These are chat archives for nightscout/intend-to-bolus

20th
Mar 2017
francesc0-cgm
@francesc0-cgm
Mar 20 2017 00:06
@peterfulvi i write you a pm about http-widget
@ceben80 i add the line in crontab and i edit the second one. I'm stucked on openaps.ini...i presume that pasting in the .ini the code in your readme is not correct...don't know how to create an alias...could you help me please?
RedCyclist1
@RedCyclist1
Mar 20 2017 00:15
@Kdisimone @danalewis Here is a screen shot of my BS from last night... when I don't have the rig on, I wake up w BS around 90 - 120, when I do have it on I wake up between 150 or higher.. I don't know why?
image.png
francesc0-cgm
@francesc0-cgm
Mar 20 2017 00:18
@ceben80 solved...found [alias] and pasted there...however i have network problem instead the info on the widget
Just kidding...it works!
Dana Lewis
@danamlewis
Mar 20 2017 00:19
@RedCyclist1 what do your logs say? Do you have autosens turned on?
francesc0-cgm
@francesc0-cgm
Mar 20 2017 00:21
@ceben80 just seen on your twitter you have also added xdrip and last bg time of xdrip...how can i replicate it?
RedCyclist1
@RedCyclist1
Mar 20 2017 00:28
@danalewis We updated to the newest master yesterday and everything looked great, even board seem to not get as hot.. Not sure why.. I turned on all the advanced features., will check the logs in a bit, in the middle of attemp[ting to BT again, with the new directions.
Dana Lewis
@danamlewis
Mar 20 2017 00:30
K. We can't answer the "why is it doing (thing)?" without log/pill info, so share that later if you want input. :+1:
RedCyclist1
@RedCyclist1
Mar 20 2017 00:31
@danamlewis Hubby and are both working on rig separtately. I can't putty in while he is updating bt right?
Dana Lewis
@danamlewis
Mar 20 2017 00:32
You can log in and have as many ssh sessions as you want
RedCyclist1
@RedCyclist1
Mar 20 2017 00:32
@danamlewis ahh ok, I will look
@danamlewis one sec getting error in PuTTY...
Dana Lewis
@danamlewis
Mar 20 2017 00:37
No rush for me :smile:
RedCyclist1
@RedCyclist1
Mar 20 2017 00:54

@danamlewis @Kdisimone havent done papertrail, but here are my logs: Profile less than 60m old
temp_basal.json less than 5m old
Pumphistory less than 5m old
Settings refreshed
Pumphistory-24 less than 20m old
Completed pump-loop at Sun Mar 19 17:41:03 MST 2017

Starting pump-loop at Sun Mar 19 17:42:07 MST 2017:
Radio ok, Listening: .No pump comms detected from other rigs
Profile less than 60m old
temp_basal.json less than 5m old
Pumphistory less than 5m old
Settings less than 10m old
pumphistory-24h refreshError, retrying
Listening: .No pump comms detected from other rigs
mmtune: pump://JSON/mmtune/monitor/mmtune.json
reporting monitor/mmtune.json
"916.684", 5, -64 Starting pump-loop at Sun Mar 19 17:44:05 MST 2017:
Radio ok, Listening: .No pump comms detected from other rigs
Profile less than 60m old
glucose.json newer than temp_basal.json
Temp refreshed
{"carbs":21,"boluses":3.7,"mealCOB":2}
{"ratio":1.1}
{"iob":2.527,"activity":0.0324,"bolussnooze":0.679,"basaliob":0.048,"netbasalinsulin":0.05,"hightempinsulin":0.05,"time":"2017-03-20T00:44:27.000Z"}
{"delta":0,"glucose":263,"short_avgdelta":0,"long_avgdelta":7.6}
{"duration":11,"rate":0.75,"temp":"absolute"}
Adjusting basal from 0.691 to 0.75
Adjusting target_bg from 115 to 110
Adjusting sens from 88.571 to 80.5
Carb Impact: 13 mg/dL per 5m; CI Duration: 0.1 hours
Accel. Carb Impact: 10 mg/dL per 5m; ACI Duration: 0.2 hours
determine-basal://text/shell/enact/suggested.json
reporting enact/suggested.json
{"temp":"absolute","bg":263,"tick":"+0","eventualBG":138,"snoozeBG":220,"predBGs":{"IOB":[263,262,259,255,250,243,234,226,217,208,199,189,179,170,162,154,147,141,136,132,128,125,123,121,120,119,118],"aCOB":[263,256,243,229,215,200,186,172,159,147,135,124,114,105,97,89,82,76,71,67,63,60,58,56,55,54,53],"COB":[263,255,242,228,214,199,185,171,158,145,134,123,113,104,96,88,81,75,70,66,62,59,57,55,54,53,52]},"COB":2,"IOB":2.527,"reason":"COB: 2, Dev: 78, BGI: -13.04, ISF: 81, Target: 110; Eventual BG 138 >= 115, basaliob 0.05 > max_iob 0; setting current basal of 0.75 as temp","duration":30,"rate":0.75}
pump://JSON/set_temp_basal/enact/enacted.json
reporting enact/enacted.json
{"bg":263,"temp":"absolute","snoozeBG":220,"recieved":true,"predBGs":{"COB":[263,255,242,228,214,199,185,171,158,145,134,123,113,104,96,88,81,75,70,66,62,59,57,55,54,53,52],"aCOB":[263,256,243,229,215,200,186,172,159,147,135,124,114,105,97,89,82,76,71,67,63,60,58,56,55,54,53],"IOB":[263,262,259,255,250,243,234,226,217,208,199,189,179,170,162,154,147,141,136,132,128,125,123,121,120,119,118]},"rate":0.75,"reason":"COB: 2, Dev: 78, BGI: -13.04, ISF: 81, Target: 110; Eventual BG 138 >= 115, basaliob 0.05 > max_iob 0; setting current basal of 0.75 as temp","COB":2,"eventualBG":138,"timestamp":"2017-03-19T17:44:57.408438","duration":30,"tick":"+0","IOB":2.527}
glucose.json newer than pumphistory: Ref
Error, retrying
Starting pump-loop at Sun Mar 19 17:45:13 MST 2017:
Radio ok, Listening: .No pump comms detected from other rigs
Profile less than 60m old
temp_basal.json less than 5m old
glucose.json newer than pumphistory: Refreshed pumphistory
{"carbs":21,"boluses":4.3,"mealCOB":2}
{"ratio":1.1}
{"iob":3.038,"activity":0.0325,"bolussnooze":1.231,"basaliob":0,"netbasalinsulin":0,"hightempinsulin":0,"time":"2017-03-20T00:45:40.000Z"}
{"delta":0,"glucose":263,"short_avgdelta":0,"long_avgdelta":7.6}
{"duration":30,"rate":0.75,"temp":"absolute"}
Adjusting basal from 0.691 to 0.75
Adjusting target_bg from 115 to 110
Adjusting sens from 88.571 to 80.5
Carb Impact: 13.1 mg/dL per 5m; CI Duration: 0.1 hours
Accel. Carb Impact: 10 mg/dL per 5m; ACI Duration: 0.2 hours
determine-basal://text/shell/enact/suggested.json
reporting enact/suggested.json
{"temp":"absolute","bg":263,"tick":"+0","eventualBG":96,"snoozeBG":245,"predBGs":{"IOB":[263,262,259,255,249,241,232,223,214,203,193,182,170,159,149,139,130,122,115,108,103,98,94,91,88,86,84,83,82,81,80,79,79,78,78,78,77],"aCOB":[263,255,243,229,214,199,183,169,155,141,129,116,105,94,84,74,65,57,49,43,39],"COB":[263,255,242,228,213,197,182,168,154,140,127,115,104,93,82,7

@Kdisimone Thanks Kate, will set it up.. as I am not good at reading what I do have
@danamlewis @Kdisimone I am not sure how to get the logs from last night to show
katie disimone
@Kdisimone
Mar 20 2017 00:56
That's great for current info. But wasn't you question about things that are happening at night? While you slept? Get papertrail going so that you can look back in the morning at what happened during the night.
Dana Lewis
@danamlewis
Mar 20 2017 00:56
Do you mean for your max iob to still be 0?
I have a feeling it's low temping you but then can't high temp to compensate for any rises in the am.
katie disimone
@Kdisimone
Mar 20 2017 00:57
And that ^^
Dana Lewis
@danamlewis
Mar 20 2017 00:57
+1 for paper trail and looking at logs in the am from when you're curious about
RedCyclist1
@RedCyclist1
Mar 20 2017 00:57
no, I thought that was updated through pump??
katie disimone
@Kdisimone
Mar 20 2017 00:57
When you rebuilt did you remember your preferences.json
Another read through the docs might be helpful
RedCyclist1
@RedCyclist1
Mar 20 2017 00:58
@danamlewis @Kdisimone OK, I haven't changed anything yet, I was changing targets and maxiob in pump, I thought that was where the input was coming from. I will reread the prefences
katie disimone
@Kdisimone
Mar 20 2017 00:59
You didn't change max_iob in the pump. That is not possible. You were changing a max basal rate. That is a different thing entirely. Back to the phase 3 docs for more on that
RedCyclist1
@RedCyclist1
Mar 20 2017 01:00
@Kdisimone got it... thks ladies
Paul Dickens
@thebookins
Mar 20 2017 01:10
Hi everyone, having some trouble here getting the rig to work without freezing. Today papertrail logs have stopped and before it stopped I was getting a bunch of (CRON) error (create tmpfile) errors. This despite doing a hard restart just a few hours ago.
Any ideas?
Dana Lewis
@danamlewis
Mar 20 2017 01:14
@thebookins try a reboot?
Hard restart might've corrupted git and filled up tmp..
There's also a fix in dev for a better fix on tmp stuff but possibly depends on what's causing as to what the fix needed is
Paul Dickens
@thebookins
Mar 20 2017 01:18
Thanks @danamlewis I'll also look into the new stuff in dev. What's the likelihood we've got a dodgy edison? Seems to be happening more frequently than others report...
garykidd
@garykidd
Mar 20 2017 01:21
any thoughts om this.
reporting enact/enacted.json
{"bg":148,"temp":"absolute","snoozeBG":67,"recieved":true,"predBGs":{"COB":[148,144,139,133,127,120,112,104,95,87,80,73,66,60,55,50,45,41,39,39,39,39,39,39,39,39,39,39,39,39,39,39,39,41,45,49,53,57,61,65,69,73,77,80,84,87,90,94,97,100,103,106,109,112,114],"aCOB":[148,148,147,145,143,139,135,130,125,120,115,111,108,104,102,99,97,95,94,93,92,92,92,93,94,95,97,98,101,103,106,109,113,116,120,125,129,133,137,141,145,148,151,154,157,160,162,164,166,168,170,171,172,173,174],"IOB":[148,144,138,131,123,114,103,92,80,68,56,44,39]},"rate":1.3,"reason":"COB: 59, Dev: 35, BGI: -9.81, ISF: 38, Target: 91; Eventual BG 114 > 89 but Min. Delta -4.00 < Exp. Delta -2.4; setting current basal of 1.3 as temp","COB":59,"eventualBG":114,"timestamp":"2017-03-19T21:16:56.942335","duration":30,"tick":-4,"IOB":7.19}
Settings less than 10m old
Pumphistory-24 less than 20m old
Completed pump-loop at Sun Mar 19 21:17:02 EDT 2017
Screen Shot 2017-03-19 at 9.21.31 PM.png
basal pill doesnt seem to be updating???
garykidd
@garykidd
Mar 20 2017 01:35
Screen Shot 2017-03-19 at 9.34.19 PM.png
falling into a repeating pattern here.......looks my rig worked a few cycles out of the gate but then conked out here....when I ssh'd back in and tail the loop log....it gets stuck at what's shown above.....love some help
any help alll weekend = issues.
garykidd
@garykidd
Mar 20 2017 01:40
assuming theres no issue with this part...
Warning: the ECDSA host key for 'purplebird.local' differs from the key for the IP address '192.168.2.15'
Offending key for IP in /Users/g/.ssh/known_hosts:3
Matching host key in /Users/g/.ssh/known_hosts:7
Are you sure you want to continue connecting (yes/no)? yes
jmcrawford
@jmcrawford
Mar 20 2017 02:06
This just means that your rig booted up and got assigned a different IP address than what it used to have
Scott Leibrand
@scottleibrand
Mar 20 2017 02:48
@garykidd what makes you think it "conked out"? that screenshot looks good to me...
@jmcrawford @JELCRAWFORD @Kdisimone @PieterGit @tim2000s Just opened openaps/oref0#427 - a workaround for undead COB - and would love your input on it.
garykidd
@garykidd
Mar 20 2017 02:57
@scottleibrand it just hangs theree...sorry I totally didnt explain it
it comes and goes---I think its a network thing
Scott Leibrand
@scottleibrand
Mar 20 2017 03:02
for networking issues, you'll want to be reviewing /var/log/openaps/network.log. You can use the wifi shortcut to see it in real time, or use something like less to look back at older entries
garykidd
@garykidd
Mar 20 2017 03:05
root@purplebird:~# wifi
At Sun Mar 19 22:47:03 EDT 2017 my local IP is: 192.168.1.178

At Sun Mar 19 22:47:03 EDT 2017, my wifi network name is GKNETWORKDS, and my public IP is: 67.83.189.244
Finished oref0-online.

Starting oref0-online.
At Sun Mar 19 22:48:02 EDT 2017 my local IP is: 192.168.1.178

At Sun Mar 19 22:48:03 EDT 2017, my wifi network name is GKNETWORKDS, and my public IP is: 67.83.189.244
Finished oref0-online.

Starting oref0-online.
At Sun Mar 19 22:49:03 EDT 2017 my local IP is: 192.168.1.178

At Sun Mar 19 22:49:03 EDT 2017, my wifi network name is GKNETWORKDS, and my public IP is: 67.83.189.244
Finished oref0-online.

Starting oref0-online.
At Sun Mar 19 22:50:02 EDT 2017 my local IP is: 192.168.1.178

At Sun Mar 19 22:50:03 EDT 2017, my wifi network name is GKNETWORKDS, and my public IP is: 67.83.189.244
Finished oref0-online.

Starting oref0-online.
At Sun Mar 19 22:51:03 EDT 2017 my local IP is: 192.168.1.178

At Sun Mar 19 22:51:03 EDT 2017, my wifi network name is GKNETWORKDS, and my public IP is: 67.83.189.244
Finished oref0-online.

Starting oref0-online.
At Sun Mar 19 22:52:03 EDT 2017 my local IP is: 192.168.1.178

At Sun Mar 19 22:52:03 EDT 2017, my wifi network name is GKNETWORKDS, and my public IP is: 67.83.189.244
Finished oref0-online.

Starting oref0-online.
At Sun Mar 19 22:53:02 EDT 2017 my local IP is: 192.168.1.178

At Sun Mar 19 22:53:03 EDT 2017, my wifi network name is GKNETWORKDS, and my public IP is: 67.83.189.244
Finished oref0-online.

Starting oref0-online.
At Sun Mar 19 22:54:02 EDT 2017 my local IP is: 192.168.1.178

At Sun Mar 19 22:54:02 EDT 2017, my wifi network name is GKNETWORKDS, and my public IP is: 67.83.189.244
Finished oref0-online.

Starting oref0-online.
At Sun Mar 19 22:55:02 EDT 2017 my local IP is: 192.168.1.178

At Sun Mar 19 22:55:02 EDT 2017, my wifi network name is GKNETWORKDS, and my public IP is: 67.83.189.244
Finished oref0-online.

Starting oref0-online.
At Sun Mar 19 22:56:03 EDT 2017 my local IP is: 192.168.1.178

At Sun Mar 19 22:56:03 EDT 2017, my wifi network name is GKNETWORKDS, and my public IP is: 67.83.189.244
Finished oref0-online.

Starting oref0-online.
At Sun Mar 19 22:57:03 EDT 2017 my local IP is: 192.168.1.178

At Sun Mar 19 22:57:03 EDT 2017, my wifi network name is GKNETWORKDS, and my public IP is: 67.83.189.244
Finished oref0-online.

Starting oref0-online.
At Sun Mar 19 22:58:02 EDT 2017 my local IP is: 192.168.1.178

At Sun Mar 19 22:58:02 EDT 2017, my wifi network name is GKNETWORKDS, and my public IP is: 67.83.189.244
Finished oref0-online.

Starting oref0-online.
At Sun Mar 19 22:59:04 EDT 2017 my local IP is: 192.168.1.178

At Sun Mar 19 22:59:04 EDT 2017, my wifi network name is GKNETWORKDS, and my public IP is: 67.83.189.244
Finished oref0-online.

Starting oref0-online.
At Sun Mar 19 23:00:05 EDT 2017 my local IP is: 192.168.1.178

At Sun Mar 19 23:00:05 EDT 2017, my wifi network name is GKNETWORKDS, and my public IP is: 67.83.189.244
Finished oref0-online.

Starting oref0-online.
At Sun Mar 19 23:01:02 EDT 2017 my local IP is: 192.168.1.178

At Sun Mar 19 23:01:02 EDT 2017, my wifi network name is GKNETWORKDS, and my public IP is: 67.83.189.244
Finished oref0-online.

Starting oref0-online.
At Sun Mar 19 23:02:04 EDT 2017 my local IP is: 192.168.1.178

At Sun Mar 19 23:02:04 EDT 2017, my wifi network name is GKNETWORKDS, and my public IP is: 67.83.189.244
Finished oref0-online.

Starting oref0-online.
At Sun Mar 19 23:03:03 EDT 2017 my local IP is: 192.168.1.178

At Sun Mar 19 23:03:03 EDT 2017, my wifi network name is GKNETWORKDS, and my public IP is: 67.83.189.244
Finished oref0-online.

Starting oref0-online.
At Sun Mar 19 23:04:03 EDT 2017 my local IP is: 192.168.1.178

At Sun Mar 19 23:04:03 EDT 2017, my wifi network name is GKNETWORKDS, and my public IP is: 67.83.189.244
Finished oref0-online.
maybe not
hmmm less
didnt work?
Scott Leibrand
@scottleibrand
Mar 20 2017 03:07
looks like your wifi is fine right now. it'd be less /var/log/openaps/network.log to see the whole history. use your PgUp/PgDown keys (or space and -) to scroll through it all and find whatever timeframe you think it was misbehaving
if the whole log (for timeframes you're on wifi) looks like what you pasted, then your wifi is fine
garykidd
@garykidd
Mar 20 2017 03:09
do spaces matter in network name?
I think I came back up about just prior to 9PM et (2hrs ago or so)
sarahspins
@sarahspins
Mar 20 2017 03:10
spaces don't show up in the log
garykidd
@garykidd
Mar 20 2017 03:11
ok
Starting oref0-online.
At Sat Mar 18 08:01:03 EDT 2017 my local IP is: 192.168.1.178

At Sat Mar 18 08:01:03 EDT 2017, my wifi network name is GKNETWORKDS, and my pub
lic IP is: 67.83.189.244
Finished oref0-online.

Starting oref0-online.
At Sat Mar 18 08:02:02 EDT 2017 my local IP is: 192.168.1.178

At Sat Mar 18 08:02:02 EDT 2017, my wifi network name is GKNETWORKDS, and my pub
lic IP is: 67.83.189.244
Finished oref0-online.

Starting oref0-online.
At Sat Mar 18 08:03:02 EDT 2017 my local IP is: 192.168.1.178

At Sat Mar 18 08:03:02 EDT 2017, my wifi network name is GKNETWORKDS, and my pub
lic IP is: 67.83.189.244
Finished oref0-online.

Starting oref0-online.
At Sat Mar 18 08:04:02 EDT 2017 my local IP is: 192.168.1.178

At Sat Mar 18 08:04:02 EDT 2017, my wifi network name is GKNETWORKDS, and my public IP is: 67.83.189.244
Finished oref0-online.

Starting oref0-online.
At Sat Mar 18 08:05:02 EDT 2017 my local IP is: 192.168.1.178

At Sat Mar 18 08:05:02 EDT 2017, my wifi network name is GKNETWORKDS, and my public IP is: 67.83.189.244
Finished oref0-online.

Starting oref0-online.
At Sat Mar 18 08:06:02 EDT 2017 my local IP is: 192.168.1.178

At Sat Mar 18 08:06:02 EDT 2017, my wifi network name is GKNETWORKDS, and my public IP is: 67.83.189.244
Finished oref0-online.

Starting oref0-online.
At Sat Mar 18 08:07:01 EDT 2017 my local IP is: 192.168.1.178

At Sat Mar 18 08:07:01 EDT 2017, my wifi network name is GKNETWORKDS, and my public IP is: 67.83.189.244
Finished oref0-online.

Starting oref0-online.
At Sat Mar 18 08:08:01 EDT 2017 my local IP is: 192.168
lil help with LIC IP vs. local IP?
Scott Leibrand
@scottleibrand
Mar 20 2017 03:22
Google for something like "NAT public IP private IP" to learn about how that all works
basically, that's your home router sharing a single public IP for the entire house, and translating between the private IPs on your wifi and the public IP for the outside
I thought I had fixed the way it removes spaces from the network name, but apparently not...
sarahspins
@sarahspins
Mar 20 2017 03:30
@scottleibrand all of my wifi networks (we have five at home) have spaces and no spaces show up in any logs
Scott Leibrand
@scottleibrand
Mar 20 2017 03:59
yeah, same here
jmcrawford
@jmcrawford
Mar 20 2017 03:59
@garykidd The time stamps on those logs all look pretty consistent, so no problem during these times. Try the 'uptime' command to show how long your rig has been up since the last reboot. Compare that to when you've had trouble accessing it. If the uptime is longer, then it's likely a network issue. But could it be that the whole rig is rebooting? If the uptime is about the same as your access problem, it may be rebooting for some reason.
gregtcm
@gregtcm
Mar 20 2017 05:04
I'm seeing this error pop up occasionally. It doesn't seem to cause any trouble, but thought I'd let y'all know about it in case it might be important.
determine-basal://text/shell/enact/suggested.json
reporting enact/suggested.json
Traceback (most recent call last):
  File "/usr/local/bin/openaps-report", line 82, in <module>
    app( )
  File "/usr/local/lib/python2.7/dist-packages/openaps/cli/__init__.py", line 52, in __call__
    self.epilog( )
  File "/usr/local/bin/openaps-report", line 69, in epilog
    super(ReportToolApp, self).epilog( )
  File "/usr/local/lib/python2.7/dist-packages/openaps/cli/__init__.py", line 75, in epilog
    self.create_git_commit( )
  File "/usr/local/lib/python2.7/dist-packages/openaps/cli/__init__.py", line 98, in create_git_commit
    self.repo.index.commit(msg)
  File "/usr/local/lib/python2.7/dist-packages/git/index/base.py", line 954, in commit
    author_date=author_date, commit_date=commit_date)
  File "/usr/local/lib/python2.7/dist-packages/git/objects/commit.py", line 393, in create_from_tree
    repo.head.set_commit(new_commit, logmsg=message)
  File "/usr/local/lib/python2.7/dist-packages/git/refs/symbolic.py", line 211, in set_commit
    self.set_object(commit, logmsg)
  File "/usr/local/lib/python2.7/dist-packages/git/refs/symbolic.py", line 240, in set_object
    return self._get_reference().set_object(object, logmsg)
  File "/usr/local/lib/python2.7/dist-packages/git/refs/reference.py", line 64, in set_object
    super(Reference, self).set_object(object, logmsg)
  File "/usr/local/lib/python2.7/dist-packages/git/refs/symbolic.py", line 237, in set_object
    return self.set_reference(object, logmsg)
  File "/usr/local/lib/python2.7/dist-packages/git/refs/symbolic.py", line 308, in set_reference
    fd = lfd.open(write=True, stream=True)
  File "/usr/local/lib/python2.7/dist-packages/gitdb/util.py", line 314, in open
    raise IOError("Lock at %r could not be obtained" % self._lockfilepath())
IOError: Lock at '/root/myopenaps/.git/refs/heads/master.lock' could not be obtained
Paul Dickens
@thebookins
Mar 20 2017 05:06
I'm seeing that too @gregtcm . Does oref0-reset-git fix it?
gregtcm
@gregtcm
Mar 20 2017 05:09
It usually doesn't show up on the next loop itteration. So, I'm not sure what causes it, or why it doesn't appear again for a while.
It's helpful for me to keep the l log running so I can keep watch on what's going on, and I notice this error every now and again.
Scott Leibrand
@scottleibrand
Mar 20 2017 05:16
yeah, if that occurs transiently it's not a big deal, although we should probably trim the ugly traceback from the logs. if it happens repeatedly and oref0-reset-git doesn't clean it up, we'll need to fix something
gregtcm
@gregtcm
Mar 20 2017 05:17
@scottleibrand Yes, so far, it doesn't show up very often. There is also another one or two different ones that pop up every once and a while. Would you like to see those as well?
Also, did you pass on the feature request of the xDrip multiple IP addresses for the REST upload? If not, I could do that, but you'd have to tell me the best place to log it.
Scott Leibrand
@scottleibrand
Mar 20 2017 05:20
I don't know anything about xDrip really. Not even sure which of the many things named xDrip y'all are using.
gregtcm
@gregtcm
Mar 20 2017 05:21
:smile:
Scott Leibrand
@scottleibrand
Mar 20 2017 05:21
as far as errors, I'm mostly interested in anything that causes actual problems with looping, or occurs often enough to be annoying. (but if it's annoying me, I'll probably have already fixed it) :)
gregtcm
@gregtcm
Mar 20 2017 05:22
xDrip+ is what I'm using ... and I think most others as it seems that the original xDrip isn't under active development .
:+1:
Scott Leibrand
@scottleibrand
Mar 20 2017 05:23
I would find the gitter channel for xDrip+ then and ask there, or otherwise open an issue in its github repo
gregtcm
@gregtcm
Mar 20 2017 05:32
Will do.
Sacha M
@coolestkidsever
Mar 20 2017 06:54
is anyone available to help me with edison setup please? im pretty sure i got it flashed ok, next step being Installing packages.. I was able to see the edison on my fing a few days ago (actaully still can) but unable to putty into .local (or IP) and going around in circles.. tried on a diff pc but still actually can't even serial into the edison again and don't know where to go (this is ending up much harder than the Pi setup!)
Sacha M
@coolestkidsever
Mar 20 2017 07:04
i can serial in, but can't putty in via IP or .local
and just don't know what i'm missing
Sacha M
@coolestkidsever
Mar 20 2017 07:49
I think the problem is i can't find the right driver for CDC ACM - has anyone has this issue?
peterfulvi
@peterfulvi
Mar 20 2017 13:05
I'm using an unlocked phone to monitor my offline rig. I'm new to mobile phones. Is there a way to get around needing a data plan to use tethering. I can get it to work than it stops.
elodaille01
@elodaille01
Mar 20 2017 13:22
hello everyone..sorry, but it doesn't work anymore for me..I've executed all the steps of the phase 2 again and again, but always the same result when I type the command tail -F /var/log/openaps/pump-loop.log !

login as: root
root@192.168.1.10's password:

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Mon Mar 20 13:58:49 2017 from 192.168.1.15
root@OpenAPSLucile:~# l
RileyLink OK
Version: subg_rfspy 0.8
SUCCESS

  • sleep 0.5
  • ./change_setting.py /dev/spidev5.1 0x0A 0x2E
    RileyLink OK
    Version: subg_rfspy 0.8
    SUCCESS
  • sleep 0.5
  • ./change_setting.py /dev/spidev5.1 0x0B 0x38
    RileyLink OK
    Version: subg_rfspy 0.8
    SUCCESS
  • sleep 0.5
  • exit 0
    /usr/local/bin/oref0-subg-ww-radio-parameters-timeout: 8: kill: No such process

mmtune: pump://JSON/mmtune/monitor/mmtune.json
reporting monitor/mmtune.json
"868.438", 5, -49 Starting pump-loop at Mon Mar 20 14:08:25 CET 2017:
Radio ok, Listening: .No pump comms detected from other rigs
Old settings refreshError, retrying

(above : what appears on my putty screen)
could help me please ? @scottleibrand or someone else ? Thank you so much
(I specify that I activated CRON)
sarahspins
@sarahspins
Mar 20 2017 15:38

Well about 36 hours into using OpenAPS my nightscout site went down.... and I'm over quota for CPU usage :( It won't be back up until tonight and since I'm absolutely unwilling to carry my Dex receiver around with me I'm back on Loop for the day, but I'm still not quite sure WHY that happened? The only other times I've been over CPU usage and had my site shut down was when I ran multiple re-deployments in a day, but I haven't messed with my github so that can't be it, the only thing I did do was add some connection strings to make IFTTT work.

Is having OpenAPS fetch glucose data from NS enough to push it over?

Tim Street
@tim2000s
Mar 20 2017 15:39
Hmmm. Looping grinds to a sudden halt when your transmitter dies at 50 days instead of the 150 that you normally get when using xDrip+.
@sarahspins I take it you are using Azure? It's the frequency of both pulling and pushing that breaks the Azure free tier. Most of us use Heroku now.
sarahspins
@sarahspins
Mar 20 2017 15:41
Boo, yes I am :(
I suppose I can set that up.... but it was working just fine with Loop :(
Tim Street
@tim2000s
Mar 20 2017 15:45
Loop and OpenAPS work very differently.
sarahspins
@sarahspins
Mar 20 2017 15:49
Yes I know
Matthias
@ceben80
Mar 20 2017 16:27

@francesc0-cgm I have splitted http-widget aliases into:

  • http-widget-enact
  • http-widget-rig
  • http-widget-pump
http-widget-enact = ! bash -c "( jq .timestamp ~/myopenaps/enact/enacted.json | awk '{print substr($0,13,5)}' && jq -r .reason ~/myopenaps/enact/enacted.json && echo -n 'TBR: ' && jq .rate ~/myopenaps/enact/enacted.json && echo -n 'IOB: ' && jq .IOB ~/myopenaps/enact/enacted.json )"

http-widget-rig = ! bash -c "( echo -n 'Edison: ' && (~/src/EdisonVoltage/voltage short) | awk '{print $2,$1}' )"

http-widget-pump = ! bash -c "( echo -n 'Pump: ' && cat ~/myopenaps/monitor/reservoir.json && echo -n 'U ' && jq .voltage ~/myopenaps/monitor/battery.json | tr '\n' 'v' && echo \" \" )"

xdrip-bg = ! bash -c "head -6 ~/myopenaps/xdrip/glucose.json | awk '{print $2}' | while read line; do echo -n $line; done | awk -F '(,)' '{print \"xdrip: \" substr($3,13,5) \", bg: \"$4 }' "

and revert the pump-loop cron line to the original one. Now the http-widget content is filled by:

* * * * * cd /root/myopenaps && openaps http-widget-enact > ~/myopenaps/enact/index.html && openaps http-widget-pump >> ~/myopenaps/enact/index.html && openaps http-widget-rig >> ~/myopenaps/enact/index.html && openaps xdrip-bg >> ~/myopenaps/enact/index.html

If you're encounted "network problems" please check if the SimpleHTTPServer is running by checking with ps -aux, the output should be similar to:

root@eddie-eb:~/myopenaps# ps -aux | grep -i "SimpleHTTPServer"
root       309  0.0  0.0   2036   504 ?        Ss   16:00   0:00 /bin/sh -c cd /root/myopenaps/enact && python -m SimpleHTTPServer 1337
root       310  0.0  0.6  13568  6584 ?        S    16:00   0:01 python -m SimpleHTTPServer 1337
root      1773  0.0  0.0   4320   936 pts/1    S+   17:25   0:00 grep -i SimpleHTTPServer
Scott Leibrand
@scottleibrand
Mar 20 2017 16:34
@elodaille01 I would try stopping the openaps pump-loop and running that command manually to see the full output.
Matthias
@ceben80
Mar 20 2017 16:34
AFAIK SimpleHTTPServer is onboard, I didn't have installed the server on my rig
sarahspins
@sarahspins
Mar 20 2017 16:41
alrighty... got it all set up and my rig switched over to the new URL - are there are gotchas with heroku that I'll need to watch for?
jmcrawford
@jmcrawford
Mar 20 2017 16:53
@sarahspins The Heroku interface looks different, but all the config variables are the same as they are on Azure. http://www.nightscout.info/wiki/welcome/set-up-nightscout-using-heroku
katie disimone
@Kdisimone
Mar 20 2017 17:30
@sarahspins the cob pill has ended up being a problem for our heroku. We took it off the enable list
Arlene Samowich
@webwiztn
Mar 20 2017 17:52
Hi, all! New here. My name is Arlene Samowich. I just received my Explorer Board and Intel Edison. Put it all together with battery and I do not have a red light. How do I figure out which component is not working? Thanks!
Saskia
@Missdazzle
Mar 20 2017 17:56
Hi Arlene @webwiztn , sorry for these maybe stupid questions, but: The battery is loaded? The Edison fits without any space?
Arlene Samowich
@webwiztn
Mar 20 2017 18:00
No such thing as a stupid question - I am definitely a neophyte! The battery is pushed in as far as it will go. The Edison fits - I followed the directions and used the recommended hardware.
Matthias
@ceben80
Mar 20 2017 18:10
@webwiztn you will need to flash the edison descripted in OpenAPS documentation.....
Arlene Samowich
@webwiztn
Mar 20 2017 18:11
So, flashing has to happen before the light comes on.
Scott Leibrand
@scottleibrand
Mar 20 2017 18:33
No, you should get a power light at least, and a battery charging light if the battery is unplugged or is charging.
Power LED is between the microUSB ports. Charging LED is in the corner by the JST
Dana Lewis
@danamlewis
Mar 20 2017 18:49
@webwiztn did you press the power button to turn it on?
@peterfulvi you should probably start Googling or talking to phone carriers/experts about that
peterfulvi
@peterfulvi
Mar 20 2017 18:51
I got it up and running,i have a sim card now
Arlene Samowich
@webwiztn
Mar 20 2017 19:16
When I attached cords to each port and then to my MAC, the charging led came on but not the power led. That is still the status. Where is the power button?!
Scott Leibrand
@scottleibrand
Mar 20 2017 19:16
that's the little black button next to the battery JST connector
Dana Lewis
@danamlewis
Mar 20 2017 19:16
ah. that’s probably it. small round circle over on the end by the jst connector
tiny
Scott Leibrand
@scottleibrand
Mar 20 2017 19:17
you might not have the Edison properly seated on the Explorer board: try popping it off and re-seating it firmly
Arlene Samowich
@webwiztn
Mar 20 2017 19:28
I reseated the Edison on the Explorer board. I pushed in on the tiny black button next to the battery connector. Charging light is on but not the power light.
Scott Leibrand
@scottleibrand
Mar 20 2017 19:42
try holding the black button for up to 10 seconds and see if anything changes
Arlene Samowich
@webwiztn
Mar 20 2017 19:43
Nothing happens.
Do I have a bad board?
Scott Leibrand
@scottleibrand
Mar 20 2017 19:44
more likely a bad Edison, but you'd need a second Explorer board and/or Edison to be able to see which it is
what city are you in? do you know anyone nearby you could sit down with and play swap-the-hardware to see which piece is problematic?
Arlene Samowich
@webwiztn
Mar 20 2017 19:46
I am in Nashville. Not aware of anyone doing OpenAPS.
Scott Leibrand
@scottleibrand
Mar 20 2017 19:48
Arlene Samowich
@webwiztn
Mar 20 2017 19:49
Too funny!
Scott Leibrand
@scottleibrand
Mar 20 2017 19:49
there is James Corbett (Greenbrier, TN USA)
that's @jcorbett80
Dana Lewis
@danamlewis
Mar 20 2017 19:51
@webwitzn there's someone driving down from TN to hang out with me in Hsv on April 7 if you haven't met up w anyone by then :smile:
Scott Leibrand
@scottleibrand
Mar 20 2017 19:51
or you could go ahead and order a second Edison + Explorer board, and then return whichever piece turns out to be bad for a replacement
Dana Lewis
@danamlewis
Mar 20 2017 19:51
He's not from Nashville but I know that's a short drive too.
Arlene Samowich
@webwiztn
Mar 20 2017 19:54
I'll go ahead and order new boards. If that doesn't resolve the issue, I'll drive down to HSV on the 7th - at your convenience! I may be pulling my hair out by then, regardless!!
jcorbett80
@jcorbett80
Mar 20 2017 20:18
@danamlewis @scottleibrand I am actually only 25 minutes north of Nashville but mine overheats constantly. Not sure we can figure much out with my parts. Willing to try if it is still needed. Right now mine is bricked again. I am letting it cool down so I can redo back to factory and do the whole process 1 more time.
Arlene Samowich
@webwiztn
Mar 20 2017 20:21
James, thanks for your offer. I just reordered both boards. Hopefully, I will end up with one useable set. I'll keep you posted. I hope you figure out your overheating issue. Thanks to everyone for your help! I'll be back!
mawhit
@mawhit
Mar 20 2017 20:23
I'm having some issues while attempting to flash my edison/explorer rig. Can't login to the edison now.
Dana Lewis
@danamlewis
Mar 20 2017 20:41
@jcorbett80 @webwiztn anyone who wants to drive to Hsv is invited :D whether they have a working setup or not! :) but no worries if you can’t make it.
@mawhit can you give a little more detail about your setup & where you’re stuck?
Arlene Samowich
@webwiztn
Mar 20 2017 20:45
@danamlewis Thanks! @jcorbett80 want to consider driving down to Huntsville together on April 7th?
mawhit
@mawhit
Mar 20 2017 20:48
@danamlewis I have a new edison with explorer block v1.2. Attempting to flash it for the first time. I'm using a Mac. The first time that I attempted to flash it the flashall shell failed because it looked like the device id for my edison was different than what was in the shell. I modified the shell and attempted the flash again. The shell quit running again and had this:Did you plug and reboot your board?
Now I can't get to the edison login prompt.
Paul Tinson
@ptinson
Mar 20 2017 20:55
Possibly a silly question, has anyone setup any way to feed in a set of test data to oref0? I want to be able to test my 3G connection with data and before i go constructing a set of mocks to generate data I thought it worth while asking here.
Scott Leibrand
@scottleibrand
Mar 20 2017 20:56
@mawhit you shouldn't have to modify the shell script afaik
Chuck Vann
@djtechman
Mar 20 2017 20:57
@ptinson when I stared with openAPS I was wearing a pump with incompatible firmware, so I just set up the APS-compatible pump and faked it into thinking it had a reservoir in it. Then I replicated all settings from current pump and just started the OpenAPS setup. I watched what it was doing and ran a lot of tests while the APS pump was unconnected. I even spent a day or two putting in carbs/boluses on the test pump to watch the IOB/COB calculations. Worked well... not sure if you have access to an extra pump like I did...
*started
Dana Lewis
@danamlewis
Mar 20 2017 20:58
@ptinson you could just borrow a friend’s nightscout URL for your tests - that’s probably simplest
mawhit
@mawhit
Mar 20 2017 20:58
@scottleibrand Documentation says that you might have to.
Scott Leibrand
@scottleibrand
Mar 20 2017 20:59
hmm, ok.
did you verify your data cables are actually passing data?
lots of troubleshooting steps in the docs focusing on swapping cables etc. because that's a common source of issues
mawhit
@mawhit
Mar 20 2017 21:00
e) If Edison reboots correctly but never gets picked up by the flashall.sh script and the flashing process does not start, check the Edison device ID. It will probably come out automatically after the flashall.sh script fails with a list of available devices connected to the machine. On Linux, you can run lsusb to get a list of usb devices with their device ID. If the device ID is different from the one expected on flashall.sh, you can edit the script and change lines containing: USB_VID=8087 & USB_PID=0a99 to whatever the Edison has for an ID. Some users have encountered their devices ID to be 8087:0a9e
Paul Tinson
@ptinson
Mar 20 2017 21:00
I have a source of data, about a year of nightscout data, but i dont have a spare pump at this stage. Trying to get one. Thansks @djtechman
mawhit
@mawhit
Mar 20 2017 21:00
I have 3 different cables that I've attempted to use.
Scott Leibrand
@scottleibrand
Mar 20 2017 21:01
but have you verified that they work? does the Edison show up in Finder with them, and can you get screen UART console with them?
I always verify those things before starting with the actual flashing process
mawhit
@mawhit
Mar 20 2017 21:07
Yes. Shows up in finder and I could get screen UART console at first. Now I can't get either to work after the last flash attempt.
Scott Leibrand
@scottleibrand
Mar 20 2017 21:08
ok, I would focus on UART console next then
mawhit
@mawhit
Mar 20 2017 21:08
Just try different cables out?
Scott Leibrand
@scottleibrand
Mar 20 2017 21:08
do you get a blank screen when starting up a screen session to the UART port? does it respond to hitting Enter?
mawhit
@mawhit
Mar 20 2017 21:09
Yes. Blank screen and doesn't respond to Enter.
Scott Leibrand
@scottleibrand
Mar 20 2017 21:10
ok, next I would try leaving that screen session up and rebooting the Edison. you should see the boot sequence
to reboot, you can hold down the little round black power button near the JST for like 10 seconds
Sacha M
@coolestkidsever
Mar 20 2017 21:11
any ideas on why i can serial into the edison but not putty into the .local/ip address?
Scott Leibrand
@scottleibrand
Mar 20 2017 21:11
and then press it again for like 3
@coolestkidsever perhaps you're not on the same local network? can the Edison ping google.com? does your computer have the same local subnet (first three numbers in the IP)?
mawhit
@mawhit
Mar 20 2017 21:13
@scottleibrand Ok. I'm in as root now
Sacha M
@coolestkidsever
Mar 20 2017 21:13
they were on same network (i'm at work now, without them so can't check) but only have one network/wifi at home. I checked the Ip address and subnet was the same
Scott Leibrand
@scottleibrand
Mar 20 2017 21:13
@mawhit is it running yocto or jubilinux?
katie disimone
@Kdisimone
Mar 20 2017 21:13
@coolestkidsever did your rig get a new IP address since you last looked for it.
mawhit
@mawhit
Mar 20 2017 21:13
yocto
Sacha M
@coolestkidsever
Mar 20 2017 21:13
@Kdisimone same IP address since I set it up
Scott Leibrand
@scottleibrand
Mar 20 2017 21:14
@mawhit ok, then you should be able to get the OTG cable connected, start your flashing process on your Mac, and do a reboot from the screen session and watch it reboot and try to flash
Sacha M
@coolestkidsever
Mar 20 2017 21:14
I can see it on fing (at home) and it's still the same ip
Scott Leibrand
@scottleibrand
Mar 20 2017 21:14
@mawhit but before that, we might want to verify the OTG port is really connected
@coolestkidsever what error message do you get trying to ssh?
@mawhit if you are still on yocto, the Edison should show up in Finder when you plug in OTG
Sacha M
@coolestkidsever
Mar 20 2017 21:15
it just times out
connection time out
mawhit
@mawhit
Mar 20 2017 21:16
@scottleibrand just got a message that it was using too much power when trying to plug into otg
Scott Leibrand
@scottleibrand
Mar 20 2017 21:16
hmm, that could mean a bad cable...
mawhit
@mawhit
Mar 20 2017 21:16
switching cable
Scott Leibrand
@scottleibrand
Mar 20 2017 21:17
@coolestkidsever when you get home, you might want to paste us the exact command you're trying? if that's correct and ssh to the IP address is timing out, you can try pinging that IP from your computer...
mawhit
@mawhit
Mar 20 2017 21:17
@scottleibrand Using new cable. I see the edison in finder.
Scott Leibrand
@scottleibrand
Mar 20 2017 21:18
:+1: ok, try flashing now, and watch the screen session as it goes
Sacha M
@coolestkidsever
Mar 20 2017 21:18
@scottleibrand ok will do.. I think I'm in the wrong time zone for most of you though, as noone seems to be around when i'm working on it :-)
Scott Leibrand
@scottleibrand
Mar 20 2017 21:19
or maybe the people who were around didn't see a specific enough question they knew how to answer?
you should be able to provide a lot more details now and get a response from someone
Sacha M
@coolestkidsever
Mar 20 2017 21:19
ok, thank you :-)
mawhit
@mawhit
Mar 20 2017 21:21
@scottleibrand It's flashing rootfs now. Just needed you looking over my shoulder for it to work. :smile:
Using the exact same cables as before too.
Scott Leibrand
@scottleibrand
Mar 20 2017 21:21
yeah, it's finicky, so you have to know how to get each step working before moving onto the next one
lots of people just continue without knowing if what they did worked or not, and then some later step fails
I'm really glad ERD is selling pre-flashed jubliniux Edisons now :)
Dana Lewis
@danamlewis
Mar 20 2017 21:22
:raised_hands: +1
mawhit
@mawhit
Mar 20 2017 21:23
Yeah, after I already had my non pre-flashed version. :smile:
This is fun though. The kind of stuff I like.
Dexcom receiver usb cable and old Samsung Galaxy S3 usb cable for the win.
katie disimone
@Kdisimone
Mar 20 2017 21:26
I think I may be the only one who enjoys flashing (edisons)
jcorbett80
@jcorbett80
Mar 20 2017 21:31
@Kdisimone I can do it in the dark with my monitor turned off if that tells you anything ;)
mawhit
@mawhit
Mar 20 2017 21:33
@Kdisimone I thought I'd be finished with this in 15 mins since I'm using your docs. :smile:
gregtcm
@gregtcm
Mar 20 2017 21:33
@Kdisimone Waiting for my new edison so I can flash again, too. And I'll test out your new windows doc.
Dana Lewis
@danamlewis
Mar 20 2017 21:34
@gregtcm great - will need a +1 on this PR before merging it to the docs
(or for anyone else about to flash an Edison on Windows - let me know)
jcorbett80
@jcorbett80
Mar 20 2017 21:35
@danamlewis I am getting ready to flash mine on a win10 64 bit machine.
Dana Lewis
@danamlewis
Mar 20 2017 21:37
@jcorbett80 cool! I’m making some tiny tweaks to the PR, give me ~5 min and I’ll give you an updated link for using for testing if you can wait that long :)
mawhit
@mawhit
Mar 20 2017 21:38
ubilinux is up and running on the rig now. Thank you @danamlewis @scottleibrand for the tech support and @Kdisimone for the docs! I get better/faster support here than I do at work.
katie disimone
@Kdisimone
Mar 20 2017 21:38
:+1:
jcorbett80
@jcorbett80
Mar 20 2017 21:38
@danamlewis I am about to hop in the shower. I can wait that long
gregtcm
@gregtcm
Mar 20 2017 21:39
@danamlewis Will do. It won't be until later this week. I have my endo appt and it's 5 hrs away, so it ends up being a multiday trip. Excited though, to show him my OpenAPS setup and see what he thinks of it all.
Also, how do I +1 on the PR? Here or is it part of the PR process in Github?
Dana Lewis
@danamlewis
Mar 20 2017 21:40
on Github - you’ll just comment on the PR if it’s still open then.
gregtcm
@gregtcm
Mar 20 2017 21:40
Got it. Thanks.
Dana Lewis
@danamlewis
Mar 20 2017 21:41
For anyone testing today: https://github.com/Kdisimone/docs/blob/758b588dac7d1150fed10b28685ee0b0e41b6e29/docs/docs/walkthrough/phase-0/windows-edison.md <—to see the new Windows-only instruction page. Need 1-2 reviewers to say if it’s missing anything or if it works before we merge it. (@jcorbett80 for when you get back use this version)
Comments/+1s/etc can go on the PR page here: openaps/docs#727
High five to @Kdisimone for sacrificing herself to get a PC to add more screenshots in to the docs :)
jcorbett80
@jcorbett80
Mar 20 2017 21:41
@danamlewis give me 10-15 mins
Dana Lewis
@danamlewis
Mar 20 2017 21:42
no rush on my end :) just wanted it to be ready for you since you’re doing us the favor of testing it!
jcorbett80
@jcorbett80
Mar 20 2017 21:42
@danamlewis this is just a Monday shower....not a Sunday morning go to church shower
Dana Lewis
@danamlewis
Mar 20 2017 21:43
not sure I know the difference or want to :) but this means I can go get the lunch out of the microwave that’s been beeping at me for the last half hour. heh.
danamlewis @danamlewis wonders about teaching Alexa to listen for recurring microwave beeping to a) automatically set Eating Soon and b) remind me to eat. lol
PopcornPam
@PopcornPam_twitter
Mar 20 2017 21:49
Hi all, I was unable to flash jiinlinux to my edison yesterday, and am getting set to try again. I want to make sure I am using the correct document. This is for a mac . Is this the right place to be? http://openaps.readthedocs.io/en/latest/docs/walkthrough/phase-0/edison-explorer-board-Mac.html
jcorbett80
@jcorbett80
Mar 20 2017 21:51
@danamlewis I forgot....you still live in the deeper south. The Sunday morning one is the one you use the soap. 😊
Dana Lewis
@danamlewis
Mar 20 2017 21:51
I wish I was in the South, I think they have sunshine there ;) ::looks despairingly out the window at the Seattle gray:: :)
@PopcornPam_twitter yup, that’s the best page to use, although if you run into any issues the main edison setup page may have some other good troubleshooting tips, too
jcorbett80
@jcorbett80
Mar 20 2017 21:53
I thought you were in the south. Not sure why I thought that. That explains everything then....a northerner. ;)
Dana Lewis
@danamlewis
Mar 20 2017 21:53
bahaha. I’m from Alabama, that’s why you’re confused. (and that’s why we’re doing a Hsv meetup, because I’ll be in Hsv for a few days again soon)
jcorbett80
@jcorbett80
Mar 20 2017 21:55
Aaahhh now it all makes sense. Louisiana, Mississippi, and Tennessee
Paul Tinson
@ptinson
Mar 20 2017 21:55
@danamlewis @scottleibrand Do you know if the jubilinux image will get updated over time?
PopcornPam
@PopcornPam_twitter
Mar 20 2017 21:58
I think I might be getting stuck at step 1-2, I keep getting this message. Is it ok?
Pamelas-MacBook-Air:~ pamelashwartz$ brew install dfu-util coreutils gnu-getopt
Warning: dfu-util-0.9 already installed
Warning: coreutils-8.27 already installed
Warning: gnu-getopt is a keg-only and another version is linked to opt.
Use brew install --force if you want to install this version
jcorbett80
@jcorbett80
Mar 20 2017 22:05
@danamlewis I am going through step by step. windows has a right click feature that does all unzipping without having to download. i think it started with win 95. so what you have about downloading winzip is good but for most just another step. If you right click choose extract all it will ask you where and off you go. Just noting as I go.
Dana Lewis
@danamlewis
Mar 20 2017 22:07
want to actually comment on the PR? that way @Kdisimone & others reviewing will see them in context and we can figure out what to edit/improve
jcorbett80
@jcorbett80
Mar 20 2017 22:09
yes.
Dana Lewis
@danamlewis
Mar 20 2017 22:10
:+1: thx
sarahspins
@sarahspins
Mar 20 2017 22:10
@PopcornPam_twitter yes, those are installed on your local machine
so no need to keep installing them :)
PopcornPam
@PopcornPam_twitter
Mar 20 2017 22:11
ok, thanks!
sarahspins
@sarahspins
Mar 20 2017 22:11
it really doesn't hurt to walk through ALL of the steps again though - anything that doesn't need to be redone will basically give you a similar message
you can't break anything doing it repeatedly :)
but those warnings are fine
PopcornPam
@PopcornPam_twitter
Mar 20 2017 22:12
I tried uninstalling just gnu-getopt and reinstalling, and now the message looks like the one on the document.. so heres hoping!
jcorbett80
@jcorbett80
Mar 20 2017 22:14
@danamlewis since this is not in a merged area...how do i get to it?
PopcornPam
@PopcornPam_twitter
Mar 20 2017 22:15
erg, still not working. I keep getting U-boot & Kernel System Flash Success... in less than a minute
Any thoughts on next steps? I went through all steps about 20 times last night and kept getting the same message, I also tried with different cables
katie disimone
@Kdisimone
Mar 20 2017 22:18

@jcorbett80 I was on a windows 7 machine and the right click for unzip or extract was not available. I looked everywhere.

But yes, worth editing to include mention that it may be available for others.

jcorbett80
@jcorbett80
Mar 20 2017 22:20
@Kdisimone wow. I've been using it for years. maybe a 64 bit vrs 32 bit? Then i will just add a one time blurp and a single picture rather than at each step
katie disimone
@Kdisimone
Mar 20 2017 22:21
64 bit
It was bizarre. I looked EVERYWHERE to get it going because it is by far easier to do it that way. But, I also didn't mind because I'm sure there will be others who end up needing a helper program
That screen shot of the computer specs was the one I was using
jcorbett80
@jcorbett80
Mar 20 2017 22:23
@Kdisimone no telling. do you also have a mac? maybe the windows machine got sick sitting to close to the mac.
katie disimone
@Kdisimone
Mar 20 2017 22:23
My mac probably made sure that the windows was a more painful experience.
jcorbett80
@jcorbett80
Mar 20 2017 22:24
@Kdisimone sorry...it was just to easy to get a cheap shot in there
katie disimone
@Kdisimone
Mar 20 2017 22:24
(I'm mac)
Dana Lewis
@danamlewis
Mar 20 2017 22:25
@jcorbett80 openaps/docs#727
jcorbett80
@jcorbett80
Mar 20 2017 22:25
I'm android but can use Windows...and when all the mac people can't fix thier machines. I typically do that also so they dont have to goto a genius and have them reset to factory
@danamlewis thanks
Scott Leibrand
@scottleibrand
Mar 20 2017 22:26
@ptinson I don't think the jubilinix image has been updated since we started using it. Which is fine, since we apt-get upgrade first thing anyway.
Dana Lewis
@danamlewis
Mar 20 2017 22:28
@PopcornPam_twitter where are you stuck?
jcorbett80
@jcorbett80
Mar 20 2017 22:28
going to get supper on the table and will keep going after
(I'm also cook)
PopcornPam
@PopcornPam_twitter
Mar 20 2017 22:29
I have been going through each of the steps on http://openaps.readthedocs.io/en/latest/docs/walkthrough/phase-0/edison-explorer-board-Mac.html and it finishes flashing really soon, and when I reboot a few times it gives me yocto, not unilinux for the edison login
I don't know where I am messing up
It all seems fine til it gets to the end and is not right
Paul Tinson
@ptinson
Mar 20 2017 22:30
@scottleibrand which is good, just hoping to include the usb-serial drivers in the image, otherwise i have to compile them.
PopcornPam
@PopcornPam_twitter
Mar 20 2017 22:32
It also keeps repeating DFU complete CRC32: 0xf9484cbb
DOWNLOAD ... OK
Ctrl+C to exit ... with just one # and not repeated ### like the docs show
This shows up after about 30 seconds Flashing rootfs, (it can take up to 10 minutes... Please be patient)
Rebooting
U-boot & Kernel System Flash Success...
Your board needs to reboot to complete the flashing procedure, please do not unplug it for 2 minutes.
Pamelas-MacBook-Air:jubilinux pamelashwartz$

And this in the edison terminal window
Poky (Yocto Project Reference Distro) 1.7.2 edison ttyMFD2

edison login:

elodaille01
@elodaille01
Mar 20 2017 23:00
@Kdisimone please I don't understand this part of your doc ..I know it's easy..but..so tired !! sorry : 'Once you have completed these steps, log on to Heroku or Azure and disconnect the deployment source. Thereafter choose your cgm-remote-monitor github repository as source again.' in NIGHTSCOUT INTEGRATION/nightscout setup'
@Kdisimone how do I disconnect the deployment source please ?
katie disimone
@Kdisimone
Mar 20 2017 23:04
Where is that?
elodaille01
@elodaille01
Mar 20 2017 23:04
docs/docs/docs/walkthrough/phase-1/nightscout-setup.md
NIGHTSCOUT INTEGRATION/nightscout setup
elodaille01
@elodaille01
Mar 20 2017 23:17
are you still here @Kdisimone ?
tynbendad
@tynbendad
Mar 20 2017 23:18
Unnecessary question since I haven't received all my parts yet, but I'll ask anyway... When using explorer+g5 receiver direct connection, how does the nightly recharge work? Can you just plug the explorer​ in and leave everything else plugged in as is, or do you have to disconnect the receiver? How about charging the receiver, how often will that be needed? (We are using iPhone currently but I'd like to try the receiver on rig).
PopcornPam
@PopcornPam_twitter
Mar 20 2017 23:20
@danamlewis is it possible I got a bum edison board, and need to replace it?
Scott Leibrand
@scottleibrand
Mar 20 2017 23:32
@PopcornPam_twitter no, if you can get into yocto, the Edison is fine
katie disimone
@Kdisimone
Mar 20 2017 23:32
@tynbendad I'll experiment tonight with the G4 and let you know. But I expect yes, just leave everything plugged in
tynbendad
@tynbendad
Mar 20 2017 23:33
@Kdisimone thx!
katie disimone
@Kdisimone
Mar 20 2017 23:33
@elodaille01 sorry. Left for a bit. I'll look up where you are. I didn't write any of the Nightscout sections (nor provide any edits to date) so I'll have to look.
PopcornPam
@PopcornPam_twitter
Mar 20 2017 23:34
I'm a bit at a loss for next steps. Steps 1-1 through 1-6 seem to go as it is supposed to, but once i type reboot it finishes super quick. I think I have all the stuff installed correctly
Scott Leibrand
@scottleibrand
Mar 20 2017 23:35
there should be a log file created by the flashall script: you might want to look at that
PopcornPam
@PopcornPam_twitter
Mar 20 2017 23:36
how do I find that?
Scott Leibrand
@scottleibrand
Mar 20 2017 23:38
look at the files in that directory
PopcornPam
@PopcornPam_twitter
Mar 20 2017 23:39
Is this a directory on the edison, or on my computer? Sorry, super new to programming
Scott Leibrand
@scottleibrand
Mar 20 2017 23:40
in the directory you're flashing things from on your computer
elodaille01
@elodaille01
Mar 20 2017 23:41
OK @Kdisimone
Scott Leibrand
@scottleibrand
Mar 20 2017 23:41
if you're not comfortable moving around your computer and looking at files, you might want to search online for a tutorial on how to do so
PopcornPam
@PopcornPam_twitter
Mar 20 2017 23:42
got it, ok, dfu-util: Invalid DFU suffix signature
dfu-util: A valid DFU suffix will be required in a future dfu-util release!!!
dfu-util: No DFU capable USB device available
does this imply a bad cable?
Scott Leibrand
@scottleibrand
Mar 20 2017 23:45
that's one possibility
scroll up and follow the steps I had @mawhit go through earlier
those should also be in the docs under troubleshooting. If not, a PR would be appreciated
elodaille01
@elodaille01
Mar 20 2017 23:47
blob
please @scottleibrand or @danamlewis or @Kdisimone , when I had to add OPENAPS on my heroku account , I just write 'openaps' like this :
blob
sorry I hit enter twice
no 'enable' to write ?
PopcornPam
@PopcornPam_twitter
Mar 20 2017 23:57
@scottleibrand when I reboot (via the command) it always comes up in rescue mode, and says failed reading register