These are chat archives for nightscout/intend-to-bolus

3rd
May 2018
HebertPin
@HebertPin
May 03 2018 04:39

I'm still bothering, we checked Nightscout and Heroku and returned to arm the loop and did not identify any errors but it still does not work, they see something that may be wrong so the loop does not work.
There are some things that catch my attention
date: invalid date 'null'
Could not smb_verify_suggested
Are these mistakes correct?

And at the end it says Unsuccessful oref0-pump-loop

Thanks for any help you can give me.

imagen.png
Scott Leibrand
@scottleibrand
May 03 2018 04:48
You’re focusing on the symptoms, not the root cause, which is the inability to get BG data from Nightscout.
marafie
@marafie
May 03 2018 12:15
@Samuchco i checked the space,,,, see below
image.png
referring to your question if i checked mlab space on disk
marafie
@marafie
May 03 2018 12:23
when i checked the table i see its ok, copied it to pasted it in notepad
image.png
no idea why NS is not getting the pump status
Jon Cluck
@cluckj
May 03 2018 13:04
you need to look for the "size on disk," I have a feeling based on those database sizes, that it's 496MB (aka full)
micheliseferian
@micheliseferian
May 03 2018 17:12
Hi all. Im having space issues in my rig, what are the commands i have to insert in order to erase files¿ thank you
imagen.png
Linux command "rm", check syntax options "man rm"
micheliseferian
@micheliseferian
May 03 2018 17:39
@BjoTore_twitter thank for your answer, i already ran rm -rf /dev/rootrm -rf /dev/root but when i check rig space after that it keeps saying that its 100 full. Did i erase more than i had to¿
imagen.png
Juan Mejías
@juanjuanmejias_twitter
May 03 2018 20:38
Hello everyone. Is it a problem to set the target range to 100-100? Should I allow some room between top and bottom? I'm fearing this could cause some trouble with the oref0 algorithms
Scott Leibrand
@scottleibrand
May 03 2018 20:39
100-100 is a good target range. we recommend setting the top and bottom to the same value.
Juan Mejías
@juanjuanmejias_twitter
May 03 2018 20:41
OK, that's perfect
Thanks!
cdiulus
@cdiulus
May 03 2018 20:44
Has anyone seen this I am trying to log in to my rig. I tried looping offline today with an OTG cord to dex and another to a USB battery, but otherwise everything is looping fine. I just wanted to get in to add a wifi login/password. : Carries-MacBook-Air-2:~ carriediulus$ ssh root@aqua.local
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@ WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED! @
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
IT IS POSSIBLE THAT SOMEONE IS DOING SOMETHING NASTY!
Someone could be eavesdropping on you right now (man-in-the-middle attack)!
It is also possible that a host key has just been changed.
The fingerprint for the ECDSA key sent by the remote host is
SHA256:Pj6BuQHzmfuzp1G2E1iSG102uWPz86EBP1N654C02MU.
Please contact your system administrator.
Add correct host key in /Users/carriediulus/.ssh/known_hosts to get rid of this message.
Offending ECDSA key in /Users/carriediulus/.ssh/known_hosts:1
ECDSA host key for aqua.local has changed and you have requested strict checking.
Host key verification failed.
Juan Mejías
@juanjuanmejias_twitter
May 03 2018 20:47
What's the recommended setting for the range on Nightscout? I'm guessing it should be a reference range? 90-180?
Martin Haeberli
@mhaeberli
May 03 2018 21:17
@cdiulus this is not unusual - you could consider rm /Users/carriediulus/.ssh/known_hosts, or deleting the first line of that file
what is going on is that your MacBook has memorized some information about that device (from some other time, maybe for a different device), and the information is inconsistent.
@juanjuanmejias_twitter which range?
Martin Haeberli
@mhaeberli
May 03 2018 21:21
@scottleibrand :+1:
Juan Mejías
@juanjuanmejias_twitter
May 03 2018 21:21
image.png
@scottleibrand I mean these. I'm guessing it would be silly to set those to 100-100
Scott Leibrand
@scottleibrand
May 03 2018 21:22
gotcha. those just indicate where the lines are that visually indicate "in range", and where it transitions from green to yellow if you have colors enabled
so it's totally YDMV. I think the defaults are pretty reasonable, as is something like 90-180 or 70-140 or anything in between, depending on what you consider low vs. high
Juan Mejías
@juanjuanmejias_twitter
May 03 2018 21:23
Yes, so it's just a visual and statistic reference. OK
Scott Leibrand
@scottleibrand
May 03 2018 21:23
yep
Juan Mejías
@juanjuanmejias_twitter
May 03 2018 21:24
Thanks :smile:
Eric
@ecc1
May 03 2018 21:44
@micheliseferian You didn't erase anything (except the "device node" for the root file system). Check the docs on trouble shooting and make sure you're removing the correct files and directories.
cdiulus
@cdiulus
May 03 2018 23:39
@scottleibrand Thank you!