Where communities thrive


  • Join over 1.5M+ people
  • Join over 100K+ communities
  • Free without limits
  • Create your own community
People
Activity
    Pete Schwamb
    @ps2
    Is that a platform limit? (The one hour interval?)
    Pete
    @someoneAnyone
    yes. you have a budget for complication updates… its flexible but the only reliable interval I’ve found is 60mins
    if we have push notifications we could update via slient pushes but even that is rate limited
    Pete Schwamb
    @ps2
    I was figuring there was some iOS reason there were no good BG complications. Someone needs to poke apple in the eye with a pebble.
    Mikael Rinnetmäki
    @mrinnetmaki
    For my own use case, I'd really like an option to switch more frequent updates on and off. I could then have them on for certain parts of the day (when I feel it's more important for me to get the complication updates), even if I'd eventually run out of quota.
    Pete
    @someoneAnyone
    @mrinnetmaki i thought about something similar, but didn’t have a good way to deal with it in UI.
    plus i never found way to figure out what the budget was.
    Pete
    @someoneAnyone
    Are there any developers in this room going to WWDC?
    Martin Haeberli
    @mhaeberli
    a) with xDrip, we used to see calibrations; b) with Dexcom Share, we don’t. Also, we sometimes get dropped connections between the G4 Platinum and the iOS Share phone; I wish the Share app would automatically reconnect ...
    Jeremy M Lucas (GetRileyLink.org)
    @jlucasvt
    All, I wanted to announce that the RileyLink Order Site is up and running. We will be taking preorders for RileyLinks starting today and plan on shipping July 10. https://getrileylink.azurewebsites.net/. Please forward this on to those that may want to get an order in.
    savelik
    @savelik
    @jlucasvt, Jeremy - will that replace the USB stick that talks to the pump? You can probably switch from Raspberry to Edison or run everything off an iphone (dexcom g5 + this), am I right? :)
    Jeremy M Lucas (GetRileyLink.org)
    @jlucasvt
    Yes primary use is phone app no need for Edison. Take a look at loudnate/Loop and LoopKit it's pretty amazing.
    Martin Haeberli
    @mhaeberli
    :+1:
    Jeremy M Lucas (GetRileyLink.org)
    @jlucasvt
    @mhaeberli yours is on the way.
    Martin Haeberli
    @mhaeberli
    :+1:
    Toby Canning
    @TC2013
    Does anyone know of an iOS xDrip?
    Martin Haeberli
    @mhaeberli
    @TC2013 iOS xDrip app is a frequent topic on other similar forums - see for example nightscout/dexdrip . We are advised it is feasible, but requires software. I’m also interested - trying to gather data from CGM but minimize extra devices carried, and sometimes Share seems to drop out. So at the moment, I believe there is none, but there is interest.
    Toby Canning
    @TC2013
    Thanks!
    Martin Haeberli
    @mhaeberli
    :+1:
    Johan Degraeve
    @JohanDegraeve
    I'm working on one , i plan to switch from Android to iphone soon: https://github.com/JohanDegraeve/iosxdripreader
    I hope to have basic features within a few weeks : receive data from x drip/xbridge, calculate bg (b ased on calibration) upload to nightscout.
    Kate Farnsworth
    @ELUTE
    @hackingtype1 has one but it is not quite ready yet. He has been focusing his efforts on the G5 android app for now
    Toby Canning
    @TC2013
    Wow! That's awesome!
    Martin Haeberli
    @mhaeberli
    @JohanDegraeve look forward to testing it - still building xDrip this week or next!
    Johan Degraeve
    @JohanDegraeve
    ok, I will give the status update here
    Pete Schwamb
    @ps2
    If you turn the xdrip support into a framework, like I do with the RileyLinkBLEKit (https://github.com/ps2/rileylink_ios/tree/master/RileyLinkBLEKit), then that would provide a path to incorporating it in to Loop.
    Martin Haeberli
    @mhaeberli
    :+1:
    @JohanDegraeve :+1: to @ps2 suggestion re framework
    Roderic Campbell
    @rodericj
    Hi, everyone. Just joined the room. Let me know how I can help out on the iOS/watchOS side of things.
    Eric Mark Martin
    @ericmarkmartin
    Welcome
    Right now I'm busy with classes so I'm not really sure what's going on, but @someoneAnyone will be the best person to adk
    *ask
    Roderic Campbell
    @rodericj
    Thanks @ericmarkmartin. I'll reach out to him directly.
    Jeremy M Lucas (GetRileyLink.org)
    @jlucasvt
    RILEYLINKS IN STOCK AND READY TO SHIP
    https://getrileylink.azurewebsites.net
    Ghost
    @ghost~581de719d73408ce4f33d2ff
    So I can't quite get everything totally figured out yet. I pre-ordered an explorer board, a 2000mah LiPo, and purchased an edison with the breakout board to flash the edison and get some things figured out before the explorer board comes into the picture. I have a deacon G4 platinum and an iPhone 6s. Will I still need to use the dexcom receiver or can xdrip substitute for this? Is xdrip support integrated into the explorer board? Is there a module I can purchase to integrate xdrip into the explorer board?
    Dana Lewis
    @danamlewis
    you might want to pop over to the intend-to-bolus channel - I’ll answer you there since it sounds openaps related.
    zadriel
    @zadriel
    .
    zadriel
    @zadriel
    Curious. Anyone done any work with the connect for IOS and 751 most recent firmware? Primarily I'm hoping for Watch application to view graphs ANd manual bolus from watch.
    chelle0207
    @chelle0207
    Is there a way to do a one-off run of autotune on iOS?
    Dana Lewis
    @danamlewis
    @chelle0207 hi - right now to do a one-off run of autotune you'll need to spin up a Linux VM (and you can do that regardless of what type of computer or phone you have). Documentation here. https://github.com/openaps/docs/blob/master/docs/docs/walkthrough/phase-4/autotune.md#phase-c-wip-running-autotune-more-easily-as-an-average-user
    chelle0207
    @chelle0207
    @danamlewis thanks!
    Kerub Querubin
    @asdfkerub
    Hello, what is the best way to save an image to mongoose db?
    Scott Leibrand
    @scottleibrand
    What is the mongoose db, and why would you want to save an image there?
    Kerub Querubin
    @asdfkerub
    Im using MEAN as a backend api
    Scott Leibrand
    @scottleibrand
    Sorry, I have no idea what you're talking about. Are you in the right room?
    Kerub Querubin
    @asdfkerub
    Oh sorry. Thanks for the reply!
    Martin Haeberli
    @mhaeberli
    I think @asdfkerub means “MongoDB"
    rsilvers129
    @rsilvers129
    I have some code which will take old data that you download from DexCom’s Clarity site, and then load it into NightScout. I think this is of general interest, so it should probably be parked somewhere on GitHub. Not sure where it should live though.
    Martin Haeberli
    @mhaeberli
    @rsilvers129 can your code for capturing clarity see calibrations, etc?
    rsilvers129
    @rsilvers129
    @mhaeberli No. I am not sure that Dexcom even has those as downloadable. But if they do, then it would be easy to have it not ignore those.
    Martin Haeberli
    @mhaeberli
    K thx