These are chat archives for nightscout/intend-to-bolus

3rd
Feb 2018
skubesch
@skubesch
Feb 03 2018 03:53
So far I've uninstalled and reinstalled flask, which is now showing as /usr/local/bin/flask -rwxr-xr-x 1 root root 210 Feb 2 17:50 /usr/local/bin/flask and then I updated the dev branch and reran the setup hoping that would change things, but I still don't get any prompts when running cd ~/src/oref0/www && export FLASK_APP=app.py && flask run -p 80 --host=0.0.0.0 and nothing is listed for ps -ef | grep -v grep | grep flask
Bob Duerr
@Duer0049
Feb 03 2018 05:14
Hello All, Looking for a help with an issue accessing the rig. We updated our home Wifi and when I went in to update the configuration on the rig, I could not get it to wake up when doing a Serial connection, the green cursor comes up, but nothing happens. I have tried restarting the rig, different cables, different USB ports. I have tried to connect over wireless but I can't find the IP address of the rig. It is all still working over a BT tether over the phone, but I can't access it. Any help is appreciated. Thanks.
Scott Leibrand
@scottleibrand
Feb 03 2018 06:27
connect the USB cable to the UART port first, and establish the connection. if it doesn't respond at first, hold down the black power button for 20s or until the lights go off, then a couple more seconds to turn it back on. you should see the rig boot up over console.
Bob Duerr
@Duer0049
Feb 03 2018 06:58
Thanks Scott. Tried that two different times, nothing happened. The connection establishes, the green cursor comes up, but that is it, nothing else.
Scott Leibrand
@scottleibrand
Feb 03 2018 07:32
LEDs working normally? If so, you probably have a bad cable.
Also try reseating the Edison on the EB.
Martin Haeberli
@mhaeberli
Feb 03 2018 08:23
AttributeError: 'NoneType' object has no attribute 'iter_records'
Mmtune looks good. But looks like not really looping because of this.
advice?
Scott Leibrand
@scottleibrand
Feb 03 2018 08:24
What command is that output from?
That looks like the “no CGM is plugged in” error.
If so, check lsusb
Lorenzo Sandini
@lsandini
Feb 03 2018 09:24
@Duer0049 if it works via BT, then you can log in using your phone, with Termius or another SSH client app. From there you can edit-wifi etc
Steve Bernacki
@sbernacki
Feb 03 2018 16:54
Hi everyone -- So when my wife takes/eats rescue carbs to treat a low, what is the best way for her to enter those carbs so that OpenAPS is aware of it? Would that be carb correction entry in the care portal? We're trying to flatten out the yo-yo'ing that can occur.
Dana Lewis
@danamlewis
Feb 03 2018 17:01
@sbernacki an ifttt button of carbs + slightly high (even 110) temp target is helpful for those
Steve Bernacki
@sbernacki
Feb 03 2018 17:27
@danamlewis ok Thanks, so just standard carb correction and a higher temp, we'll add that. oh and look, there's an example entry of it already :) !
Dana Lewis
@danamlewis
Feb 03 2018 17:33
Man, those docs are handy :D :+1:
Bob Duerr
@Duer0049
Feb 03 2018 21:08
@lsandini I haven't used terminus before, do I connect with the app on the phone? If so, how? I have tried a few different connections but can't make anything work?