nightscout/intend-to-bolus

Discussions around DIY closed looping with #OpenAPS

old-square-eyes

@old-square-eyes

I have been struggling with stubborn highs on occasion, so I'm sure that's somehow related.

old-square-eyes

@old-square-eyes

Right now, 6 pm, low - 1U basal. No carb for hours.

old-square-eyes

@old-square-eyes

Now -1.65U

How can Autotune look back and think I need more basal?

Foxy7

@Foxy7

@old-square-eyes have you tried running the autotuneweb? I find it more readable than the rig output and I think useful to check one or two days of data verse a week.

We have autotune tuned off since her demand is huge for breakfast and then much smaller for the rest of the day, currently running 0.1 basal till lunchtime just to stop the rig giving any extra insulin before all the tail insulin kicks in.

garetis

@garetis

I've noticed if I connect my rig to my mobile wifi to go out and when I turn off that hotspot when I get home the rig doesn't get back on my home network. My process is to SSH into the rig with the hotspot to turn it off, then reboot it with the hotspot turned off for it to get back on my home network. I saw there were some grep commands to add to cron for people that forget to turn it off, but if I turn the hotspot off should the rig connect to the other available network automatically? I only have those two networks set up for now.

Foxy7

@Foxy7

@garetis yes it should revert to your home WiFi. I find that the Bluetooth tethering is better than using the WiFi hotspot. Using a Samsung phone and have an extra app to help the rig connect. Blue Car Tethering its called. I have found that BT doesn't work well when connecting to iPhone.

https://openaps.readthedocs.io/en/latest/docs/Customize-Iterate/bluetooth-tethering-edison.html?highlight=Bluetooth

old-square-eyes

@old-square-eyes

@Foxy7 does Blue Car Tethering work on Android 11? My understanding is all these auto tether apps no longer work.

@garetis I have the opposite problem, BT tether does not auto connect. And even if it does, the rig seems to fail to get a WAN connection. Rebooting the phone helps. Then I get a WAN after manually accepting the request post reboot.

The network reset cron script definitely helps though.

It seems to help when WiFi gets stuck... e. g. returning to known networks after being on BT tether, or roaming to phone WiFi hot-spot (for when tether fails me).

邓力凡

@denglfddd_twitter

rm -rf ~/go/bin/*
cd && ~/src/oref0/bin/oref0-setup.sh

go version go1.12.5 linux/386
Go already installed
GOROOT=/usr/local/go
export GOROOT
PATH=$PATH:/usr/local/go/bin:$GOROOT/bin:$GOPATH/bin
GOPATH=$HOME/go
export GOPATH
PATH=$PATH:/usr/local/go/bin:$GOROOT/bin:$GOPATH/bin
github.com/ecc1/medtronic (download)
github.com/ecc1/cc111x (download)
github.com/ecc1/gpio (download)
Fetching https://golang.org/x/sys/unix?go-get=1
https fetch failed: Get https://golang.org/x/sys/unix?go-get=1: dial tcp 216.239.37.1:443: i/o timeout
package golang.org/x/sys/unix: unrecognized import path "golang.org/x/sys/unix" (https fetch: Get https://golang.org/x/sys/unix?go-get=1: dial tcp 216.239.37.1:443: i/o timeout)
github.com/ecc1/spi (download)
github.com/ecc1/nightscout (download)
github.com/ecc1/radio (download)

cd /root/go/src/github.com/ecc1/radio; git pull --ff-only

fatal: unable to access 'https://github.com/ecc1/radio/': gnutls_handshake() failed: The TLS connection was non-properly terminated.
package github.com/ecc1/radio: exit status 1
github.com/ecc1/papertrail (download)

cd /root/go/src/github.com/ecc1/papertrail; git pull --ff-only

fatal: unable to access 'https://github.com/ecc1/papertrail/': gnutls_handshake() failed: The TLS connection was non-properly terminated.
package github.com/ecc1/papertrail: exit status 1
Couldn't go get medtronic

@jaybaron1 Is it my network problem?THX

jaybaron1

@jaybaron1

I've actually not seen that error before -- @ecc1 any idea why https fetch failed?

@Foxy7 does Blue Car Tethering work on Android 11? My understanding is all these auto tether apps no longer work.

I was unable to make this work on my Samsung S20+. I would love it if there was a workaround. I tried Secure Task, Tasker, and a few others. Nothing would allow permissions to access the BT Tether Toggle. Best I could figure out is how to turn WiFi off when I left the house -- I still have to enable it manually every time I leave the house.

邓力凡

@denglfddd_twitter

I tried to use the proxy service https://goproxy.io and it looks like a step forward

go version go1.12.5 linux/386
Go already installed
GOROOT=/usr/local/go
export GOROOT
PATH=$PATH:/usr/local/go/bin:$GOROOT/bin:$GOPATH/bin
GOPATH=$HOME/go
export GOPATH
PATH=$PATH:/usr/local/go/bin:$GOROOT/bin:$GOPATH/bin
Fetching https://goproxy.io/github.com/ecc1/medtronic/@v/list
go: finding github.com/ecc1/medtronic latest
Fetching https://goproxy.io/github.com/ecc1/medtronic/@latest
Fetching https://goproxy.io/github.com/ecc1/@v/list
Fetching https://goproxy.io/github.com/@v/list
go get github.com/ecc1/medtronic/...: malformed module path "github.com/ecc1/medtronic/...": double dot
Couldn't go get medtronic

Abigail Cember

@acember

@garetis To me this sounds like you might still have this update_config = 1 line:

I was just traveling and making extensive use of wifi hotspots, and then I came home from overseas and went back to my home network successfully - -without ever accessing the rig to mess with anything. I never succeeded at BT tethering (including trying and failing with Blue Car on my Samsung phone), but I was able to use two separate Android phones (I entered both hotspot names and passwords into the wifi config file ahead of time), one of which was on at all times -- but not necessarily the same one. So, I can vouch that this approach at least can work seamlessly for switching back and forth between networks.

Abigail Cember

@acember

Also, @old-square-eyes I was having a lot of trouble with autotune similar to what you describe until I started taking metformin. Not saying this is what you should do, but it's a magic drug IMH (and non-expert) O, and it largely eliminated the "stubborn highs" that were causing the rig to overdose me like crazy. In fact, looping in general worked way better for me once I re-sensitized my body to insulin. Just something to consider.

Foxy7

@Foxy7

@old-square-eyes our phone is an older Samsung S7 with Android 8 on. So I don't know.

jaybaron1

@jaybaron1

@Foxy7 @old-square-eyes it worked for me on an S9. Havent tested the 10.

garetis

@garetis

@acember Will give it a shot, thanks!

Last time I had a low reservoir I had a motor error. I assume due to an uncleared low reservoir warning while an SMB was trying to execute. Is this a known issue?

Dana Lewis

@danamlewis

Isn’t related, just a coincidence

garetis

@garetis

@danamlewis Thanks, it didn't happen last night so makes last time a curious oddity

Another quirk I'm seeing now is that when I'm trying to SSH I am having difficulty using the rig name. I just ran a Fing device scan and got the IP address and SSH'd that way with no issues. Is that common and should I expect SSH with IP address to be more reliable than using the rig name?

Eric

@ecc1

@garetis yes, IP address is always more reliable than DNS name, just less convenient. Whether the hostname is registered and found usually depends on how your local DHCP and DNS servers are configured, lots of ways that can fail

Foxy7

@Foxy7

@garetis i can only ssh using the ip address, the rig name has never worked

Scott Leibrand

@scottleibrand

@Foxy7 if you have a PC, make sure you have iTunes installed: it comes with a network service called "Bonjour" that does multicast DNS discovery on the local LAN.

Foxy7

@Foxy7

@scottleibrand thanks will take a look tomorrow.

Tom Boudreau

@tomasboudr

hi folks... I'm doing a new install on an edison (after not doing one for some time) and I run into an error during the setupscript.

Removing any existing ns device:
Running nightscout autoconfigure-device-crud https://tomns.herokuapp.com REMOVED
Traceback (most recent call last):
  File "/usr/local/bin/openaps-device", line 35, in <module>
    app( )
  File "/usr/local/lib/python2.7/dist-packages/openaps/cli/__init__.py", line 47, in __call__
    self.configure_parser(self.parser)
  File "/usr/local/bin/openaps-device", line 21, in configure_parser
    self.commands = devices.configure_commands(parser, parent=self)
  File "/usr/local/lib/python2.7/dist-packages/openaps/devices/__init__.py", line 36, in configure_commands
    parent.devices = get_device_map(parent.config)
  File "/usr/local/lib/python2.7/dist-packages/openaps/devices/__init__.py", line 21, in get_device_map
    for device in Device.FromConfig(vendors, conf):
  File "/usr/local/lib/python2.7/dist-packages/openaps/devices/device.py", line 77, in FromConfig
    vendor = vendors.lookup(config.get(candidate, 'vendor').split('.').pop( ), config)
  File "/usr/local/lib/python2.7/dist-packages/openaps/vendors/__init__.py", line 27, in lookup
    return get_map(config)[name]
  File "/usr/local/lib/python2.7/dist-packages/openaps/vendors/__init__.py", line 22, in get_map
    vendors = all_vendors(config)
  File "/usr/local/lib/python2.7/dist-packages/openaps/vendors/__init__.py", line 36, in all_vendors
    return get_vendors( ) + find_plugins(config)
  File "/usr/local/lib/python2.7/dist-packages/openaps/vendors/__init__.py", line 16, in find_plugins
    return [ v.get_module( ) for v in vendors ]
  File "/usr/local/lib/python2.7/dist-packages/openaps/vendors/plugins/vendor.py", line 19, in get_module
    return importlib.import_module(self.name)
  File "/usr/lib/python2.7/importlib/__init__.py", line 37, in import_module
    __import__(name)
  File "/usr/local/lib/python2.7/dist-packages/openapscontrib/timezones/__init__.py", line 132, in <module>
    import recurrent
  File "/usr/local/lib/python2.7/dist-packages/recurrent/__init__.py", line 1, in <module>
    from recurrent.event_parser import RecurringEvent
  File "/usr/local/lib/python2.7/dist-packages/recurrent/event_parser.py", line 11, in <module>
    pdt = parsedatetime.Calendar()
  File "/usr/local/lib/python2.7/dist-packages/parsedatetime/__init__.py", line 270, in __init__
    self.ptc = Constants()
  File "/usr/local/lib/python2.7/dist-packages/parsedatetime/__init__.py", line 2381, in __init__
    self.locale = get_icu(self.localeID)
  File "/usr/local/lib/python2.7/dist-packages/parsedatetime/pdt_locales/icu.py", line 56, in get_icu
    result['icu'] = icu = pyicu.Locale(locale)
AttributeError: 'module' object has no attribute 'Locale'

looking to have a third edison so I can have a travel one and 2 for my other floors of my house

Tom Boudreau

@tomasboudr

for folks in the future I got this to work by manually installing using the dev branch

Tyler Duncan

@yduncan

@tomasboudr Could you tell me if this was with a Pi or an Edison?

Guim Kwon

@guimkwon

@garetis Is your pi Hat rig working now? Mine still does not loop. What are the key things that I can try? Please let me know.

Dave Acklam

@dcacklam

Anyone have any input on the Edison self-rebooting constantly even with watchdog turned off?
I have about 6 edisons, and ~3 explorer boards. Also 2 'Intel brand' Edison dev boards....
After a few years of using OpenAPS heavily, I cannot get any of the edison/explorer rigs to stay booted up reliably while using an explorer board. Results are better with the Intel provided dev boards but that does no good for OpenAPS purposes.

I'm wondering if anyone has noticed issues with the Explorers power components 'wearing out' or anything similar that would cause reboot-looping?

I also have a Pi4-based 'desktop' rig that does not exhibit this behavior, so I doubt it's the OpenAPS software itself

Dave Acklam

@dcacklam

@tomasboudr The various 'Big' Raspberri Pi devices tend to work better as permanent rigs, at least in my experience. This especially holds true for the RP4 which has EMMC & thus doesn't chew through SDcards like a hungry dog through bones....

@tomasboudr
Then again, I am having a hell of a time with my edison rig right now....

Tyler Duncan

@yduncan

Me too.

Foxy7

@Foxy7

@tomasboudr that error is the python issue from last summer, Dev is the best way to install. For further details:
openaps/oref0#1377

Dirceu Semighini Filho

@dirceusemighini

Hello guys, I joined here from the openaps docs and I'm not sure if here is the best place do discuss my doubts. I've one doubt about the algorithm, and another one about the configs.

About the configs I'm in doubt on how to define max_daily_safety_multiplier, as my max basal rate /h is 0.9, multipying it by 3 I got 2.7. With that I'll never receive a basal increase with that iob. The problem is that if I miss anything in my meals, it doesn't apply a basal increase and the bg go to hi. I'm not sure if this is common to other people, or if this is somesafety thing that can be adjusted

usually I got 5 to 7 ui per meal, this config make me think that my rates may be too wrong.

Where communities thrive

People

Repo info

Activity

cd /root/go/src/github.com/ecc1/radio; git pull --ff-only

cd /root/go/src/github.com/ecc1/papertrail; git pull --ff-only