These are chat archives for nightscout/intend-to-bolus

20th
Jul 2017
skubesch
@skubesch
Jul 20 2017 02:40
Reading through the mlab troubleshooting instructions to see how to fix my issue of no pump or openaps connection data in NS but my size is under 500. Is the issue possibly somewhere else? Will following the steps to cause me to lose any historical CGM data or treatment entries/notes?
Screen Shot 2017-07-19 at 10.38.31 PM.png
Dana Lewis
@danamlewis
Jul 20 2017 02:49
the issue is likely somewhere else, but trying to compact (won’t hurt anything) will help us narrow it down/confirm if it’s not size of data related.
Scott Leibrand
@scottleibrand
Jul 20 2017 03:59
anyone on here who did a dinner bolus 2-3 hours ago? If so, we've got a potentially important/urgent safety fix we'd like someone else to test before we merge it in: openaps/oref0#555
Scott Leibrand
@scottleibrand
Jul 20 2017 04:23
@/all anyone else want to test this? ^^ @jmcrawford just gave it a :+1: in the issue, and we were able to repro the issue and fix on our rigs, so unless anyone else is ready to test it in the next few minutes, I'll probably go ahead and merge so we can release it tonight

If you're running oref0 0.5.x, please upgrade to 0.5.2 at your earliest convenience. Per #554, oref0 0.5.1 was improperly using pumphistory-zoned.json for IOB calculations instead of pumphistory-merged.json, which resulted in IOB for any given bolus or temp basal event being cut off after 2 hours. As a result, oref0 would have been slightly less likely to low-temp when BG was running low 2-3 hours after a meal, and would stop issuing SMBs after 2 hours if it calculated there was no more COB.

This release fixes that issue by correcting the iob.json report to use pumphistory-merged.json as intended.

Alternatively, if you're comfortable with a hot-fix and don't want re-run oref0-setup right now, you can upgrade and use the sed command at https://github.com/openaps/oref0/pull/555#issuecomment-316589442 to patch your openaps.ini.
Grant
@Bender_Fry_twitter
Jul 20 2017 06:15
Never mind I think it was the adv_target_adjustments setting kicking it to 80.
TinaBerger
@TinaBerger
Jul 20 2017 06:19
@danamlewis We are having the same problem with pump and OpenAPS pill on two newly run script rigs. But the older rig is working fine. If the old rig picks up the OpenAPS pill updates. If the newer rigs pick up from there, only the older rig's info continues to show in the OpenAPS pill as it waits and then turns to unknown. The temp basals show up, so you can tell its temping but you can't see why, or see IOB. We have compacted the mlab with no change.
Dirk Gastaldo
@dirkgastaldo
Jul 20 2017 07:12
For wifi router info in the wpa_supplicant file, if the wifi router has no password (open/free wifi) do I just leave the psk= line out?
I see this: network={
key_mgmt=NONE
priority=-999
}
but I was wondering if I could give it specific open routers, and not have it join any and all open routers it finds
skubesch
@skubesch
Jul 20 2017 08:24
I followed the troubleshooting steps for mLab, but no change in behavior regarding NS showing pump device and OpenAPS statuses. I did discover that a rig previously not working is now (suddenly? yay) and found that while the Edison/Explorer running Jubilinux 0.2.0 and the newest setup script (oref0 0.5.2) does not show the openaps/pump data in NS, the Edison/Explorer running Jubilinux 0.1.1 and oref0 0.4.2 does. I'd prefer running 0.2.0/0.5.2 but also would like to get that data in NS; any other things I could try for a fix?
GrantGam
@GrantGam
Jul 20 2017 08:41

Hi guys,

Trying to source a European (mmol/l) units for building an openAPS rig. There are a few 512 models available for a reasonable price with applicable firmware, has anyone experience of looping with this model of pump? It's my understanding that there are a few functions not available on these pumps and just want to know whether it's even worth bothering with that pump model?

Rachel Sandlain
@audiefile
Jul 20 2017 11:47
@skubesch jubilinux 0.2.0 does not have the ability to test Edison battery level which prevents the status being updated but not treatments. You can prevent the rig from testing that or switch back to jubilinux 0.1.1
cameronrenwick
@cameronrenwick
Jul 20 2017 13:24
@GrantGam I'm not sure if you've seen this page http://openaps.readthedocs.io/en/latest/docs/Build%20Your%20Rig/x12-users.html?highlight=512 but take a look. I am in the same category tho I've got a 522 that I'm currently using. If you can't find another pump I'd get the 512 and keep looking for and x22 or later. The 512 reportedly will work but needs some extra steps and, as of yet, SMB will not work
Diabetic_Dude
@diabetic_dude_twitter
Jul 20 2017 13:32
do you know what I really hate??? When I update all my rigs and feel like everything is running perfect... Wake up in the morning and check my BGs and see that I have been running at a constant 100 all night and come to work and see....... "please update, we found a bug " NOOOOOOOOOO
cameronrenwick
@cameronrenwick
Jul 20 2017 13:38
@diabetic_dude_twitter just think about how you'll be even BETTER once the little bug is fixed... (congrats on 100... well done :clap: )
Diabetic_Dude
@diabetic_dude_twitter
Jul 20 2017 13:39
lol I hope you are correct, one rig done and one to go
the secret words make me angry, I had to re scan the docs to find them again, but I do understand the purpose they are there for, they are needed.
@danamlewis lots of questions there
Mike
@libxmike
Jul 20 2017 13:53
@beached was going to post same link, but I dont recommend to read most of the post there, people are plain stupid and narrow minded simpletons
Darrell Wright
@beached
Jul 20 2017 13:55
Some are just misinformed, scared, or set in their ways. Like how many of us were apprehensive to get pumps before we had them. I was and it was stupid but I didn't want to feel like a cyborg. It is easy to get set in our ways...
on the other hand, im on vaccy and wife/kids are not so when the internet is wrong I have to respond :)
Diabetic_Dude
@diabetic_dude_twitter
Jul 20 2017 13:57
that reddit post. hope it does get scanned.
Darrell Wright
@beached
Jul 20 2017 14:01
what do you mean scanned?
Diabetic_Dude
@diabetic_dude_twitter
Jul 20 2017 14:02
read.... mainly the comments
Colin Lennon
@colinlennon
Jul 20 2017 14:09
@tepidjuice Great news! :smile:
Darrell Wright
@beached
Jul 20 2017 14:21
I'm not allowed to go back to that thread for a while.
Diabetic_Dude
@diabetic_dude_twitter
Jul 20 2017 14:21
I will post anything you want
just let me know
Darrell Wright
@beached
Jul 20 2017 14:22
no no, I am reading too much BS
it's bad for me
Diabetic_Dude
@diabetic_dude_twitter
Jul 20 2017 14:23
I am doing my best not to post for the same reasons I want people like you @scottleibrand petergit and @danamlewis to post educated responses
rodzilla55
@rodzilla55
Jul 20 2017 14:48
Hi All... I am new to the community here... looping for almost 2 weeks now. Trying to understand, and add one feature at a time. In trying to understand Bolus Snooze and the divisor setting, I wrote the following:
Setting a higher number for DIA_bolus_snooze_divisor (like 3, vs default of 2) would result in the snooze calcs being based on shorter DIA (meaning the system thinking insulin being used rapidly and therefore less IOB), so algorithm would more likely think more insulin is needed (more than if divisor was lower)... so a higher DIA_bolus_snooze_divisor means a longer delay before low temping (net effect is likely more total insulin delivery). A lower DIA_bolus_snooze_divisor means a shorter delay before low_temping (resulting in less total insulin delivery, on average).
Is that a correct understanding?
rodzilla55
@rodzilla55
Jul 20 2017 15:07
I am running 0.5.1 and therefore plan to upgrade to 0.5.2 ASAP. But I'm wondering how I would have known if I wasn't monitoring this Gitter channel? Is there a way the community is staying notified of critical issues?
Christian Driver
@DriverNightscout
Jul 20 2017 15:09
@rodzilla55 There was an announcement on the Looped Facebook group yesterday by @scottleibrand (https://www.facebook.com/groups/TheLoopedGroup/)
Scott Leibrand
@scottleibrand
Jul 20 2017 15:15
@rodzilla55 the bolus snooze DIA divisor doesn't affect "real" IOB calculations, just how much is "added back in" to accomplish bolus snooze. So a higher divisor causes that add-back to decay away faster, allowing it to low-temp earlier as bolus snooze wears off faster.
There is an email group for safely critical announcements. Did you sign up per the docs? We didn't post this one there (or to openaps-dev), as it's a fairly minor issue as far as overall safety impact goes, and since we never announced oref0 0.5.x there.
We did post to Looped since it was announced there.
Jennifer Montbach
@jenm999
Jul 20 2017 15:21
@scottleibrand I was just working on trying to understand bolus snooze divisor. I'd like to enable AMA so I can see COB, but since we are using FIASP which is so fast I don't want OpenAPS to push too much insulin up front. Suggestions?
Scott Leibrand
@scottleibrand
Jul 20 2017 15:35
the folks who've used Fiasp with OpenAPS so far have had good success by just reducing their DIA by 1 hour (usually from 4 to 3 hours)
Jennifer Montbach
@jenm999
Jul 20 2017 15:38
I just switched it from 3 to 4 actually. I was having a lot of negative IOB 3-4 hours after eating, that I was unable to address via basal rates or ISF. Making DIA longer and boosting basals slightly has resulted in the flattest lines yet. I feel pretty good about DIA. Just not sure where to set the divisor for AMA
Darrell Wright
@beached
Jul 20 2017 15:45
Are people finding the insulin after 3hrs becomes insignificant?
with Fiasp?
rodzilla55
@rodzilla55
Jul 20 2017 15:45
@DriverNightscout Thanks for FB tip. I'll join.
@scottleibrand Thanks for the bolus snooze info and I did sign up per the docs.
Jennifer Montbach
@jenm999
Jul 20 2017 15:46
@beached Most of the impact is in the first half hour but it does keep going for a long time. 3h is too short for us
(10 year old kid who does not prebolus)
Darrell Wright
@beached
Jul 20 2017 15:52
I have issues with the long tail becoming very significant when I exercise(I'm stable around 1/6 ->1/10 my normal active insulin). So something that reduces that tail would mean I could plan less and run sooner. Currently I try for 4.5-5hrs from bolus and 2+hrs of temp basal
so i might buy a vial and give it a go
rodzilla55
@rodzilla55
Jul 20 2017 15:55
Anyone able to get Fiasp in the US? via Canadian Online Pharmacy or otherwise?
Darrell Wright
@beached
Jul 20 2017 15:57
Frig, the price you guys pay. Fly to Canada, stop at pharmacy, buy it OTC, and fly home. save money
Jennifer Montbach
@jenm999
Jul 20 2017 15:59
I'm driving to Montreal from Boston this weekend to get more, and donating my Humalog. It's soooooo much better for my kid and the way he eats. Has been lifechanging for us. If you are within a gas tank of Canada I'd just drive. Otherwise see if you have a friend who can purchase and ship cold.
Darrell Wright
@beached
Jul 20 2017 16:01
Montreal is far away, but a beautiful city. Fun place too.
rodzilla55
@rodzilla55
Jul 20 2017 16:01
I'm new to this topic (Fiasp and buying from Canada)... so you can just buy it OTC? Roughly how much?
Darrell Wright
@beached
Jul 20 2017 16:04
36 CDN
about 25 USD
In Ontario at least
rodzilla55
@rodzilla55
Jul 20 2017 16:05
@beached THANKS
Darrell Wright
@beached
Jul 20 2017 16:08
US Diabetics need to be out protesting, calling representatives, making the price a political issue. Plus if you guys drop your price ours can go down as it's about the median price of a bunch of countries
Ryan Dalisky
@rdalisky
Jul 20 2017 16:30
Online Canadian pharmacy quoted me $60 a vial for FiAsp. I should just cross the bridge, Windsor has to have a pharmacy right?
Darrell Wright
@beached
Jul 20 2017 16:32
Nope, only Pharmacies in Toronto, Vancouver, and Montreal. :p Yeah, Shoppers are like the starbucks of pharmacies
Just looked 1253 Shoppers Drug Mart's in Canada.
Ryan Dalisky
@rdalisky
Jul 20 2017 16:33
Haha only the non-3rd world parts 🤣
Darrell Wright
@beached
Jul 20 2017 16:34
There are <8000 Starbucks in the US, so that isn't too bad. Actually more popular accounting for population
Yeah. I was in Sioux Lookout for work once and their only pharmacy closed at 6pm and I forgot my long acting at home. had to check in to hospital to get a shit
shot
Ryan Dalisky
@rdalisky
Jul 20 2017 16:36
Still need a prescription I'm assuming? And would a US doc be able to write for it?
Happened to me in Mexico once, but that can be purchased without a prescription there.
Darrell Wright
@beached
Jul 20 2017 16:36
no
rodzilla55
@rodzilla55
Jul 20 2017 16:36
@rdalisky which online pharmacy?
Ryan Dalisky
@rdalisky
Jul 20 2017 16:36
No script needed?
Darrell Wright
@beached
Jul 20 2017 16:37
Insulin is OTC in Canada. Prescription is barely needed for insurance to pay
Darrell Wright
@beached
Jul 20 2017 16:38
I walk in, say Hello, I would please like a box of NovoRapid eh. The pharmasist tech gets it and I politely ask for a written receipt and the pharmacist signs it and I pay.
There might be some How aboot that weather eh too
OK, I'm done with the stereotypes. But it is that easy. Oh and often there are 24hr locations close enough
Ryan Dalisky
@rdalisky
Jul 20 2017 16:39
That's awesome! And my mother was born in BC, technically I am half Canadian and can get citizenship!
Darrell Wright
@beached
Jul 20 2017 16:39
My buddy is half and it's nice for working wherever
Ryan Dalisky
@rdalisky
Jul 20 2017 16:40
And how about some labat and some hockey, 'eh? And Trailer Park Boys, Canada is awesome haha!
Darrell Wright
@beached
Jul 20 2017 16:41
Yeah, but I cannot get GoT online for a couple months after it's done, legally. Not worth it....
cameronrenwick
@cameronrenwick
Jul 20 2017 16:45
@jenm999 @beached I too have changed my DIA for fiasp to 3 hours. I don't find that I'm stacking insulin with it at this setting and the tail of the insulin DIA is pretty similar to novo rapid I believe. The biggest thing I find is, when I bolus for a meal, I bolus right before eating. At a restaurant for example, I bolus when the food is put in front of me. I don't know about others but that seems to be the best for me personally. This is going to be one of those YDMV things
Darrell Wright
@beached
Jul 20 2017 16:50
thanks
over 10k pts on that reddit post. lots of eyes
rodzilla55
@rodzilla55
Jul 20 2017 16:55
@rdalisky when I look at website, and call https://www.canadapharmacyonline.com/m/default_m.aspx... they say they don't carry any form of insulin. I can't seem to find a site that does.
Dana Lewis
@danamlewis
Jul 20 2017 16:56
@beached thx for making sure we heaed about it. (@scottleibrand is on comment duty)
Darrell Wright
@beached
Jul 20 2017 17:02
I see that now
Dana Lewis
@danamlewis
Jul 20 2017 17:06
I'm not reading but hear you are too. Thx to you & everyone for contributing knowledge to the thread.
Diabetic_Dude
@diabetic_dude_twitter
Jul 20 2017 17:07
people there make me a bit upset
Darrell Wright
@beached
Jul 20 2017 17:07
Seems like a good opportunity for Scott to clear up some misconceptions.
He definitely speaks with more authority than I am able to
cameronrenwick
@cameronrenwick
Jul 20 2017 17:15
I'm in both politics and healthcare... 2 deadly combination :smile: my rule... don't feed the trolls.... (there are some people you just won't ever reach... )
Diabetic_Dude
@diabetic_dude_twitter
Jul 20 2017 17:16
that is too true... ... I need to remember that
Darrell Wright
@beached
Jul 20 2017 17:16
That's the insiduous trap isn't it. It is fun to feed trolls sometimes. Assuming historical trolling(like from a boat) and not mean people
Dana Lewis
@danamlewis
Jul 20 2017 17:16
Reposting for anyone who didn't see last night: if you're on 0.5.x, please update to 0.5.2 when you get a chance. https://github.com/openaps/oref0/releases/tag/v0.5.2
To upgrade to oref0 0.5.2 you'll use the normal method from the docs: http://openaps.readthedocs.io/en/latest/docs/Customize-Iterate/update-your-rig.html to update the software, and then http://openaps.readthedocs.io/en/latest/docs/Customize-Iterate/oref0-runagain.html to run oref0-runagain.
@audiefile @dramageek has anyone tested oref0 0.5.2 with jubilinux 0.1.1 to see if that resolves the issue!
Dana Lewis
@danamlewis
Jul 20 2017 17:21
I'm on a roll with typos. That was a ? :)
Scott Leibrand
@scottleibrand
Jul 20 2017 17:44
@beached there is an ongoing effort to update oref0 to support an exponential insulin activity curve that better matches Fiasp's instead of the current bi-linear one.
francesc0-cgm
@francesc0-cgm
Jul 20 2017 17:45
@scottleibrand please gimme an android gui to bolus from :smile: :smile: :smile:
RedCyclist1
@RedCyclist1
Jul 20 2017 17:45
@scottleibrand @danamlewis Hey you two... Thanks forthe update. Save for a connectivity glitch, I would have been 100% in range for 24 hours... NO complaints, I will take the 90% LOL
Darrell Wright
@beached
Jul 20 2017 17:45
Are the curves from the clamp tests in the research paper that came with Fiasp close?
to what people are experiencing I mena.
mean
Dana Lewis
@danamlewis
Jul 20 2017 17:46
@francesc0-cgm ;) work commencing on app stuff
Dana Lewis
@danamlewis
Jul 20 2017 17:52
@RedCyclist1 well done :smile:
RedCyclist1
@RedCyclist1
Jul 20 2017 17:54
@scottleibrand Let me know if you need any support on reddit, happy to jump on and share my success!
Scott Leibrand
@scottleibrand
Jul 20 2017 17:57
Please do.
@beached yeah, seem to be. Lots of work from the Loop folks recently too on integrating those curves there.
There are Github issues if you want to read more.
francesc0-cgm
@francesc0-cgm
Jul 20 2017 18:06
@danamlewis awesome...because with kids that are often followed by caregivers it is a life changer
If you need an alpha tester i'm here :smile:
Dana Lewis
@danamlewis
Jul 20 2017 18:09
Not anywhere close yet ;) but know it's a need
Scott Leibrand
@scottleibrand
Jul 20 2017 18:11
Also, if anyone goes and reads the Reddit comments, please also log in and upvote the good ones (and optionally downvote the really bad ones). Even a few votes are enough to get a comment displayed or hidden for subsequent viewers.
dan lightner
@danimaniac
Jul 20 2017 18:13

@RedCyclist1 @danamlewis @scottleibrand I don't really understand the whole Reddit thing, but here are several of us OpenAPS'ers with unquestionable success. July 11: 111 mg/dl average / 5.5 est. A1c / 95% in target (70-150). July 13: 109 mg/dl average 5.4 est A1c / 94% in target (70-150). July 14: 104 mg/dl average / est 5.3 est A1c / 100% in target (70-150) and July 18: 100 mg/dl average / 5.1 Est A1c / 98% in target (70-150). Photo proof: https://photos.app.goo.gl/jZkzhvUEhNc9jiYh2

Edit: that's a shareable public link if anybody wants to illustrate a successful 24 hour period.

Darrell Wright
@beached
Jul 20 2017 18:13
I may have missed, but even the bad ones I have seen are more just misconceptions or that is different from what I do.
Dana Lewis
@danamlewis
Jul 20 2017 18:14
@danimaniac congrats on your success! :smile:
Scott Leibrand
@scottleibrand
Jul 20 2017 18:19
@beached yeah, there were a few bad ones, but most had already been downvoted and required some extra clicking to even see them. More important to upvote the better comments I think.
Darrell Wright
@beached
Jul 20 2017 18:19
it seems the biggest misconception is that one cannot raise glucose without glucogon(without eating of course)
they forget less insulin
Rachel Sandlain
@audiefile
Jul 20 2017 18:28
@danamlewis working on testing 0.1.1 jubilinux with 0.5.2 oref0. Work got busy so I actually have to do my job...
Dana Lewis
@danamlewis
Jul 20 2017 18:31
Heh understand how that goes. Thanks for letting us know how it goes.
Darrell Wright
@beached
Jul 20 2017 18:35
Funny, no vials. That's a pain
Dana Lewis
@danamlewis
Jul 20 2017 18:36
Fiasp does come in vials too
Darrell Wright
@beached
Jul 20 2017 18:39
It does
I just meant on de
I wonder how much their business took a hit when medtronic started being the exlusive enlite seller and dex in Canada too
PieterGit
@PieterGit
Jul 20 2017 19:25
@diabetic_dude_twitter : thanks for putting me on par with @scottleibrand and @danamlewis for creating educated responses on the reddit story. I added some comments in the https://www.reddit.com/r/Futurology/comments/6ofgmm/how_one_woman_built_her_own_artificial_pancreas/?limit=500 . I agree with Scott that upvoting and replying to plain errors is something we can easily do. Please don't hesitate and think others can do better. I see a lot of misconception about diabetes there.
Scott Leibrand
@scottleibrand
Jul 20 2017 19:32
:+1:
Diabetic_Dude
@diabetic_dude_twitter
Jul 20 2017 19:39
yup, been doing that for most of the day
Cameron Chunn
@applehat
Jul 20 2017 20:16
Man
There are a LOT of interesting comments.
=P
rodzilla55
@rodzilla55
Jul 20 2017 20:24
@rdalisky thanks
skubesch
@skubesch
Jul 20 2017 21:15
I get the feeling that a lot of the commenters don't get how difficult manual dosing is in the first place. The stuff I scrolled through was super frustrating to read. ...but seeing that this is on reddit explains why friends have been sending links to Dana's article today!
Dana Lewis
@danamlewis
Jul 20 2017 21:16
heh sorry :)
skubesch
@skubesch
Jul 20 2017 21:16
@audiefile Thank you, that explains the issue. Back to reflashing rigs to 0.1.1 then!
Shawn
@dyjaks
Jul 20 2017 21:18
@rodzilla55: have you ordered from them before? DO you need a friend in Canada for a shipping address?
Scott Leibrand
@scottleibrand
Jul 20 2017 21:34
@skubesch please confirm in the github issue if reflashing 0.1.1 fixes the issue. if so, we should be able to work around it in software so not everyone has to reflash (unless they want battery level readings to work)
skubesch
@skubesch
Jul 20 2017 21:38
I'm reflashing one rig now and will run the newest setup script to be sure that's the only difference. Is there a github issue link to post an update there?
Dana Lewis
@danamlewis
Jul 20 2017 21:38
yup, openaps/oref0#553
Diabetic_Dude
@diabetic_dude_twitter
Jul 20 2017 21:38
with all the latest updates is it safe to show IOB on our NS site ?
Dana Lewis
@danamlewis
Jul 20 2017 21:39
@diabetic_dude_twitter the rule of thumb is - best place for iob is logs or the OpenAPS pill. IOB pill should be fine, but sometimes can be slightly delayed and if you have uploading issues, obviously wouldn’t be correct
Diabetic_Dude
@diabetic_dude_twitter
Jul 20 2017 21:41
thanks
Scott Leibrand
@scottleibrand
Jul 20 2017 21:47
it's still best to leave the COB pill disabled, though.
Diabetic_Dude
@diabetic_dude_twitter
Jul 20 2017 21:48
yup just need to modify my routine a bit and not only check my openaps pill when I am having problems
Darrell Wright
@beached
Jul 20 2017 22:03
That's interesting. At least in Canada, Fiasp isn't approved for pumping.
Scott Leibrand
@scottleibrand
Jul 20 2017 22:06
Rachel Sandlain
@audiefile
Jul 20 2017 22:13
It hasn't been running long @danamlewis but so far so good with jubilinux 0.1.1 and oref0 5.2
Scott Leibrand
@scottleibrand
Jul 20 2017 22:15
:+1:
skubesch
@skubesch
Jul 20 2017 22:17
@dyjaks There was a post in the Looped group on FB linking ways to get a Canadian address for forwarding mail
Shawn
@dyjaks
Jul 20 2017 22:38
Sounds good.
cameronrenwick
@cameronrenwick
Jul 20 2017 22:59
@beached well.. I'm in Canada... (just a wee bit south of you @beached in Muskoka) and I'm pumping fiasp. My endo who is very forward thinking said no prob. He's also in full support of looping so I'm not surprised. I asked him about the whole "approval" thing and he said sometimes drugs aren't applied to be used in certain situations (fiasp on a pump he then suggested).. so it doesn't mean it's not right; the drug co just didn't make the effort to apply. Regardless, fiasp works great in a pump.. (tho I know I don't need to tell y'all that :+1: _
Darrell Wright
@beached
Jul 20 2017 23:01
I understand that, just that I figured it was
cameronrenwick
@cameronrenwick
Jul 20 2017 23:04
if you've got an open relationship w your endo I'd be pushing for fiasp. I can send you screenshots of how my loop is working w fiasp if it helps. Novo rapid was good but fiasp really works well IMO
Jennifer Montbach
@jenm999
Jul 20 2017 23:19
@beached @cameronrenwick Fiasp is approved for pumping in EU
cameronrenwick
@cameronrenwick
Jul 20 2017 23:23
thx @jenm999 ... and yep, that was part of my discussion when I approached my endo to say lemme change from novo rapid to fiasp
jamespaulley
@jamespaulley
Jul 20 2017 23:23
Are there any negatives to fiasp? Does it affect your heart?
cameronrenwick
@cameronrenwick
Jul 20 2017 23:24
as of yet I can't see any -ve side to fiasp. As for my heart, do you mean noticeable +/- rate or something? not too sure about your question