These are chat archives for nightscout/intend-to-bolus

22nd
Feb 2019
tepidjuice
@tepidjuice
Feb 22 00:41
@ecc1 thanks how do I build go with probe?
Eric
@ecc1
Feb 22 01:02
change to the cmd/probe subdirectory of the medtronic repo (wherever it was cloned to on your rig) and type "go build"
Zakm0n
@Zakm0n
Feb 22 02:10
So i'm on my 4th run putting openaps on this pi (i had another bad sd card) and every time it seems like something different didn't work.
the command line shortcuts don't work. setup didn't ask me to set passwords, apparently my hostname didn't stick this time because I can't connect with hostname.local, and now I can't even ssh with the IP address.
I'm redoing npm global install now because it didn't look like it finished
Zakm0n
@Zakm0n
Feb 22 02:21
ok, figured out why ssh was borked. (I didn't enable it)
Zakm0n
@Zakm0n
Feb 22 03:17
@cluckj new squeaky clean install from raspian lite, followed the instructions exactly as laid out above, still getting the same weird bluetooth thing going on
bluetoothd isn't installed in /usr/local/bin
Jon Cluck
@cluckj
Feb 22 03:24
on the pi, bluetooth is installed in /usr/sbin because raspbian has an updated/maintained version of bluetooth
Zakm0n
@Zakm0n
Feb 22 03:25
well that explains ALOT
Jon Cluck
@cluckj
Feb 22 03:25
if the bluetooth service is running, you can start from the part of the bluetooth docs where it says Now launch the Bluetooth control program: bluetoothctl
on the edison, the bluetooth package is super old and oref0-setup manually builds a fresh one :)
Zakm0n
@Zakm0n
Feb 22 03:27
just tried sudo /usr/local/sbin/bluetoothd --experimental & and got the same output. command not found
bluetoothctl returns waiting to connect to bluetoothd... and just sits there
Jon Cluck
@cluckj
Feb 22 03:29
if you did the killall bluetoothd command, the service has probably been killed
Zakm0n
@Zakm0n
Feb 22 03:29
derp
forgot to get rid of local in that path
looks good now
Zakm0n
@Zakm0n
Feb 22 03:37
AWESOME. It's all working. So it should automatically jump to BT when my primary network isn't around?
Jon Cluck
@cluckj
Feb 22 03:49
did you set it up with network-manager or the stock oref0-online stuff?
Zakm0n
@Zakm0n
Feb 22 03:58
network manager
Jon Cluck
@cluckj
Feb 22 03:58
it'll keep a tether all the time, and prefer wifi when it's available
Zakm0n
@Zakm0n
Feb 22 04:02
So it'll drop BT in the presence of wifi?
was:nmcli c m <mywifissid> connection.autoconnect yes
correct?
Jon Cluck
@cluckj
Feb 22 04:04
it won't drop BT as long as it's available
Zakm0n
@Zakm0n
Feb 22 04:05
Well I'm connected to BT and Wifi right now lol
Is it possible to make it connect to BT only when wifi isn't available?
Scott Leibrand
@scottleibrand
Feb 22 04:13
That’s what oref0-online does.
Eric
@ecc1
Feb 22 04:13
You can set the connection priority setting with nmcli con mod CONN-NAME connection.autoconnect-priority NNN (tab completion works, too)
if you make wifi's priority higher, it will be preferred
then network-manager will take care of it all itself
Zakm0n
@Zakm0n
Feb 22 04:16
so....
mcli con mod WIFI connection.autoconnect-priority 1
mcli con mod BT connection.autoconnect-priority NNN
well, the NNN as 2
Scott Leibrand
@scottleibrand
Feb 22 04:29
Yeah, if you don’t mind having the BT link always on, and just unused, that would work well.
The main reason we haven’t done so is that we haven’t figured out a way to programmatically set it up without stepping on our own air hose and killing network while doing so.
Zakm0n
@Zakm0n
Feb 22 04:31
So It'll stay connected to BT the entire time, and only route traffic there if no wifi is present?
If that is the case, why is network manager any better than oref0-online?
Zakm0n
@Zakm0n
Feb 22 04:42
Also, last question. Is it possible to set a default screen? I'd love to be able to have the big bg status screen stay on
straykatz
@straykatz
Feb 22 04:44
Hey hey, I need some help. It's probably written somewhere .feel free to point me there. Please be gentle, I am foggy and slow today.. 1) How do I set up my brand-new-today Dexcom G6 to run with OpenAPS? (e.g. do I select X-drip or something during set-up?) 2) How do I offline loop with the G6? @danamlewis or @scottleibrand mentioned it when we saw each other, did I misunderstand? Thank you kindly.
Any guidance (do this first, this second) - I would appreciate them.
Eric
@ecc1
Feb 22 05:01
@Zakm0n I think the main advantage of network-manager is that it is more responsive -- it listens for low-level events about network interfaces coming and going, rather than polling the network status using user-level commands in a shell script. But keeping the BT PAN connection up all the time is a problem for iPhones I think? I've been using it with Android for over a year now though
Scott Leibrand
@scottleibrand
Feb 22 05:20
iPhone X only displays a blue bubble in the top left, but non-notched iPhones display an entire big blue bar across the top, and it disables the tap to go to the top of the page gesture.
@straykatz I think you need xdrip-js to loop offline with G6.
straykatz
@straykatz
Feb 22 05:27
Ah, thank you, Scott. How about Spike?
Scott Leibrand
@scottleibrand
Feb 22 05:43
Or that, yes.
tepidjuice
@tepidjuice
Feb 22 05:47
@ecc1 there is not medtronic repo only directory I have is the /root/go directory with bin has a sub-directory and there doesn't seem to be a probe command anywhere (have used locate)
tepidjuice
@tepidjuice
Feb 22 07:58
@ecc1 so I've run git clone https://github.com/ecc1/medtronic on my rig and there is no probe subdirectory there either also the command go is not found....
Quite lost at this point. I assumed running go would be like python. If it's installed it should either execute the script or open a shell?
Jens Heuschkel
@juehv
Feb 22 10:03
Hey Guys! I'm searching for a new CGM since enlite got discontinued. My current favorite ist the g6. The documentation sais it's just possible over online connection. But I saw xdrip should support it already. Do you guys know if I need something else than xdrip to use the g6 (e.g. to start the sensor or for calibration or whatever)?
Luke Gooding
@formlessperform_twitter
Feb 22 11:12
image.png
Hi All, can anyone help with this. We want to run the aps first-upload command after being offline for a few days, it ask us to enter openaps init but his doesn't seem to do anything. We have all device near each other with a fresh battery.
straykatz
@straykatz
Feb 22 11:31
@formlessperform_twitter cd myopenaps :)
aka - run it in the directory where your openAPS lives
Luke Gooding
@formlessperform_twitter
Feb 22 11:38
@straykatz :) worked!. Thanks Mate. I knew it would be simple. Much appreciated.
arvindagarwallibre
@arvindagarwallibre
Feb 22 12:01
Can anyone please tell me the length of pi HAT Antenna for medtronic WW pumps? I accidentally bought the antenna for NA pumps. Silver exposed part on current antenna is 82 mm which I believe is for 915MHz. How much should it be for 868MHz?
straykatz
@straykatz
Feb 22 12:03
cool:)
straykatz
@straykatz
Feb 22 12:54

I think something broke recently ... go binaries ...:
Downloading Go pump binaries from:
wget: missing URL
Usage: wget [OPTION]... [URL]...

Try `wget --help' for more options.
xz: (stdin): File format not recognized
tar: Child returned status 1
tar: Error is not recoverable: exiting now
Couldn't download and extract Go pump binaries

that's a HELP NEEDED
Or perhaps and likely an ISSUE. but I also need help. :-o
Jon Cluck
@cluckj
Feb 22 13:26
@Zakm0n yeah, if you add "status_screen": "bigbgstatus" to your preferences it'll do that
@juehv xdrip+ can take care of everything, and if it doesn't the official dexcom android app can
Jens Heuschkel
@juehv
Feb 22 13:40
@cluckj I have two issues with the official dexcom app .. my phone is not listed as supported device (and they only list ridiculously expensive devices) and I bet they don't provide the values locally for offline looping ....
Jon Cluck
@cluckj
Feb 22 13:47
I meant as a backup :) the app is not very good
amspoke
@amspoke
Feb 22 14:53
Hi everyone. I would like to ask for some help. I'm starting with openaps and i have all the hardware in place, but i have a problem. I bought a 3800mah battery (3.7 1S) and i connect it to the pi and hat but it never gets charged, i have tried different chargers with different amps but no way to get it charged. Probably i'm missing something (i'm new to this). So any how could gimme some advice? thanks!
philipgo
@philipgo
Feb 22 15:20
@juehv xDrip used to be able to upload BG values via Bluetooth to OpenAPS rigs (xDripAPS). I have not used this function in a while, so can't say how reliable it is at the moment. There is a patched version of the Dexcom App ( https://github.com/dexcomapp/dexcomapp ) that removes the device check and broadcasts values to AAPS offline (and from there to xDrip if you like)
Andy Sharrow
@dramageek
Feb 22 15:26
@juehv xDrip will do everything with the G6, including silent restarts without needing to do anything else. You may need to use the Nightly/Alpha/Beta channel of the app- I'm not sure if it's made it all the way to stable yet, though I've been using it for 6 months and never seen a problem with it.
xDripAPS has been flaky, and I believe the plan is to replace it for offline looping and use xDrip's built-in webserver. See openaps/oref0#1139
Eric
@ecc1
Feb 22 16:01
@tepidjuice I think Go should be installed if you choose the "build from latest source" option when you set up your rig, but I'm not sure. Go is a compiled language, so you need to compile the programs before they can be executed. You can also cross-compile easily on a "bigger" machine if you prefer.
The probe directory is in the cc111x repo, sorry (under cmd/probe/ )
Zakm0n
@Zakm0n
Feb 22 16:13
So it seems every time I reconnect to my home network, I'm getting a different host name. It's like piaps-NN, is there a way to prevent that?
Jon Cluck
@cluckj
Feb 22 16:30
set it to be static on your router?
Scott Leibrand
@scottleibrand
Feb 22 18:15
Ebgineer
@Ebgineer
Feb 22 18:30
@amspoke I have heard of some batteries getting sent out with the +/- polarities reversed. Also some chargers won't start charging a lipo battery if the starting voltage is too low.
arvindagarwallibre
@arvindagarwallibre
Feb 22 18:58
@scottleibrand Thank you
amspoke
@amspoke
Feb 22 19:11
Thanks @Ebgineer , any schema on this to be sure?
straykatz
@straykatz
Feb 22 19:24
Good morning. I need help with this .. spent too many hours on retrying the same things yesterday without success. The same thing happened yesterday on two different chips. I updated oref0 - on Dev and even on a branch to check if it would be different - and go the fatal error indicating that the Go binaries link was missing.
here's what the log says:

I think something broke recently ... go binaries ...:
Downloading Go pump binaries from:
wget: missing URL
Usage: wget [OPTION]... [URL]...

Try `wget --help' for more options.
xz: (stdin): File format not recognized
tar: Child returned status 1
tar: Error is not recoverable: exiting now
Couldn't download and extract Go pump binaries

Ebgineer
@Ebgineer
Feb 22 19:31
normally the red wire would be + and black - You could verify if you have a multimeter. There's a closeup photo here http://legacy.gamebuino.com/wiki/images/a/ac/MAKERbuino-buildGuide-123.jpg
Raymond Richmond
@PedanticAvenger
Feb 22 20:09
@amspoke @Ebgineer Don't trust the color (but I agree "normally" is correct here). I melted an explorer board when I trusted the color and they were reversed. I always meter batteries now to be safe.
straykatz
@straykatz
Feb 22 20:22
@straykatz even this link, forget about above link to the issue 1208: https://github.com/openaps/oref0/issues/1208#issue-413552297
Jon Cluck
@cluckj
Feb 22 20:25
@straykatz did you use oref0-runagain?
straykatz
@straykatz
Feb 22 20:44
@cluckj I used runagain, I used run-it-from scratch ...
why would I get the error with the URL missing to the Go pump binaries - unless the URL was missing?
Jon Cluck
@cluckj
Feb 22 20:45
can you try it with the interactive setup script?
straykatz
@straykatz
Feb 22 20:46
I have done it at least 5 times eitehr way
that is what I mean by "run it from scratch" interactive setup
Jon Cluck
@cluckj
Feb 22 20:46
okay
straykatz
@straykatz
Feb 22 20:52
@cluckj I entered this as issue 1208: https://github.com/openaps/oref0/issues/1208#issue-413552297 with more information ... :)
Jon Cluck
@cluckj
Feb 22 20:53
the command it's running to get that url is some form of: curl -s https://api.github.com/repos/ecc1/medtronic/releases/latest | jq --raw-output '.assets[] | select(.name | contains("'arm-spi'")) | .browser_download_url'
can you try that manually and see what it returns?
straykatz
@straykatz
Feb 22 20:54
Thank you. How and where do I run the command? Root? does not matter?
Jon Cluck
@cluckj
Feb 22 20:54
nope, doesn't matter where you run it
it should tell you https://github.com/ecc1/medtronic/releases/download/v2019.01.21/medtronic-arm-spi.tar.xz
straykatz
@straykatz
Feb 22 20:58
it says ... nothing
root@blue:~# curl -s https://api.github.com/repos/ecc1/medtronic/releases/latest | jq --raw-output '.assets[] | select(.name | contains("'arm-spi'")) | .browser_download_url'
root@blue:~#
Jon Cluck
@cluckj
Feb 22 21:02
that's no good, what does just the first part do? curl -s https://api.github.com/repos/ecc1/medtronic/releases/latest
straykatz
@straykatz
Feb 22 21:07
Let me check. After dealing with this until 5 AM this morning, i appreciate the consistency in it not returning anything ;-)
last login: Fri Feb 22 11:41:36 2019 from katjas-macbook-pro.local
root@blue:~# curl -s https://api.github.com/repos/ecc1/medtronic/releases/latest
Segmentation fault
root@blue:~# curl -s https://api.github.com/repos/ecc1/medtronic/releases/latest
Segmentation fault
root@blue:~#
Does the url work for you?
Jon Cluck
@cluckj
Feb 22 21:12
yeah
straykatz
@straykatz
Feb 22 21:13
it does for me as well, just clicking on it. But not for the rig
Does it work from a rig for you?
Edison?
Explorer
Jon Cluck
@cluckj
Feb 22 21:17
yeah....curl shouldn't segfault though!
straykatz
@straykatz
Feb 22 21:18
Well, there is always reflash ... what gets me, is that this happens with 2 different Edisons. Same board though. I broke my backup board ... Have some in the mail. Could it be a Board issue at all?
Raymond Richmond
@PedanticAvenger
Feb 22 21:23
@straykatz It shouldn't be. The Wifi is on the Edison, nothing should be happening related to this on the explorer. Can you run curl against any other URL to see if it consistently segfaults?
Jon Cluck
@cluckj
Feb 22 21:25
^
straykatz
@straykatz
Feb 22 21:28
like this: root@blue:~# curl -s http://www.google.com
Segmentation fault
root@blue:~#
or did you have a specific kind of URL in mind, @PedanticAvenger?
Raymond Richmond
@PedanticAvenger
Feb 22 21:30
Nope, if you have a URL that returns just "Hello world" in plain text I suspect you will get the same thing. Something isn't right on your OS. curl be messed up.
straykatz
@straykatz
Feb 22 21:31
OS on the Edison?
On both of the Edisons?
Raymond Richmond
@PedanticAvenger
Feb 22 21:31
yes, or the curl install.
straykatz
@straykatz
Feb 22 21:31
what would cause something like that?
Raymond Richmond
@PedanticAvenger
Feb 22 21:32
I'm totally guessing here, what does just running curl without any parameters spit out?
straykatz
@straykatz
Feb 22 21:32
root@blue:~# curl
Segmentation fault
root@blue:~#
Raymond Richmond
@PedanticAvenger
Feb 22 21:33
yeah, investigation stops here. curl is broken.
straykatz
@straykatz
Feb 22 21:33
And what would the Tx be :)?
Raymond Richmond
@PedanticAvenger
Feb 22 21:33
maybe wrong version of curl got installed?
straykatz
@straykatz
Feb 22 21:33
treatment
Raymond Richmond
@PedanticAvenger
Feb 22 21:34
I haven't poked around enough lately to remember. is curl a base package or added later? if added later remove and re-install the package from repository.
straykatz
@straykatz
Feb 22 21:34
this is beyond my rudimentary understanding of coding to figure out ...
Raymond Richmond
@PedanticAvenger
Feb 22 21:34
might be able to do that anyway
straykatz
@straykatz
Feb 22 21:35
I am all eyes and fingers ... what would you suggest I tell my eddy?
Jon Cluck
@cluckj
Feb 22 21:35
apt-get install curl?
Raymond Richmond
@PedanticAvenger
Feb 22 21:36
after an apt-get remove curl?
let me get console and check that. ;)
straykatz
@straykatz
Feb 22 21:36
too late :) lets see what happens
Jon Cluck
@cluckj
Feb 22 21:36
lol
straykatz
@straykatz
Feb 22 21:37
great. I want to downgrade if the latest version keeps me up all night and stops me from looping :)
root@blue:~# apt-get install curl
Reading package lists... Done
Building dependency tree
Reading state information... Done
curl is already the newest version.
The following packages were automatically installed and are no longer required:
gyp javascript-common libc-ares-dev libc-ares2 libjs-jquery libjs-node-uuid libjs-underscore
libssl-dev libssl-doc libv8-3.14-dev libv8-3.14.5 node-abbrev node-ansi node-ansi-color-table
node-archy node-async node-block-stream node-combined-stream node-cookie-jar node-delayed-stream
node-forever-agent node-form-data node-fstream node-fstream-ignore node-github-url-from-git node-glob
node-graceful-fs node-gyp node-inherits node-ini node-json-stringify-safe node-lockfile node-lru-cache
node-mime node-minimatch node-mkdirp node-mute-stream node-node-uuid node-nopt
node-normalize-package-data node-npmlog node-once node-osenv node-qs node-read node-read-package-json
node-request node-retry node-rimraf node-semver node-sha node-sigmund node-slide node-tar
node-tunnel-agent node-underscore node-which
Use 'apt-get autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
root@blue:~#
OK< so .... apt-get remove curl now
Jon Cluck
@cluckj
Feb 22 21:38
it'd be ugly, but you can go into oref0-setup.sh and just put the url in where it needs it
straykatz
@straykatz
Feb 22 21:40
now that looks a lot more as I have come to expect from what you guys are saying:
{
  "url": "https://api.github.com/repos/ecc1/medtronic/releases/assets/10707920",
  "id": 10707920,
  "node_id": "MDEyOlJlbGVhc2VBc3NldDEwNzA3OTIw",
  "name": "medtronic-arm-uart.tar.xz",
  "label": null,
  "uploader": {
    "login": "ecc1",
    "id": 1545157,
    "node_id": "MDQ6VXNlcjE1NDUxNTc=",
    "avatar_url": "https://avatars0.githubusercontent.com/u/1545157?v=4",
    "gravatar_id": "",
    "url": "https://api.github.com/users/ecc1",
    "html_url": "https://github.com/ecc1",
    "followers_url": "https://api.github.com/users/ecc1/followers",
    "following_url": "https://api.github.com/users/ecc1/following{/other_user}",
    "gists_url": "https://api.github.com/users/ecc1/gists{/gist_id}",
    "starred_url": "https://api.github.com/users/ecc1/starred{/owner}{/repo}",
    "subscriptions_url": "https://api.github.com/users/ecc1/subscriptions",
    "organizations_url": "https://api.github.com/users/ecc1/orgs",
    "repos_url": "https://api.github.com/users/ecc1/repos",
    "events_url": "https://api.github.com/users/ecc1/events{/privacy}",
    "received_events_url": "https://api.github.com/users/ecc1/received_events",
    "type": "User",
    "site_admin": false
  },
  "content_type": "application/x-xz",
  "state": "uploaded",
  "size": 4580060,
  "download_count": 1,
  "created_at": "2019-01-21T19:22:11Z",
  "updated_at": "2019-01-21T19:22:12Z",
  "browser_download_url": "https://github.com/ecc1/medtronic/releases/download/v2019.01.21/medtronic-arm-uart.tar.xz"
}
],
"tarball_url": "https://api.github.com/repos/ecc1/medtronic/tarball/v2019.01.21",
"zipball_url": "https://api.github.com/repos/ecc1/medtronic/zipball/v2019.01.21",
"body": "Precompiled medtronic binaries for arm and 386 with CC111x radio attached via SPI or UART\r\n\r\nRelease notes\r\n* Handle mmol values in jq filter correctly"
}
Jon Cluck
@cluckj
Feb 22 21:40
:thumbsup:
give the interactive setup a whirl now
straykatz
@straykatz
Feb 22 21:41
OK - yep
while we are at it - any thoughts on what kind of CGM to specify with a G6 and Spike?
xdrip-js?
Jon Cluck
@cluckj
Feb 22 21:43
xdrip
straykatz
@straykatz
Feb 22 21:43
xdrip or -js?
Jon Cluck
@cluckj
Feb 22 21:44
just xdrip, not xdrip-js
straykatz
@straykatz
Feb 22 21:44
and why :)?
Jon Cluck
@cluckj
Feb 22 21:44
if you wanted to connect your sensor directly to your rig, you could use xdrip-js
straykatz
@straykatz
Feb 22 21:44
I do
Jon Cluck
@cluckj
Feb 22 21:44
but the transmitter can only be connected to one device at a time, and the changeover takes about a half hour
straykatz
@straykatz
Feb 22 21:44
I like offline looping. Is there a disadvantage?
device like?
Jon Cluck
@cluckj
Feb 22 21:45
the interface is less shiny than Spike :laughing:
device like a rig or cell phone
straykatz
@straykatz
Feb 22 21:45
Ah
OK, so if I use xdrip - can I offline loop?
xdrip as the sensor set up
Jon Cluck
@cluckj
Feb 22 21:48
if Spike can upload to multiple REST-API endpoints, you can send BG readings over a bluetooth tether to the rig
sorry I don't know if it does, though
straykatz
@straykatz
Feb 22 21:48
I don't use Android, but an iPhone 8 run-in iOS 12.1.4
I think I read something about that on the Spike App.
straykatz
@straykatz
Feb 22 21:55
thank you so far for the help with the curl problem, I am running interactive setup and will play with CGM options a bit!!
Jon Cluck
@cluckj
Feb 22 21:56
:thumbsup:
straykatz
@straykatz
Feb 22 21:57
Any thoughts on why curl was all broken? I was thinking some collateral damage during rocky setup runs, but what is strange, and probably precludes this, is that this happened on 2 chips.
Jon Cluck
@cluckj
Feb 22 21:58
nope; maybe a bad flash?
Raymond Richmond
@PedanticAvenger
Feb 22 21:58
Most of my theories approach tinfoil hat territory, but did you flash from a potentially corrupted image?
Maybe checksum the file and compare to source repository.
straykatz
@straykatz
Feb 22 21:59
seems the most likely reason ...
I think I am done diagnosing, and rather go to nuke and regrow :)
So, perhaps, a new image will do. What is so strange is that it worked before
The issue is, I don't know how to checksum the file and compare to source repository
straykatz
@straykatz
Feb 22 22:36
What do think about this, @cluckj and @PedanticAvenger?

UAM Impact: 8.9 mg/dL per 5m; UAM Duration: 1.4 hours
/home/.rootfs/usr/local/lib/node_modules/oref0/lib/determine-basal/determine-basal.js:697
avgPredBG = round( (1-fractionCarbsLeft)UAMpredBG + fractionCarbsLeftCOBpredBG );
^

ReferenceError: UAMpredBG is not defined
at determine_basal (/home/.rootfs/usr/local/lib/node_modules/oref0/lib/determine-basal/determine-basal.js:697:50)
at Object.<anonymous> (/home/.rootfs/usr/local/lib/node_modules/oref0/bin/oref0-determine-basal.js:215:14)
at Module._compile (module.js:653:30)
at Object.Module._extensions..js (module.js:664:10)
at Module.load (module.js:566:32)
at tryModuleLoad (module.js:506:12)
at Function.Module._load (module.js:498:3)
at Function.Module.runMain (module.js:694:10)
at startup (bootstrap_node.js:204:16)
at bootstrap_node.js:625:3
No deliverAt found.
Couldn't smb_verify_suggested
oref0-pump-loop failed.

Jon Cluck
@cluckj
Feb 22 22:44
are you on dev? that bug was fixed a couple weeks ago
straykatz
@straykatz
Feb 22 22:44
hmm.. let me check, I have switched so many times since last night :)
ah, yes - default-uam-as-basal
let me change that again
/home/.rootfs/usr/lib
└─┬ oref0@0.7.0-dev -> /root/src/oref0
└─┬ oref0@0.7.0-dev
└── oref0@0.7.0-dev deduped
straykatz
@straykatz
Feb 22 23:04
same thing after change to dev ...
root@blue:~/src/oref0# git branch
default-uam-as-basal
  • dev
    master
Or maybe the change did not stick?
ReferenceError: UAMpredBG is not defined
at determine_basal (/home/.rootfs/usr/local/lib/node_modules/oref0/lib/determine-basal/determine-basal.js:703:41)
at Object.<anonymous> (/home/.rootfs/usr/local/lib/node_modules/oref0/bin/oref0-determine-basal.js:215:14)
at Module._compile (module.js:653:30)
at Object.Module._extensions..js (module.js:664:10)
at Module.load (module.js:566:32)
at tryModuleLoad (module.js:506:12)
at Function.Module._load (module.js:498:3)
at Function.Module.runMain (module.js:694:10)
at startup (bootstrap_node.js:204:16)
at bootstrap_node.js:625:3
No deliverAt found.
Couldn't smb_verify_suggested
oref0-pump-loop failed. pump_loop_completed more than 15m old; waiting for 31 s silence before mmtuning
Listening for 31s: .No interfering pump comms detected from other rigs (this is a good thing!)
Continuing oref0-pump-loop at Fri Feb 22 15:03:48 PST 2019
Listening for 31 s silence before mmtuning: Listening for 31s: .No interfering pump comms detected from other rigs (this is a good thing!)
Continuing oref0-pump-loop at Fri Feb 22 15:04:20 PST 2019
mmtune: "916.600", 3, -78 -- "916.650", 3, -78
waiting for 36 second silence before continuing
Listening for 36s: .
Jon Cluck
@cluckj
Feb 22 23:06
you'll have to npm run global-install to get the changes to take effect
straykatz
@straykatz
Feb 22 23:10
i thought i did. Let's see if I run it again
straykatz
@straykatz
Feb 22 23:28
same thing
Eric
@ecc1
Feb 22 23:31
@cluckj might be less cryptic to first download github's release JSON and check that it's OK (nonzero size, maybe passes "jq . >/dev/null" with good exit status) before piping it to the script that extracts the tarball url. Gives a chance to warn the user that something's not right with their network connection to github etc.