These are chat archives for nightscout/intend-to-bolus

2nd
May 2019
samueldemers2
@samueldemers2
May 02 00:01
@scottleibrand she is looking at it now.
zasteph
@zasteph
May 02 00:02
@scottleibrand 70-120%, in what conditions please? I know there is a setting of max basal, which it is used sometimes, and it's double than a "normal" basal rate; also 0 (zero) is used when bg is going down
Scott Leibrand
@scottleibrand
May 02 00:10
70% is the default autosens_min, and 120% the autosens_max, which are also used by autotune.
zasteph
@zasteph
May 02 00:11
where do I adjust the default range of 70-120%, please?
Scott Leibrand
@scottleibrand
May 02 00:11
Those aren’t limits on how high or low temp basals can be.
They’re just limits on how far from your pump settings autosens and autotune can adjust what the system thinks your regular basal rates and ratios are.
Search for those terms in the OpenAPS docs to read about how they work and how to adjust them if needed.
zasteph
@zasteph
May 02 00:12
thank you.
Scott Leibrand
@scottleibrand
May 02 00:13
And if you haven’t already, it might be informative to run autotune over several weeks worth of data to see what it recommends, and maybe adjust your pump settings accordingly.
zasteph
@zasteph
May 02 01:23
@scottleibrand I assume the documentation explains how to do that, right?
Raymond Richmond
@PedanticAvenger
May 02 01:54
@sulkaharo for the offline-xdrip branch (installed just fine anyway and so far everything else is working fine) is it the space separated REST target in xdrip to get the data to the rig? I'll test that tomorrow morning for me if that's the case. I've had xdrip configured but had misconfigurations in my rig for a while which prevented it fromworking.
Raymond Richmond
@PedanticAvenger
May 02 03:04
hmmm, seeing errors in ns-loop.log now
Starting oref0-ns-loop at Wed May 1 21:03:02 MDT 2019:
module.js:550
    throw err;
    ^

Error: Cannot find module 'network'
    at Function.Module._resolveFilename (module.js:548:15)
    at Function.Module._load (module.js:475:25)
    at Module.require (module.js:597:17)
    at require (internal/module.js:11:18)
    at Object.<anonymous> (/root/src/oref0/bin/oref0-get-ns-entries.js:27:15)
    at Module._compile (module.js:653:30)
    at Object.Module._extensions..js (module.js:664:10)
    at Module.load (module.js:566:32)
    at tryModuleLoad (module.js:506:12)
    at Function.Module._load (module.js:498:3)
happened after I moved to the offline-xdrip branch of dev
was working properly on dev prior to branch move.
LuminaryXion
@LuminaryXion
May 02 10:40
Hi! I've finally gotten a successful install (I believe) on my Raspberry Pi!
Unfortunately, after running the setup and checking all my preferences. it doesn't actually do anything. The log is never created, and thus is never updates.
I can navigate around on the hat screen though and see some updates. But it isn't showing my BG or anything else. Just the wifi connection.
Any advice?
@cluckj by the way, it started working when I tried a different card. :)
pmgauthier
@pmgauthier
May 02 18:15
Hi all. I've successfully flash an edison/explorer rig after much trial and error and swapping of cables, boards, computers... etc. Very happy about that, but hitting a roadblock on setup of oref0. I have wifi setup and am able to connect via usbserial and ssh to login. The initial bootstrap script completed successfully too. However, when I run the setup script I repeatedly get the following error, whether I ssh or usbserial into my edison rig:
Checking /root/myopenaps: /root/myopenaps initialized
/root/src/decocare/ already exists; pulling latest 0.1.0-dev
fatal: Not a git repository (or any of the parent directories): .git
Couldn't pull latest decocare 0.1.0-dev
Does anyone have any insight on how to fix this?
Scott Leibrand
@scottleibrand
May 02 18:55
try just removing that decocare directory and re-run setup
rm -rf /root/src/decocare/
pmgauthier
@pmgauthier
May 02 19:56
Thankyou @scottleibrand! It worked and first loop completed without further errors!!
Scott Leibrand
@scottleibrand
May 02 20:17
:+1:
LuminaryXion
@LuminaryXion
May 02 22:32
Any ideas for my above issue?
Scott Leibrand
@scottleibrand
May 02 22:39
did you set up cron?
crontab -l to see it
matrixbot
@matrixbot
May 02 22:57
viq Test message
viq
@viq
May 02 22:57
Ah, so matrix integration is finally working again