These are chat archives for nightscout/intend-to-bolus

6th
Feb 2018
fabe21
@fabe21
Feb 06 2018 01:55
image.png
Hi , I just edited preferences but not sure what to choose for save to save the new prefs to my rig . please help.
Eyob
@eyobarefaine
Feb 06 2018 02:05
Can any one explain to me what these two blue dotted lines mean on my nightsocut site?
Dana Lewis
@danamlewis
Feb 06 2018 02:07
@eyobarefaine that's AR2 predictions. if you're using OpenAPS, you can switch to the purple prediction lines. http://openaps.readthedocs.io/en/latest/docs/While%20You%20Wait%20For%20Gear/nightscout-setup.html#how-to-display-openaps-purple-prediction-forecast-lines
Eyob
@eyobarefaine
Feb 06 2018 02:17
Thanks Dana. I just did.
Eyob
@eyobarefaine
Feb 06 2018 03:07
The uploader keeps saying Pump is expecting sensor communication. Poll due in xxx seconds ...does anybody know what I'm missing here?
it doesn't actually upload even after 299 seconds.
Dana Lewis
@danamlewis
Feb 06 2018 03:08
are you using an OpenAPS rig, or a traditional android uploader?
Eyob
@eyobarefaine
Feb 06 2018 03:09
traditional android uploader
Jieseldeep
@Jieseldeep
Feb 06 2018 05:34
Ok, I keep running out of space and the rotate log trick doesn't do anything. How do I figure out what's filling up my Edison?
Jieseldeep
@Jieseldeep
Feb 06 2018 05:43
Hmm, tried the NCDU command and didn't quite before I started typing another command...I ended up deleting my log directory!
Do I need to start over?
th122
@th122
Feb 06 2018 09:37
@Jieseldeep
  • when deleting a logfile, as long as there stil is a process writing to it, it won’t free any disk space, since the writing process still has a file-handle for it (and thus may even still continue to fill it up). You would have wanted to empty it instead: :> filename.
    • if you deleted the diretory itself, you’ll need to recreate it. (hopefully there’s enough space left for that, or you would have to sneak the creation into the startup sequence of the edison).
  • you might want to search for any files that are currently being written to. Either using a tool like ofiles (if installed) or using find: find / -newer <a file you just created> -ls
tepidjuice
@tepidjuice
Feb 06 2018 15:27
the green radio antenna light on my explorer board is rapidly flashing on and off and this message is in logs:
Radio check failed. mmeowlink.exceptions.CommsException: Could not get subg_rfspy state or version. Have you got the right port/device and radio_type?
Tried a reboot and a hard reset still happening is the board bunk or could it be the edison?
Scott Leibrand
@scottleibrand
Feb 06 2018 15:29
There’s a page for that in the docs.
tepidjuice
@tepidjuice
Feb 06 2018 15:32
Would you be able to link it? I've only found the page explaining what each of the lights mean.
tepidjuice
@tepidjuice
Feb 06 2018 15:59
Following the steps in https://openaps.readthedocs.io/en/latest/docs/Resources/troubleshooting.html I get this message on trying to reflash the chip.This code is only tested on CC1110. Unsupported chip id = 0x00. Chip erase failed.
Following all the steps I have the same issue as before.
Scott Leibrand
@scottleibrand
Feb 06 2018 16:22
have you tried reseating the Edison on the Explorer Board?
if that's not a step on that page, you should PR it in. :)
Tore Bjørndalen
@BjoTore_twitter
Feb 06 2018 17:48
image.png
What does the yellow marked text mean? Constrained by something?
Scott Leibrand
@scottleibrand
Feb 06 2018 17:51
no, it's comparing the currently running temp to what is needed, to determine whether it needs to set a new temp or let the current one run
Tore Bjørndalen
@BjoTore_twitter
Feb 06 2018 17:53
So, decision is made in the next loop?
Scott Leibrand
@scottleibrand
Feb 06 2018 17:53
no, that's the reasoning for "Temp Basal Started 1.45 for 30m"
it's probably clearer if you look at the pump-loop.log and not just the pill
Tore Bjørndalen
@BjoTore_twitter
Feb 06 2018 17:57
Thanks, I will look at the log. The negative Basal IOB does that in any way indicate too low basal setting?
fabe21
@fabe21
Feb 06 2018 17:57
So I edited wifi preferences yesterday and was successful connected to home wifi. in morning I left house and changed to wifi hotspot on mobile phone, connection still good. Returned home, turned off mobile hotspot but now Rig is not reconnecting to Home WIFI. I plugged in Rig , watched log and it said No loop - is it out of range or maybe battery too low. No that was not the case. Any ideas ? thanks.
Bob Duerr
@Duer0049
Feb 06 2018 18:25
@lsandini Thank you, that was what I needed.