the battery on the pump, and then replace it again. I'm wondering if the pump gets stuck in a send mode on the radio, and then does not respond correctly till I cycle power on the pump. Note it does do a pump mmtune without any issues.
it does not happen every time, just I've had this happen maybe 4 or 5 times in the past month.
diabeticgonewild
@diabeticgonewild
Oct 27 2016 23:02
Enable watchdog, perhaps?
John Benjamin
@Bender1061
Oct 27 2016 23:04
it's not the rig though, rig battery dies, I place in a new battery, rig is back up and running, but it is unable to talk to pump till i pull pumps battery out.
and this has happened on my 722 and 723
Scott Leibrand
@scottleibrand
Oct 27 2016 23:05
have you tried any of the device toggles on the pump to see if you can kick it out of tune-only mode?
John Benjamin
@Bender1061
Oct 27 2016 23:05
what do you mean by device toggles?
generally when this happens is if I'm going to bed and I look at nightscout at the end of the evening, and i see that the aps pill says an hour or so. So then I change battery cause the battery died. And most of the time, it starts back up and within a couple mins, I'm back with a temp basel.
diabeticgonewild
@diabeticgonewild
Oct 27 2016 23:10
Are you using rechargeable batteries in your pump? If so, I wouldn't recommend it. I tried doing that, and by charging the AAA Enelooo Pro batteries SLOWLY and it overall was NOT effective, despite best practices for preventing slow discharge.
I'm also an electrical engineering student...
John Benjamin
@Bender1061
Oct 27 2016 23:11
Unfortunately, I'm using the medtronic Carelink stick to upload my BG to nightscout, so I can't use the stale data alarm to tell me that the look stopped. but that is a whole other issue. right now it's interesting that the pump locks up if the battery died, and I don't know what command may have been running when the battery died
no @diabeticgonewild I use a lipo battery on my rig, but I use the energizer lithium batteries in my pump. I got super tired of changing batteries every couple days. And No the battery on the pump has not been low when this happens.
John Benjamin
@Bender1061
Oct 27 2016 23:16
this whole problem is by no means a huge issue. just wondering if anyone else has seen this. and hopefully if someone gets stuck with this issue, they may see my post about taking the battery out and back in on the pump to get looping again.
Dana Lewis
@danamlewis
Oct 27 2016 23:18
@Bender1061 have you tried pressing buttons on the pump to get it out of whatever state it is in?
John Benjamin
@Bender1061
Oct 27 2016 23:18
Cause I don't know about everyone else, but I hate not looping now. I hate that two hour period when I have to wet my enlite sensor.
diabeticgonewild
@diabeticgonewild
Oct 27 2016 23:18
There used to be an issue with the Carelink stick freezing...but I don't know the particulars about it. I use Energizer Lithuim Ultimates..
Dana Lewis
@danamlewis
Oct 27 2016 23:18
:+1:
John Benjamin
@Bender1061
Oct 27 2016 23:19
@danamlewis I know I've hit the button to turn on the backlight, and see if I was currently on a temp basel
Dana Lewis
@danamlewis
Oct 27 2016 23:20
did that help? or I wonder about running it through self test, etc. if that will revive it
I know not a fix, but wondering if we can learn more about what the technical issue is
John Benjamin
@Bender1061
Oct 27 2016 23:20
@diabeticgonewild yes those are what I use.. @danamlewis nope, I had to take the battery out on the pump.
Next time I see this, I will try the self test
now, has anyone else be able to setup the stale data alarm to worry about the OpenAPS pill data time
or how do others get notified if their rig is not looping
Paul Martin
@Spazholio
Oct 27 2016 23:28
@Bender1061 I know you say you reboot a few times, but do you ever do a full power-off-then-power-on?
I use Pushover to tell me when it hasn’t looped for 30 mins.
You’d better get looping as soon as you get that notification because it will…not…shut…up. Even acknowledging every alert - s’noisy. =)
John Benjamin
@Bender1061
Oct 27 2016 23:30
@Spazholio yes, rebooted and cycled power on the rig. And this only happens after a battery has died, and I hook up a second battery.
I have not had much luck on figuring out how to set things up for the pushover stuff, Unless I'm not seeing it in the docs
Paul Martin
@Spazholio
Oct 27 2016 23:32
Ok, so following the sequence of events: loop is running, battery dies, you plug it in to charge, but loop never resumes. But if the loop is running, battery dies, and you SWITCH the battery out, then it DOES start working again?
John Benjamin
@Bender1061
Oct 27 2016 23:35
rig is running, rigs battery dies. Plug in new battery into rig. Rig not looping (fails on getting pumphistory, does do a mmtune correctly). Wait 15 mins, see if it starts working. Does not. Cycle power, reboot using SSH. Same thing. Only starts working if I remove Pump battery and then place battery back in. then within a couple mins will have a temp basel started on pump.
this has happend on two different pumps. and it does not happen everytime the rig battery dies. That is what makes wonder if it's during a certain time or when a certain command is being sent to the pump that would put it in a locked out mode. so that only a pump power cycle fixes it.
Paul Martin
@Spazholio
Oct 27 2016 23:47
Oh! You have to reseat the pump battery. Yeah….yeah, that’s weird.