These are chat archives for nightscout/intend-to-bolus

26th
Feb 2019
renegadeandy
@renegadeandy
Feb 26 00:44 UTC
@dougboss i also get this problem. Its very hit or miss on the edison on the network switching
Doug
@dougboss
Feb 26 02:51 UTC
At least I'm not the only one , maybe a Cron job to reboot every 4 hours
wfeddern
@wfeddern
Feb 26 02:55 UTC
so with my replacement pi HAT finally on the way, I made the mistake of letting my samsung S9+ update to android 9 (pie). Now I am only getting updates in xdrip+ when the phone screen is on. Have set everywhere I could find to make sure app is able to run in background and use data. Anyone have any suggestions on where else to look or settings in xdrip+ to try playing with? Have done a clear cache in android, and am running latest xdrip+ release. Going to try doing a full factory reset of phone tomorrow and reinstall things to see if that helps any.
Jon Cluck
@cluckj
Feb 26 03:03 UTC
@wfeddern I have battery saver and adaptive battery (in battery settings), and battery optimization (in the system settings for xdrip+) turned off
wfeddern
@wfeddern
Feb 26 03:06 UTC
@cluckj I had adaptive battery on of those. disabled now, let see how it goes
Jon Cluck
@cluckj
Feb 26 03:06 UTC
battery optimization is super buried
wfeddern
@wfeddern
Feb 26 03:14 UTC
@cluckj yeah, I was able to find that I think and remove xdrip app from the optimized list.
Jon Cluck
@cluckj
Feb 26 03:16 UTC
:thumbsup:
wfeddern
@wfeddern
Feb 26 03:22 UTC
still no luck :( must be missing something somewhere
I get a reading within a minute as soon as I unlock phone, so has to be related to the lock screen/sleep mode/power saving somehow.
Jon Cluck
@cluckj
Feb 26 03:26 UTC
ask in jamorham/xdrip-plus? folks there may know
I remember seeing something about samsung using an aggressive powersave
wfeddern
@wfeddern
Feb 26 03:45 UTC
@cluckj I think updating to the Jan 25 nightly release fixed things re: that thread you linked to above. Thanks a million
Matthew Yeager
@AmazingThew
Feb 26 03:48 UTC
Hey I'm trying to design a case for a Pi rig; are there CAD files/schematics/etc for the explorer hat anywhere? The schematics on github only diagram the electronics, not the physical shape of the board
Jon Cluck
@cluckj
Feb 26 03:57 UTC
awesome :D
NickFoley
@NickFoley
Feb 26 09:06 UTC
Hi Everyone. I am looking to build my first looping system. I have decided on AndroidAPS or OpenAPS. Does anyone have any good links describing the pros and cons of each?
th122
@th122
Feb 26 10:03 UTC
@NickFoley Not what you’ve asked for, but @Kdisimone did a writeup of (IOS-based) Loop vs OpenAPS. It’s excellent reading and gives an idea where different loop systems, while aware of each other and developed in parallel, might differ, and the impact those differences might have on everyday life.
Jan Schenk
@jansche
Feb 26 10:40 UTC
@NickFoley It's basically about what your pump options and device preferences are. If: you are in Europe and can get a Dana pump + like it as well, handling-wise, and are ok with an Android device, then you're probably easier with AndroidAPS AAPS). If: You're used to medtronic, go well with their cannulae and tape adhesive, prefer to use an iPhone, maybe still have a supported pump, then chances are high OpenAPS is better for you. -- You can't use AAPS with an iPhone. AAPS needs a pump that communicates with your phone, only a few (like Dana R or Dana RS, currently not available in the US) can do. For OpenAPS, you need a supported Minimed pump. Not all are.
@NickFoley both use the oref algorithm, so for your medical treatment, it's not like one would be better than the other.
Jan Schenk
@jansche
Feb 26 10:57 UTC
@scottleibrand Could the future-treatment-but-not-in-the-future date problem I experience be connected with this openaps/oref0#600 old issue? I updated Nightscout to 0.11.1 recently, but I can't tell, if the problem existed before. Probably yes, but it's only having impact with certain future treatment types (a.k.a making the NS website dysfunctional).
image.png
image.png
Martin Haeberli
@mhaeberli
Feb 26 21:44 UTC
@jansche FYI, we have had some luck deleting future records by hand from mongoLab via the Heroku Nightscout app link to mongoDB (in the Heroku console)
PieterGit
@PieterGit
Feb 26 21:49 UTC
@scottleibrand can you have a look at openaps/oref0#1176 when you have some time?
Scott Leibrand
@scottleibrand
Feb 26 21:58 UTC
will do, thx
PieterGit
@PieterGit
Feb 26 22:03 UTC
thx
Jan Schenk
@jansche
Feb 26 23:00 UTC
@mhaeberli the problem is that these entries aren't future entries. They are totally correct and shouldn't be identified as future events. Is love to dig deeper into this. Maybe a timezone issue, as I'm UTC+1 and the records are all max 1h in the future.
Riko L
@Ricco555
Feb 26 23:02 UTC
trying out the experimental pi zero + RFM69hcw , but cannot move past the radio issue:
mmtune: radio_locale = WW 2019/02/26 23:22:08 cannot connect to CC111x radio on /dev/spidev0.0 2019/02/26 23:22:08 cc111x: no response Usage: grep [OPTION]... PATTERN [FILE]... Try 'grep --help' for more information.
I realize from the help documentation that it could be soldering problem, but I've already tried several times and it looks ok to me. Looking at the pi, I've connected pin 16->G0, 17->Vin, 18->RST, 19->MOSI, 21->MISO, 23->SCL, 24->SS, 25->GND
Any pointers?
Jon Cluck
@cluckj
Feb 26 23:18 UTC
you've installed the cc111x library, you need the rfm69 one
Riko L
@Ricco555
Feb 26 23:27 UTC
well .. that might be the case . didn't install anything extra. when't through the openaps install procedure. Any special instructions?
Riko L
@Ricco555
Feb 26 23:38 UTC
In the interactive script I choose Rpi with HAT. was that the wrong one?
Scott Leibrand
@scottleibrand
Feb 26 23:39 UTC
the rfm69 is not an Explorer HAT
Riko L
@Ricco555
Feb 26 23:41 UTC
if I say no to Explorer HAT, the script asks for TTY port and does not move on
Are you using an Explorer Board? [Y]/n n
Are you using an Explorer HAT? [Y]/n n
Are you using mmeowlink (i.e. with a TI stick)? If not, press enter. If so, paste your full port address: it looks like "/dev/ttySOMETHING" without the quotes.
What is your TTY port? 
What is your TTY port? 
What is your TTY port?
I'm on dev branch.. any particular? Sorry, I'll probably need some guidance or at least a link as its not in the https://openaps.readthedocs.io/en/latest/docs/Build%20Your%20Rig/pi-install.html#switch-to-dev-branch-for-your-pi-hat
Jeremy Cunningham
@jpcunningh
Feb 26 23:50 UTC
The tty port if wired up like the radiofruit bonnet is /dev/spidev0.1