These are chat archives for nightscout/intend-to-bolus

8th
Sep 2017
Martin Haeberli
@mhaeberli
Sep 08 2017 00:03
https://techcrunch.com/2017/09/07/fitbit-is-teaming-up-with-dexcom-for-glucose-monitoring-on-the-ionic-smartwatch ... would welcome comments on this one, I think, because I think they have some key facts wrong ...
JELCRAWFORD
@JELCRAWFORD
Sep 08 2017 04:59
@bdr1177 - we have found that a longer DIA can soften the ups and downs. As well, a prebolus, waiting till our son's bg starts to drop before starting eating also helped (though not so much with Fiasp). Last but not least, using eating soon or exercising soon to encourage bg in the desired direction is also helpful. Sometimes we also need painkillers for the adults due to the knashing of teeth and head banging that results from the sheer frustration of trying so hard to get less than stellar results :). Our best solution for that had been Openaps!
dan lightner
@danimaniac
Sep 08 2017 12:32
@mhaeberli I agree that TechCrunch got a few things wrong, but I think they were trying to explain a few details that the official press release omitted. I don't think TechCrunch understands what a sensor is ($900 sensor?) or what they actually do (monitor vitals). Kudos for recognizing this is long overdue and providing the coverage...albeit slightly wrong. Here is the actual press release from FitBit: https://investor.fitbit.com/press/press-releases/press-release-details/2017/Fitbit-and-Dexcom-to-Develop-Continuous-Glucose-Monitoring-CGM-Experience-for-People-Living-with-Diabetes/default.aspx
Brian Rabinovitz
@bdr1177
Sep 08 2017 14:05
@JELCRAWFORD Thanks for the ideas and :+1: on the gnashing of teeth and head banging. Just when I think I've got something figured out, bg does the exact opposite of what I expect. :smile:
cameronrenwick
@cameronrenwick
Sep 08 2017 14:18
A couple of months ago I had to deliver a big presentation to a large group of people. I was well prepared and polished so no "worry" there but ~10 min before the presentation was to start we had a huge tech issue. My BG went from 7.2 to about 11, and I hadn't eaten or drank anything... total fight or flight response. I was super surprised how much a jump occurred. So, I can't help but wonder when children are going about their lives that events of this nature (their version...) happen.. and could leave a parent with real questions as to what changed... up until that event for me I'd heard of similar spikes but not had them.. anyway a further 2 cents and proof that YDMV...
Brian Rabinovitz
@bdr1177
Sep 08 2017 15:08
@cameronrenwick Similarly, our experience is that our daughter's bg runs very high the first week or so of a new school year. I think it is the excitement/stress of facing something new and unknown after the summer break. It's understandable, but it sure does make it hard to train the new school staff each year.
dan lightner
@danimaniac
Sep 08 2017 15:08
I am looking for a clear and concise definition/description of UAM to include in a document I am creating. I don't really see one in the docs or the history of UAM development. Off the top of my head: "detects unannounced carb intake / absorption (eat and forget to enter carbs, etc.)."
David
@davidkeddydb
Sep 08 2017 15:14
@danimaniac You can find something in here for sure: openaps/oref0#297
Scott Leibrand
@scottleibrand
Sep 08 2017 15:15
Allows appropriate dosing for unannounced meals (those without a carb estimate). Slightly misnamed, as it (currently) still requires a manual bolus or an eating soon mode to enable it (and SMBs). Perhaps more useful as an adjunct to carb estimates, allowing oref1 to properly dose for carb mis-estimates if BG starts rising faster or slower than expected.
dan lightner
@danimaniac
Sep 08 2017 16:31
Those of you who previously worried or were nervous about explaining OpenAPS to your endo's office...Please read and comment. I have my first post-OpenAPS appointment next week and want to send their office an email prior. Are there any glaring omissions or inaccuracies in the my write-up? I tried not to get too technical or too deep. He and I can talk more in depth in person. Here's my doc: https://drive.google.com/open?id=0B0QpwN3Dz-E2YXUyQlFCZWpxcTA
Scott Leibrand
@scottleibrand
Sep 08 2017 16:38
Awesome! Very well written, and quite accurate. :clap:
cameronrenwick
@cameronrenwick
Sep 08 2017 16:44
@danimaniac great write up; I agree with Scott. The one comment I'll make is, perhaps address what happens when the rig stops functioning (battery dies, out of wifi/BT). I had much the same convo with my endo as you did but his bit ...oh but... regarded when/if the rig stops. I simply stated that if or when the rig is turned off for whatever reason, ... well, then I'm back to the pump that you've given me and, it functions exactly the way it's expected to. I actually saw an .. aaha moment on my endo's face when I said this... Ultimately any physician is concerned most for safety. This little point lead to my endo saying.. aah.. gotcha.. carry on.
fwiw, my 2 cents and please, report back on your visit!
JELCRAWFORD
@JELCRAWFORD
Sep 08 2017 16:45
@bdr1177 - yes, first week of school sucks. We had a known breakfast on day one that produced BG's in the range of 16 (288) on day 1 of school. Repeat of same breakfast on day 3 produced a bg which rose up to 10 (180) but then dropped nicely to the 6's(108) range (no other changes made by us, whatever internal state changes happened, we can only guess).....Even before diabetes I was not fond of roller coasters... :)
sdneufer
@sdneufer
Sep 08 2017 16:47
@danimaniac Well written. Same comment as Cameron. My team asked first off what happens if it stops running. I also like having a lab A1C that I know before my appointment. Docs seem to like lab numbers more than DIY A1C numbers so it helps to have both at hand.
Martin Haeberli
@mhaeberli
Sep 08 2017 17:04
@danimaniac :+1: re TechCrunch comments ...
Martin Haeberli
@mhaeberli
Sep 08 2017 17:11
one more point re Fitbit - would be VERY nice if we can figure out how to reach out to them to bring activity data easily into openaps via Bluetooth. (For that matter, same w Apple Watch)
Maybe Nate Rackyleft can help with that?
Dana Lewis
@danamlewis
Sep 08 2017 17:19
@danimaniac nicely written :) <3 :confetti_ball: (and love showing the visualizations at the bottom)
ejoe132
@ejoe132
Sep 08 2017 17:28
Ive got a quick question, seems I may have something not right in my pump settings, after a meal openaps will low temp me to zero and the three predicitions will all show dropping to zero. But after the meal immediately blood sugar will be still good say 120 within half an hour I will be rising and at 160 and still have a temp basal of zero. Any tips? Is this an openaps setting I have wrong or something in my bolus wizard I dont have tuned for me correctly?
thinking its an issue with my cob settings as thats what reads the lowest
David
@davidkeddydb
Sep 08 2017 17:35
So I am trying to get 0.6.0-dev onto my rig. I know the install isn't happening correctly as I should have a different preferences.json file showing up right? Is there a command I can enter to confirm that I have installed 0.6.0-dev onto the rig? I had 5.3dev on prior
Scott Leibrand
@scottleibrand
Sep 08 2017 17:38
@ejoe132 I would run the math manually on your eventualBG, given your IOB, COB, ISF, and CSF (ISF/CR), and confirm whether it's way too low as oref0 seems to think
@davidkeddydb I don't think it will override your current preferences.json if you have one. you could rename your ~/myopenaps directory to get it to start from scratch
David
@davidkeddydb
Sep 08 2017 17:42
@scottleibrand On 6.0 the preferences.json file has the exponential curve choices right? I can do that with the file.
Diabetic_Dude
@diabetic_dude_twitter
Sep 08 2017 17:43
hmmm mine did not have those choices
Scott Leibrand
@scottleibrand
Sep 08 2017 17:44
in 0.6.0 the preferences.json doesn't have non-standard stuff included by default: you have to add it if you want it.
Diabetic_Dude
@diabetic_dude_twitter
Sep 08 2017 17:44
how? (sorry to butt in )
if it is quick otherwise I can wait for the official manual to come out
Scott Leibrand
@scottleibrand
Sep 08 2017 17:45
just edit the file and add it. if you don't know what to add, read the code (start with the diff in the PR, probably)
David
@davidkeddydb
Sep 08 2017 17:47
@scottleibrand I get it. I was looking at what @tim2000s had in his comments, I actually have been trying to keep up with all of it, and he posted his preferences.json file. He manually did that. Ok. So you have to go into the code and specify the curve, well at least at this point.
ejoe132
@ejoe132
Sep 08 2017 17:47
@scottleibrand so my eventual bg comes out to 108, which is within target, but Im still rising to almost 180 now, would a solution be to just pre bolus better? system runs great except when Im eating, method is I do eating soon half hour ahead then bolus about 5-10min before eating
Scott Leibrand
@scottleibrand
Sep 08 2017 17:47
@davidkeddydb going into the code is just to figure out what the preference you want looks like, until someone adds it to the docs. you don't have to modify anything in the code.
@ejoe132 does the purple line / pump-loop.log show the COBpredBGs getting back up to about 108?
David
@davidkeddydb
Sep 08 2017 17:49
@scottleibrand Don't you have to modify to select what curve you want: The code now supports three new configuration variables in preferences.json:
curve, with legal values of blank, "bilinear", "rapid-acting" and "ultra-rapid"
    If left blank or set to "bilinear", OpenAPS uses the old insulin activity mode
Scott Leibrand
@scottleibrand
Sep 08 2017 17:50
yes, but you do that in preferences.json, not in the code
David
@davidkeddydb
Sep 08 2017 17:51
@scottleibrand I am sorry I am being so dense. I can literally just edit/add the preferences.json file with the curve selection and it will work?
Scott Leibrand
@scottleibrand
Sep 08 2017 17:51
correct
Diabetic_Dude
@diabetic_dude_twitter
Sep 08 2017 17:52
"curve": ultra-rapid
is what I would assume
David
@davidkeddydb
Sep 08 2017 17:52
I was imagining my late nights with the .js files. FANTASTIC
sdneufer
@sdneufer
Sep 08 2017 17:52
I am looping, however the pump pill and openaps pills in nightscout are undefined and unknown. I have updated and restarted everything I can think of and I can't get the pills to populate. What am I missing? Running edison/explorer (3 actually). dev version. Pump shows the temp running. nightscout display shows the treatments and basals. pills just blank. I see this has happened to others however I do not see the solution. What have I missed?
Scott Leibrand
@scottleibrand
Sep 08 2017 17:52
@diabetic_dude_twitter see the PR for notes on the quote format required in .json files (or just copy the way other preferences do it)
Dana Lewis
@danamlewis
Sep 08 2017 17:52
it's a hard life being a bleeding edge early adopter who doesn't want to wait for something to have docs/get in dev ;) ;p
David
@davidkeddydb
Sep 08 2017 17:52
@diabetic_dude_twitter I am still on Humalog at the moment so I am going to stick with rapid-acting until I get FIASP
ejoe132
@ejoe132
Sep 08 2017 17:53
@scottleibrand Yes, it is showing correctly. So it is doing the math correctly then
Dana Lewis
@danamlewis
Sep 08 2017 17:53
TOP ISSUE - OpenAPS pill in Nightscout is “unknown” but it’s looping fine.
Three reasons why: 1) future data in NS; 2) mlab size too big; 3) an issue with jubilinux 0.2.0
How to resolve: follow these troubleshooting instructions (http://openaps.readthedocs.io/en/latest/docs/Troubleshooting/Rig-NS-communications-troubleshooting.html) to check #1 and #2; if those are not the cause, you’re probably on jubilinux 0.2.0 and need the fix that’s in oref0’s dev branch. Feel free to upgrade to dev; it’s about to be released to master later this week.
Scott Leibrand
@scottleibrand
Sep 08 2017 17:53
@ejoe132 if COBpredBG ends up above target and snoozeBG hasn't decayed yet (it's within an hour or so of the bolus time) then oref0 should do SMB bolus snooze and run a neutral temp
ejoe132
@ejoe132
Sep 08 2017 17:55
@scottleibrand ok, i got to about 1.5hrs after my meal bolus and its started smb with a zero temp then it has started bringing up the temp slowly
sdneufer
@sdneufer
Sep 08 2017 17:56
no future data. mlab small.
npm list -g oref0
/usr/local/lib
└── oref0@0.6.0-dev -> /root/src/oref0
Diabetic_Dude
@diabetic_dude_twitter
Sep 08 2017 17:59
@scottleibrand can you send me a link to the PR notes? I am sure I got it right but want to make sure and learn
David
@davidkeddydb
Sep 08 2017 17:59
@scottleibrand Thanks. I changed preferences and we will see how it goes:
"max_iob": 7,
"max_daily_safety_multiplier": 4,
"current_basal_safety_multiplier": 5,
"autosens_max": 1.2,
"autosens_min": 0.7,
"rewind_resets_autosens": true,
"adv_target_adjustments": true,
"unsuspend_if_no_temp": false,
"enableSMB_with_bolus": true,
"enableSMB_with_COB": true,
"enableSMB_with_temptarget": true,
"enableUAM": true
"curve": "rapid-acting",
"useCustomPeakTime": false,
"insulinPeakTime": 75
Scott Leibrand
@scottleibrand
Sep 08 2017 18:00
those last two don't really go together
won't break anything, just the last one is redundant with false
David
@davidkeddydb
Sep 08 2017 18:02
gotcha
sdneufer
@sdneufer
Sep 08 2017 18:06
@danamlewis I have really looked through everything. I was on 0.5.3 dev ; figured I would try installed even more current dev to see if that would fix it. So 2 edisons still on 0.5.3 and the one I am close to on 0.6.0
Scott Leibrand
@scottleibrand
Sep 08 2017 18:06
is this a problem just with this rig, or with all of them?
sdneufer
@sdneufer
Sep 08 2017 18:15
@scottleibrand shutdown the one I upgraded, and one of the other 2 is offline (power off) so checking 3rd rig running 0.5.3 and it is not showing the pills either. The one I upgraded to 0.6.0 does not show them when it is looping. So 2 of the 3 edisons are definitely not displaying the pills. I get pushover updates from the one that is running and the pump updates and the nightscout site shows the treatments. It is just the status pills that are not displaying
Scott Leibrand
@scottleibrand
Sep 08 2017 18:16
do you have tokenauth enabled on your NS?
you might have your API secret wrong...
sdneufer
@sdneufer
Sep 08 2017 18:19
hmm... This all started yesterday morning. ie... I woke up to no pills (they were there when I went to bed). All else ok. So at one point yesterday I did add token auth to one of the rigs. I did not change the api secret though, just added the role for the one rig. Also, as noted it was not displaying before I did that and currently the token rig is shutdown.
Scott Leibrand
@scottleibrand
Sep 08 2017 18:20
sounds like the typical symptoms of the devicestatus collection size on disk issue Dana linked earlier. how big is that?
sdneufer
@sdneufer
Sep 08 2017 18:22
devicestatus says it is 15.97k
Scott Leibrand
@scottleibrand
Sep 08 2017 18:23
not sure then.
you might need to drill down into the exact curls it's running and try them manually to figure out why they're failing
sdneufer
@sdneufer
Sep 08 2017 18:25
Guess that is my Friday night date. hah.. going curling..
cameronrenwick
@cameronrenwick
Sep 08 2017 18:41
ultra-rapid I'm taking to be the fiasp curve correct?
Scott Leibrand
@scottleibrand
Sep 08 2017 18:41
correct
cameronrenwick
@cameronrenwick
Sep 08 2017 18:42
ooh.. so exciting :sparkles:
Diabetic_Dude
@diabetic_dude_twitter
Sep 08 2017 18:42
and is there a typical curve set for the ultra-rapid?
unlike one for the others
Scott Leibrand
@scottleibrand
Sep 08 2017 18:43
@diabetic_dude_twitter all oref0 PRs are at https://github.com/openaps/oref0/pulls - the 0.6.0-dev one is openaps/oref0#592
not sure what you mean by a "typical curve set"
also, openaps/oref0#592 has a link to openaps/oref0#568
Diabetic_Dude
@diabetic_dude_twitter
Sep 08 2017 18:43
a default
Scott Leibrand
@scottleibrand
Sep 08 2017 18:44
not sure I understand your question, but it's probably answered there
Diabetic_Dude
@diabetic_dude_twitter
Sep 08 2017 18:44
geez thanks I have been searching my email for answers and getting mad because I deleted stuff
thanks
is there a default peak time for Ultra rapid, rapid and normal insulin?
or one default peak time for all of them ?
David
@davidkeddydb
Sep 08 2017 18:46
@scottleibrand This just starting running to get going so maybe all of this will resolve itself. Checking pump clock: "2017-09-08T14:43:25-04:00" is within 1m of current time: Fri Sep 8 14:43:25 EDT 2017
and that pumphistory is less than 1m old. Temp refresh at Module.load (module.js:356:32)
ed
Could not parse input data: [SyntaxError: /root/myopenaps/monitor/iob.json: Unexpected end of input]
Traceback (most recent call last):
File "/usr/local/bin/openaps-report", line 82, in <module>
app( )
File "/root/src/openaps/openaps/cli/init.py", line 51, in call
self.run(self.args)
File "/usr/local/bin/openaps-report", line 75, in run
output = app(args, self)
File "/root/src/openaps/openaps/cli/subcommand.py", line 52, in call
return self.method.main(args, app)
File "/root/src/openaps/openaps/reports/invoke.py", line 48, in main
reporters.Reporter(report, device, task)(output)
File "/root/src/openaps/openaps/reports/reporters/init.py", line 33, in call
self.blob = self.serialize(data)
File "/root/src/openaps/openaps/reports/reporters/init.py", line 31, in serialize
return self.method.serialize(render(data), self)
File "/root/src/openaps/openaps/vendors/process.py", line 56, in prerender_json
return json.loads(data)
File "/usr/lib/python2.7/json/init.py", line 338, in loads
return _default_decoder.decode(s)
File "/usr/lib/python2.7/json/decoder.py", line 366, in decode
obj, end = self.raw_decode(s, idx=_w(s, 0).end())
File "/usr/lib/python2.7/json/decoder.py", line 384, in raw_decode
raise ValueError("No JSON object could be decoded")
ValueError: No JSON object could be decoded
iob.json: Unexpected end of input is the key there
Diabetic_Dude
@diabetic_dude_twitter
Sep 08 2017 18:47
awesome thank you
Scott Leibrand
@scottleibrand
Sep 08 2017 18:47
if it doesn't self-resolve, check the contents of monitor/iob.json
Phil
@drnoname82_twitter
Sep 08 2017 18:47
@davidkeddydb Those errors are normal in the first 20 minutes or so
fidoman
@efidoman
Sep 08 2017 18:48
@scottleibrand - for the xdrip-js prototype work that some of us are working on, we need to know which script we should use to post entries to NS. ns-upload or ns-upload-entries. We want to do that along with a posting to xdripAPS so that we get both openaps and NS updated as soon as the g5 gives us a glucose value. Or do you have other suggestions? When I tested it without an immediate NS update, my watch always lagged a few minutes behind. Also, I implemented backfill in the wrapper script so it will fill in gaps in NS for times when rig is off the internet.
David
@davidkeddydb
Sep 08 2017 18:48
:+1: I am so pumped to try some of the stuff in dev that I just want to make sure it goes
Scott Leibrand
@scottleibrand
Sep 08 2017 18:49
@efidoman I'd have to go look at what the ns-upload alias uses for that
fidoman
@efidoman
Sep 08 2017 18:53
From what I can tell, it will allow us to pass a parameter that is a json file with one (or more) entries in it. Then it will curl it to NS using regular or token based authentication (whichever the rig is using).
Scott Leibrand
@scottleibrand
Sep 08 2017 18:54
I believe there is some other stuff it does first to check for gaps in the data in NS and only upload the non-duplicate data.
Dana Lewis
@danamlewis
Sep 08 2017 18:54
(btw, huge high five @efidoman , @thebookins , @applehat, and everyone else working on xdrip-js!!!)
tynbendad
@tynbendad
Sep 08 2017 18:55
Xdrip-js??! Sounds like something I want... Need any testers?
fidoman
@efidoman
Sep 08 2017 18:55
Yes, those checks will be helpful. I'll try to test the system calling ns-upload directly from the xdrip-js wrapper script. Maybe we just need to change the order so that ns-upload gets called sooner? I guess it depends on the timing of the 5 minute g5 BG updates and when ns-upload gets called. Would be perfect if they were one right after the other.
tynbendad
@tynbendad
Sep 08 2017 18:56
Does anyone else experience occasional hang of the explorer rig? Mine seem to hang after a week or two.
fidoman
@efidoman
Sep 08 2017 18:56
@danamlewis - :+1:
@tynbendad - I do experience a rig hang from time to time. Much less though lately after disabling IPv6. I usually reboot my rig at least once per week for some reason or another.
Scott Leibrand
@scottleibrand
Sep 08 2017 18:58
@efidoman on a rig with g4-upload configured, the ns-upload stuff gets put in a separate openaps instance in ~/myopenaps-cgm-loop/ so it's not dependent on pump comms timing
fidoman
@efidoman
Sep 08 2017 18:59
@tynbendad - yes, the more testing the better. Right now it is in a very rough diy phase. We are getting closer though. Jump over to the xdrip-js channel if you want to help out.
tynbendad
@tynbendad
Sep 08 2017 18:59
How did you disable ipv6? I've just added a cron entry to reboot twice a week, I haven't been making changes so not rebooting manually lately.
fidoman
@efidoman
Sep 08 2017 19:00
@scottleibrand - that's interesting ... we should consider a configuration like g4-upload for the CGM type that will eventually be defined for xdrip-js
tynbendad
@tynbendad
Sep 08 2017 19:00
Awesome, I will check it your channel this w/e!
Out
fidoman
@efidoman
Sep 08 2017 19:04
I added 3 lines to /etc/sysctl.conf
net.ipv6.conf.all.disable_ipv6=1
net.ipv6.conf.default.disable_ipv6=1
net.ipv6.conf.lo.disable_ipv6=1
then type sudo sysctl -p
Scott Leibrand
@scottleibrand
Sep 08 2017 19:07
@efidoman as much as I hate that we have to do it, I'd be OK with a PR to do that during openaps-install if you'd be up for that...
since oref0-online only verifies IPv4 connectivity for now, disabling IPv6 seems prudent.
fidoman
@efidoman
Sep 08 2017 19:07
@tynbendad - Cool. It is actual @thebookins channel. I'm just helping out
@scottleibrand - OK - I will try to add the disabling of IPv6 later tonight or tomorrow. Agreed. It is silly to have to do that. But in my case, it stabilized the rig signficantly.
Scott Leibrand
@scottleibrand
Sep 08 2017 19:09
FYI all: We're planning to merge openaps/oref0#591 and release 0.5.3 today if no objections.
tynbendad
@tynbendad
Sep 08 2017 19:11
Fwiw dev branch from a few weeks ago had been great for us, keep up the great work!
Has
Dana Lewis
@danamlewis
Sep 08 2017 19:18
:+1: great to hear.
Diabetic_Dude
@diabetic_dude_twitter
Sep 08 2017 19:20
@scottleibrand in reference to the comment you made: "iob.json: Unexpected end of input" is the key to @davidkeddydb s problem. I had the same issue, has not resolved, it has been about an hour, it has not fixed. I checked the iob.json file and it appears to be blank ... looked at it using cat, vi, and nano
I can post logs but they are the same
Could not parse input data:  [SyntaxError: /root/myopenaps/monitor/iob.json: Unexpected end of input]
Traceback (most recent call last):
David
@davidkeddydb
Sep 08 2017 19:22
@scottleibrand Same here. I have other rigs, not sweating it just wanted to try it. This rig is getting a lot of radio errors as well
Diabetic_Dude
@diabetic_dude_twitter
Sep 08 2017 19:23
yup same here
was fine before I messed with the preferences.json
Dana Lewis
@danamlewis
Sep 08 2017 19:23
drill down time: openaps.readthedocs.io/en/latest/docs/Troubleshooting/oref0-setup-troubleshooting.html?highlight=drill down#running-commands-manually-to-see-what-s-not-working-from-an-oref0-setup-sh-setup-process
(that's a common one, so if you want to add that drill down as an example to that section in the docs, other people would probably appreciate it too)
David
@davidkeddydb
Sep 08 2017 19:24
I am pretty sure mine is mmtune issue as I just go this: Listening for 30s silence before mmtuning: .No pump comms detected from other rigs
mmtune: fatal: loose object f08c25ae484645a32b6ba8f37f25ce545aa8ebfa (stored in .git/objects/f0/8c25ae484645a32b6ba8f37f25ce545aa8ebfa) is corrupt'
"916.636", 0, -99 waiting for 78 second silence before continuing
Will start drilling down
Dana Lewis
@danamlewis
Sep 08 2017 19:25
make sure edison is seated good on the board too
David
@davidkeddydb
Sep 08 2017 19:25
@danamlewis mine is locked down. That is about all I am certain of
Diabetic_Dude
@diabetic_dude_twitter
Sep 08 2017 19:26
I found an error in my preferences.json
fixed that, added one comma and did a reboot
going to do some work and will check back and drill down god willing I have the time. If not it is time for me to pull out my backup rig
Scott Leibrand
@scottleibrand
Sep 08 2017 19:29
Loose object is a git thing. If you rename your myopenaps directory and start over, it will make a new one with --nogit.
dan lightner
@danimaniac
Sep 08 2017 19:31
What is the most recent (n=1)* count and estimated cumulative hours? Is your Aug 9 blog post still the most recent, @danamlewis ?
^ latest update is always there
tynbendad
@tynbendad
Sep 08 2017 19:32
This is an insane amount of green for my non pre bolusing teen... I thought we'd have to use fiasp to get this, but we haven't yet. I think he's cutting down on carbs and starting to prebolus and not forget boluses as much lately.. Thanks to openaps!
(I can't post pic on mobile but he's pretty much in 70-180 range for all of 48 hours)
Dana Lewis
@danamlewis
Sep 08 2017 19:36
that's awesome :) :green_heart:
Diabetic_Dude
@diabetic_dude_twitter
Sep 08 2017 19:39
ok back to work time and working again thanks @scottleibrand and @danamlewis
backed up myopenaps and ran the run again script
after renaming it that is
Scott Leibrand
@scottleibrand
Sep 08 2017 19:42
(you may also want to copy back your preferences.json and autotune/ directory)
David
@davidkeddydb
Sep 08 2017 19:42
@diabetic_dude_twitter so you have dev 6.0 working on your rig?
Diabetic_Dude
@diabetic_dude_twitter
Sep 08 2017 19:42
yup did that too already @scottleibrand
Scott Leibrand
@scottleibrand
Sep 08 2017 19:42
:+1:
Diabetic_Dude
@diabetic_dude_twitter
Sep 08 2017 19:42
yes @davidkeddydb since the 5th
been having a real bad time with highs at night was getting desperate to fix them
David
@davidkeddydb
Sep 08 2017 20:02
@scottleibrand I had an install issue but reinstalled and got dev working. Take the rapid-acting for a spin and see the difference from bilinear. Thanks for the help
Scott Leibrand
@scottleibrand
Sep 08 2017 20:02
:+1:
katie disimone
@Kdisimone
Sep 08 2017 20:16
@tynbendad 👍🏻👍🏻👍🏻
Jacob H
@jdhigh
Sep 08 2017 21:39
is the autotune_recommendations.log the place I go to see what my CURRENT best recommendations are, without re-running autotune?
Scott Leibrand
@scottleibrand
Sep 08 2017 21:39
correct
as of the last autotune run (usually that morning just after midnight)
Jacob H
@jdhigh
Sep 08 2017 21:39
thanks. It always seems to take a long time so I wanted to avoid the wait. :smile:
drmartinezs
@drmartinezs
Sep 08 2017 22:14
Radio ok. Listening: .No pump comms detected from other rigs /usr/local/bin/oref0-pump-loop: line 320: oref0_init_pump_comms.py: command not found Listening for 30s silence before mmtuning: .No pump comms detected from other rigs mmtune: stderr: 'fatal: pathspec 'myopenaps/enact/suggested.json' did not match any files’
can some body help me?
mmtune: stderr: 'fatal: pathspec 'myopenaps/enact/suggested.json' did not match any files’
Martin Haeberli
@mhaeberli
Sep 08 2017 23:23
can I get a pushover from Nightscout and/or from Edison/openaps when not looping because for example Edison can’t see pump, etc? if so, how
tynbendad
@tynbendad
Sep 08 2017 23:46
@mhaeberli you can pushover anything from the rig, see the doc "autotune-to-pushover.rtf" in the files section of the Looped facebook group
Scott Leibrand
@scottleibrand
Sep 08 2017 23:53
and NS can pushover when it hasn't seen an update from the rig in X minutes