These are chat archives for nightscout/intend-to-bolus

4th
Aug 2018
Paul Dickens
@thebookins
Aug 04 2018 00:20 UTC
I've just now fired up an Edison that has been lying dormant for a while, and it's making strange noises (like a faulty computer hard drive). It's working fine though. Anyone experienced that before? Should I be concerned?
Dana Lewis
@danamlewis
Aug 04 2018 00:40 UTC
hrm, don't think we've heard that (or reports of that). double check to make sure it's seated well? check battery is plugged in well, etc.?
Paul Dickens
@thebookins
Aug 04 2018 00:47 UTC
thanks @danamlewis will do
Dana Lewis
@danamlewis
Aug 04 2018 00:49 UTC
@thebookins which reminds me to ask you - does anyone in your neck of the woods have G6? Forgot to ask you if anyone was looking at xdrip-js on it yet.
Paul Dickens
@thebookins
Aug 04 2018 00:52 UTC
Not in my neck of the woods @danamlewis ; it's not approved in Australia yet. But we have support in drip-js now. @efidoman @cluckj are working on fine-tuning right now.
Dana Lewis
@danamlewis
Aug 04 2018 00:52 UTC
fantastic! thanks for the update @thebookins. and kudos @efidoman @cluckj :clap:
Jon Cluck
@cluckj
Aug 04 2018 00:53 UTC
it's working in calibration mode, I'm testing out no-calibration mode right this second :laughing:
Dana Lewis
@danamlewis
Aug 04 2018 00:53 UTC
:)
openaps/docs@11c7d7a feel free to put in better notes, but that's more of a reminder to myself that this conversation happened!
Jon Cluck
@cluckj
Aug 04 2018 01:00 UTC
:thumbsup:
naboull1
@naboull1
Aug 04 2018 01:53 UTC
@scottleibrand i checked the docs the only section on flashing talks about the edison im using the explorer board for the rpi zero would these instructions still work?
Has anybody else noticed that when SMB is running, the reservoir level checks don't make sense? I had a 0.3 bolus scheduled, reservoir 147.6 during beginning of cycle. "Checking reservoir: reservoir level before: 147.6, suggested: 147.6 and actual 147.5"
naboull1
@naboull1
Aug 04 2018 02:18 UTC

@scottleibrand when i try make ccprog i get this error

root@raspberrypi:~/src/ccprog# cd ccprog; make ccprog
-bash: cd: ccprog: No such file or directory
gcc -o ccprog ccprog.c readhex.c -lmraa
ccprog.c:9:18: fatal error: mraa.h: No such file or directory

              ^

compilation terminated.
Makefile:2: recipe for target 'ccprog' failed
make: * [ccprog] Error 1
root@raspberrypi:~/src/ccprog#

Scott Leibrand
@scottleibrand
Aug 04 2018 03:04 UTC
@N3FM what is odd about that? You have a basal running and it ticked over by 0.1U in between the two checks.
@naboull1 which version of oref0 do you have on that Pi?
naboull1
@naboull1
Aug 04 2018 03:28 UTC
@scottleibrand Im doing a fresh install from the documentation ill let you know when its finished
Scott Leibrand
@scottleibrand
Aug 04 2018 03:40 UTC
I believe mraa is installed by oref0-setup, but not sure if that’s done in both master and dev.
Jon Cluck
@cluckj
Aug 04 2018 03:41 UTC
iirc master should do it all the time, dev only does it if mdt-cgm is selected
@cluckj Thx bunches. I don't know how much longer I can hold my breath! LOL
Scott Leibrand
@scottleibrand
Aug 04 2018 04:03 UTC
@cluckj we‘ll need to figure out how to do ccprog with dev on non-enlite setups. Maybe add a mraa install step to the ccprog directions in the docs? Or maybe go back to always installing it?
naboull1
@naboull1
Aug 04 2018 07:37 UTC

when installing openaps which option should we use for this it seems new

Explorer Board HAT detected.
Would you like to [D]ownload precompiled Go pump communication library or build them from [S]ource? [D]/S s

naboull1
@naboull1
Aug 04 2018 08:14 UTC
@scottleibrand just done a fresh install. which command line can show me what the oref0 version is?
Arnoud82
@Arnoud82
Aug 04 2018 09:05 UTC
Can ayone help me, just done a fresh install on my pi zero with the explorer board. But it dosn't upload my mdt to nightscout, i have done the openaps frist-upload like i always did on the older dev but now it says the commando is unknown.
iValkou
@iValkou
Aug 04 2018 10:42 UTC
How to use Explorer HAT screen menu? There are only 2 buttons. How to choose an option?
iValkou
@iValkou
Aug 04 2018 10:51 UTC
I found. double click
JohnDoeAkira
@JohnDoeAkira
Aug 04 2018 14:59 UTC
Does anybody uses Pancreable here ? I have tried to install it ... in vain.
naboull1
@naboull1
Aug 04 2018 16:19 UTC
anyone gets hanging when trying to setup oref0
i changed the option from xdrip to MDT and its installing mraa now but getting stuck when running oref0 setup
it hands when i reaches addings openaps log shortcuts
Arnoud82
@Arnoud82
Aug 04 2018 17:13 UTC

Last login: Sat Aug 4 16:56:49 2018 from 192.168.0.108

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
root@NoudsKlier:~# cd myopenaps
root@NoudsKlier:~/myopenaps# openaps first-upload
[Errno 2] No such file or directory
openaps: 'first-upload' is not an openaps command. See 'openaps --help'.

root@NoudsKlier:~/myopenaps# openaps first-upload

Dana Lewis
@danamlewis
Aug 04 2018 17:14 UTC
@Arnoud82 are you using dev or master?
@naboull1 top of this page describes how to check your version: http://openaps.readthedocs.io/en/latest/docs/Customize-Iterate/update-your-rig.html
Arnoud82
@Arnoud82
Aug 04 2018 18:32 UTC

Last login: Sat Aug 4 18:29:03 2018 from 192.168.0.108

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
root@NoudsKlier:~# npm list -g oref0
(node:2826) [DEP0022] DeprecationWarning: os.tmpDir() is deprecated. Use os.tmpdir() instead.
/usr/local/lib
└── (empty)

npm ERR! not ok code 1
root@NoudsKlier:~#

Last login: Sat Aug 4 18:29:03 2018 from 192.168.0.108

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
root@NoudsKlier:~# npm list -g oref0
(node:2826) [DEP0022] DeprecationWarning: os.tmpDir() is deprecated. Use os.tmpdir() instead.
/usr/local/lib
└── (empty)

npm ERR! not ok code 1
root@NoudsKlier:~# cd ~/src/oref0
root@NoudsKlier:~/src/oref0# git branch

Scott Leibrand
@scottleibrand
Aug 04 2018 18:38 UTC
@naboull1 the [] indicate the default option, which is selected automatically if you just press enter. If that’s not obvious, it might make sense to PR in a message at the top of the interactive setup that explains that.
Did you install from master or dev?
Dana Lewis
@danamlewis
Aug 04 2018 18:38 UTC
@cluckj do you know if OpenAPS first-upload was added to Go, or if not because not needed, what else @Arnoud82 should try? ^
Jon Cluck
@cluckj
Aug 04 2018 18:51 UTC
@Arnoud82 is it looping and not uploading?
Arnoud82
@Arnoud82
Aug 04 2018 18:57 UTC
It is looping great
@cluckj I only don't get my bloodsuger in nightscout
Arnoud82
@Arnoud82
Aug 04 2018 19:06 UTC

@cluckj Last login: Sat Aug 4 20:29:56 2018 from 192.168.0.108

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
root@NoudsKlier:~# l
Warning: clock input Invalid Date is unzoned; please pass clock-zoned.json instead
refreshed: {"carbs":96,"nsCarbs":96,"bwCarbs":0,"journalCarbs":0,"mealCOB":18,"currentDeviation":-12,"maxDeviation":0.74,"minDeviation":-8.67,"slopeFromMaxDeviation":-2.469,"slopeFromMinDeviation":0,"allDeviations":[-9,-6,-1,1],"lastCarbTime":1533402282000,"bwFound":false}
Listening for 3 s silence: Listening: .No interfering pump comms detected from other rigs (this is a good thing!)
Continuing oref0-pump-loop at Sat 4 Aug 20:47:34 CEST 2018

Checking pump clock: "2018-08-04T20:47:34+02:00" is within 90s of current time: 2018-08-04T20:47:36+0200
Temp refreshed: monitor/temp_basal.json: {"duration":113,"temp":"absolute","rate":0}
{"carbs":96,"nsCarbs":96,"bwCarbs":0,"journalCarbs":0,"mealCOB":18,"currentDeviation":-12,"maxDeviation":0.74,"minDeviation":-8.67,"slopeFromMaxDeviation":-2.469,"slopeFromMinDeviation":0,"allDeviations":[-9,-6,-1,1],"lastCarbTime":1533402282000,"bwFound":false}
Warning: Autotune has not been run. All microboluses will be disabled until you manually run autotune or add it to run nightly in your loop.
{"carbs":96,"nsCarbs":96,"bwCarbs":0,"journalCarbs":0,"mealCOB":18,"currentDeviation":-12,"maxDeviation":0.74,"minDeviation":-8.67,"slopeFromMaxDeviation":-2.469,"slopeFromMinDeviation":0,"allDeviations":[-9,-6,-1,1],"lastCarbTime":1533402282000,"bwFound":false}
{"iob":2.985,"activity":0.0301,"basaliob":0.543,"bolusiob":2.442,"netbasalinsulin":1.55,"bolusinsulin":9.2,"time":"2018-08-04T18:47:36.000Z","iobWithZeroTemp":{"iob":2.985,"activity":0.0301,"basaliob":0.543,"bolusiob":2.442,"netbasalinsulin":1.55,"bolusinsulin":9.2,"time":"2018-08-04T18:47:36.000Z"},"lastBolusTime":1533405081000,"lastTemp":{"rate":0,"timestamp":"2018-08-04T20:39:46+02:00","started_at":"2018-08-04T18:39:46.000Z","date":1533407986000,"duration":8.83}}
{"delta":-14,"glucose":184,"noise":null,"short_avgdelta":-12.33,"long_avgdelta":-7.02,"date":1533408060000,"last_cal":0}
Autosens ratio: 1; Basal unchanged: 0.75; ISF unchanged: 72; CR: 9.5
currenttemp: { duration: 113, temp: 'absolute', rate: 0 } lastTempAge: 9 m tempModulus: 2 m
SMB disabled (!microBolusAllowed)
Last carbs 104 minutes ago; remainingCATime: 5.6 hours; 81% carbs absorbed
Carb Impact: -3.2 mg/dL per 5m; CI Duration: 0 hours; remaining CI (~2h peak): 4.1 mg/dL per 5m
predCIs (mg/dL/5m): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
remainingCIs: 0 0 0 0 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 3 3 3 3 3 3 3 3 2 2
UAM Impact: -3.2 mg/dL per 5m; UAM Duration: 0 hours
minPredBG: 25 minIOBPredBG: 39 minZTGuardBG: 25 minCOBPredBG: 39 minUAMPredBG: 39 avgPredBG: 25 COB: 18 / 96
BG projected to remain above 4.9 for 45 minutes
BG projected to remain above 3.6 for 65 minutes
naive_eventualBG: -31 bgUndershoot: 104 zeroTempDuration: 65 zeroTempEffect: 59 carbsReq: 6
2018-08-04T18:48:31.485Z
Checking deliverAt: 2018-08-04T18:48:31.485Z is within 1m of current time: Sat 4 Aug 20:48:32 CEST 2018
and that smb-suggested.json is less than 1m old
enact/smb-suggested.json: {"temp":"absolute","bg":184,"tick":-14,"eventualBG":59,"insulinReq":0,"reservoir":"110.55\n","deliverAt":"2018-08-04T18:48:31.485Z","sensitivityRatio":1,"COB":18,"IOB":2.985}
"COB: 18, Dev: 1.3, BGI: -0.6, ISF: 4.0, CR: 9.5, Target: 4.9, minPredBG 1.4, minGuardBG -2.2, IOBpredBG 2.2, COBpredBG 3.3, UAMpredBG 2.2; minGuardBG -2.2<3.6 113m left and 0 ~ req 0U/hr: no temp required"
COB: [184,170,157,145,133,122,112,102,93,85,78,71,66,60,55,50,45,41,39,39,39,39,39,39,39,39,39,39,39,39,39,39,39,39,39,39,39,39,39,40,42,45,47,50,52,54,57,59]
UAM: [184,170,157,144,132,120,109,99,89,80,71,64,56

@cluckj this is how my log looks
Jon Cluck
@cluckj
Aug 04 2018 19:09 UTC
Thanks, what about your NS loop log?
(I'm on mobile right now, so I may not respond immediately)
Arnoud82
@Arnoud82
Aug 04 2018 19:11 UTC
Where can i find that?
Scott Leibrand
@scottleibrand
Aug 04 2018 19:11 UTC
The problem is that if there’s no BG in NS the most-recent check fails, so it can’t upload. The workaround has always been openaps first-upload, which just uploads the current BG.
Jon Cluck
@cluckj
Aug 04 2018 19:12 UTC
Ah okay
Scott Leibrand
@scottleibrand
Aug 04 2018 19:12 UTC
It would be better if we made oref0-ns-loop autodetect the failure and do so automatically.
Dana Lewis
@danamlewis
Aug 04 2018 19:18 UTC
^ yeppp
Jon Cluck
@cluckj
Aug 04 2018 19:18 UTC
It looks like first-upload was removed in the refactor and replaced with.... something
@Arnoud82 ns-looplog
Arnoud82
@Arnoud82
Aug 04 2018 19:21 UTC

Last login: Sat Aug 4 20:58:49 2018 from 192.168.0.108

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
root@NoudsKlier:~# ns-looplog
No recent valid BG found. Most recent:
{"glucose":152,"dateString":"2018-08-04T08:42:00+02:00"}
20:51:52 up 29 min 0 users load average: 5.05 4.13 3.62
Load high at Sat 4 Aug 20:51:52 CEST 2018: waiting up to 5m to continue

Starting oref0-ns-loop at Sat 4 Aug 20:52:04 CEST 2018:
No recent valid BG found. Most recent:
{"glucose":152,"dateString":"2018-08-04T08:42:00+02:00"}
20:52:51 up 30 min 0 users load average: 7.90 5.12 4.00
Load high at Sat 4 Aug 20:52:52 CEST 2018: waiting up to 5m to continue

Starting oref0-ns-loop at Sat 4 Aug 20:53:04 CEST 2018:
No recent valid BG found. Most recent:
{"glucose":152,"dateString":"2018-08-04T08:42:00+02:00"}
20:53:51 up 31 min 0 users load average: 4.90 4.82 3.97
Load high at Sat 4 Aug 20:53:51 CEST 2018: waiting up to 5m to continue

Starting oref0-ns-loop at Sat 4 Aug 20:54:03 CEST 2018:
No recent valid BG found. Most recent:
{"glucose":152,"dateString":"2018-08-04T08:42:00+02:00"}
Latest NS temptargets: (NOT VALID JSON: empty)
Merging local temptargets: (NOT VALID JSON: empty)
Temptargets merged: (NOT VALID JSON: empty)
Refreshed carbhistory; COB: 17
{"batteryVoltage":4040,"battery":91}
{"BG":172,"IOB":2.658,"rate":0,"duration":120,"units":null}
No new treatments to upload
Completed oref0-ns-loop at Sat 4 Aug 20:57:54 CEST 2018

Starting oref0-ns-loop at Sat 4 Aug 20:58:04 CEST 2018:
No recent valid BG found. Most recent:
{"glucose":152,"dateString":"2018-08-04T08:42:00+02:00"}
Latest NS temptargets: (NOT VALID JSON: empty)
Merging local temptargets: (NOT VALID JSON: empty)
Temptargets merged: (NOT VALID JSON: empty)
Refreshed carbhistory; COB: 16
{"batteryVoltage":4070.0000000000005,"battery":94}
{"BG":172,"IOB":2.658,"rate":0,"duration":120,"units":null}
No new treatments to upload
Completed oref0-ns-loop at Sat 4 Aug 21:02:00 CEST 2018

Starting oref0-ns-loop at Sat 4 Aug 21:02:04 CEST 2018:
No recent valid BG found. Most recent:
{"glucose":152,"dateString":"2018-08-04T08:42:00+02:00"}
Latest NS temptargets: (NOT VALID JSON: empty)
Merging local temptargets: (NOT VALID JSON: empty)
Temptargets merged: (NOT VALID JSON: empty)
Refreshed carbhistory; COB: 16
{"batteryVoltage":4090,"battery":95}
{"BG":null,"IOB":null,"rate":0,"duration":30,"units":null}
[{"duration":120,"raw_duration":{"timestamp":"2018-08-04T20:56:18+02:00","_type":"TempBasalDuration","duration (min)":120},"timestamp":"2018-08-04T20:56:18+02:00","absolute":0,"rate":0,"raw_rate":{"timestamp":"2018-08-04T20:56:18+02:00","_type":"TempBasal","temp":"absolute","rate":0},"eventType":"Temp Basal","medtronic":"mm://openaps/mm-format-ns-treatments/Temp Basal","created_at":"2018-08-04T20:56:18+02:00","enteredBy":"openaps://medtronic/754","_id":"5b65f9181c09a4292a9dd787"}]
Completed oref0-ns-loop at Sat 4 Aug 21:06:00 CEST 2018

Starting oref0-ns-loop at Sat 4 Aug 21:06:05 CEST 2018:
No recent valid BG found. Most recent:
{"glucose":152,"dateString":"2018-08-04T08:42:00+02:00"}
Latest NS temptargets: (NOT VALID JSON: empty)
Merging local temptargets: (NOT VALID JSON: empty)
Temptargets merged: (NOT VALID JSON: empty)
Refreshed carbhistory; COB: 14
{"batteryVoltage":4100,"battery":96}
{"BG":null,"IOB":null,"rate":0,"duration":30,"units":null}
No new treatments to upload
Completed oref0-ns-loop at Sat 4 Aug 21:10:02 CEST 2018

Starting oref0-ns-loop at Sat 4 Aug 21:10:05 CEST 2018:
No recent valid BG found. Most recent:
{"glucose":152,"dateString":"2018-08-04T08:42:00+02:00"}
21:10:48 up 48 min 1 user load average: 4.14 5.10 4.56
Load high at Sat 4 Aug 21:10:48 CEST 2018: waiting up to 5m to continue

Starting oref0-ns-loop at Sat 4 Aug 21:11:04 CEST 2018:
No recent valid BG found. Most recent:
{"glucose":152,"dateString":"2018-08-04T08:42:00+02:

Jon Cluck
@cluckj
Aug 04 2018 19:27 UTC
nope, hold on...
okay try this? cat monitor/glucose.json | json 1 > nightscout/recent-missing-entries.json && openaps report invoke nightscout/uploaded-entries.json
Arnoud82
@Arnoud82
Aug 04 2018 19:33 UTC
root@NoudsKlier:~# cat monitor/glucose.json | json 1 > nightscout/recent-missing-entries.json && openaps report invoke nightscout/uploaded-entries.json
-bash: nightscout/recent-missing-entries.json: No such file or directory
cat: monitor/glucose.json: No such file or directory
root@NoudsKlier:~#
Jon Cluck
@cluckj
Aug 04 2018 19:34 UTC
oh, you need to be in the myopenaps directory :)
cd myopenaps and try again
Arnoud82
@Arnoud82
Aug 04 2018 19:38 UTC

or directory
root@NoudsKlier:~# cd myopenaps
root@NoudsKlier:~/myopenaps# cat monitor/glucose.json | json 1 > nightscout/recent-missing-entries.json && openaps report invoke nightscout/uploaded-entries.json
ns://JSON/shell/nightscout/uploaded-entries.json
No JSON object could be decoded

Traceback (most recent call last):
File "/usr/local/bin/openaps-report", line 82, in <module>
app( )
File "/usr/local/lib/python2.7/dist-packages/openaps/cli/init.py", line 51, in call
self.run(self.args)
File "/usr/local/bin/openaps-report", line 75, in run
output = app(args, self)
File "/usr/local/lib/python2.7/dist-packages/openaps/cli/subcommand.py", line 52, in call
return self.method.main(args, app)
File "/usr/local/lib/python2.7/dist-packages/openaps/reports/invoke.py", line 48, in main
reporters.Reporter(report, device, task)(output)
File "/usr/local/lib/python2.7/dist-packages/openaps/reports/reporters/init.py", line 33, in call
self.blob = self.serialize(data)
File "/usr/local/lib/python2.7/dist-packages/openaps/reports/reporters/init.py", line 31, in serialize
return self.method.serialize(render(data), self)
File "/usr/local/lib/python2.7/dist-packages/openaps/vendors/process.py", line 56, in prerender_json
return json.loads(data)
File "/usr/lib/python2.7/json/init.py", line 339, in loads
return _default_decoder.decode(s)
File "/usr/lib/python2.7/json/decoder.py", line 364, in decode
obj, end = self.raw_decode(s, idx=_w(s, 0).end())
File "/usr/lib/python2.7/json/decoder.py", line 382, in raw_decode
raise ValueError("No JSON object could be decoded")
ValueError: No JSON object could be decoded
root@NoudsKlier:~/myopenaps#

Jon Cluck
@cluckj
Aug 04 2018 19:55 UTC
hmm
Jon Cluck
@cluckj
Aug 04 2018 20:27 UTC
ns-loop isn't recognizing that you're using an mdt cgm
I'll bbl
naboull1
@naboull1
Aug 04 2018 23:21 UTC

@scottleibrand
root@raspberrypi:~# npm list -g oref0
(node:29751) [DEP0022] DeprecationWarning: os.tmpDir() is deprecated. Use os.tmpdir() instead.
/usr/local/lib
└── oref0@0.6.2

root@raspberrypi:~# cd ~/src/oref0
root@raspberrypi:~/src/oref0# git branch
dev

  • master

@scottleibrand the position im in now after selecting MDT in setup and getting mraa installed i attempted to flash again from the instruction this is the outcome

root@raspberrypi:~# killall -g oref0-pump-loop; openaps mmtune
oref0-pump-loop: no process found
Not an openaps environment, run: openaps init
root@raspberrypi:~# sudo service cron stop && killall -g oref0-pump-loop && shutdown -c
oref0-pump-loop: no process found
root@raspberrypi:~# cd ~/src; git clone https://github.com/ps2/ccprog.git
fatal: destination path 'ccprog' already exists and is not an empty directory.
root@raspberrypi:~/src# cd ccprog; make ccprog
gcc -o ccprog ccprog.c readhex.c -lmraa
ccprog.c: In function 'main':
ccprog.c:777:18: warning: implicit declaration of function 'isprint' [-Wimplicit-function-declaration]
else if (isprint (optopt))
^~~
root@raspberrypi:~/src/ccprog# wget https://github.com/EnhancedRadioDevices/subg_rfspy/releases/download/v0.8-explorer/spi1_alt2_EDISON_EXPLORER_US_STDLOC.hex
--2018-08-05 09:11:37-- https://github.com/EnhancedRadioDevices/subg_rfspy/releases/download/v0.8-explorer/spi1_alt2_EDISON_EXPLORER_US_STDLOC.hex
Resolving github.com (github.com)... 192.30.255.112, 192.30.255.113
Connecting to github.com (github.com)|192.30.255.112|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location: https://github-production-release-asset-2e65be.s3.amazonaws.com/65105795/7a835ee6-9b89-11e6-87e1-8d31520ea103?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20180804%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20180804T231138Z&X-Amz-Expires=300&X-Amz-Signature=8a219f28c31c067618abb97756738e3ce17cd32f8adfc9c63727affc390c7f85&X-Amz-SignedHeaders=host&actor_id=0&response-content-disposition=attachment%3B%20filename%3Dspi1_alt2_EDISON_EXPLORER_US_STDLOC.hex&response-content-type=application%2Foctet-stream [following]
--2018-08-05 09:11:39-- https://github-production-release-asset-2e65be.s3.amazonaws.com/65105795/7a835ee6-9b89-11e6-87e1-8d31520ea103?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20180804%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20180804T231138Z&X-Amz-Expires=300&X-Amz-Signature=8a219f28c31c067618abb97756738e3ce17cd32f8adfc9c63727affc390c7f85&X-Amz-SignedHeaders=host&actor_id=0&response-content-disposition=attachment%3B%20filename%3Dspi1_alt2_EDISON_EXPLORER_US_STDLOC.hex&response-content-type=application%2Foctet-stream
Resolving github-production-release-asset-2e65be.s3.amazonaws.com (github-production-release-asset-2e65be.s3.amazonaws.com)... 52.216.163.51
Connecting to github-production-release-asset-2e65be.s3.amazonaws.com (github-production-release-asset-2e65be.s3.amazonaws.com)|52.216.163.51|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 6799 (6.6K) [application/octet-stream]
Saving to: 'spi1_alt2_EDISON_EXPLORER_US_STDLOC.hex'

spi1_alt2_EDISON_EXPLORER_US_STDLOC.hex 100%[===============================================================================================>] 6.64K 26.4KB/s in 0.3s

2018-08-05 09:11:40 (26.4 KB/s) - 'spi1_alt2_EDISON_EXPLORER_US_STDLOC.hex' saved [6799/6799]

root@raspberrypi:~/src/ccprog# ./ccprog -p 19,7,36 erase
Using pins: DC=19, DD=7, RESET=36
Erasing chip.
NOP failed!
Could not put device into debug mode.
Chip erase failed.
root@raspberrypi:~/src/ccprog# sudo service cron stop && killall -g oref0-pump-loop && shutdown -c
oref0-pump-loop: no process found
root@raspberrypi:~/src/ccprog# ./ccprog -p 19,7,36 erase
Using pins: DC=19, DD=7, RESET=36
Erasing chip.
NOP failed!
Could not put device into debug mode.
Chip erase failed.
root@raspberrypi:~/src/ccprog# ./ccprog -p 19,7,36 write spi1_alt2_EDISON_EXPLORER_US_STDLOC.hex
Using pins: DC=19, DD=7, RESET=36
NOP failed!
Could not put device into debug mode.

Jon Cluck
@cluckj
Aug 04 2018 23:34 UTC
@naboull1 those are the pins for the edison explorer, you want to use 16,18,7
naboull1
@naboull1
Aug 04 2018 23:37 UTC

so if i change it like this it should work?

/ccprog -p 16,18,7erase
,./ccprog -p 16,18,7 write spi1_alt2_EDISON_EXPLORER_US_STDLOC.hex

Jon Cluck
@cluckj
Aug 04 2018 23:38 UTC
let me make sure that's the right firmware, hold on :)
yep :thumbsup:
naboull1
@naboull1
Aug 04 2018 23:39 UTC
okay typing it now
Jon Cluck
@cluckj
Aug 04 2018 23:39 UTC
./ccprog -p 16,18,7 erase
./ccprog -p 16,18,7 write spi1_alt2_EDISON_EXPLORER_US_STDLOC.hex
naboull1
@naboull1
Aug 04 2018 23:43 UTC
root@raspberrypi:~/src/ccprog# ./ccprog -p 16,18,7 erase
Using pins: DC=16, DD=18, RESET=7
Erasing chip.
Chip erased.
root@raspberrypi:~/src/ccprog# ./ccprog -p 16,18,7 write spi1_alt2_EDISON_EXPLORER_US_STDLOC.hex
Using pins: DC=16, DD=18, RESET=7
Intel Hex file: spi1_alt2_EDISON_EXPLORER_US_STDLOC.hex
Writing 2769 bytes to flash....
root@raspberrypi:~/src/ccprog#
the lights turn off now :)
ill reboot and check if its working
Jon Cluck
@cluckj
Aug 04 2018 23:44 UTC
nice :D