These are chat archives for nightscout/intend-to-bolus

8th
Jun 2018
Dana Lewis
@danamlewis
Jun 08 2018 01:18
:+1:
garykidd
@garykidd
Jun 08 2018 01:28
anybody experience any temperature rise while rigs are charging 18650's?
henghayan
@henghayan
Jun 08 2018 03:07
I have installed the openaps in the Pi ,and set Nightscount,so what's next?
use Dexcom G5 ,and 722pump
How the G5 and 722 connect Pi?
Scott Leibrand
@scottleibrand
Jun 08 2018 03:52
@henghayan Can you elaborate a bit? what page of the openaps documentation are you on? what are you trying to do? if it's easier, feel free to reply in your native language and we can translate
henghayan
@henghayan
Jun 08 2018 04:01
I currently want to use PI to build openaps. I have completed the openaps install step and set Nihgscout. I read in document that I can work with the Dexter com G5 and 722 pumps, and I'm ready for that, so what do I do next
Dexcom G5
Martin Haeberli
@mhaeberli
Jun 08 2018 04:29
@henghayan - for starters, make sure your G5 data is flowing to your nightscout site.
the CGM data flows G5 transmitter -> iPhone/Android Phone -> Dexcom Share cloud -> Nightscout -> Pi (assuming your Pi wifi is connected to the internet)
you should be able to see the data flow to your nightscout site through a web browser
henghayan
@henghayan
Jun 08 2018 05:00
@mhaeberli thanks
Martin Haeberli
@mhaeberli
Jun 08 2018 06:27
@henghayan pls confirm what firmware version your 722 has. As I recall, it should be 2.4A or smaller
JohnDoeAkira
@JohnDoeAkira
Jun 08 2018 06:36
@garykidd I intend to use a 18650 with my edison explorer (with this case laready printed : https://www.thingiverse.com/thing:2798858). I have not charges the battery yet though. I'll report when I'll do the first charge. What mah and max change intensity is your 18650 model ?
john36m
@john36m
Jun 08 2018 09:50
Raspberry Pi zero. I could not get the wifi to connect until I added this line into my wpa_supplicant.conf country=US
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1
network={
ssid=“MyNetwork”
scan_ssid=1
psk=“MyPW”
}
john36m
@john36m
Jun 08 2018 10:03
Note the scan_ssid in the above. Couldn't connect without it.
lyntonr
@lyntonr
Jun 08 2018 11:02
@john36m you may also want to add extra network= ... Blocks for you phone hotspot or other WiFi sources. I also had to install the following packages to install oref successfully. ’apt-get install glib2.0 libdbus-1-dev libudev-dev libreadline-dev'
john36m
@john36m
Jun 08 2018 12:18
@lyntonr Already did the extra networks. trying to install 0.7.0-dev now I'll try the other stuff later if/when it fails.
john36m
@john36m
Jun 08 2018 12:29
Explorer hat is running under 0.7.0-dev. As with most things like this, once I made all the mistakes one can possible make, it worked easily. Love the graph. It would be a shame to put it in a case. Using computer power and not a battery. How do I get 0.6.2-dev?
PS Dex G5 and 523 pump
lyntonr
@lyntonr
Jun 08 2018 14:27
0.6.2 has been moved to dev branch now so just check out the dev branch, its in the docs under how to upgrade oref somewhere. You basically pull and install the current dev branch. I don't know if installing over 0.7.0 will be a problem others may suggest a fresh install. But it try and see .
john36m
@john36m
Jun 08 2018 14:28
I have a spare sd card and will try it there.
lyntonr
@lyntonr
Jun 08 2018 14:33
Good idea, that will definitely work and then you have both to play with.
john36m
@john36m
Jun 08 2018 16:59
Well this one seems to be hangingThe last thing I got was
fetch failed https://registry.npmjs.org/handlebars/-/handlebars-4.0.11.tgz And I have a spinning ascii graphic. For about 10 minutes or more
lyntonr
@lyntonr
Jun 08 2018 17:19
Not sure mate, all I can say is mine worked when I installed master then switched to dev. Maybe try that or wait for one of the more experienced people here to chip in.
john36m
@john36m
Jun 08 2018 17:21
I installed the pgms you mentioned previously glib2.0 libdbus-1-dev libudev-dev libreadline-dev and then it has gotten further. Now in the middle of the setup script. I did not need those pgms for .0.7.0-dev
lyntonr
@lyntonr
Jun 08 2018 17:26
Those packages were required for the bluez bluetooth package to install . possibly they are not needed if you don't select the connect to phone by BT option during install.
richardshane
@richardshane
Jun 08 2018 17:33
I smoked my explorer board while charging the attached lipo battery using a charger in my car. Is using car charger bad idea? Any other charging limitations I should be aware of?
Martin Haeberli
@mhaeberli
Jun 08 2018 18:10
@richardshane I don’t know of a reason why that should have happened...
@john36m curious - why would it be a shame to put it in a case? (case could still show off beautiful display) ...
john36m
@john36m
Jun 08 2018 18:29
@mhaeberli If you can show me a good case that does this, I would be happy to change my mind!
Using Explore Hat and Pi Zero. Running dev which is 0.6.2-dev and it seems to be looping OK, but I am seeing nothing on the display other than its boot up graphics During the install, it never asked me if I wanted to download or build the HAT stuff. I there a non painful fix for this or do I need to start over?
NSewar
@nsewar01
Jun 08 2018 18:36
Finally got pihat running. The welcome screen looks great but I cant read the text on the menus as it seems to be blurred, have I done something wrong?
NSewar
@nsewar01
Jun 08 2018 18:42
in fact the screen shows symbols not letters?
NSewar
@nsewar01
Jun 08 2018 18:47
What does the on off switch do on the Hat? How do I get back to the welcome screen from the illegible menu page without rebooting?
Martin Haeberli
@mhaeberli
Jun 08 2018 18:48
screen shows symbols and letters. in my experience, some of the displays show failures out of the box that hurt the resolution. you can safely reboot via ssh. look closely at the unicorn shown just after reboot finishes; on the broken displays I have seen, the E in explorer is missing the middle cross bar.
in theory, double tapping the ‘top’ button takes you out a level in the menu system. the reason i say ‘in theory’ is that, speaking for myself, i’m not yet fully comfortable navigating the menus
@john36m i may have a candidate case after the weekend… still iterating
(designed by our older daughter, an ME undergrad)
NSewar
@nsewar01
Jun 08 2018 18:50
Thanks Martin, how do I reboot via ssh?
Martin Haeberli
@mhaeberli
Jun 08 2018 18:52
log in to the device through ssh; then reboot now (or sudo reboot now if not logged in as root)
NSewar
@nsewar01
Jun 08 2018 18:52
thanks
@mhaeberli you are correct the crossbar on the E is missing....I guess that means I got a dud! Is this defect known to the manufacturer?
Martin Haeberli
@mhaeberli
Jun 08 2018 19:23
I don’t know. in your case, I suspect you bought your explorer hat through enhanced radio devices, so I would ask them for help.
more generally, out of sample of 5 explorer hats I received at the same time, 1 had this problem out of the box, 1 failed in this way after a few days of carrying the gadget around (in this instance, without a proper case), and a third failed after been dropped about 3 feet by accident :-(
It sounds like others have seen this problem too.
garykidd
@garykidd
Jun 08 2018 19:53
root@MADHATTER:~# l
tail: cannot open '/var/log/openaps/pump-loop.log' for reading: No such file or directory
anything in particular why this would be ^ ?
@JohnDoeAkira 3400 mah---just using power off of pihat
Martin Haeberli
@mhaeberli
Jun 08 2018 20:04
@garykidd in my experience, that error can self resolve after it tries to loop for a while
garykidd
@garykidd
Jun 08 2018 20:04
never advanced for me---trying to cd ~/src/oref0 && git fetch && git checkout <feature-branch-name> && git pull && npm run global-install again
and now bash ~/myopenaps/oref0-runagain.sh
Martin Haeberli
@mhaeberli
Jun 08 2018 20:23
@garykidd can you remind me what your process was from flash SD forward?
garykidd
@garykidd
Jun 08 2018 21:03
looks like it's working--not sure why it flaked out first time
Martin Haeberli
@mhaeberli
Jun 08 2018 21:04
glad it’s working (I was reminded by @scottleibrand the other day how important it is to reboot after all installation is done - don’t know whether that is relevant to you.)
garykidd
@garykidd
Jun 08 2018 21:04
i followed you're method though and ctrl c'd then git fetch && checkout 070 and npm run global install
dont think so but...perhaps
Howlong before all errors roll off
?
Martin Haeberli
@mhaeberli
Jun 08 2018 21:07
not sure how to answer ‘how long’ - I am easily distracted by first few lines of ‘l’ output which may reflect from before even my last reboot. Usually things stabilize within maybe 10 minutes but I often give it 1/2 hour or so
garykidd
@garykidd
Jun 08 2018 21:07
bunch of type-error proprty 'map' etc.....maybe a typo somewhere...we'll see I suppose
Martin Haeberli
@mhaeberli
Jun 08 2018 21:07
can you paste a few lines?
garykidd
@garykidd
Jun 08 2018 21:08
Couldn't calculate COB
Retry 1 of refresh_pumphistory_and_meal
Pump history updated through 2018-06-08T17:00:37-04:00; meal.json Warning: could not parse monitor/glucose.json
Warning: could not parse monitor/carbhistory.json
/root/src/oref0/lib/determine-basal/cob.js:8
    glucose_data = inputs.glucose_data.map(function prepGlucose (obj) {
                                      ^

TypeError: Cannot read property 'map' of undefined
    at detectCarbAbsorption (/root/src/oref0/lib/determine-basal/cob.js:8:39)
    at recentCarbs (/root/src/oref0/lib/meal/total.js:104:13)
    at generate (/root/src/oref0/lib/meal/index.js:20:19)
    at Object.<anonymous> (/root/src/oref0/bin/oref0-meal.js:97:23)
    at Module._compile (module.js:409:26)
    at Object.Module._extensions..js (module.js:416:10)
    at Module.load (module.js:343:32)
    at Function.Module._load (module.js:300:12)
    at Function.Module.runMain (module.js:441:10)
    at startup (node.js:140:18)
Warning: could not parse monitor/glucose.json
Warning: could not parse monitor/carbhistory.json
/root/src/oref0/lib/determine-basal/cob.js:8
    glucose_data = inputs.glucose_data.map(function prepGlucose (obj) {
                                      ^

TypeError: Cannot read property 'map' of undefined
    at detectCarbAbsorption (/root/src/oref0/lib/determine-basal/cob.js:8:39)
    at recentCarbs (/root/src/oref0/lib/meal/total.js:104:13)
    at generate (/root/src/oref0/lib/meal/index.js:20:19)
    at Object.<anonymous> (/root/src/oref0/bin/oref0-meal.js:97:23)
    at Module._compile (module.js:409:26)
    at Object.Module._extensions..js (module.js:416:10)
    at Module.load (module.js:343:32)
    at Function.Module._load (module.js:300:12)
    at Function.Module.runMain (module.js:441:10)
    at startup (node.js:140:18)
Warning: could not parse monitor/glucose.json
Warning: could not parse monitor/carbhistory.json
/root/src/oref0/lib/determine-basal/cob.js:8
    glucose_data = inputs.glucose_data.map(function prepGlucose (obj) {
                                      ^

TypeError: Cannot read property 'map' of undefined
    at detectCarbAbsorption (/root/src/oref0/lib/determine-basal/cob.js:8:39)
    at recentCarbs (/root/src/oref0/lib/meal/total.js:104:13)
    at generate (/root/src/oref0/lib/meal/index.js:20:19)
    at Object.<anonymous> (/root/src/oref0/bin/oref0-meal.js:97:23)
    at Module._compile (module.js:409:26)
    at Object.Module._extensions..js (module.js:416:10)
    at Module.load (module.js:343:32)
    at Function.Module._load (module.js:300:12)
    at Function.Module.runMain (module.js:441:10)
    at startup (node.js:140:18)
Warning: could not parse monitor/carbhistory.json

Warning: setting mealCOB to 0 because currentDeviation is null/undefined
meal.json.new not found
Couldn't check_cp_meal - continuing
Martin Haeberli
@mhaeberli
Jun 08 2018 21:14
@garykidd are you using this against a live pump, or a test pump? if the latter, do a bolus or temp basal on the test pump - there is an issue if there are no events more recent than the last 24 hours. with a live pump, you lkely would have a bolus or temp basal in the last 24 hours, so this is not an issue.
garykidd
@garykidd
Jun 08 2018 21:22
live pump---it's working now---i htink it just needed to set something to zero
or maybe a few things
Martin Haeberli
@mhaeberli
Jun 08 2018 21:23
:+1:
garykidd
@garykidd
Jun 08 2018 21:27
YEAHBOYFINALLY!!!YEAH BOY FINALLY!!!
thx
garykidd
@garykidd
Jun 08 2018 21:36
just wondering does it maybe make sense to have autotune results stored on mlab (rather than just locally on each rig) or something that you could enable syncing between rigs easily? or is this already done?
Scott Leibrand
@scottleibrand
Jun 08 2018 21:36
I use rsync via my server. there's been talk of uploading the profile to NS, but no one has done the work
Marco
@CaptainBalou
Jun 08 2018 21:40
But that has already been working some months ago. But at some point the function was broken because of some error.
*oref0-upload-profile error.
garykidd
@garykidd
Jun 08 2018 21:41
interesting
Dana Lewis
@danamlewis
Jun 08 2018 21:41
Katie got it working for Loop-> update NS profile, so there's groundwork there if anyone wants to make that work for OpenAPS
Marco
@CaptainBalou
Jun 08 2018 21:41
I was aleaysmusing it and my My profile was sync to my autotuned one of my rig.
Dana Lewis
@danamlewis
Jun 08 2018 21:42
k. i don't think anyone else has used it that I heard of, so it wasn't widely used
garykidd
@garykidd
Jun 08 2018 21:42
ideas are easy---implementation less so
Dana Lewis
@danamlewis
Jun 08 2018 21:42
always :)
Marco
@CaptainBalou
Jun 08 2018 21:42
I just received some errors while eting the cron job as usual. But I am not good at analyzing that kind of scripts.
Yes Dana I agree it can be possible that I was the only one around the world but nevertheless it worked. So possibly it's enough to see why this error "const Hoeck = require Hoeck..." Occured and then it works again.i know I know...someone has to have time to debug it...
But be aware, I cannot test it anymore because my Dana RS arrived last Friday.
Dana Lewis
@danamlewis
Jun 08 2018 21:47
:+1:
Martin Haeberli
@mhaeberli
Jun 08 2018 21:55
can someone please remind me best way to search a gitter channel? @scottleibrand had some very nice wisdom in the last 8 weeks on how to rsync autotune stuff, and I wasn’t smart enough to write it down at the time.
garykidd
@garykidd
Jun 08 2018 21:58
just the search box in upper left--somewhat limited
not recent, but a few results
Martin Haeberli
@mhaeberli
Jun 08 2018 22:00
k thx
@garykidd @scottleibrand thx ; @garykidd I have always found the gitter search box results mostly useless...
garykidd
@garykidd
Jun 08 2018 22:01
yup
garykidd
@garykidd
Jun 08 2018 22:07
@scottleibrand thats really handy...
maybe that search concept would make a good pull request?
I'll do it if so...
Scott Leibrand
@scottleibrand
Jun 08 2018 22:09
mkdir -p ~/gitter; cd ~/gitter; for year in 2018; do for month in $(seq -w 1 12); do for day in $(seq -w 1 31); do curl -s https://gitter.im/nightscout/intend-to-bolus/archives/$year/$month/$day | grep -A1 js-chat-item-text | egrep -v "^--|div class" > intend-to-bolus.$year-$month-$day.txt; ls -la intend-to-bolus.$year-$month-$day.txt; done; done; done
that will download a copy of each day's archive (of 2018) and save it as plain text for you to search locally
garykidd
@garykidd
Jun 08 2018 22:10
cool
Martin Haeberli
@mhaeberli
Jun 08 2018 22:11
woot! on a macintosh - spotlight is then your friend ...
Scott Leibrand
@scottleibrand
Jun 08 2018 22:11
probably should ^C it after it gets to the future
Martin Haeberli
@mhaeberli
Jun 08 2018 22:11
:-) lol
garykidd
@garykidd
Jun 08 2018 22:11
or maybe not
cool...i never knew my mac had a real time machine
@scottleibrand love the display bud!
any suggetions yet on pihat cases w/ 18650 battery types?
Scott Leibrand
@scottleibrand
Jun 08 2018 22:16
tallygear soft cases work great
garykidd
@garykidd
Jun 08 2018 22:19
does the rig output video via the HDMI?
with the full sized image?
Scott Leibrand
@scottleibrand
Jun 08 2018 22:20
that's a Pi question for Google
garykidd
@garykidd
Jun 08 2018 22:20
k...know the rp3 did
Scott Leibrand
@scottleibrand
Jun 08 2018 22:20
I think you need an adaptor, but ya
we don't do anything special with the video, and I'm pretty sure the image we chose doesn't have a full GUI
so it's probably a text console
garykidd
@garykidd
Jun 08 2018 22:21
hmmm...I'm thinking next version has 4x larger color display....just joking---thisis neat to be able to see such valuable info at a glance.
thx
right re: the text console but if full image--who knows...could be useful
scottleibrand @scottleibrand buys @garykidd an Android phone and installs AndroidAPS on it :-p
garykidd
@garykidd
Jun 08 2018 22:24
@scottleibrand buys @garykidd an Android phone and installs AndroidAPS on it :-p....already have an android phone
havent messed with AndroidAPS though (yet)
like the monster Medtronic
Scott Leibrand
@scottleibrand
Jun 08 2018 22:25
if you want OpenAPS with a GUI, it's basically that
have to use a Roche Combo or Dana RS/R pump with it though
garykidd
@garykidd
Jun 08 2018 22:26
understood....but several reasons I like MM now
Scott Leibrand
@scottleibrand
Jun 08 2018 22:27
there's also https://gitter.im/RileyLinkAAPS/Lobby if anyone wants to contribute to the dev work required to get Medtronic pumps working with AndroidAPS via RileyLink
garykidd
@garykidd
Jun 08 2018 22:27
I was just wondering if that may be going on.....
freaky
thx
Scott, didnt you mention web interface fairly recently as well for OpenAPS?
DOes orangeish color LED reflect battery being charged on piHat?
scottleibrand @scottleibrand refuses to answer any more GUI questions
garykidd
@garykidd
Jun 08 2018 22:31
who typed that^
lsat line
Scott Leibrand
@scottleibrand
Jun 08 2018 22:31
that's what it shows when you do /me something
garykidd
@garykidd
Jun 08 2018 22:32
k thx figured something like that
Martin Haeberli
@mhaeberli
Jun 08 2018 22:32
@garykidd fyi there is some funny magic around the ‘charging’ light - basically, the PiHat doesn’t actually tell you when charging is done.
garykidd
@garykidd
Jun 08 2018 22:32
thx. wouldnt have thought of that as a GUI question---but thanks @mhaeberli
Scott Leibrand
@scottleibrand
Jun 08 2018 22:33
I was responding to the web interface question. OpenAPS doesn't have a working UI, and I don't intend to build one. if y'all want to make the web interface work, great, but I don't want to spend any more time talking about it.
scottleibrand @scottleibrand is grumpy today
garykidd
@garykidd
Jun 08 2018 22:34
scott, can you make my car talk to my mother automatically on tuesday's (so I don't have to)? {seriously, i love my mom, but seriously, this would be useful...haaa!!!}
Scott Leibrand
@scottleibrand
Jun 08 2018 22:34
not offended or anything, just done discussing it and wanted to be clear
lol
well played
garykidd
@garykidd
Jun 08 2018 22:35
5x5, bud. Cool!
Scott Leibrand
@scottleibrand
Jun 08 2018 22:35
thx for the cheer-up