These are chat archives for nightscout/intend-to-bolus

31st
Oct 2016
garykidd
@garykidd
Oct 31 2016 00:01
edison@bluebird:~$ df -h
Filesystem       Size  Used Avail Use% Mounted on
/dev/root        1.4G  461M  855M  36% /
devtmpfs         482M     0  482M   0% /dev
tmpfs            482M     0  482M   0% /dev/shm
tmpfs            482M   13M  470M   3% /run
tmpfs            5.0M     0  5.0M   0% /run/lock
tmpfs            482M     0  482M   0% /sys/fs/cgroup
tmpfs            482M  8.0K  482M   1% /tmp
/dev/mmcblk0p7    32M  3.8M   29M  12% /boot
/dev/mmcblk0p10  1.3G  1.3G  4.0K 100% /home
tmpfs             97M     0   97M   0% /run/user/1002
edison@bluebird:~$ cd / && sudo du -xh -d 3 | egrep "[0-9][0-9][0-9]M|[0-9]G"
[sudo] password for edison: 
152M    ./var/cache/apt
156M    ./var/cache
315M    ./var
428M    .
rafaelmatuk
@rafaelmatuk
Oct 31 2016 00:06
@Spazholio so I ran the new scrip on a different folder, and apparently installed correctly. However, when I looked at my Cron I noticed several entries, all of them apparently running at the same time? ( *)
Paul Martin
@Spazholio
Oct 31 2016 00:07
Paste the entire cron?
rafaelmatuk
@rafaelmatuk
Oct 31 2016 00:09
.
Paul Martin
@Spazholio
Oct 31 2016 00:09
Mental note to self - when replacing the battery on an Edison, make sure ntp does its job, otherwise the loop gets very, very confused. =)
rafaelmatuk
@rafaelmatuk
Oct 31 2016 00:11
          • sudo wpa_cli scan
          • killall -g --older-than 15m openaps
          • cd /home/root/rmatukoref0 && oref0-reset-git
          • cd /home/root/rmatukoref0 && ps aux | grep -v grep | grep -q 'openaps get-bg' || ( date; openaps get-bg ; cat cgm/glucose.json | json -a sgv dateString | head -1 ) | tee -a /var/log/openaps/cgm-loop.log
          • cd /home/root/rmatukoref0 && ps aux | grep -v grep | grep -q 'openaps ns-loop' || openaps ns-loop | tee -a /var/log/openaps/ns-loop.log
          • cd /home/root/rmatukoref0 && ps aux | grep -v grep | grep -q 'openaps autosens' || openaps autosens | tee -a /var/log/openaps/autosens-loop.log
          • cd /home/root/rmatukoref0 && ( ps aux | grep -v grep | grep -q 'openaps pump-loop' || openaps pump-loop ) 2>&1 | tee -a /var/log/openaps/pump-loop.log
Paul Martin
@Spazholio
Oct 31 2016 00:13
That looks right. Each section is performing different aspects of the loop.
rafaelmatuk
@rafaelmatuk
Oct 31 2016 00:14
that is what I thought - I will run manually to confirm
Paul Martin
@Spazholio
Oct 31 2016 00:19
If you want, you can let cron execute them, and tail -f /var/log/openaps/*log to watch what it does and make sure everything is playing nicely.
rafaelmatuk
@rafaelmatuk
Oct 31 2016 00:20
that is what I will do - first I want to understand a bit more the new logic
garykidd
@garykidd
Oct 31 2016 00:21
A script to clean log files would rock
but if anyone can direct me...I'd greatly appreciate it.
Paul Martin
@Spazholio
Oct 31 2016 00:24
What does ls -Al /etc/logrotate.d/ show?
If there’s an openaps in there, I think it’s taken care of automagically.
Scott Leibrand
@scottleibrand
Oct 31 2016 00:41
@garykidd probably need to clean up that bluebird directory?
Cd there and run du -h. I suspect it's your .git (which won't show with the command you ran earlier)
tynbendad
@tynbendad
Oct 31 2016 00:43
@garykidd is /home supposed to be full?
Scott Leibrand
@scottleibrand
Oct 31 2016 00:44
No, that's what we're trying to fix.
Paul Martin
@Spazholio
Oct 31 2016 00:52
If you JUST want to see how large your .git dir is, just do a du -sh .git in your openaps directory.
OrlaWilson
@OrlaWilson
Oct 31 2016 01:22
Just solved my first looping problem, though Im mad it took me the few hours it did. I guess when the pump gives a low battery warning, nothing works?????! Doh. New battery, sorted.
Dana Lewis
@danamlewis
Oct 31 2016 01:23
Yep, because it turns off RF
OrlaWilson
@OrlaWilson
Oct 31 2016 01:23
Imso happy I figured it out!
Dana Lewis
@danamlewis
Oct 31 2016 01:27
:+1: also can't loop when square or dial wave bolus is going
mawhit
@mawhit
Oct 31 2016 01:27
@danamlewis is there a way to power cycle from the command line? if so, is that not already built into the code? i used the oref0-setup.sh.
Dana Lewis
@danamlewis
Oct 31 2016 01:29
There is oref0-reset-usb you can do
mawhit
@mawhit
Oct 31 2016 01:30
so that just resets the usb port?
Dana Lewis
@danamlewis
Oct 31 2016 01:30
It's not in setup script automatically since most are using that with TI or the like but you can add it into your cron
Yep
Usually does the trick
mawhit
@mawhit
Oct 31 2016 01:32
I'm already wanting to get a TI stick to replace the carelink. I can already tell i'm not going to like the range of the carelink.
Dana Lewis
@danamlewis
Oct 31 2016 01:36
:+1:
Dana Lewis
@danamlewis
Oct 31 2016 01:45
Btw if someone wants to write setup docs for Pi+TI for main OpenAPS docs, I'd be happy to phase out carelink as the main stick recommendation. We just need someone to PR the necessary notes about TI
So for anyone who is going to TI or recently did TI :smile:
garykidd
@garykidd
Oct 31 2016 02:00
edison@bluebird:~$ cd bluebird
edison@bluebird:~/bluebird$ du -h
4.0K    ./raw-cgm
196K    ./settings
12K    ./enact
4.0K    ./upload
4.0K    ./.git/refs/heads
4.0K    ./.git/refs/tags
12K    ./.git/refs
44K    ./.git/hooks
12K    ./.git/info
128K    ./.git/objects/ef
136K    ./.git/objects/1c
128K    ./.git/objects/27
128K    ./.git/objects/b8
160K    ./.git/objects/c3
128K    ./.git/objects/64
140K    ./.git/objects/31
156K    ./.git/objects/6d
160K    ./.git/objects/30
112K    ./.git/objects/4a
116K    ./.git/objects/47
136K    ./.git/objects/aa
160K    ./.git/objects/f8
132K    ./.git/objects/48
124K    ./.git/objects/55
144K    ./.git/objects/96
80K    ./.git/objects/a6
120K    ./.git/objects/d4
96K    ./.git/objects/71
156K    ./.git/objects/a1
108K    ./.git/objects/c5
112K    ./.git/objects/2b
116K    ./.git/objects/42
437M    ./.git/objects/pack
164K    ./.git/objects/91
136K    ./.git/objects/93
104K    ./.git/objects/9f
116K    ./.git/objects/3f
8.0K    ./.git/objects/info
96K    ./.git/objects/a4
120K    ./.git/objects/50
128K    ./.git/objects/73
180K    ./.git/objects/ca
132K    ./.git/objects/7c
112K    ./.git/objects/85
120K    ./.git/objects/d6
108K    ./.git/objects/4e
140K    ./.git/objects/4f
136K    ./.git/objects/c7
168K    ./.git/objects/4c
128K    ./.git/objects/0f
140K    ./.git/objects/33
132K    ./.git/objects/90
152K    ./.git/objects/44
152K    ./.git/objects/81
164K    ./.git/objects/21
108K    ./.git/objects/67
132K    ./.git/objects/ac
132K    ./.git/objects/77
112K    ./.git/objects/da
136K    ./.git/objects/0b
144K    ./.git/objects/8d
164K    ./.git/objects/2d
116K    ./.git/objects/7f
148K    ./.git/objects/28
116K    ./.git/objects/2e
168K    ./.git/objects/79
136K    ./.git/objects/bd
124K    ./.git/objects/fe
116K    ./.git/objects/5d
176K    ./.git/objects/0a
160K    ./.git/objects/39
132K    ./.git/objects/dc
148K    ./.git/objects/08
108K    ./.git/objects/f4
136K    ./.git/objects/c8
180K    ./.git/objects/53
148K    ./.git/objects/95
116K    ./.git/objects/ea
120K    ./.git/objects/82
144K    ./.git/objects/3c
104K    ./.git/objects/fa
132K    ./.git/objects/11
156K    ./.git/objects/f1
140K    ./.git/objects/a2
128K    ./.git/objects/19
164K    ./.git/objects/5e
120K    ./.git/objects/c0
136K    ./.git/objects/63
100K    ./.git/objects/88
120K    ./.git/objects/99
148K    ./.git/objects/2a
116K    ./.git/objects/5f
140K    ./.git/objects/fd
164K    ./.git/objects/ed
136K    ./.git/objects/15
124K    ./.git/objects/a7
152K    ./.git/objects/a9
116K    ./.git/objects/6f
128K    ./.git/objects/d5
164K    ./.git/objects/bb
132K    ./.git/objects/06
108K    ./.git/objects/66
124K    ./.git/objects/92
112K    ./.git/objects/10
120K    ./.git/objects/46
132K    ./.git/objects/52
144K    ./.git/objects/18
112K    ./.git/objects/d1
128K    ./.git/objects/df
116K    ./.git/objects/0c
132K    ./.git/objects/60
116K    ./.git/objects/3d
140K    ./.git/objects/5b
144K    ./.git/objects/04
132K    ./.git/objects/2f
160K    ./.git/objects/23
152K    ./.git/objects/59
136K    ./.git/objects/62
152K    ./.git/objects/83
160K    ./.git/objects/e2
96K    ./.git/objects/70
184K    ./.git/objects/a8
128K    ./.git/objects/8e
160K    ./.git/objects/a3
100K    ./.git/objects/e3
116K    ./.git/objects/13
108K    ./.git/objects/ad
112K    ./.git/objects/1b
88K    ./.git/objects/36
128K    ./.git/objects/26
176K    ./.git/objects/e7
128K    ./.git/objects/32
152K    ./.git/objects/98
136K    ./.git/objects/6a
124K    ./.git/objects/f0
144K    ./.git/objects/b6
132K    ./.git/objects/25
156K    ./.git/objects/9a
116K    ./.git/objects/65
120K    ./.git/objects/c1
116K    ./.git/objects/c6
100K    ./.git/objects/eb
96K    ./.git/objects/fc
140K    ./.git/objects/8c
104K    ./.git/objects/e9
96K    ./.git/objects/e4
132K    ./.git/objects/d2
160K    ./.git/objects/8a
108K    ./.git/objects/54
100K    ./.git/objects/ab
160K    ./.git/objects/b3
144K    ./.git/objects/17
104K    ./.git/objects/29
120K    ./.git/objects/0e
96K    ./.git/objects/1a
148K    ./.git/objects/1f
148K    ./.git/objects/bc
112K    ./.git/objects/f3
164K    ./.git/objects/ba
160K    ./.git/objects/89
116K    ./.git/objects/ce
112K    ./.git/objects/e1
172K    ./.git/objects/4d
152K    ./.git/objects/cb
164K    ./.git/objects/34
144K    ./.git/objects/1d
136K    ./.git/objects/ff
104K    ./.git/objects/45
120K    ./.git/objects/72
112K    ./.git/objects/3e
1
I'm thinking there is a way to delete in one fell swoop
Paul Martin
@Spazholio
Oct 31 2016 02:03
I see one directory in there with 437M. That’s big.
You could try a garbage collection. See if that helps.
garykidd
@garykidd
Oct 31 2016 02:04
470M    ./.git/objects
304K    ./.git/logs/refs/heads
308K    ./.git/logs/refs
588K    ./.git/logs
4.0K    ./.git/branches
471M    ./.git
132K    ./monitor
60K    ./cgm
472M    .
edison@bluebird:~/bluebird$
yeah ./.git/objects
Paul Martin
@Spazholio
Oct 31 2016 02:04
Try running git gc. Might take a few.
garykidd
@garykidd
Oct 31 2016 02:05
canb I just rm it ?
diabeticgonewild
@diabeticgonewild
Oct 31 2016 02:05
You need to confirm what's in it before removing directories...
garykidd
@garykidd
Oct 31 2016 02:05
edison@bluebird:~/bluebird$ git gc
fatal: write error: No space left on device
error: failed to run pack-refs
edison@bluebird:~/bluebird$
Paul Martin
@Spazholio
Oct 31 2016 02:05
I mean, you could. But you need to have a .git dir, and it’ll just have to be re-created.
@danamlewis @scottleibrand Is it ok to just nuke the .git dir and then re-init?
Dana Lewis
@danamlewis
Oct 31 2016 02:09
Yes by nuking and re running oref0-reset-git and it'll do it for you
garykidd
@garykidd
Oct 31 2016 02:10
andhow do I do that exactly?
Paul Martin
@Spazholio
Oct 31 2016 02:11
Do what?
Just remove the .git dir and then run oref0-reset-git in your openaps dir.
garykidd
@garykidd
Oct 31 2016 02:12
rm -rf bluebird...I mean of I am staritng over right
Paul Martin
@Spazholio
Oct 31 2016 02:12
You could just delete the .git dir.
I mean, you can start over if you like. Just re-run the oref0-setup.sh bit. Might be fine with just removing the .git dir though.
diabeticgonewild
@diabeticgonewild
Oct 31 2016 02:13
Anyway, I feel like I have the flu tonight, except I don't and it's just my body being evil to me. It's super distressing, but I feel better than I did a couple of hours ago. But, things have really turned around for me and I'm in a lot better of a mood overall. All it took was gaining some self esteem and feeling better about myself, after getting bladder Botox injections due to urge incontinence due to autoimmune autonomic ganglionopathy. I'm no longer using the bathroom like 30-50 times per day and having multiple accidents daily. Usually when I feel crappy in general I want to like kill myself due to my health problems coupled with my depression. I am actually able to now think that it's not worth killing myself over x/y/z, cause I actually have some self esteem now. Sad, but true.
It is what it is...
garykidd
@garykidd
Oct 31 2016 02:15
hmmm...still got same error
Paul Martin
@Spazholio
Oct 31 2016 02:15
?
What same error?
David Young
@wgs4
Oct 31 2016 02:35
Edison w/Explorer rig. Does the following diciate a successful connection to the pump?
root@wendyloop:~/wendy# openaps mmtune
mmtune: "916.636", 0, -99
Paul Martin
@Spazholio
Oct 31 2016 02:36
@wgs4 I don’t think so. That looks like it didn’t find the pump.
Dana Lewis
@danamlewis
Oct 31 2016 02:36
Why are you running mm tune separately?
David Young
@wgs4
Oct 31 2016 02:38
trying to figure out if I’m successfully talking to pump. and don’t really know what i’m doing. :-)
Dana Lewis
@danamlewis
Oct 31 2016 02:39
Run the loop and tail the log
David Young
@wgs4
Oct 31 2016 02:41
oot@wendyloop:~/wendy# tail -F /var/log/openaps/pump-loop.log
  File "/root/mmeowlink-source/mmeowlink/vendors/subg_rfspy_link.py", line 55, in __init__
    self.open()
  File "/root/mmeowlink-source/mmeowlink/vendors/serial_interface.py", line 27, in open
    self.check_setup()
  File "/root/mmeowlink-source/mmeowlink/vendors/subg_rfspy_link.py", line 71, in check_setup
    self.serial_rf_spy.sync()
  File "/root/mmeowlink-source/mmeowlink/vendors/serial_rf_spy.py", line 117, in sync
    raise CommsException("Could not get subg_rfspy state or version. Have you got the right port/device and radio_type?")
mmeowlink.exceptions.CommsException: Could not get subg_rfspy state or version. Have you got the right port/device and radio_type?
Error, retrying
Scott Leibrand
@scottleibrand
Oct 31 2016 02:43
Probably should comment out the crontab entry for the pump-loop and run things manually to avoid any conflicts over the radio.
David Young
@wgs4
Oct 31 2016 02:46
maybe I have nothing running…? This is my crontab.
NIGHTSCOUT_HOST=https://hidden.azurewebsites.net
API_SECRET=hidden
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
* * * * * sudo wpa_cli scan
* * * * * killall -g --older-than 15m openaps
#* * * * * cd /root/wendy && oref0-reset-git
#* * * * * cd /root/wendy && ps aux | grep -v grep | grep -q 'openaps get-bg' || ( date; openaps get-bg ; cat cgm/glucose.json | json -a sgv dateString | head -1 ) | tee -a /var/log/openaps/cgm-loop.log
#* * * * * cd /root/wendy && ps aux | grep -v grep | grep -q 'openaps ns-loop' || openaps ns-loop | tee -a /var/log/openaps/ns-loop.log
#* * * * * cd /root/wendy && ( ps aux | grep -v grep | grep -q 'openaps pump-loop' || openaps pump-loop ) 2>&1 | tee -a /var/log/openaps/pump-loop.log
@reboot cd /root/wendy && reset_spi_serial.py
how do I run it manually? just copy and past the line from crontab that I want to run?
Scott Leibrand
@scottleibrand
Oct 31 2016 02:49
Looks like it's already commented out. Yeah, copy and paste the part after all the *'s
Or just the main command
You don't want the output redirection to the log file
David Young
@wgs4
Oct 31 2016 02:50
what is main command?
Scott Leibrand
@scottleibrand
Oct 31 2016 02:50
And you can skip all the ps stuff if there's nothing already running.
David Young
@wgs4
Oct 31 2016 02:50
openaps pump-loop ?
Scott Leibrand
@scottleibrand
Oct 31 2016 02:50
Ya
David Young
@wgs4
Oct 31 2016 02:56
root@wendyloop:~/wendy# openaps pump-loop
Starting pump-loop at Sun Oct 30 22:50:59 EDT 2016:
Radio ok, Listening: .No comms detected
Old pumphistory: Refbash: line 0: test: ==: unary operator expected
pump-loop.log has the same list of errors as previous post
It went through the cycle 3 times, ran mmtune automatically, and same result
It mut be a configuration problem. Morgan had me switch from master to dev mmeowlink, and that seems to have gotten me further. But maybe there is still something I need to config...
Scott Leibrand
@scottleibrand
Oct 31 2016 03:05
Did you ever start over with oref0-setup on a freshly flashed edison?
The log file won't update as long as the cron is commented out. All the output will go to your screen unless you have the > redirect at the end.
You're describing a lot of the problems we had when setting things up manually the first time. I don't remember all the fixes, but I know we put them into oref0-setup.
David Young
@wgs4
Oct 31 2016 03:12
My edison was flashed by Morgan at Hackathon. He also flashed the Explorer board. When he left, I was fighting the wifi config, and got that setup right after he left. Then I installed openaps, and ran setup script, then installed MMeowlink, following the directions on github. It instructed to use the master, which is wrong for explorer board. Morgan said I should switch to dev branch and rebuild. I switched to dev branch, and ran pip install . That is how to rebuild correct? I no longer get the errors I was getting by doing that. Morgan reviewed my openaps.ini and pump.ini files and said they look correct.
Do you suggest I start from ground zero and reinstall Jubilinux? or just delete all the repo’s I’ve got installed and start from there ?
Scott Leibrand
@scottleibrand
Oct 31 2016 03:24
I would start over, yes. If you have a second Edison, you could set this one aside and start with it. Otherwise, assuming you've never gotten this one looping, I suspect you'll be able to get back to where you are (and hopefully all the way to looping) within a few hours once you manage to get it re-flashed.
David Young
@wgs4
Oct 31 2016 03:36
I’m going to order a couple more edisons. She will need a full backup ready to go, and I need an edison to keep at work for testing anyway.
Andrew
@paqman1098
Oct 31 2016 06:12
hello everyone, i am new to openAPS and just got my hands on a 522. i was wondering what batteries would you guys recommend that would be compact and last about a day or so. I'm also looking at going the ti stick route and wasn't sure exactly what part that is on TI's website. is it the evaluation module kit? i know i have a lot more reading to do but would like some quick help. thanks!
Tim Street
@tim2000s
Oct 31 2016 07:22
@paqman1098 What platform are you building on?
Andrew
@paqman1098
Oct 31 2016 07:23
@tim2000s Edison
Dana Lewis
@danamlewis
Oct 31 2016 07:53
@paqman1098 did you see the note in the docs about the Explorer board?
Andrew
@paqman1098
Oct 31 2016 08:01
@danamlewis no I didn't. I'll have to check it out. Thanks
Andrew
@paqman1098
Oct 31 2016 08:08
@danamlewis what exactly is the explorer board?
Andrew
@paqman1098
Oct 31 2016 08:30
@danamlewis I see now. Do you know when they are expected to ship?
John Kelleher
@jkelleher
Oct 31 2016 08:51
@PieterGit thanks but how do i change the device/port?
PieterGit
@PieterGit
Oct 31 2016 08:55
See dmesg for which port is used and edit it in pump.ini
John Kelleher
@jkelleher
Oct 31 2016 10:41
@PieterGit Sorry, dmesg? (assume full-noobie here!)
AdrianLxM
@AdrianLxM
Oct 31 2016 10:57
@jkelleher, dmesg is a standard linux tool to print the Kernel's message ring buffer. There will be logged e.g. when a new USB device gets connected.
David
@davidkeddydb
Oct 31 2016 13:25
@scottleibrand I helped a friend get his loop set up. It is now running. When we went through set up (we are using a G4 with readings from NS on an edison with a sparkfun board) I watched the var/logs and for literally 21 minutes we were getting dev/ttyACM0 already in use and then mmtune with whatever...and then listening....no comms, then pump history attempt to refresh, fail, etc etc. This would go on until the right mmtune, which in his case we got success at 916.684 5 -40 . His loop has been running now for about 48 hours. I am just nervous for when or if he has to power it down. Any suggestions of troubleshooting this type of thing, or anyway I can change Cron to get him there quicker? Thanks as always.
Paul Martin
@Spazholio
Oct 31 2016 13:28
@davidkeddydb My rig has this weird thing where when I plug it into the charger next to my bed, there's a chance that it will lose radio connectivity with the pump. Reboots don't help, messing with the pump doesn't help, a power-off/power-on might help, and it usually lasts for about an hour. I have no idea why it's happening. I feel your frustration.
David
@davidkeddydb
Oct 31 2016 13:32
@Spazholio I have been fortunate that it hasn't happen to me, but the one time I really helped someone else, it is all wacked out. Comedies could be written however about my experiences with network interface files and flashing microsd cards :)
TinaBerger
@TinaBerger
Oct 31 2016 14:50
Waiting on Edison and TI stick to ship. But in the meantime the Carelink gets hung up and we have to unplug and plug it back in to get going again. Constantly. We have two of them and they both do it. Anything we can do?
Matthew Williams
@mwilliams
Oct 31 2016 14:51
Ohhhh new GItter interface....
Sooooo - explorer boards start shipping tomorrow since it's November, right? :P
regretting only getting the Edison and not a break out board so I can start readying it
I just might need to get the minimal ordered via Prime
Paul Martin
@Spazholio
Oct 31 2016 14:59
@beached Any chance you could add some detailed instructions for the nightscout indicator package? I cloned the repo, but running the executable in there isn't working, and I'm not 100% sure what I'm missing. I tried to install with the setup.py file but that got me nowhere...
Darrell Wright
@beached
Oct 31 2016 15:00
try running the .py file. The other just makes it run in the background
Dana Lewis
@danamlewis
Oct 31 2016 15:08
@paqman1098 no, I haven't heard an exact ship date cc @mwilliams
Scott Leibrand
@scottleibrand
Oct 31 2016 15:08
@davidkeddydb one thing you could do if you're only running one loop is to remove the randomizer on loop fail to run mmtune after every failure
Dana Lewis
@danamlewis
Oct 31 2016 15:08
@TinaBerger have you power cycled the usb port? having that in your cron may help
Scott Leibrand
@scottleibrand
Oct 31 2016 15:08
*only one rig that is
Matthew Williams
@mwilliams
Oct 31 2016 15:12
@danamlewis Alrighty, just pulled the trigger then on the Sparkfun base block so I can get my Edison flashed and ready to hit the ground running when my Explorer board ships. My RPi setup with the CareLink has been a tad flaky with its connection, especially at night (lost sensor two nights in a row doesn't help either), ready to focus on the switch to the Edison and have a more friendly mobile setup (my RPiZero gets HOT and connectivity with CareLink stick, especially on the go is crazy spotty)
Dana Lewis
@danamlewis
Oct 31 2016 15:14
Good plan
Sorry I don’t have a clear idea on ship timeline about the boards. (notmycircusbutsortofmymonkeys)
Matthew Williams
@mwilliams
Oct 31 2016 15:15
No worries - I'm very familiar with the Hamshield folks (followed that project when it was on Kickstarter, I'm a ham), I know they ship :P - so not too concerned...
David
@davidkeddydb
Oct 31 2016 15:16
@scottleibrand How do I remove the randomizer on loop fail? which part of the Cron is it part of and I will have him give that a shot
Dana Lewis
@danamlewis
Oct 31 2016 15:16
:) Morgan’s been great to help us get this batch ordered ASAP, so I’m not worried, either. I know as soon as xray says they’re ok they’ll go in the mail!
Paul Martin
@Spazholio
Oct 31 2016 15:17

@beached Just running python nightscout_indicator.py gets me:

Traceback (most recent call last):
  File "nightscout_indicator.py", line 31, in <module>
    import gi
  File "/usr/lib/python3.5/site-packages/gi-1.2-py3.5.egg/gi/__init__.py", line 39
    print url
            ^
SyntaxError: Missing parentheses in call to 'print'

Uncertain which package that is. Is it gi?

Matthew Williams
@mwilliams
Oct 31 2016 15:17
@danamlewis not sure if you saw my Tweet yet (i just sent it, didn't realize you were active here at the moment), does the Explorer board have the stacking compatibility with the Sparkfun Edison stack boards?
Paul Martin
@Spazholio
Oct 31 2016 15:18
If so, how should one install that? I thought gi was provided by PyGObject, which I appear to have installed already.
Matthew Williams
@mwilliams
Oct 31 2016 15:18
I'd love to stack the OLED board on it and have a simple "Loop: Running, Wifi: <ssid>, NS Status: Sync'd" sort of display on it.
Paul Martin
@Spazholio
Oct 31 2016 15:18
@mwilliams :thumbsup:
Darrell Wright
@beached
Oct 31 2016 15:19
OK, I see that. delete that folder gi-1.2-py3.5.egg and just run it from the package folder. Ill fix that
Scott Leibrand
@scottleibrand
Oct 31 2016 15:20
@mwilliams yes, but only on one side. So It has to be the last board in the stack, on the opposite side from the Edison module itself. Not sure if your OLED board would have the same restriction: if so it wouldn't work.
Darrell Wright
@beached
Oct 31 2016 15:20
that is what I did at least
Dana Lewis
@danamlewis
Oct 31 2016 15:20
@mwilliams I did see it, it’s only stackable on one side
Scott Leibrand
@scottleibrand
Oct 31 2016 15:21
@davidkeddydb take a look at the contents of the pump-loop alias. You should be able to figure out what is what.
openaps alias show pump-loop
Paul Martin
@Spazholio
Oct 31 2016 15:21
@beached I think my system uses Python 3 by default. Should I be using Python 2? I mean, both give me errors, but I get different errors. =)
David
@davidkeddydb
Oct 31 2016 15:22
@scottleibrand Let's hope at this point, right. Will do. Thanks as always.
Darrell Wright
@beached
Oct 31 2016 15:23
@Spazholio bare with me, my python is weak. But the intall is broke and I am fixing that. but I had to delete the pulled in gi folder and then it worked. the script is python 3 though
Paul Martin
@Spazholio
Oct 31 2016 15:23

@beached Removed the directory indicated, and still using Python3. Getting this error:

Traceback (most recent call last):
  File "nightscout_indicator.py", line 43, in <module>
    gi.require_version('Gtk', '3.0')
AttributeError: module 'gi' has no attribute 'require_version'

I'm also running KDE, so requiring GTK might be an issue. =)

Hey, no sweat, take your time. Just wanted to report back. =)
Dana Lewis
@danamlewis
Oct 31 2016 15:26
@mwilliams have you used the OLED board before? curious how much battery it uses compared to an edison/TI or explorer board rig, for those who want an easier view of the status of the loop
Darrell Wright
@beached
Oct 31 2016 15:26
so the v3 of pygobject is installed? I had to install in apt python3-gi
garykidd
@garykidd
Oct 31 2016 15:28
I'd imagine you could also just designate certain leds for status of certian fuctions via gpio fairly easily....gotta be virtually no power draw that way and probably an easier minimalist approach
Matthew Williams
@mwilliams
Oct 31 2016 15:29
@danamlewis I've used this OLED board on my Onion Omega. https://wiki.onion.io/Tutorials/Expansions/Using-the-OLED-Expansion - It's very low power as far as I know. And I think once you write text to it, it just uses very minimal power to maintain the display state and you don't need to continuously having some process ensuring it's refreshing etc
Paul Martin
@Spazholio
Oct 31 2016 15:30
@beached Running arch here. Gimme a second - haven't updated anything in a while...
Dana Lewis
@danamlewis
Oct 31 2016 15:30
hm, cool. let me know if you end up using it once you get explorer board - that would be a great add to the docs for those who want to easily see status but don’t want to be ssh’ing in (or can’t)
Matthew Williams
@mwilliams
Oct 31 2016 15:30
Oh for sure, LED's would definitely do the trick, I've also thought about a simple RGB LED for a red (bad!)/yellow (running, but no wifi maybe?)/green (all is well!) scheme
I wonder if I could simply re-purpose the OLED expansion board for my Onion to the Edison, pin outs are complicated by any means
The Onion Omega is also a way cool little computing platform, though don't know if the board and OpenWRT build of Linux has the horsepower/builds of all the software dependencies
Though My Onion2 Plus should be here soon, 580MHz CPU, 128MB RAM, wifi, etc etc (plus my existing OLED board) - maybe it'd be worth a shot. https://www.kickstarter.com/projects/onion/omega2-5-iot-computer-with-wi-fi-powered-by-linux
mwilliams @mwilliams tries the current setup script on the original Onion for kicks, let's see how far it gets
Darrell Wright
@beached
Oct 31 2016 15:48
@Spazholio looks like there is more that one gi. The one it's pulling is for gists. ill have to find the correct one
@Spazholio or just pull it
Matthew Williams
@mwilliams
Oct 31 2016 15:49
npm installing oref0 now.... (though slowlllllllly, and I didn't install the Python deps yet) - would be very curious if this could run OpenAPS. My Onion board is roughly same size as the edison blocks and has the OLED expansion on it as well as built in battery charging for a lipo.
garykidd
@garykidd
Oct 31 2016 15:53
and $5?
jath622
@jath622
Oct 31 2016 15:54
Do I need to install the CarePortal part into NightScout to be able to see data if I move forward with OpenAPS?
Dana Lewis
@danamlewis
Oct 31 2016 15:54
yes, because that will enable you to toggle on basal rendering, enter data, etc.
@jath622 so you’ll want to turn it on, even if you don’t use it all the time, you won’t notice it if you don’t want it.
Matthew Williams
@mwilliams
Oct 31 2016 15:55
(This is definitely not a feature to anyone seeing this photo, nor is OpenAPS at all officially supported on the Onion platform! Just toying...) : http://i.imgur.com/qzgPOJ4.jpg
Paul Martin
@Spazholio
Oct 31 2016 15:55
@mwilliams Damn you, sir. =) Now I kinda want the Omega2 Plus AND all the docks...
Dana Lewis
@danamlewis
Oct 31 2016 15:55
haha :+1: for relevant disclaimers. nice!
Matthew Williams
@mwilliams
Oct 31 2016 15:56
I have 8gb USB storage in it right now, curious if on board storage (not a lot) could handle OpenAPS framework and USB could run the carelink
It's struggling on the oref0 npm install, so I don't think I'm going to get very far, though, this the original onion, specs are pretty weak
@Spazholio It's a neat little package for sure!
Eric
@ecc1
Oct 31 2016 15:58
Too little flash, and Bluetooth only via USB dongle are the disadvantages I see.
Matthew Williams
@mwilliams
Oct 31 2016 15:58
oof, only 16mb flash storage on this board
it's also running OpenWRT, so you're limited to opkg somewhat, no apt
Eric
@ecc1
Oct 31 2016 15:59
(but you can buy 10 for the price of an Edison :-)
Matthew Williams
@mwilliams
Oct 31 2016 16:02
and no pending 900mhz expansion board for it :)
it's many minutes into just installing share2nightscout, I think the board is tapping out, memory consumption is pegged, the system load is crazy high - nice effort Onion Omega!
Has anyone tried yarn (https://yarnpkg.com/) yet with oref0 vs npm? Not that many are frequently needing to run npm installs....
jath622
@jath622
Oct 31 2016 18:02
Is it true that I can only set up and use a IOB-COB website if using an Android, as you can't meet the req of enabling raw data with iOS?
Dana Lewis
@danamlewis
Oct 31 2016 18:03
that feels like a couple of different questions. When you say IOB-COB website, do you mean Nightscout?
jath622
@jath622
Oct 31 2016 18:03
Yes
diabeticgonewild
@diabeticgonewild
Oct 31 2016 18:05
The explorer board is going to rock.
Andrew
@paqman1098
Oct 31 2016 18:05
yeah it is. i can't wait
Dana Lewis
@danamlewis
Oct 31 2016 18:05
I’m not sure how IOB-COB has anything to do with raw data. You can set up Nightscout and use it regardless of what phone you have. I’m not sure of all the ways you can get raw BGs into Nightscout, but which CGM are you using?
jath622
@jath622
Oct 31 2016 18:06
Dex & I'm just reading thru the instructions of Grilled CHeese to set up the Care Portal.
Dana Lewis
@danamlewis
Oct 31 2016 18:06
G4 or G5 though?
(we don’t loop with raw data, btw. you can get it if you like it in general, but it won’t be used in looping)
jath622
@jath622
Oct 31 2016 18:08
G5 & iPhone 6s, not using receiver
diabeticgonewild
@diabeticgonewild
Oct 31 2016 18:18
I have the munchies from vaping. 😂 Whataburger Root Beer shake sounds like the best thing ever...
Andrew
@paqman1098
Oct 31 2016 18:18
haha watch that sugar
diabeticgonewild
@diabeticgonewild
Oct 31 2016 18:19
Hahaha yeah, Whataburger is really bad with that!
And I'm in the warmup for my sensor that I'm reusing...😭
Andrew
@paqman1098
Oct 31 2016 18:20
i've been trying to cut out almost all sugar. trying out the keto diet. been feeling a lot less hungry and taking a lot less insulin.
diabeticgonewild
@diabeticgonewild
Oct 31 2016 18:20
That's awesome!!!
Andrew
@paqman1098
Oct 31 2016 18:20
haha yeah those are the times you need to be careful
diabeticgonewild
@diabeticgonewild
Oct 31 2016 18:21
Yeah I can avoid eating when I'm high. But food tastes sooo good when you have the munchies.
Like I can resist and stuff...especially as I haven't felt that great lately, especially with respect to my stomach. Like puked a few times last week...
Andrew
@paqman1098
Oct 31 2016 18:22
yeah but it's actually amazing when you think about how many good food there are without carbs. like a good avocado with some salt, some bacon or some eggs with cheese...
ooh. something you ate?
diabeticgonewild
@diabeticgonewild
Oct 31 2016 18:25
Yeah I love avocado!!! 😍🤘
No, gastroparesis that is NOT due to T1D. And just had my gastric neurostimulator replaced like 3 weeks ago. A week before it got replaced...it died and it was dead for like a week. Of course the new neurostimulator is programmed to my old one's settings. But in my experience it takes 2-3 months after an adjustment is made to notice the changes.
So, even if you're like puking your guts up and you go in to see your GI doctor and they change the settings...it's 2-3 months to notice the physical changes to your nausea and vomiting.
Even though you can feel it sometimes when a setting is changed...pretty much instantaneously
Andrew
@paqman1098
Oct 31 2016 18:30
wow that sounds horrible. i hope i'm not prying, but is your implant in your stomach? is there a way to adjust the settings yourself and is there medicine to help with the nausea?
diabeticgonewild
@diabeticgonewild
Oct 31 2016 18:32
Not exactly. It would look something like this: http://www.bmiut.com/wp-content/themes/bmi/images/enterra-therapy.jpg
Andrew
@paqman1098
Oct 31 2016 18:32
oh i see. how long do those last?
diabeticgonewild
@diabeticgonewild
Oct 31 2016 18:33
You definitely are not able to adjust it yourself. It gets checked every 3-6 months at the GI doctor. But basically every appointment.
5-10 years
I had mine for 6.5 years.
Andrew
@paqman1098
Oct 31 2016 18:33
how old are you?
diabeticgonewild
@diabeticgonewild
Oct 31 2016 18:34
27
Dana Lewis
@danamlewis
Oct 31 2016 18:34
OT :rabbit: (this might be a better conversation for a private or another channel)
Paul Martin
@Spazholio
Oct 31 2016 18:34
Ok, what does the bunny signify there? I've seen it a few times. =)
Dana Lewis
@danamlewis
Oct 31 2016 18:35
It’s inspired by the use of a friendly raccoon in Slack to signify that a conversation is off topic or might be better suited for another channel. But there’s no :raccoon: so we chose a :rabbit: as a cute alternative.
Paul Martin
@Spazholio
Oct 31 2016 18:36
Ah! Gotcha.
diabeticgonewild
@diabeticgonewild
Oct 31 2016 18:36
Whatever. Going to smoke more pot.
Paul Martin
@Spazholio
Oct 31 2016 18:36
Thought it might have been a "bunny trail" or something. =)
Dana Lewis
@danamlewis
Oct 31 2016 18:37
@Spazholio :rabbit2: maybe that one for that? ;) (joking, that would get confusing fast)
@jath622 re: best ways for g5 and raw data into NS, I’d ask in CGMITC on Facebook, I can’t remember if the xdripG5beta or whatever iteration it’s at is pulling raw in to NS
Scott Leibrand
@scottleibrand
Oct 31 2016 18:38
@diabeticgonewild there are dozens or hundreds of people who read this channel, so we're trying to keep discussions in here on topic to things that will benefit everyone who's in the channel or will be reading the scrollback at some point. you can certainly talk to anyone you want about anything you want, but those kinds of conversations are best had in private messages or in another channel rather than being broadcast to everyone
diabeticgonewild
@diabeticgonewild
Oct 31 2016 18:39
Whatever
Andrew
@paqman1098
Oct 31 2016 18:39
right on
Diabetic_Dude
@diabetic_dude_twitter
Oct 31 2016 18:58
@danamlewis I am stuck just getting nightscout set up. This is not the place for nightscout help I am aware of that. I think my main issue is with my github repo
Dana Lewis
@danamlewis
Oct 31 2016 18:59
ok, you were asking about OpenAPS so just wanted to check! I think I saw Rachel helping you over in a Facebook thread, so I’d keep posting there for the best support re: NS
Diabetic_Dude
@diabetic_dude_twitter
Oct 31 2016 19:00
@danamlewis Rachel has been a huge help and I am continuing to work with her, just really getting discouraged.
Kelly Watson
@kellyisworking
Oct 31 2016 19:01
Where are you in setup @diabetic_dude_twitter?
Diabetic_Dude
@diabetic_dude_twitter
Oct 31 2016 19:01
@danamlewis can you point me to the openaps link that covers forking github.. I know it is simple but I think that is where my issues have originated. I deleted my original fork and want to start with making a new fork
Dana Lewis
@danamlewis
Oct 31 2016 19:02
new fork of openaps or of Nightscout? I just google and get github basics about forking, like this: https://guides.github.com/activities/forking/
diabeticgonewild
@diabeticgonewild
Oct 31 2016 19:02
You could search YouTube for that.
Kelly Watson
@kellyisworking
Oct 31 2016 19:02
Sorry, interrupting here but there's an easy button for deploying nightscout now that doesn't require forking
Dana Lewis
@danamlewis
Oct 31 2016 19:02
:+1: that was going to be my next comment @kellyisworking to see if @diabetic_dude_twitter had gotten that link to try yet :)
Diabetic_Dude
@diabetic_dude_twitter
Oct 31 2016 19:03
fork or nightscout.
Kelly Watson
@kellyisworking
Oct 31 2016 19:03
:)
Dana Lewis
@danamlewis
Oct 31 2016 19:03
Andrew
@paqman1098
Oct 31 2016 19:05
I tried deploying nightscout with be easy button but my website shows nothing. Going to go through all of the steps again and see what I'm missing. Has anybody had success with doing that from cold?
Kelly Watson
@kellyisworking
Oct 31 2016 19:05
Yes -
I'm going to do a little walkthrough video for this as it took us a couple hours to figure it out on heroku and it's easy peasy if you know the steps
Andrew
@paqman1098
Oct 31 2016 19:06
Thx
Dana Lewis
@danamlewis
Oct 31 2016 19:06
@paqman1098 I would ask Nightscout basic setup Qs in the CGMITC group on Facebook, that’s where the NS support crew is. Unless @kellyisworking or someone else jumps in and can help, but if you end up with crickets, I’d ask there :) next.
:raised_hands: :clap: @kellyisworking
Kelly Watson
@kellyisworking
Oct 31 2016 19:06
In the meantime...
John Kelleher
@jkelleher
Oct 31 2016 19:06
Hi, getting error when setting up Edison on Arduino break-out board and Carelink stick - says port not open. Have ran dmesg but lots reported - not sure what I'm looking for. Another suggested I specify the particular /tty/usb port on setup but not sure where to identify that port and where to edit this info into my setup?
Kelly Watson
@kellyisworking
Oct 31 2016 19:07
Where are you both @paqman1098 @diabetic_dude_twitter ? Very beginning?
Diabetic_Dude
@diabetic_dude_twitter
Oct 31 2016 19:07
ok just set up a new fork.
John Kelleher
@jkelleher
Oct 31 2016 19:07
Should say I have a CC1111 and Debugger so maybe go that direction (don't have Sparkfun base-board yet)
Dana Lewis
@danamlewis
Oct 31 2016 19:07
ooh Arduino + Carelink? Interesting choice. Is carelink plugged in? Try replugging in as a starter? @jkelleher
Kelly Watson
@kellyisworking
Oct 31 2016 19:07
Fork of what @diabetic_dude_twitter
Dana Lewis
@danamlewis
Oct 31 2016 19:07
@jkelleher yes I would start with the CC1111 instead of carelink, save you headaches short and longer term!
John Kelleher
@jkelleher
Oct 31 2016 19:07
@danamlewis yup, plugged in and re-plugged to test - am running openaps use pump model btw
Matthew Williams
@mwilliams
Oct 31 2016 19:08
why was I under the impression you couldn't use CareLink with the Edison?
(I think I may have read it in the MMeowlink wiki?)
John Kelleher
@jkelleher
Oct 31 2016 19:08
Here's the error I'm getting (after lots of py errors notific.):
serial.serialutil.SerialException: Attempting to use a port that is not open
@mwilliams hope not!
Andrew
@paqman1098
Oct 31 2016 19:09
@kellyisworking yep, I'm at the very beginning, just ordered equipment last night. I went through the steps on setting up my website but apparently missed something. You can pm me if you have time or have any suggestions
Matthew Williams
@mwilliams
Oct 31 2016 19:10
@jkelleher yeah - not meaning to scare you off :P https://github.com/oskarpearson/mmeowlink/wiki - I was reading point #3 which lead me that conclusion
Kelly Watson
@kellyisworking
Oct 31 2016 19:10
Cool. Okay - have you set up a heroku or azure acct yet? @paqman1098
Dana Lewis
@danamlewis
Oct 31 2016 19:11
Yep. Setup scripts should work to get a carelink up and running, but not if it’s not supported by your hardware (i.e. edison). But sounds like you have TI which is good (and better anyway for range & other reasons) @jkelleher @mwilliams
Matthew Williams
@mwilliams
Oct 31 2016 19:11
@jkelleher have you heard of the explorer board being offered? It's a board with a 900mhz radio and battery charging circuit that you mount the edison on and it replaces the need for the CareLink while giving you a way more powerful radio and receiver. https://enhanced-radio-devices.myshopify.com/products/900mhz-explorer-block-pre-order
Andrew
@paqman1098
Oct 31 2016 19:12
@kellyisworking no i haven't. maybe that's what i'm missing
John Kelleher
@jkelleher
Oct 31 2016 19:12
@mwilliams @danamlewis yes, will likely order an Explorer but got CC1111 as it was available - looks like I'll be going that route - hopefully it's ok with the Arduino breakout board...
Kelly Watson
@kellyisworking
Oct 31 2016 19:12
Also are you using G5? Also @danamlewis let me know if you want me to take this to another room/pm if cluttering :)
That was to you @paqman1098 about g5
Dana Lewis
@danamlewis
Oct 31 2016 19:13
@kellyisworking if ya’ll can handle it, keep going :) or you can try nightscout/public if it gets to be a headache in here.
Matthew Williams
@mwilliams
Oct 31 2016 19:13
@jkelleher Good luck, I have an Edison sitting next to me waiting for my explorer board to ship (and just ordered a base board from Sparkfun so I can get it flashed and ready for the explorer board). Nice improvement over my current setup for sure!
Dana Lewis
@danamlewis
Oct 31 2016 19:13
@jkelleher yes, try setup with the TI + arduino breakout board. Not sure i’ve heard of anyone using that yet, but if it works with Edison it should be workable. @mwilliams
John Kelleher
@jkelleher
Oct 31 2016 19:15
Anyone using an Arduino breakout board with OpenAPS? https://www.sparkfun.com/products/13097
diabeticgonewild
@diabeticgonewild
Oct 31 2016 19:15
Flashing sucks, but do it in Windows and it will be a lot less flakier than with other OSes. If you need a solid guide on doing so, search for "diabeticgonewild" on YouTube and there you will find the videos.
Matthew Williams
@mwilliams
Oct 31 2016 19:15
I almost bought the Arduino board just because that was the cheapest route i could get a Edison and breakout board via Amazon Prime. Decided to skip the breakout board and wait for the explorer board (though just gave in and bought Sparkfun's base board)
John Kelleher
@jkelleher
Oct 31 2016 19:16
@danamlewis thanks - one thing, once I have CC1111 flashed, where do I change in the setup (an .ini file?) to reflect the new device (CC1111)? @mwilliams ha, saw you 'cave' earlier and order the base board - hard not to keep pushing ahead...
Dana Lewis
@danamlewis
Oct 31 2016 19:17
Just re-run the setup script and do a fresh setup from scratch
Matthew Williams
@mwilliams
Oct 31 2016 19:17
yeah... I know as soon as that explorer board lands I'm going to want it running ASAP, so I may as well get my edison flashed, openaps setup and my loop in place so all that's hopefully left is telling it how to talk with the onboard radio.
John Kelleher
@jkelleher
Oct 31 2016 19:18
thanks guys - off I go to flash ... following video: https://www.youtube.com/watch?v=R8_n-HxCDuw
diabeticgonewild
@diabeticgonewild
Oct 31 2016 19:19
The "other" flashing video is here: https://youtu.be/L57RC8POJzM
John Kelleher
@jkelleher
Oct 31 2016 19:22
@diabeticgonewild gotcha - watching now - on Mac so hoping that a Windows VM will do the job...
diabeticgonewild
@diabeticgonewild
Oct 31 2016 19:23
I hope so. I think it should...IME at work.
If you installed the USB driver, I think on VMWare Fusion.
Eric
@ecc1
Oct 31 2016 19:25
@mwilliams I think the only issue with using Carelink on Edison is getting the Edison's USB OTG port powered correctly; simple LiPo battery won't cut it; you need at least a boost to 5V, and maybe >= 7V depending on how you interpret Intel's documentation ...
All moot considering how much better the radio modules like CC1110 and RFM69 are.
Matthew Williams
@mwilliams
Oct 31 2016 19:26
yeah
my RPiZero setup right now with the carelink is very spotty
Dana Lewis
@danamlewis
Oct 31 2016 19:28
but if you have an alternative, start with the alternative rather than carelink. not worth setting up, unless you just want to prove if it is possible or not ;)
John Kelleher
@jkelleher
Oct 31 2016 19:30
So flashing T1 - reckon Raspberry Pi or Windows (via Parallels on Mac)?
fiberfan
@fiberfan
Oct 31 2016 19:33
@mwilliams I have a lot less problems with a RPI 3 since I changed the cron jobs to run every other minute. I am looking forward to switching to the explorer/edison combination.
Matthew Williams
@mwilliams
Oct 31 2016 19:40
@fiberfan yeah, I went with the Zero to get it portable, but I've been running it on my RPi2. I have a RPi3 also setup to loop that I think I'm just going to put on my nightstand (the RPi2 is at my home office desk, where I work, doing other things in addition to looping). I have a little USB vertical desk mount, so I can just quickly move my carelink between the two. And give up on trying to go mobile with the RPiZero and wait until I have the explorer board.
and the desk mount helps keep it beamed in the direction of my pump
fiberfan
@fiberfan
Oct 31 2016 19:47
@mwilliams The RPi3 fits in a small bag I bought at a craft store. Carrying it around with me isn't ideal but it works to keep me looping 7x24 for now.
David
@davidkeddydb
Oct 31 2016 19:58
@danamlewis @scottleibrand Are the flashing instructions for the radio stick on board the explorer board already up on openaps.org?
Dana Lewis
@danamlewis
Oct 31 2016 19:58
you don’t have to flash what’s on the explorer board
not with a cc debugger
David
@davidkeddydb
Oct 31 2016 19:59
Is there code that has to be written to/for the radio?
or just good to go out of the box as far as that is concerned?
and then move on
David
@davidkeddydb
Oct 31 2016 19:59
Fantastic.
Scott Leibrand
@scottleibrand
Oct 31 2016 20:51
you might also need to run ccprog. I don't think that is in oref0-setup yet, but it'll be really easy to add.
David
@david-t1
Oct 31 2016 21:00
Hi all, anyone know if the explorer can be run directly off wall power with no battery and is it safe to use standard USB wall plug---USB to microUSB?
Dana Lewis
@danamlewis
Oct 31 2016 21:01
haven’t tried it yet but should be fine
David
@david-t1
Oct 31 2016 21:02
use the OTG port or the other one?
Scott Leibrand
@scottleibrand
Oct 31 2016 21:02
doesn't matter
David
@david-t1
Oct 31 2016 21:02
cool, that is easy enough
David Young
@wgs4
Oct 31 2016 21:21
The explorer v1 that is currently out needs to have a battery connected in order to run off wall power, unless I am rememering incorrectly what Morgan told me last week.
Scott Leibrand
@scottleibrand
Oct 31 2016 21:41
yeah, that is fixed in the design you're building though
unless I'm misremembering
albertotrg
@albertotrg
Oct 31 2016 23:26
Does anybody know if you can change the language of a 722 pump? I found one...but in french...And BTW are all the 722 loopable? According to the wiki it seems you don't even need to check the firmware
katie disimone
@Kdisimone
Oct 31 2016 23:27
You must be looking at the wrong wiki? where do you see that?
nevermind…i see where you must be looking
Dana Lewis
@danamlewis
Oct 31 2016 23:28
@Kdisimone all x22s we’ve heard of are loopable, have you found otherwise?
katie disimone
@Kdisimone
Oct 31 2016 23:29
that’s actually the “readme” file…the wiki is where the guide is and the 722 in the guide is listed as needing a 2.4A firmware.
We should make those consistent.
Dana Lewis
@danamlewis
Oct 31 2016 23:29
(we’re in ITB here :))
katie disimone
@Kdisimone
Oct 31 2016 23:29
oh snap
lol
hahaha
Dana Lewis
@danamlewis
Oct 31 2016 23:29
:D but the Loop guide points to OpenAPS docs sometimes, so consistency/clarity would be good either way
katie disimone
@Kdisimone
Oct 31 2016 23:30
@albertotrg it was my bad…you’re fine. sorry for the confusion.
albertotrg
@albertotrg
Oct 31 2016 23:30
Here in the picture it seems you don't need to check the firmware for a 722
Dana Lewis
@danamlewis
Oct 31 2016 23:30
Yep. We have not heard of any x22s that were not-loopable, so an x22 should be fine. and you should be able to change language, but I can’t guarantee it
(I can’t guarantee anything, in general, in case that needs to be said, too :))
albertotrg
@albertotrg
Oct 31 2016 23:32
ok thanks @danamlewis . I am mainly worried about being loopable I guess French for a couple of settings should be ok