These are chat archives for nightscout/intend-to-bolus

11th
Jul 2017
Brian Rabinovitz
@bdr1177
Jul 11 2017 00:04
@danamlewis @Mackwe thanks for the replies. I don't have paper trail set up. I thought that was just for remote monitoring. The pump loop log is what I was looking for (thanks Dana).
Scott Leibrand
@scottleibrand
Jul 11 2017 00:20
@bdr1177 @Mackwe when looking back through pump-loop.log, less /var/log/openaps/pump-loop.log is usually easiest. you can google for "less keyboard shortcuts" to learn how to get around. G gets you to the end, for starters.
or maybe it's gg - my muscle memory isn't very transferable to declarative memory :)
Brian Rabinovitz
@bdr1177
Jul 11 2017 00:25
@scottleibrand Thanks. I think that's what I was doing before but hadn't done it in a while and forgot how. Need to keep better notes this time.
Brian Rabinovitz
@bdr1177
Jul 11 2017 00:43
If Edison shut down because it overheated would there be evidence of that in the logs?
Scott Leibrand
@scottleibrand
Jul 11 2017 00:45
I don't recall if there is by default. someone added sensors to their cron to log to syslog, but not sure if that got added to oref0-setup or not
if not, that would be a useful PR
Brian Rabinovitz
@bdr1177
Jul 11 2017 00:53
I wouldn't know how to do that myself, but I could open an issue if that would help.
Scott Leibrand
@scottleibrand
Jul 11 2017 01:01
that's always a good start
Brian Rabinovitz
@bdr1177
Jul 11 2017 01:25
Apparently it's 'G' to get to the end of the log.
mkericson
@mkericson
Jul 11 2017 01:30
Having trouble connecting to my edison. Was manually able to install the driver and it shows up as: "Intel Edison DFU Interface" but not connected to any COM port so I'm not having luck getting a terminal connection. Any thoughts?
Scott Leibrand
@scottleibrand
Jul 11 2017 02:05
check/swap cables?
mkericson
@mkericson
Jul 11 2017 02:09
@scottleibrand Yes. Did that with two new Dexcom cables. Could Window Vista be the problem..
wharper11
@wharper11
Jul 11 2017 02:12

@danamlewis
Starting pump-loop at Mon Jul 10 20:06:03 MDT 2017:
Waiting up to 4 minutes for new BG: ........................Radio ok. Listening: .No pump comms detected from other rigs
Profile less than 60m old. glucose.json newer than temp_basal.json. Temp refresIndexError: bytearray index out of range
Error, retrying

Starting pump-loop at Mon Jul 10 20:11:11 MDT 2017:
Waiting up to 4 minutes for new BG: .glucose.json newer than pump_loop_completed
Radio ok. Listening: .

Scott Leibrand
@scottleibrand
Jul 11 2017 02:13
@mkericson Windows Vista is definitely a problem: it's way old and unsupported. Dunno if that means it won't work, though.
@wharper11 are you seeing undefined COB in pump-loop.log as well? have you had an otherwise clean loop that shows just that error and not any pump comms errors?
wharper11
@wharper11
Jul 11 2017 02:16
@scottleibrand - COB undefined in openaps pill. I'll run pump-loop log...
Sebastien Lussier
@SebastienLussier
Jul 11 2017 02:18
Has anyone tried the Orange PI IOT board ? http://www.orangepi.org/OrangePi2GIOT/
@Mackwe @francesc0-cgm this board has a SIM card slot
wharper11
@wharper11
Jul 11 2017 02:22
@scottleibrand - tailing and the only other issue I see is "date: invalid date '@'"
Scott Leibrand
@scottleibrand
Jul 11 2017 02:23
can you paste the context for that one?
wharper11
@wharper11
Jul 11 2017 02:23
Starting pump-loop at Mon Jul 10 20:16:02 MDT 2017:
Waiting up to 4 minutes for new BG: .......date: invalid date ‘@’
.................Radio ok. Listening: .No pump comms detected from other rigs
Profile less than 60m old. glucose.json newer than temp_basal.json. Temp refreshmmeowlink.exceptions.InvalidPacketReceived
Error, retrying
papertrail coming up
Scott Leibrand
@scottleibrand
Jul 11 2017 02:24
ok, if that shows up inside wait_for_bg it's a non-issue. it's just a race condition where the file gets deleted and recreated.
I'm seeing lots of pump comms issues on everything you paste, though. not much sense troubleshooting anything else until you have a clean run without those
may need to move your rig closer to the pump.
wharper11
@wharper11
Jul 11 2017 02:25
@scottleibrand ok
little man has it on a spybelt about 2 inches from the pump
anything from papertrail you want to see?
@scottleibrand - looking better now.
Chris Reilly
@rainbow-lazer
Jul 11 2017 02:30

@scottleibrand I took a dig into the code, it's just using standard network service start/stop commands.

I'm able to get a pretty good connection over bluetooth, but the wlan0 is acting funny and doesn't seem to be able to connect at all anymore. When I run ifconfig here's what I get:

bnep0     Link encap:Ethernet  HWaddr 58:a8:39:01:32:c8  
          inet addr:172.20.10.4  Bcast:172.20.10.15  Mask:255.255.255.240
          inet6 addr: 2607:fb90:43:d356:5aa8:39ff:fe01:32c8/64 Scope:Global
          inet6 addr: fe80::5aa8:39ff:fe01:32c8/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:129 errors:0 dropped:0 overruns:0 frame:0
          TX packets:130 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:49155 (48.0 KiB)  TX bytes:31106 (30.3 KiB)

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:2 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:276 (276.0 B)  TX bytes:276 (276.0 B)

sit0      Link encap:IPv6-in-IPv4  
          NOARP  MTU:1480  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

usb0      Link encap:Ethernet  HWaddr 02:00:86:70:8c:50  
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

wlan0     Link encap:Ethernet  HWaddr 00:00:00:00:00:00  
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

is it weird that wlan0 has no inet addr entry?

Scott Leibrand
@scottleibrand
Jul 11 2017 02:32
what the heck is that sit0 interface? do you know how you got that?
wharper11
@wharper11
Jul 11 2017 02:34
@scottleibrand
Accel. Carb Impact: 10 mg/dL per 5m; ACI Duration: 0.4 hours
UAM Impact: 9.1 mg/dL per 5m; UAM Duration: 1.1 hours
minPredBG: 124 minIOBPredBG: 128 minCOBPredBG: 103 avgPredBG: 124 COB: 4 carbs: 36
BG projected to remain above 110 for 55 minutes
bgUndershoot: -32 zeroTempDuration: 55 zeroTempEffect: 118 carbsReq: -30
determine-basal://text/shell/enact/suggested.json
reporting enact/suggested.json
{"temp":"absolute","bg":125,"tick":"+3","eventualBG":146,"snoozeBG":146,"insulinReq":0.09,"reservoir":null,"deliverAt":"2017-07-11T02:33:20.285Z","minPredBG":124,"predBGs":{"IOB":[125,127,129,131,133,134,135,135,136,135,135,134,133,132,131,130,129,129,128,128,128,128,128,129,129,130,131,132,133,134,134,135,135,135,136],"aCOB":[125,128,129,128,126,122,119,117,114,112,110,109,107,106,105,104,104,103,103,103,103,103,103,103,104,105,106,107,107,108,109,109,110,110,110,110,111,111,111,111,111,110],"COB":[125,127,127,127,126,123,120,117,115,113,111,109,108,107,106,105,105,104,104,103,103,103,104,104,105,106,107,108,108,109,110,110,110,111]},"COB":4,"IOB":0.232,"reason":"COB: 4, Dev: 48, BGI: -5.02, ISF: 117, Target: 114, minPredBG 124, IOBpredBG 136, COBpredBG 111; Eventual BG 146 >= 119, temp 1.375 >~ req 1.3U/hr. "}
enact/enacted.json: cat: enact/enacted.json: No such file or directory
Error, retrying
Waiting for 30s silence before mmtuning
Radio ok. Listening: ..............
Dana Lewis
@danamlewis
Jul 11 2017 02:34
COB is 4 there
wharper11
@wharper11
Jul 11 2017 02:35
@danamlewis - it showed for 1 loop then back to undefined
Dana Lewis
@danamlewis
Jul 11 2017 02:35
in just the pill? it’s showing COB properly in the logs, though
wharper11
@wharper11
Jul 11 2017 02:36
yeah, showing in logs but not in the openaps pill.
Chris Reilly
@rainbow-lazer
Jul 11 2017 02:38
@scottleibrand no clue! 😅
Scott Leibrand
@scottleibrand
Jul 11 2017 02:38
@wharper11 do your purple prediction lines show up?
you might have a problem with your mlab devicestatus collection
wharper11
@wharper11
Jul 11 2017 02:39
@scottleibrand - yep, purple predicts are there.
Scott Leibrand
@scottleibrand
Jul 11 2017 02:40
screenshot of pill please?
wharper11
@wharper11
Jul 11 2017 02:40
wait...
Scott Leibrand
@scottleibrand
Jul 11 2017 02:40
which rig did you update?
the rig you updated looks fine. it's your other rig reporting undefined
wharper11
@wharper11
Jul 11 2017 02:43
just moved the un-updated rig out of range...
Scott Leibrand
@scottleibrand
Jul 11 2017 02:43
:+1:
wharper11
@wharper11
Jul 11 2017 02:50
ok @scottleibrand and @danamlewis - turned off the un-updated and we're getting COB (YAY!!)
Dana Lewis
@danamlewis
Jul 11 2017 02:50
:+1: now to upgrade the other rig when you are ready to turn it back on
wharper11
@wharper11
Jul 11 2017 02:51
I'm on it. Thanks!
Dana Lewis
@danamlewis
Jul 11 2017 02:51
:+1: :clap:
Dana Lewis
@danamlewis
Jul 11 2017 02:58
All: We’re really close now to release, but we need some final testers. We’ve made a few bug-related fixes, so for anyone who is running dev, please do us a favor and re-pull dev, start running it, and let us know here if you have any issues, and please comment in the PR (openaps/oref0#424) describing your setup & confirming if it works fine for you & your setup of choice.
Scott Leibrand
@scottleibrand
Jul 11 2017 02:59
please also re-run oref0-setup (with oref0-runagain is fine) before testing
Chris Reilly
@rainbow-lazer
Jul 11 2017 02:59
@rainbow-lazer @scottleibrand after some googling, sit0 is an interface for using ipv6 traffic over ipv4. not sure how it got there or if it's needed/related to the cranky wifi...
Scott Leibrand
@scottleibrand
Jul 11 2017 03:00
I suspect it is, but not sure what DHCP options or whatever your router would give out to make the rig autoconfigure itself that way
you might try it on your phone's hotspot wifi to see if it works properly there
Chris Reilly
@rainbow-lazer
Jul 11 2017 03:01
the phone's BT works pretty well, but seems like any wifi connection fails, even the phone's
Scott Leibrand
@scottleibrand
Jul 11 2017 03:01
does it do the same weird stuff in ifconfig with the phone's wifi hotspot?
Dana Lewis
@danamlewis
Jul 11 2017 03:03
@franckvalli so it looks like it’s not refreshing your old pump history for some reason. does that keep happening if you run it multiple times?
Chris Reilly
@rainbow-lazer
Jul 11 2017 03:06
@scottleibrand yes, looks like sit0 is still there, and the wifi won't connect (had to get to the board over serial this time)
lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

sit0      Link encap:IPv6-in-IPv4  
          NOARP  MTU:1480  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

usb0      Link encap:Ethernet  HWaddr 02:00:86:70:8c:50  
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

wlan0     Link encap:Ethernet  HWaddr 00:00:00:00:00:00  
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
Scott Leibrand
@scottleibrand
Jul 11 2017 03:08
@rainbow-lazer does your /etc/network/interfaces or /etc/wpa_supplicant/wpa_supplicant.conf show anything non-standard?
Chris Reilly
@rainbow-lazer
Jul 11 2017 03:11

@scottleibrand I'm pretty sure they're standard, but maybe I'm missing something obvious?

/etc/network/interfaces:

# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback

auto usb0 iface usb0 inet static
    address 192.168.2.15
    netmask 255.255.255.0

auto wlan0
iface wlan0 inet dhcp
    wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
         # For WPA
   # wpa-ssid Emutex
   # wpa-psk passphrase
    # For WEP
    #wireless-essid Emutex
    #wireless-mode Managed
    #wireless-key s:password
# And the following 4 lines are for when using hostapd...
#auto wlan0
#iface wlan0 inet static
#    address 192.168.42.1
#    netmask 255.255.255.0
"/etc/network/interfaces" 24L, 557C                           1,1           Top

/etc/wpa_supplicant/wpa_supplicant.conf (asterisks are for display here only):

ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev

 network={
    ssid="rainbow_lazer"
    psk="*******"
}

#network={
#       ssid="tbennyt"
#       psk="******"
#}

#network={
#        ssid="tbennyt-5"
#        psk="******"
#}
~
~
~
~
~
~
~
"/etc/wpa_supplicant/wpa_supplicant.conf" 16L, 231C           1,1           All
franckvalli
@franckvalli
Jul 11 2017 03:13
Screen Shot 2017-07-10 at 8.07.03 PM.png
Hi, after turning of my rig for 8 hours I cannot make it work again. It seems that my "Old pump history" does not want to refresh. What should I do?
Scott Leibrand
@scottleibrand
Jul 11 2017 03:13
@rainbow-lazer looks normal to me. maybe comment out the home wifi and uncomment phone, and then reboot?
Chris Reilly
@rainbow-lazer
Jul 11 2017 03:14
@scottleibrand thanks. that config is currently for the phone's wifi, which doesn't seem to connect. BT works fine though...
Scott Leibrand
@scottleibrand
Jul 11 2017 03:14
@franckvalli looks like you have some git weirdness. what does git status say?
also, try cd ~ && git status to check if you have an extra repo one level up
@rainbow-lazer and have you rebooted to see if the sit0 goes away?
franckvalli
@franckvalli
Jul 11 2017 03:15
Screen Shot 2017-07-10 at 8.14.56 PM.png
aliceinnowonderlands
@aliceinnowonderlands
Jul 11 2017 03:16
Hi everyone, congrats me, i'm officially half-cyborg now - my loop seems to be working now
Chris Reilly
@rainbow-lazer
Jul 11 2017 03:16
@scottleibrand I have, looks like it's stuck there!
wharper11
@wharper11
Jul 11 2017 03:16
@aliceinnowonderlands YAY!
:+1:
franckvalli
@franckvalli
Jul 11 2017 03:18
Screen Shot 2017-07-10 at 8.14.56 PM.png
aliceinnowonderlands
@aliceinnowonderlands
Jul 11 2017 03:20
thanks @wharper11 =) I have one concern still - right now cgm data use long road from transmitter->xdip on android phone->nightscout in cloud -> edison, and i'm dreaming about fully offline rig like receiver->edison
but it just doesnt work when i just plug it in
Could not parse input data: { [Error: Cannot find module '/root/exobeaver/monitor/glucose.json'] code: 'MODULE_NOT_FOUND' }
Scott Leibrand
@scottleibrand
Jul 11 2017 03:22
@franckvalli looks like that scrolled off the screen. let's make it a bit easier to read the output: cd ~ && git status | head; cd ~/franckopenaps && git status | head
aliceinnowonderlands
@aliceinnowonderlands
Jul 11 2017 03:22
receiver is 100% full charged, cable is working (i got data by lsusb), i did wait for 30+ min
franckvalli
@franckvalli
Jul 11 2017 03:22
@scottleibrand Sorry I am new to this, how can I send you attachaments?
Scott Leibrand
@scottleibrand
Jul 11 2017 03:22
dragging and dropping them into gitter is one easy way
franckvalli
@franckvalli
Jul 11 2017 03:22
Screen Shot 2017-07-10 at 8.14.56 PM.png
@scottleibrand it is then addressed to me instead of you
Scott Leibrand
@scottleibrand
Jul 11 2017 03:23
@aliceinnowonderlands which CGM option did you choose in oref0-setup?
franckvalli
@franckvalli
Jul 11 2017 03:23
do you see what I have just posted
Scott Leibrand
@scottleibrand
Jul 11 2017 03:23
I do, but it doesn't have all the info I need
can you re-run it with | head, like cd ~ && git status | head; cd ~/franckopenaps && git status | head
the | head bits tell it to only print the first 10 lines of output from each command
aliceinnowonderlands
@aliceinnowonderlands
Jul 11 2017 03:24
@scottleibrand here was only one question about gcm in script setup, i did type G5
franckvalli
@franckvalli
Jul 11 2017 03:24
Screen Shot 2017-07-10 at 8.23.56 PM.png
Scott Leibrand
@scottleibrand
Jul 11 2017 03:25
@franckvalli you still didn't run the command I asked you to
franckvalli
@franckvalli
Jul 11 2017 03:25
@scottleibrand I have just zoomed out, hopefully it does it
aliceinnowonderlands
@aliceinnowonderlands
Jul 11 2017 03:25
"What kind of CGM are you using? (i.e. G4, ShareBLE, G4-raw, G5, MDT, xdrip) G5
Ok, G5 it is."
Scott Leibrand
@scottleibrand
Jul 11 2017 03:25
@franckvalli but, even with just that output I can see that you do indeed have an extra git repo you shouldn't have
@franckvalli try rm -rf ~/.git to remove that
franckvalli
@franckvalli
Jul 11 2017 03:26
Screen Shot 2017-07-10 at 8.26.07 PM.png
Screen Shot 2017-07-10 at 8.26.07 PM.png
Dana Lewis
@danamlewis
Jul 11 2017 03:26
@aliceinnowonderlands do you want to do g5 receiver -> rig? or you’re wanting g5 transmitter ->xdrip on android phone -> rig?
franckvalli
@franckvalli
Jul 11 2017 03:29
Screen Shot 2017-07-10 at 8.28.48 PM.png
Screen Shot 2017-07-10 at 8.29.10 PM.png
aliceinnowonderlands
@aliceinnowonderlands
Jul 11 2017 03:31
"g5 receiver -> rig" seems to be what i want atm =)
never had think about "g5 transmitter ->xdrip on android phone -> rig" before, eventually want to try it too
Dana Lewis
@danamlewis
Jul 11 2017 03:32
g5 transmitter->xdrip on android-> rig is great for offline looping and monitoring if you’re already an android and xdrip user
franckvalli
@franckvalli
Jul 11 2017 03:32
@scottleibrand thanks, I ran the command
@scottleibrand Should I just reboot then?
wharper11
@wharper11
Jul 11 2017 03:37
@danamlewis @scottleibrand - both rigs updated, both rigs showing COB. Thank you very much!!!!!
aliceinnowonderlands
@aliceinnowonderlands
Jul 11 2017 03:40
@wharper11 congrats you too! =)
franckvalli
@franckvalli
Jul 11 2017 03:42
@scottleibrand Thanks a lot Scott! It works now!
Scott Leibrand
@scottleibrand
Jul 11 2017 03:42
:+1:
aliceinnowonderlands
@aliceinnowonderlands
Jul 11 2017 03:43
@danamlewis thanks for advice =) any docs about part with connection android -> rig? i can see here http://openaps.readthedocs.io/en/latest/docs/walkthrough/phase-0/hardware/CGM.html#using-the-dexcom-receiver-cgm only about android -> cloud
however still interested in any advices about what can be wrong with my g5 receiver -> rig connection =) thanks
Scott Leibrand
@scottleibrand
Jul 11 2017 03:47
@aliceinnowonderlands does anything show up when you run lsusb, or does it just say -99?
aliceinnowonderlands
@aliceinnowonderlands
Jul 11 2017 03:49
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Scott Leibrand
@scottleibrand
Jul 11 2017 03:51
what kind of cable are you using to plug in the receiver? looks like it can see the OTG adapter, but not the rig
aliceinnowonderlands
@aliceinnowonderlands
Jul 11 2017 03:52
let me check ebay =)
BestGameSetups Micro USB to Micro USB OTG (On-The-Go) 12" (30cm)
Scott Leibrand
@scottleibrand
Jul 11 2017 03:53
so that's a single male to male cable, without a separate adapter?
does the charging icon light up when you plug it in to the receiver?
and have you tried reversing the cable?
aliceinnowonderlands
@aliceinnowonderlands
Jul 11 2017 03:55
1 - yes, its male-male cable
2 - no, its isnt (but i did full charge it today before connecting to rig)
3 - yes, i tried - when i flip it - lsusb shows me -99 all the time
Scott Leibrand
@scottleibrand
Jul 11 2017 04:17
do you have the rig plugged into USB power over the UART port?
aliceinnowonderlands
@aliceinnowonderlands
Jul 11 2017 04:18
not at the moment
oh, when i do connect it to power over uart - i can see charging icon on reciever
is it a good sign?
Scott Leibrand
@scottleibrand
Jul 11 2017 04:26
you have to power the rig over USB to use the receiver via USB. the 3.7v lipo doesn't have enough voltage to turn on the rig (which requires 5v)
try lsusb again once the charging icon is on
aliceinnowonderlands
@aliceinnowonderlands
Jul 11 2017 04:35
thanks
now it look like this:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 22a3:0047
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
how can i tell if it start getting data from the receiver if i connect it to nightsout account already?
ok good night everyone i'm going to have some sleep and watch my new rig working overnight (works now from xdrip -> cloud -> rig) and will try more tomorrow
thanks for help @scottleibrand =)
Scott Leibrand
@scottleibrand
Jul 11 2017 04:40
@aliceinnowonderlands you can look at the actual ~/myopenaps/monitor/glucose.json file to see where it got its CGM values...
or just turn off the xdrip app on your phone and make sure the rig keeps updating its BG value in pump-loop.log even after NS doesn't have new data any more
katie disimone
@Kdisimone
Jul 11 2017 05:13
leaving this here so it is in Gitter search for others later. If someone has a bad flash that ends up with this error message Device has DFU interface, but has no DFU functional descriptor.…I know the solution. Issue the flash command as usual, and in the rig’s screen window, reboot the board using power button…but quickly into the reboot, press control-D. Then in the boot command line type run do_flash. problem solved. I think the error is caused by flashing without the dfu-util file in the jubilinux folder for Windows flashers…but I’m not sure.
katie disimone
@Kdisimone
Jul 11 2017 05:54
this is where the rig gets stuck before then
[ OK ] Found device /dev/disk/by-partlabel/home. 
[ OK ] Reached target Sound Card. 
Starting Load/Save RF Kill Switch Status of rfkill2... 
Starting File System Check on /dev/disk/by-partlabel/home... 
Starting Network Time Synchronization... 
Starting Update UTMP about System Boot/Shutdown... 
[ OK ] Started Load/Save RF Kill Switch Status of rfkill2. 
[ OK ] Started Network Time Synchronization. 
[ 18.701221] systemd-fsck[156]: /dev/mmcblk0p10: recovering journal [ OK ] Started Update UTMP about System Boot/Shutdown. 
[ 18.718644] systemd-fsck[156]: /dev/mmcblk0p10: Superblock last mount time is in the future. 
[ 18.720964] systemd-fsck[156]: (by less than a day, probably due to the hardware clock being incorrectly set) FIXED. 
[ 18.723190] systemd-fsck[156]: /dev/mmcblk0p10: clean, 11/87120 files, 14181/348155 blocks 
[ OK ] Reached target System Initialization. 
[ OK ] Started File System Check on /dev/disk/by-partlabel/home. Mounting /home... 
[ OK ] Mounted /home. Starting Rescue Shell... 
[ OK ] Started Rescue Shell. 
[ OK ] Reached target Rescue Mode.
So the actual error is 'failed to connect to /192.168.44.208:5000 url: http://<api-secret>@192.168.44.208:500/api/v1/'
Tim Street
@tim2000s
Jul 11 2017 08:44
Which would mean that either there's an issue with xdripaps on the rig, or you're having intermittent Bluetooth dropouts.
Matthias
@ceben80
Jul 11 2017 09:08
@tepidjuice simply xdrip bg monitoring on the rig I am using this here: head -6 ~/myopenaps/xdrip/glucose.json
tepidjuice
@tepidjuice
Jul 11 2017 10:04
Could it be because I have a different name for my rig? i.e. not openaps.
Matthias
@ceben80
Jul 11 2017 10:24
No, but it's always a good idea leaving the default names in terms of troubleshooting
tepidjuice
@tepidjuice
Jul 11 2017 10:35
So any ideas as to what is wrong?
Tim Street
@tim2000s
Jul 11 2017 10:44
Not really. Have you checked whether your SQLite database has received any content?
Matthias
@ceben80
Jul 11 2017 11:19
Or try to ps the xdripaps proc, kill and start it manually to see if your rig is receiving xdrip bg
Marcus Lindfors
@Mackwe
Jul 11 2017 11:24
@SebastienLussier The Orange board looks nice enough, but afaik OpenAPS really likes to have at least 512MB RAM. Please correct me if I'm wrong @scottleibrand @danamlewis .
stefanakerblom
@stefanakerblom
Jul 11 2017 11:45
@mkericson Open the device manager in win. you might se or not something under serial devices. then plug your usb cable connected to the uart port on your explorer board into a usb port on your win machine. you should now see a new serial port. this is the one you want to enter into putty. (in my device manager there is also an "unknown device" - this is probably the edison rig. doesnt matter the comx port is there and works for me). Do you see a green square in your putty window?)
Andy Sharrow
@dramageek
Jul 11 2017 12:33
@aliceinnowonderlands I missed if someone answered it, but the docs for Android(xdrip+) > rig are here: http://openaps.readthedocs.io/en/latest/docs/walkthrough/phase-1/offline-looping-and-monitoring.html?highlight=xdrip#dexcom-cgm-users
Christian Driver
@DriverNightscout
Jul 11 2017 14:31
Hi all, we closed the loop for my daughter for the first time over the weekend, which was really cool to see. Up until now, I've been powering things via the micro USB on the Explorer board, which has been fine up until now as all testing has been done at home. We are now looking to make the rig portable, so I ordered what I thought was the correct battery (https://uk.rs-online.com/mobile/p/lithium-rechargeable-battery-packs/1251266/). It turns out it has a 2.5mm JST connector, not the 2mm one needed by the Explorer board! Could any of the UK-based folks point me in the direction of where you got your batteries from, as I really don't want to buy another one that's the wrong size... Thanks in advance.
John Benjamin
@Bender1061
Jul 11 2017 14:54
Something I think we need is a wish list, someplace that people could put up ideas for features or things we would like. Cause I know we get people who want to contribute to the system, some of them not even T1 or know someone who lives with someone with T1, but they would love to help.. For example something I would love to have, but it's not really up my expertise would be an app on the phone to be able to monitor the loop offline, and add carbs, see what is going on, maybe even have a modified bolus calculator that takes in account the basil IOB. Maybe something similar to the loop app, only talking to the rig over bluetooth.
that just an example of I wish someone would make. But I'm sure others have great concepts, but no time to work on some things. but a list of Ideas or wishlists would help others who want to help, but don't have a clue where to start.
rodzilla55
@rodzilla55
Jul 11 2017 15:29
Day 4 of my OpenAPS system. Good results so far and mostly stable technically (1 hard reboot and 1 minor Wifi issue). Portability is pretty great also. I'm wondering if many / most people invest in the hardware for a 2nd rig to have a backup?
Christian Driver
@DriverNightscout
Jul 11 2017 15:29
Answering my own question, I've found a supply of 2000mah batteries with the right connectors here -> https://www.coolcomponents.co.uk/en/lithium-polymer-battery-2000mah.html
John Benjamin
@Bender1061
Jul 11 2017 15:31
@rodzilla55 a backup rig is always good. Or like myself, I have 4 all around my house, and 3 as backups. at least one of my backups in my bag for work.
katie disimone
@Kdisimone
Jul 11 2017 16:02
@Bender1061 there is a list like that already. Go check out GitHub. https://github.com/openaps/oref0/issues
You can label issues as feature requests
Dana Lewis
@danamlewis
Jul 11 2017 16:31
@Bender1061 +1 for using issues as feature requests, or we could start a wiki page for if. (Also fwiw - app project is getting kicked off here soon to talk Bluetooth to rig)
@rodzilla55 +1 for a backup rig
rodzilla55
@rodzilla55
Jul 11 2017 16:47
@Bender1061 Hmmm... so the comms between multiple rigs and pump is effectively negotiated with more than one rig in range? Do you keep the ones situated throughout your house plugged in?
rodzilla55
@rodzilla55
Jul 11 2017 16:52
thanks @danamlewis
rodzilla55
@rodzilla55
Jul 11 2017 16:59
The "multiple rigs" design is a really awesome part of this overall architecture.
Dana Lewis
@danamlewis
Jul 11 2017 17:00
:+1:
Scott Leibrand
@scottleibrand
Jul 11 2017 17:14
@Bender1061 regarding the OpenAPSApp, the repo is https://github.com/aditmer/OpenAPSApp
cameronrenwick
@cameronrenwick
Jul 11 2017 17:38
Q about max_iob. In the docs it states that a rule of thumb starting point is no greater than 3x my max basal. In autotune, consistently the largest basal value is about 0.52. Now when I watch NS, there are times when my rig will set a temp basal of 1.5-1.75. My pump has a max basal rate set to 2.0. I'm wondering when we use the 3x rule, is that based on what autotune suggests (which I believe is a rate/hr) vs what we'll see in NS? Clearly, if it's NS, my max_iob could be as high as 4.5 (or greater). Currently my max_iob is set to 1.6 . Looking for clarification
Dana Lewis
@danamlewis
Jul 11 2017 17:41
Max iob is an absolute amount, not a rate per hour
It's how much insulin can the rig give you in total number of units
John Benjamin
@Bender1061
Jul 11 2017 17:42
@danamlewis I would think a wiki or something more dedicated to new wanted features would be better than the Issues. I look at issues at more of stuff that is not working or someone that is not understanding (half the stuff I comment on) for stuff that we already have.
Dana Lewis
@danamlewis
Jul 11 2017 17:43
I would not do your maxiob based on the highest temps you allow OpenAPS to set, which is u/hr (rate), because then you'll probably end up double multiplying some of these rules of thumbs
John Benjamin
@Bender1061
Jul 11 2017 17:43
@scottleibrand thanks for the repo, I will check that out!
cameronrenwick
@cameronrenwick
Jul 11 2017 17:47
thx Dana...I understand what you're saying...my question is more if you're saying the 3x your highest basal rate U/hr (as per http://openaps.readthedocs.io/en/latest/docs/walkthrough/phase-3/beyond-low-glucose-suspend.html?highlight=max_iob (that I'm setting in my pump, and that autotune is calculating)) and not the temp basals that I see in NS
Dana Lewis
@danamlewis
Jul 11 2017 17:48
Yes - from pump, not based on calculated temps (which are likely to be up to 3x your basal, per safety multiplier)
Please PR clarifications
cameronrenwick
@cameronrenwick
Jul 11 2017 17:59
thanks and done
Thacher
@thacherT1D
Jul 11 2017 18:30
openAPS up and running -- working in a coffee shop today, wifi network doesn't have a password, I used network = { ssid="network name" psk=""}
no luck... not emergency, on the hotspot, but would be nice to not run on data all day... help! thanks
sdneufer
@sdneufer
Jul 11 2017 18:33
If the network requires you to press an ok or agree button I do not believe you can connect to it.
Thacher
@thacherT1D
Jul 11 2017 18:34
@sdneufer no okay or anything, just open
cameronrenwick
@cameronrenwick
Jul 11 2017 18:36
@thacherT1D I'd try network={ key_mgmt=NONE priority=-999 }
sdneufer
@sdneufer
Jul 11 2017 18:37

If you want to add open networks to your list, then add:

network={
key_mgmt=NONE
priority=-999
}

cameronrenwick
@cameronrenwick
Jul 11 2017 18:38
thx @sdneufer ...I was trying to add your comment with the "code" look and the right line spacing... between us we got it :clap:
sdneufer
@sdneufer
Jul 11 2017 18:42
I was off copying and when i pasted it sent.
Scott Leibrand
@scottleibrand
Jul 11 2017 18:42
@thacherT1D @sdneufer specifying it like that without ssid= will allow it to join any open wifi (even those with captive portals)
sdneufer
@sdneufer
Jul 11 2017 18:42
I am trying to setup one of my 2 edisons. I find the docs confusing in that I am not sure I am on the page to setup dev or master... Currently using mac, have pc also setup, however I was impatient and interrupted the flash, so will have to restart that one.
Scott Leibrand
@scottleibrand
Jul 11 2017 18:42
if you just want to allow specific known really-open networks, you can specify ssid= and key_mgmt=NONE instead of psk=
sdneufer
@sdneufer
Jul 11 2017 18:42
@scottleibrand What is a captive portal?
Dana Lewis
@danamlewis
Jul 11 2017 18:43
@sdneufer you may want to use this DEV DOCS page for quick installing: http://openaps.readthedocs.io/en/dev/docs/Troubleshooting/Rig-NS-communications-troubleshooting.html#mlab-maintenance (but then switch back to the main docs for multiple wifi setup, maxiob, etc.) note that it installs the MASTER BRANCH OF CODE.
(caps meant for clarity, not for yelling :))
sdneufer
@sdneufer
Jul 11 2017 18:44
I am currently running the dev on one edison. i am trying for redundancy to setup two more.
Scott Leibrand
@scottleibrand
Jul 11 2017 18:44
it will prompt you when it's about to start oref0-setup, so if you want dev, you can ctrl-c there and then checkout and install dev
sdneufer
@sdneufer
Jul 11 2017 18:45
ok.. so there is a note in the install page i was reading that said if you want dev click here: https://raw.githubusercontent.com/openaps/docs/master/scripts/quick-src.sh
Andy Sharrow
@dramageek
Jul 11 2017 18:45
@sdneufer A captive portal is a network that you have to click OK on. Usually the OK button is a 'terms and conditions' thing. But until you click it (which the rig can't) it wont let you out to the internet.
Scott Leibrand
@scottleibrand
Jul 11 2017 18:45
@sdneufer no, that's openaps and decocare dev, not oref0 dev
sdneufer
@sdneufer
Jul 11 2017 18:45
so I am copying that into a shell script on the edison and removing the sudo as I am logged in as root. ok... won't do this.
ahh.. hmm...
Thacher
@thacherT1D
Jul 11 2017 18:46
thanks @sdneufer @scottleibrand @cameronrenwick
Scott Leibrand
@scottleibrand
Jul 11 2017 18:46
somewhere else in the docs it tells you how to cd ~/src/oref0 && git checkout dev and then npm run global-install
or you can just do that if you're comfortable with those kinds of commands
Andy Sharrow
@dramageek
Jul 11 2017 18:48
@danamlewis on the M-Lab maintenance note, is wiping everything out now the preferred fix once you fill up the database? I know we've tried to avoid that in the past.
Dana Lewis
@danamlewis
Jul 11 2017 18:49
noooooo
here’s what the dev docs say - i.e. try compressing, etc. and do everything posible before wiping. http://openaps.readthedocs.io/en/dev/docs/Troubleshooting/Rig-NS-communications-troubleshooting.html#mlab-maintenance
and if you HAVE to wipe, donate the data first to the data commons. (Although, let me know if you have already done an upload to OH, then wiped, then are trying to upload again to save - I might need to have anyone do a manual file upload vs. use the tool if that’s the case)
Martin Haeberli
@mhaeberli
Jul 11 2017 18:51
:-) unicorns die when data is thrown away :-)
Dana Lewis
@danamlewis
Jul 11 2017 18:51
+ I cry. Don’t make me cry.
Andy Sharrow
@dramageek
Jul 11 2017 18:51
@danamlewis That's what I was referring to. Once you've filled the data size, not just the size on disk.
Dana Lewis
@danamlewis
Jul 11 2017 18:51
(Joking aside, did the new docs there answer your question @dramageek?)
k
I could use some help updating the NS Data Transfer tool to save old uploads, so that new uploads are a new upload vs overwriting the old one
in case anyone wants to help w/ that, that’ll be the preferred way to save your data + prevent crying before you wipe away.
also, PRs welcome for anyone who’s started to poke around pages like that in the dev docs, for additional clarifications on those kind of pages + elsewhere. Unless it’s a major fix needed for master/regular docs, probably going to start shifting PRs to dev since we’re getting close to having those ready to move over to master.
Andy Sharrow
@dramageek
Jul 11 2017 18:56
@danamlewis The manual solution was more along the lines of what I was looking for. I've been hobbling along just under the limit for a few weeks now, and started playing with the mongo console to see if there were options for compacting.
I'd donated a month or so back, but I know I'd heard that uploading new data replaces your old.
Dana Lewis
@danamlewis
Jul 11 2017 18:57
correct (for now, until we change the uploader)
Andy Sharrow
@dramageek
Jul 11 2017 18:58
K. I did go through and delete all the entries that my phone had made on it's battery status. I didn't figure those were medically or rig relevant. :smile:
sdneufer
@sdneufer
Jul 11 2017 18:59
@scottleibrand That link came from the line below, in the link farther below. Did I miss the note that it was openaps and decocare dev ?? No comments in the script itself.
(Interested in the development repositories? See this shell script.) http://openaps.readthedocs.io/en/latest/docs/walkthrough/phase-2/oref0-setup.html
Dana Lewis
@danamlewis
Jul 11 2017 19:01
@dramageek :D
Scott Leibrand
@scottleibrand
Jul 11 2017 19:05
@sdneufer I just updated that page to clarify
sdneufer
@sdneufer
Jul 11 2017 19:08
@scottleibrand Much clearer. :smile:
sdneufer
@sdneufer
Jul 11 2017 19:18
So... Do I point out stuff that is confusing? Like this phrase in the same doc:
if you’re not using an Explorer board or a Carelink stick, you’ll need to enter the mmeowlink port for TI stick or Explorer board (built in TI stick):
Dana Lewis
@danamlewis
Jul 11 2017 19:18
@sdneufer you could do a PR to clarify with your proposed language that would make it more clear :)
sdneufer
@sdneufer
Jul 11 2017 19:19
I am not sure what that is trying to say, only I am using an Explorer board so I figure it does not apply to me. yet the "or Explorer board" part ... what?
hmm... read it wrong I think. just a sec
Dana Lewis
@danamlewis
Jul 11 2017 19:20
For anyone who didn’t see it last night: we are approaching the release of dev to master (0.5.0 is what this will be), and need some final testers. For those on dev, please pull a fresh dev and re-run setup, and let us know if you see any blockers. Otherwise, please describe your setup and comment in openaps/oref0#424 so we know there are no blockers - it would be nice to test all the setups I’ve described in https://github.com/openaps/oref0/pull/424#issuecomment-312555302, meaning WW pump user; Medtronic CGM user; xdrip user; and both with/without SMB/UAM , etc
Scott Leibrand
@scottleibrand
Jul 11 2017 19:20
@sdneufer I think "or Explorer board (built in TI stick)" just needs to be removed there
Dana Lewis
@danamlewis
Jul 11 2017 19:21
@sdneufer clarified via openaps/docs@f64ee5a (those kinds of places are an example of where it’s been edited in the past, so PRs like that are great for you to make)
sdneufer
@sdneufer
Jul 11 2017 19:29
If I can get over the fear of PR's and screwing things up, I would do them more often and faster.
Dana Lewis
@danamlewis
Jul 11 2017 19:30
you absolutely can’t screw anything up - promise. the PR process means someone will review your edits, and help with formatting if needed
sdneufer
@sdneufer
Jul 11 2017 19:33
When setting up a second edison/explorer, should I move the original out of range? I am about to run the oref0-setup however it will see that I am looping if I do not move it or shut it down.
Dana Lewis
@danamlewis
Jul 11 2017 19:34
nope. it might take it an extra minute or two while it waits for rig1 to finish talking, but that’s all
cameronrenwick
@cameronrenwick
Jul 11 2017 20:16
I went thru the exact same thing 3 weeks ago @sdneufer and it was easy peasy to just have my regular rig running...then when rig 2 came online away it went. Once I saw rig 2 was working solid I did take rig 1 and disconnect the battery. It's so seamless you won't even realize
tepidjuice
@tepidjuice
Jul 11 2017 21:26
Message from head -6 ~/<openapsname>/xdrip/glusose.json is: { "message": "Internal Server Error" }
Marcus Lindfors
@Mackwe
Jul 11 2017 21:28
Q: For some reason, after days of flawless BT tethering, I can't get an IP on my bnep0 interface..? I've removed and re-installed Bluez 5.37 and everything works fine with pairing and connecting the bt-pan. But I can not get an IP. Even changed phone and re-did it. No IP. Help please...
tepidjuice
@tepidjuice
Jul 11 2017 21:29
and the .xDripAPS_data/xDripAPS.db file is empty
@ceben80 @tim2000s
Tim Street
@tim2000s
Jul 11 2017 21:47
Okay. I'd need to go and take another look at mine, but that suggests there's an issue publishing to your rig. First up try removing your rest api link to Nightscout.
tepidjuice
@tepidjuice
Jul 11 2017 21:49
I use mongodb to upload to NS which I've turned off at the moment as I have very unreliable internet access.
John Benjamin
@Bender1061
Jul 11 2017 22:04
@Mackwe for some unknown reason some people had to just re-flash the edison with Jublinux and start over in order to get the tether to work for them.
Marcus Lindfors
@Mackwe
Jul 11 2017 22:13
@Bender1061 No no no... I do NOT want to do that. =( If this can't be fixed in-place, I'll need to WiFi tether it until my backup rig arrives. (Thanks again, @Kdisimone!) And I thought of dd-backup my rig just yesterday. And didn't. =(
John Benjamin
@Bender1061
Jul 11 2017 22:13
Understand that!
Marcus Lindfors
@Mackwe
Jul 11 2017 22:15
There has to be some way to fix it. It least find out what's (not) happening.
katie disimone
@Kdisimone
Jul 11 2017 22:25
@Mackwe if you changed phones did you also rerun the setup script with the new BT mac? Because that gets written into cron...
Marcus Lindfors
@Mackwe
Jul 11 2017 22:26
@Kdisimone Yes. All the way. And it does connect to the phone. (I can see it on the phone) and I get the bnep0 interface on the rig. It just doesn't get an IP address off the phone as it should..
(regardless of phone and even on the one it worked fine on before)
Scott Leibrand
@scottleibrand
Jul 11 2017 22:27
does manually killing dhclient and re-running it help at all?
Marcus Lindfors
@Mackwe
Jul 11 2017 22:27
Nope.
@scottleibrand Tried killing dhclient, tried dhclient -r etc.
katie disimone
@Kdisimone
Jul 11 2017 22:28
@Mackwe double check with service provider that they haven't killed your hotspot?
Marcus Lindfors
@Mackwe
Jul 11 2017 22:28
@Kdisimone Two different providers on the phones..
One is also registered to my wife (her work phone)
Also tried to restart the whole networking daemon. To no avail.
Miiko
@tw_miiko_twitter
Jul 11 2017 22:43
@scottleibrand @danamlewis @all Attention! I discovered a safety bug in Oref0 Dev - Branch! Today because of a slight Hypo with 74 mg / dl, I gave the temporary target BG 120-130 over NS, then terrifyingly showed a TARGET of 0 in Looping, and Temp-basal was accordingly switched to max level. For safety reasons, the target must not be less than 80 mg / dl. If there is a faulty setting, the APS must also be able to detect so a fault risk so that the target is minimized to a minimum value greater than 80 as basic protection such as Max IOB.
Openaps-Bug.png
PieterGit
@PieterGit
Jul 11 2017 22:51
@tw_miiko_twitter : I just did a grep "Target: 0" /var/log/openaps/pump-loop.log* ; zgrep "Target: 0" /var/log/openaps/pump-loop.log*.gz and for me it didn't return any hits. This dev rig is on the checkout of a few weeks ago. Perhaps others could also check if the experience a target: 0. This might also be only a displaying error, but even that should not happen.
Miiko
@tw_miiko_twitter
Jul 11 2017 22:54
@PieterGit But Temp-basal was accordingly switched to max level. Actually must be temp basal suspend
PieterGit
@PieterGit
Jul 11 2017 22:55
can you check settings/temptargets.json
PieterGit
@PieterGit
Jul 11 2017 23:00

@tw_miiko_twitter : The output Target: " + convert_bg(target_bg, profile) is generated here:
https://github.com/openaps/oref0/blob/dev/lib/determine-basal/determine-basal.js#L521

So I think there is the error why target_bg=0 is caused by these lines
https://github.com/openaps/oref0/blob/dev/lib/determine-basal/determine-basal.js#L88-L125

Can you look in your pump-loop if there is a clue?
i wonder if the settings/temptargets.json on the rig is similar to what you requested in NS (120-130), or that it lists a zero there
Miiko
@tw_miiko_twitter
Jul 11 2017 23:08
@PieterGit yes, I see
PieterGit
@PieterGit
Jul 11 2017 23:08
is your min_bg and max_bg available in settings/profile.json
must be going, hope somebody helps fixing this issue
You managed to get the rig in a safe mode? (e.g. turn of pump loop, cancel temp, etc.)
please file an issue for it, and mention it on openaps/oref0#424
Miiko
@tw_miiko_twitter
Jul 11 2017 23:14
yes, min_bg and max_bg is available. settings/temptargets.json shows normal
PieterGit
@PieterGit
Jul 11 2017 23:15
and most important, you're ok? Or still in a hypo?
Miiko
@tw_miiko_twitter
Jul 11 2017 23:15
thanks, i am ok
I have happily noticed immediately, the temp basal illogical on Max
PieterGit
@PieterGit
Jul 11 2017 23:19
ok, i'm out, you could try if initializing var target_bg=100; on line 89, fixes it, so we know its a non-assignment issue
Miiko
@tw_miiko_twitter
Jul 11 2017 23:19
Now look no more other info because I have rig instaliert again.
@PieterGit thank you so much! I try it
PieterGit
@PieterGit
Jul 11 2017 23:20
please check if you still have the pump-loop of the instance avaialble, because it might give a clue
and please log an issue, because it might be a serious defect
i'm out
Miiko
@tw_miiko_twitter
Jul 11 2017 23:21
There is still notice when reinstalled?
Scott Leibrand
@scottleibrand
Jul 11 2017 23:22
can you rephrase that question? I'm not understanding.
Miiko
@tw_miiko_twitter
Jul 11 2017 23:22
Ok
Miiko
@tw_miiko_twitter
Jul 11 2017 23:27
I have increased a Temp Target from 100 - 100 to 120 - 130 via NS, then found in loop so illogical, temp basal increased to max. Level, and Traget in Looping was 0.
Scott Leibrand
@scottleibrand
Jul 11 2017 23:33
is this still happening / reproducible, or did it just occur briefly and then resolve itself?
Miiko
@tw_miiko_twitter
Jul 11 2017 23:39
I can not answer your question. It happened, but I found almost instant temp basal was not supspend, and I let the target reverted to normal 100 again.