These are chat archives for nightscout/intend-to-bolus

20th
Sep 2018
peterfulvi
@peterfulvi
Sep 20 2018 01:37
I dont know if this is the right forum but i will give it a shot. I want to set up a local offline host of nightscout based on @SandraK82 Repo. I already did it on a RPI 3. I was wondering if i could install it on different Inux platforms such as http://wiki.friendlyarm.com/wiki/index.php/NanoPC-T4 or http://nanopi.io/nanopi2-fire.html. I know it works on Raspian but i dont know if it will be a problem on Debia or Ubuntu, i dont know what the compatability limitations are between linux operating systems.
Jens Heuschkel
@juehv
Sep 20 2018 07:56
@live4sw I have to change every 5 to 6 days
Cas Eliëns
@cascer1
Sep 20 2018 08:48
I wait until the voltage drops below 1.20, pretty sure it's about once a week
Jens Heuschkel
@juehv
Sep 20 2018 10:44
I plan to try NiZn recharchable batteries. I think a good schedule would be to change together with reservoir :)
邓力凡
@denglfddd_twitter
Sep 20 2018 12:03
Just replaced the new edison, it seems that there are some problems, do I need to flash the intel official firmware again?
屏幕快照 2018-09-20 20.02.13.png
邓力凡
@denglfddd_twitter
Sep 20 2018 14:00
The problem has been solved
JohnDoeAkira
@JohnDoeAkira
Sep 20 2018 15:15
After having used my edison rig (enlite and 522) without uploading to ns during weeks, I connected to my nd server. All the basal changes are displayed but no bg measurements from my enlite cgm. Any idea what happened ?
Scott Leibrand
@scottleibrand
Sep 20 2018 15:25
Search the docs for first-upload
JohnDoeAkira
@JohnDoeAkira
Sep 20 2018 15:27
Thank you Scott. Now I remember. I already had this problem.
I did not notice that the recommendation was not only valid for the first upload but also after a long period of offline looping.
Benjamin Mammon
@bmammon
Sep 20 2018 16:34
My rig isn't staying connected to my Personal Hotspot. The blue bar keeps cutting in and out and I am not looping. I tried deleting logs and troubleshooting disk space issues but it's still not working. I'm using an iPhone 8 and latest dev
Dana Lewis
@danamlewis
Sep 20 2018 17:31
have you tried rebooting your phone? often issues like that are phone/bluetooth related
Scott Leibrand
@scottleibrand
Sep 20 2018 17:49
if that doesn't fix it, check /var/log/openaps/network.log
Wiper70
@Wiper70
Sep 20 2018 18:33
Edison rig with 522 MDT sensor: Next week I expect to have very little internet connection (biking to Berlin). Also I will not have my laptop with me, only my iPhone. My BT is working and I installed Terminus. But how can I set a higher target if NS is not working? In my pump? Or is there a Terminal command to do this?
Benjamin Mammon
@bmammon
Sep 20 2018 19:37
@danamlewis @scottleibrand i've tried it all but still getting the Personal Hotspot cutting in and out. Time to reflash.
Benjamin Mammon
@bmammon
Sep 20 2018 19:42
Are there any discussions about OpenAPS offline for iPhone users that I can join?? Maybe there could be some integration with Spike? Or even running oref1 with a RileyLink? There must be a better solution than this blue bar
Dana Lewis
@danamlewis
Sep 20 2018 19:44
What type of CGM?
There's oodles of offline options that don't involve hotspot
Wiper70
@Wiper70
Sep 20 2018 19:50
522 Enlite. Has anyone tried to set a higher target in your pump while excercising while offline? I also red the OpenAPS informatioin about "Hot Button" but I have an Iphone.
Benjamin Mammon
@bmammon
Sep 20 2018 19:51
G5 with Spike
Benjamin Mammon
@bmammon
Sep 20 2018 19:57
I understand xdrip-js could read my transmitter directly but then I wouldn't be able to see what my BG is offline unless I BT tether with the Personal Hotspot. Any other solutions that don't rely on Personal Hotspot?
Eric
@ecc1
Sep 20 2018 22:40
I've promoted the pre-release in my medtronic repo to "latest release" and pushed a new pre-release of the dexcom G4 repo that doesn't panic on out-of-order entries that can occur after time changes. I'll promote that one too once I hear that it's working OK