These are chat archives for nightscout/intend-to-bolus

18th
Jan 2018
peterfulvi
@peterfulvi
Jan 18 2018 03:18
I was reading the docs about the A52 error. I want to go withe the easy bolus method(giving less than half up front then letting SMB do the rest. Do i have to enale the A52 risk factor in preferences?
alimhassam
@alimhassam
Jan 18 2018 03:50
@peterfulvi yes
Scott Leibrand
@scottleibrand
Jan 18 2018 08:02
No, you only have to enable the A52 risk preference if you intend to use the Bolus Wizard, not easy bolus.
peterfulvi
@peterfulvi
Jan 18 2018 10:58
So in that case SMB is enabled if I enable SMB options in preferences.json. I looked at the loop and this line is still there 'disabled (no enableSMB preferences active)'
philipgo
@philipgo
Jan 18 2018 11:16
@peterfulvi Can you do edit-pref and post your preferences?
Jon Cluck
@cluckj
Jan 18 2018 13:21
Also, to have SMB work, you need the preferences turned on, and one of the conditions for them (COB or temporary target, whichever you have enabled in preferences)
ZandMarc
@ZandMarc
Jan 18 2018 13:39
In papertrail I see these repeated messages about DHClient from my OpenAPS rig:
Jan 18 14:33:48 localhost dhclient: dhclient.c:1966: Failed to send 300 byte long packet over bnep0 interface.
Jan 18 14:33:48 localhost dhclient: send_packet: No such device
Can someone suggest what this is and what I should do about it?
LinnBee
@petrichordb
Jan 18 2018 14:47

Open APS, Medtronic Enlites - Had pump date issue (was in future) which I believe is resolved. Was running ok overnight. Now it is stuck retrying pump loop. I am getting current sensor reading in NS. Pump is close to rig. I am using BT to android for NS. Error message is Attempting to retrieve MDT CGM data from pump
MDT CGM data retrieved
No new MDT CGM data to reformat

Old pumphistory: RefreshKeyError: 9

Error, retrying
pump_loop_completed more than 15m old; waiting for 30s silence before mmtuning
Radio ok. Listening: .
I am also getting a persistent future entry

jzycom123
@jzycom123
Jan 18 2018 14:50
I'm going to connect a PEBBLE watch with EDISON, but the question arises, where am I doing something wrong?
root@tangyouyingbeng:~# bluetoothd --version
5.44
root@tangyouyingbeng:~# systemctl status bluetooth.service # it's inactive
● bluetooth.service
Loaded: not-found (Reason: No such file or directory)
Active: inactive (dead)
root@tangyouyingbeng:~# sudo systemctl start bluetooth.service
sudo: unable to resolve host tangyouyingbeng
Failed to start bluetooth.service: Unit bluetooth.service failed to load: No such file or directory.
root@tangyouyingbeng:~# systemctl status bluetooth.service # it's active
● bluetooth.service
Loaded: not-found (Reason: No such file or directory)
Active: inactive (dead)
root@tangyouyingbeng:~#
root@tangyouyingbeng:~# sudo bluetoothctl
sudo: unable to resolve host tangyouyingbeng
Waiting to connect to bluetoothd...
peterfulvi
@peterfulvi
Jan 18 2018 15:22
Here are my preferences
{
"max_iob": 12,
"max_daily_safety_multiplier": 3,
"current_basal_safety_multiplier": 4,
"autosens_max": 1.2,
"autosens_min": 0.7,
"rewind_resets_autosens": true,
"adv_target_adjustments": false,
"exercise_mode": false,
"wide_bg_target_range": false,
"sensitivity_raises_target": true,
"unsuspend_if_no_temp": false,
"enableSMB_with_COB": true,
"enableSMB_with_temptarget": true,
"enableUAM": true,
"curve": "rapid-acting",
"offline_hotspot": false
There all enabled
jzycom123
@jzycom123
Jan 18 2018 15:35
@scottleibrand Hello! Is there any more detailed tutorial?
Pancreabble - offline connection to Pebble watch
philipgo
@philipgo
Jan 18 2018 16:28
@peterfulvi Looks good! As long as you have autotune enabled and don't use the bolus wizard, SMB should work.
peterfulvi
@peterfulvi
Jan 18 2018 16:34
@drnoname82 Thanks
Thacher
@thacherT1D
Jan 18 2018 19:41
@danamlewis suggested alternatives to the intel edison now that it's discontinued? (I want to start testing before I need one)
Scott Leibrand
@scottleibrand
Jan 18 2018 22:43
The next-gen hardware will be the Pi + Explorer HAT.
Hichame Yessou
@hichameyessou
Jan 18 2018 23:30
How can I modify the API_SECRET? In crontab it's hashed..
Eric
@ecc1
Jan 18 2018 23:34
It's a parameter (environment variable) for your cgm-remote-monitor (Nightscout) server. You can set it to whatever you want. How you set it depends on how you're hosting your Nightscout server.
Hichame Yessou
@hichameyessou
Jan 18 2018 23:38
Sorry, I meant from my Raspberry. I have an already running rig, and I have changed cloud provider (Azure->Heroku) due to the CPU Usage quotas and I am changing the API_SECRET on it..