These are chat archives for nightscout/intend-to-bolus

25th
Jan 2017
JaysonEwer
@JaysonEwer
Jan 25 2017 01:13 UTC
Does anyone know how to unstick an openaps pill in NS? 🙂. I've restarted everything, including my Heroku dynos ? I'm still getting an "unknown" for my openaps pill box.
Dana Lewis
@danamlewis
Jan 25 2017 01:13 UTC
looping successfully?
rebooted the rig I assume when you say “restarted everything”?
JaysonEwer
@JaysonEwer
Jan 25 2017 01:14 UTC
Yes, but that may be related to me plugging in and going offline.
Yes, rebooted rig(s)
Dana Lewis
@danamlewis
Jan 25 2017 01:14 UTC
ping google successfully from rig?
JaysonEwer
@JaysonEwer
Jan 25 2017 01:16 UTC
Yes
sdneufer
@sdneufer
Jan 25 2017 02:20 UTC

@colinlennon @danalewis @scottleibrand Am I supposed to have dbus already installed to run xdripAPI on the pi?
systemctl status net-bnep-client
● net-bnep-client.service
Loaded: loaded (/etc/systemd/system/net-bnep-client.service; enabled)
Active: failed (Result: exit-code) since Tue 2017-01-24 19:17:08 EST; 1h 53min ago
Process: 608 ExecStart=/home/pi/bin/bt-pan client 68:C4:4D:10:63:67 (code=exited, status=1/FAILURE)
Main PID: 608 (code=exited, status=1/FAILURE)

Jan 24 19:17:08 raspberrypi systemd1: Started net-bnep-client.service.
Jan 24 19:17:08 raspberrypi bt-pan[608]: Traceback (most recent call last):
Jan 24 19:17:08 raspberrypi bt-pan[608]: File "/home/pi/bin/bt-pan", line 6, in <module>
Jan 24 19:17:08 raspberrypi bt-pan[608]: import dbus
Jan 24 19:17:08 raspberrypi bt-pan[608]: ImportError: No module named dbus
Jan 24 19:17:08 raspberrypi systemd1: net-bnep-client.service: main process exited, code=exited, status=1/FAILURE
Jan 24 19:17:08 raspberrypi systemd1: Unit net-bnep-client.service entered failed state.

jaylagorio
@jaylagorio
Jan 25 2017 02:20 UTC
@scottleibrand Is the one he gave you just with the cut or is there something extra? I'm going to make my cut tomorrow and hopefully finally tie all this stuff together to work by the weekend.
ohbrandon
@ohbrandon
Jan 25 2017 03:14 UTC
Got my girlfriends setup Looping and sending temp basals to the pump as it should... but while everything else on the Nightscout page is working fine the OpenAPS/Pump pills arent populated.
What have I missed? (added it to azure config, the pills show, but are empty)
Dana Lewis
@danamlewis
Jan 25 2017 03:30 UTC
@ohbrandon has it been >15 minutes?
check your NS.ini to make sure URL is correct, etc.
No trailing slash
Scott Leibrand
@scottleibrand
Jan 25 2017 03:32 UTC
@jaylagorio I think mine is a slightly different modification intended to have fewer side effects.
jaylagorio
@jaylagorio
Jan 25 2017 03:34 UTC
Maybe I should wait a little longer for some root causing to be done
Dana Lewis
@danamlewis
Jan 25 2017 03:36 UTC
:+1:
Got a box from groupgets batch today, too. #ExplorerBoardsherethereandeverywhere
ohbrandon
@ohbrandon
Jan 25 2017 04:00 UTC
@danamlewis Yeah, its been an hour
Dana Lewis
@danamlewis
Jan 25 2017 04:00 UTC
@ohbrandon ok. how’s the Ns.ini look? URL correct, no trailing slash? API secret correct?
ohbrandon
@ohbrandon
Jan 25 2017 04:00 UTC
yup
Dana Lewis
@danamlewis
Jan 25 2017 04:04 UTC
(you’ll want to delete the post and go change API secret - don’t want to share that online anywhere)
ohbrandon
@ohbrandon
Jan 25 2017 04:05 UTC
will do -- thx
Any thoughts on where to go from here to get the pills working?
Dana Lewis
@danamlewis
Jan 25 2017 04:09 UTC
is the rig online? ping google.com and check?
ohbrandon
@ohbrandon
Jan 25 2017 04:10 UTC
pi@raspberrypi:~/kateaps $ ping google.com
PING google.com (216.58.218.206) 56(84) bytes of data.
64 bytes from dfw06s47-in-f14.1e100.net (216.58.218.206): icmp_seq=1 ttl=54 time=16.7 ms
64 bytes from dfw06s47-in-f14.1e100.net (216.58.218.206): icmp_seq=2 ttl=54 time=31.1 ms
@danamlewis Its not updating the IOB either
Dana Lewis
@danamlewis
Jan 25 2017 04:12 UTC
(@jaysonewer, did your NS ever come back? if so, what did you do?)
@ohbrandon just for kicks, try rebooting your rig if you haven’t, then probably after that if still not working, have to try some manual ns-upload commands to troubleshoot why it’s not getting up to nightscout
oh - and did you schedule cron to run?
ohbrandon
@ohbrandon
Jan 25 2017 04:15 UTC
I selected yes in the setup but how can I validate?
Dana Lewis
@danamlewis
Jan 25 2017 04:15 UTC
you can crontab -l, but you said it was setting temps so you should be fine - was just doublechecking
ohbrandon
@ohbrandon
Jan 25 2017 04:16 UTC
just read that -- opened the file in nano, has data inside
Dana Lewis
@danamlewis
Jan 25 2017 04:17 UTC
:+1:
ohbrandon
@ohbrandon
Jan 25 2017 04:17 UTC
pi@raspberrypi:~/kateaps $ crontab -l
NIGHTSCOUT_HOST=http://katesbs.azurewebsites.net
API_SECRET=XXX
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/games:/usr/games
          • sudo wpa_cli scan
          • killall -g --older-than 15m openaps
          • cd /home/pi/kateaps && oref0-reset-git

Scott Leibrand
@scottleibrand
Jan 25 2017 04:18 UTC
Is your URL http or https?
ohbrandon
@ohbrandon
Jan 25 2017 04:19 UTC
web URL is https
ns.ini has https
Scott Leibrand
@scottleibrand
Jan 25 2017 04:20 UTC
Your crontab doesn't match.
Dana Lewis
@danamlewis
Jan 25 2017 04:20 UTC
add the s to the cron and see if that fixes
Scott Leibrand
@scottleibrand
Jan 25 2017 04:20 UTC
I would delete crontab and re-run oref0-setup with the correct info.
Maybe try URL change first though.
Could be your API secret didn't get updated in both places, too.
ohbrandon
@ohbrandon
Jan 25 2017 04:20 UTC
Not sure how to manually change the URL in the cron job
Dana Lewis
@danamlewis
Jan 25 2017 04:21 UTC
crontab -e
ohbrandon
@ohbrandon
Jan 25 2017 04:22 UTC
Alright thank you!
Updated, presume I need to wait 15min?
Dana Lewis
@danamlewis
Jan 25 2017 04:23 UTC
mostly just need cron to run again, so hopefully not that long
(the 15 min was just a good rule of thumb for any azure settings changes to propogate over to your site)
ohbrandon
@ohbrandon
Jan 25 2017 04:27 UTC
@danamlewis Anything need to be setup in Admin Tools on the NS site?
Dana Lewis
@danamlewis
Jan 25 2017 04:28 UTC
you’ve got the pills showing, so that’s good. but check that you have DEVICESTATUS_ADVANCED as true, etc per http://openaps.readthedocs.io/en/latest/docs/walkthrough/phase-1/nightscout-setup.html#enable-these-plugins
Dana Lewis
@danamlewis
Jan 25 2017 04:31 UTC
:+1:
ok if fixing the https in cron didn’t work , you can try deleting your cron and re-running the setup script.
ohbrandon
@ohbrandon
Jan 25 2017 04:33 UTC
would teh order of the status items (careportal, etc) matter?
Dana Lewis
@danamlewis
Jan 25 2017 04:33 UTC
I don’t think so
ohbrandon
@ohbrandon
Jan 25 2017 04:38 UTC
alright reran setup, I'll wait it out and see
Dana Lewis
@danamlewis
Jan 25 2017 04:39 UTC
ok. and if that doesn’t work…we’ll bat signal the NS pros
ohbrandon
@ohbrandon
Jan 25 2017 04:52 UTC
@danamlewis May need that bat signal . :\
Dana Lewis
@danamlewis
Jan 25 2017 04:54 UTC
k. @audiefile when you get a chance, can you provide some suggestions to @ohbrandon ? looping successfully, but no info in openaps pills.
(or anyone else who has ideas on what to try next - url correct, api secret correct, looping fine, etc.)
tynbendad
@tynbendad
Jan 25 2017 05:49 UTC
hi... wondering, in autotune is there a way to disable the safety caps for a run?
Dana Lewis
@danamlewis
Jan 25 2017 05:53 UTC
Yes - however we don't recommend acting upon any of the uncapped recommendations
*uncapped calculations
tynbendad
@tynbendad
Jan 25 2017 05:59 UTC
no, but i want to see just how much it could be
off by
and also to compare a single day run to a weekly run without interference from caps
Dana Lewis
@danamlewis
Jan 25 2017 06:03 UTC
k. you can change the autosens max then, from 1.2 to something higher..
keeping in mind - this is an unvalidated tool, so the caps are there for a really good reason :)
tynbendad
@tynbendad
Jan 25 2017 06:05 UTC
yes, i don't make changes without lots of deliberation and multiple ways of looking at it, and then i cross fingers and watch carefully... way too careful :)
thanks ,will give it a whirl
Dana Lewis
@danamlewis
Jan 25 2017 06:07 UTC
:+1:
tynbendad
@tynbendad
Jan 25 2017 06:23 UTC
ok, not much different in fact, i'm loving autotune :)
Dana Lewis
@danamlewis
Jan 25 2017 06:25 UTC
:smile:
tynbendad
@tynbendad
Jan 25 2017 06:25 UTC
one thing i notice is the basal rate seems to only be adjusted at non-meal times (with consistent mealtimes through the timespan)... that makes sense since autotune can't see what the basal should have been then. but makes me think i can use a constant basal rate instead of changing it so much for these times.
Dana Lewis
@danamlewis
Jan 25 2017 06:28 UTC
You may have been using basal to compensate at meal times before, then?
tynbendad
@tynbendad
Jan 25 2017 06:28 UTC
loop does because he won't prebolus :)
Dana Lewis
@danamlewis
Jan 25 2017 06:29 UTC
I meant underlying basals - did you have them higher prior/during mealtimes?
tynbendad
@tynbendad
Jan 25 2017 06:30 UTC
no, we use constant .5/u currently
.5u/hr
Dana Lewis
@danamlewis
Jan 25 2017 06:31 UTC
K
Matthias
@ceben80
Jan 25 2017 06:41 UTC
@danamlewis thanks again for splitting autotune related stuff into a separate channel :+1:
tynbendad
@tynbendad
Jan 25 2017 06:42 UTC
oh, is there a new gitter channel?
tynbendad
@tynbendad
Jan 25 2017 06:42 UTC
how do you track multiple gitter channels? i really don't find gitter all that usable :)
Dana Lewis
@danamlewis
Jan 25 2017 06:44 UTC
They show up in my left hand column. Like all things, it has pros (publicly transparent) and cons (hard to get images into mobile app, etc.)
tynbendad
@tynbendad
Jan 25 2017 06:47 UTC
going to show endo autotune results, i think its remarkable, they'll probably just ignore it :)
samihusseingit
@samihusseingit
Jan 25 2017 06:49 UTC
does autotune actually work..like has anyone tried the results on their pump to see if it made any impact on their graph?
:) just curious
Dana Lewis
@danamlewis
Jan 25 2017 06:49 UTC
:smile: that's the point of it, hopefully they'll like it! You may also want to bring in the "how I t works" either from my blog post or the docs
tynbendad
@tynbendad
Jan 25 2017 06:49 UTC
good suggestion, will do that
Dana Lewis
@danamlewis
Jan 25 2017 06:49 UTC
@samihusseingit yes, for many it has.
tynbendad
@tynbendad
Jan 25 2017 06:49 UTC
i haven't changed any settings, but its very close to what i was thinking was needed, and a bit enlightening also
Dana Lewis
@danamlewis
Jan 25 2017 06:49 UTC
@tynbendad and if they want to partner with us on improving it, yay! ;)
samihusseingit
@samihusseingit
Jan 25 2017 06:56 UTC
@tynbendad when our son was first diagnosed, we asked daycare if they had any experience with diabeties..and they said "oh we had a little girl with a watch on her hand that showed her bg"....of course we didn't know anything..so we simply asked our doctor...
he said, oh I don't know anything about that...and changed the subject.
then I found nightscout and we showed him..and he actually knew everything...he simply didn't want to tell us!!
endos are like that..
C-Ville
@C-Ville
Jan 25 2017 07:28 UTC
@samihusseingit i hope you found another endo by now
samihusseingit
@samihusseingit
Jan 25 2017 07:29 UTC
@C-Ville He is the same endo.. He is a really nice doctor...and I understand why he doesn't want to support technology. Our son is only 4 years old...and he doesn't want to be liable for any (Off label systems going wrong)
I don't think we will find any endo that will support opensource technology for treating diabeties for children here in Sweden :)
C-Ville
@C-Ville
Jan 25 2017 07:40 UTC
@samihusseingit but you found the people here for support :-)
Tim Street
@tim2000s
Jan 25 2017 07:43 UTC
@alternateal I've been running with the latest oref0-online and my iPhone, and it works pretty well. I have found the need to stop and restart the iPhone hotspot before the Edison will reconnect though.
Tim Street
@tim2000s
Jan 25 2017 08:00 UTC
Does anyone use ssmtp to email alerts from the Edison? I figure that emailing battery level could be useful!
Matthias
@ceben80
Jan 25 2017 08:22 UTC
@tim2000s I think @libxmike was playing aroung with smtp stuff sending emails from a rig :wink:
Tim Street
@tim2000s
Jan 25 2017 08:25 UTC
It's really easy. Set it up in about 15 mins this morning.
Matthias
@ceben80
Jan 25 2017 08:51 UTC
That's right :wink:
jlaes
@jlaes
Jan 25 2017 10:43 UTC
Has anybody had the issue with running Autotune that the IC in the successful run is old and not the same number as in all three profiles?
Chris Oattes
@cjo20
Jan 25 2017 10:50 UTC
tim2000s: You know that battery level is uploaded to nightscout, right?
Tim Street
@tim2000s
Jan 25 2017 11:23 UTC
Yes, but I can't always see Nightscout, and pushover is temperamental!
Chris Oattes
@cjo20
Jan 25 2017 11:23 UTC
hmm, where can you get email but not see nightscout?
Tim Street
@tim2000s
Jan 25 2017 12:12 UTC
When you're somewhere where you can check a watch notification but not necessarily get your phone out...
Tim Street
@tim2000s
Jan 25 2017 12:31 UTC
Well that was fun. Just ran four days of auto tune data on a live edison rig. It consumed CPU to such an extent that openaps was excluded. Might be worth process priority setting if you're going to do that !
Colin Lennon
@colinlennon
Jan 25 2017 12:52 UTC
@danamlewis Thanks, yip, I'll go ahead and do that :+1:
Sandra Keßler
@SandraK82
Jan 25 2017 13:01 UTC
hm something seems wrong:
Starting pump-loop at Wed 25 Jan 13:42:24 CET 2017:
Radio ok, Listening: .No pump comms detected from other rigs
Old pumphistory: 
Error, retrying
Listening: .No pump comms detected from other rigs
mmtune: Starting pump-loop at Wed 25 Jan 13:44:35 CET 2017:
Radio ok, Listening: .No pump comms detected from other rigs
Old pumphistory: 
Error, retrying
Listening: .No pump comms detected from other rigs
mmtune: Starting pump-loop at Wed 25 Jan 13:46:47 CET 2017:
Radio ok, Listening: .No pump comms detected from other rigs
Old pumphistory: 
Error, retrying
Starting pump-loop at Wed 25 Jan 13:47:41 CET 2017:
Radio ok, Listening: .No pump comms detected from other rigs
Old pumphistory: Starting pump-loop at Wed 25 Jan 13:50:18 CET 2017:
Radio ok, Listening: .No pump comms detected from other rigs
Old pumphistory: 
Error, retrying
Listening: .No pump comms detected from other rigs
mmtune: Starting pump-loop at Wed 25 Jan 13:52:29 CET 2017:
Radio ok, Listening: .No pump comms detected from other rigs
Old pumphistory: 
Error, retrying
Starting pump-loop at Wed 25 Jan 13:53:23 CET 2017:
Radio ok, Listening: .No pump comms detected from other rigs
Old pumphistory: 
Error, retrying
Starting pump-loop at Wed 25 Jan 13:54:17 CET 2017:
Radio ok, Listening: .No pump comms detected from other rigs
Old pumphistory: 
Error, retrying
Listening: .No pump comms detected from other rigs
mmtune: Starting pump-loop at Wed 25 Jan 13:56:28 CET 2017:
Radio ok, Listening: .No pump comms detected from other rigs
Old pumphistory: 
Error, retrying
Listening: .No pump comms detected from other rigs
mmtune: Starting pump-loop at Wed 25 Jan 13:58:40 CET 2017:
Radio ok, Listening: .No pump comms detected from other rigs
Old pumphistory: 
Error, retrying
Chris Oattes
@cjo20
Jan 25 2017 13:01 UTC
Tried rebooting the rig?
Sandra Keßler
@SandraK82
Jan 25 2017 13:01 UTC
ah false alarm, now its back up again :)
Colin Lennon
@colinlennon
Jan 25 2017 13:05 UTC
@sdneufer It looks like it's BT tethering that you're trying to set up, not xDripAPS, is that correct? I haven't seen that error before, it sounds like your Python-related packages are possibly not up-to-date, or one is missing. You could try running dpkg -s python-dbus to check if you have the python-dbus package installed or not
jburke41
@jburke41
Jan 25 2017 14:46 UTC
Does anyone have good recommendations for portable batteries for the Raspberry Pi 3? The 3 requires higher amp than the 2---needs to be greater than 2.1 amp output. I have had success with the Tecknet 3.4 amp output, but I often have problems with overheating especially when I use it in a fanny pack. Any success with alterantive battery packs?
Scott Leibrand
@scottleibrand
Jan 25 2017 17:26 UTC
@jlaes we made a new openaps/autotune Gitter channel if you want to jump over there.
@jburke41 have you ordered an Explorer board and Edison yet? That is the best fix for battery size issues. :smile:
C-Ville
@C-Ville
Jan 25 2017 17:30 UTC
@SandraK82 happens to me too once in a while mostly a new mmtune will fix it sometimes a new battery. If you found your reason I´d be happy to know
ohbrandon
@ohbrandon
Jan 25 2017 17:39 UTC
Anyone around who can help me trouble shoot get OpenAPS pills on NS? Mine are null.. my values are correct, loop is running, ns.ini checks out, Azure is setup correctly.. cron is running.
Scott Leibrand
@scottleibrand
Jan 25 2017 17:41 UTC
Have you checked your devicestatus.json API endpoint to see what is being uploaded? Have you run the upload aliases (and their component reports) manually?
jlaes
@jlaes
Jan 25 2017 17:46 UTC
@scottleibrand thanks, I will later
JaysonEwer
@JaysonEwer
Jan 25 2017 17:46 UTC
My openaps pill has been reporting "unknown" for almost two days, not sure what happened.
@scottleibrand my devicestatus endpoint appears to be good
What else would be preventing the openaps pill from being populated with data?
jburke41
@jburke41
Jan 25 2017 17:51 UTC
@JaysonEwer Is it possible that your pump is in percentage temp basal, not absolute temp basal?
JaysonEwer
@JaysonEwer
Jan 25 2017 17:52 UTC
No, I'm actually looping but the openaps pill is not populating for some reason
jburke41
@jburke41
Jan 25 2017 17:53 UTC
@scottleibrand I want to start workign on that soon!
JaysonEwer
@JaysonEwer
Jan 25 2017 17:57 UTC
Actually I looked a little closer on my devicestatus endpoint and it's not good. Could there be a corrupted record of some sort causing this problem? Or am I just not uploading properly?
ohbrandon
@ohbrandon
Jan 25 2017 18:03 UTC
What would cause the devicestatus.json to get wonky?
(provided the loop is running)
Scott Leibrand
@scottleibrand
Jan 25 2017 18:11 UTC
@JaysonEwer not good how?
JaysonEwer
@JaysonEwer
Jan 25 2017 18:12 UTC
Old data from the 23 and 24
ohbrandon
@ohbrandon
Jan 25 2017 18:13 UTC
Whats the process for reseting that file?
JaysonEwer
@JaysonEwer
Jan 25 2017 18:13 UTC
I recently started plugging in to loop offline periodically is there some sort of switch that happens that may be fouled up?
C-Ville
@C-Ville
Jan 25 2017 18:13 UTC
@scottleibrand I do have a WW pump, therefore I activate WW
Scott Leibrand
@scottleibrand
Jan 25 2017 18:13 UTC
It's not a file, it's just a view into that part of your mongo db. If it's just old, that's just another symptom.
JaysonEwer
@JaysonEwer
Jan 25 2017 18:14 UTC
Yeah, ok
Scott Leibrand
@scottleibrand
Jan 25 2017 18:14 UTC
@C-Ville you only need WW stuff with mmeowlink.
Might need to fix oref0-setup to not prompt for that if you're on Carelink.
Care to take a shot at that and PR?
C-Ville
@C-Ville
Jan 25 2017 18:14 UTC
@scottleibrand is mmeowlink not needed for an ERF?
Scott Leibrand
@scottleibrand
Jan 25 2017 18:15 UTC
Yes, it is.
JaysonEwer
@JaysonEwer
Jan 25 2017 18:15 UTC
The openaps pill has a yellow triangle on it that seems to indicate there may be a message or warning of some sort, but I can't see anything there.
Scott Leibrand
@scottleibrand
Jan 25 2017 18:15 UTC
So the problem is just the "TI" language is confusing?
Your ERF isn't on spidev5.1 though.
@JaysonEwer that is displayed for too-old data among other things.
You need to go run the upload reports manually.
C-Ville
@C-Ville
Jan 25 2017 18:18 UTC
@scottleibrand I know, my ERF is on UART but TI would also be either on UART or USB OTG, so I got confused. I thought the only chip using spidev would be the new explorer board
the discussion with @scottleibrand is around that error message
mmtune: "868.390", 5, -42 Starting pump-loop at Wed Jan 25 19:11:20 CET 2017:
Radio ok, Listening: .No pump comms detected from other rigs
Old pumphistory: 
Error, retrying
Listening: .No pump comms detected from other rigs
subg-ww-radio-parameters:running /usr/local/bin/oref0-subg-ww-radio-parameters for max 30 seconds
Your TI-stick is located at /dev/spidev5.1
+ cd /home/edison/src/subg_rfspy/tools
/usr/local/bin/oref0-subg-ww-radio-parameters: line 22: cd: /home/edison/src/subg_rfspy/tools: No such file or directory
/usr/local/bin/oref0-subg-ww-radio-parameters-timeout: 8: kill: No such process
Scott Leibrand
@scottleibrand
Jan 25 2017 18:21 UTC
What port did you provide during setup?
C-Ville
@C-Ville
Jan 25 2017 18:22 UTC
/dev/ttymdf1
it is an old Intel breakout board
port = /dev/ttyMFD1
radio_type = subg_rfspy
radio_locale=WW
JaysonEwer
@JaysonEwer
Jan 25 2017 18:26 UTC
@scottleibrand thank you, working on that now
Scott Leibrand
@scottleibrand
Jan 25 2017 19:15 UTC
@C-Ville I wasn't involved in that WW stuff much, but I think it should match. Might be a bug
C-Ville
@C-Ville
Jan 25 2017 19:16 UTC
@scottleibrand this only pops up if I cant refresh for a while
other than that the loop works
Scott Leibrand
@scottleibrand
Jan 25 2017 19:21 UTC
k. probably still worth investigating why it says "Your TI-stick is located at /dev/spidev5.1", as that is obviously wrong
C-Ville
@C-Ville
Jan 25 2017 19:23 UTC
I wonder if I should have
/home/edison/src/subg_rfspy/tools
jmcrawford
@jmcrawford
Jan 25 2017 20:27 UTC
the git cleanup tasks haven't been working for a bit. Trying to run things manually, I'm getting this:
git update-ref -d refs/original/refs/heads/master && git reflog expire --expire=now --all && git gc --prune=now --aggressive
Counting objects: 27309, done.
Delta compression using up to 2 threads.
Compressing objects: 100% (22267/22267), done.
fatal: unable to read bc92c8e7de7b4609bfcbb66da16bb28d45fda40e
error: failed to run repack
Tim Street
@tim2000s
Jan 25 2017 20:42 UTC
Right then, following the issues with 'losing' hci0, I'm refreshing the edison. There doesn't seem to be another way.
*reflashing
jburke41
@jburke41
Jan 25 2017 21:01 UTC
Does anyone ever get this repeated message, but the pump will not go into to a temp basal? alt
Tim Street
@tim2000s
Jan 25 2017 21:02 UTC
Edison nightmares. I don't seem to be able to reach my wifi network...!
Scott Leibrand
@scottleibrand
Jan 25 2017 21:03 UTC
@jburke41 after 5m you should see something different. scroll back?
that message just means "nothing to do yet, until we get a new BG reading or it's been 5m since last pump query"
jburke41
@jburke41
Jan 25 2017 21:05 UTC
It says IndexError: bytearray index out of range
Scott Leibrand
@scottleibrand
Jan 25 2017 21:05 UTC
I'd need more context than that
jburke41
@jburke41
Jan 25 2017 21:06 UTC
Before that it said Attempting to use a port that is not open
Tim Street
@tim2000s
Jan 25 2017 21:10 UTC
Right then. Sexy clean Edit to rebuild openAPS and oref0 on to!
alternateal
@alternateal
Jan 25 2017 21:21 UTC
@tim2000s just haven't had time to play yet to sort the iPhone hotspot out - hours in day problem. Will get fixed as my Explorers should be delivered tomorrow - just paid the customs charges
sdneufer
@sdneufer
Jan 25 2017 21:27 UTC
@colinlennon In hindsight yes, it was the bluetooth tethering that was an issue. I have it working at home with the wifi shut off, so it should work when I go out. I have the wixel rig, Android (data only) using xdrip+ and running openAPS on pi3. I wanted to be able to get the data to the pi without going to the cloud and back. I figured I would use a bluetooth connection, as suggested in the xDripAPS instructions, however the pi wanted the dbus package which was not on my pi. So... somewhere it might be good to note that it should be installed. I did not see it in the doc under "Configure Bluetooth Low Energy tethering". I got it installed and then paired the Android with the pi, and spent a little longer staring at it because (duh) I did not turn on the tethering which was (obviously) in another menu. So, another thing to note in the documentation. So, as you noted, this is more a bluetooth tethering issue, so in the openaps configure bluetooth documentation perhaps? Is this where somebody says I should checkout that doc and add this? Or did I just miss it during the original pi or openaps install?
woodtrevor
@woodtrevor
Jan 25 2017 21:37 UTC
@jburke41 Are you getting new cgm data? Check /var/log/openaps/cgm-loop.log.